ADXL356 Military Data Sheet8/22/2018358K
ADXL356/ADXL357: Low Noise, Low Drift, Low Power, 3-Axis MEMS Accelerometers Data Sheet (Rev. A)6/5/20181 M
ADXL356-EP: Enhanced Product Data Sheet (Rev. 0)4/30/2018337 K
Features and Benefits
- Hermetic package offers optimal long-term stability
- 0 g offset vs. temperature (all axes): 0.75 mg/°C maximum
- Ultralow noise spectral density (all axes): 75 μg/√Hz
- Low power, VSUPPLY (LDO regulator enabled)
- Measurement mode: 150 μA
- Standby mode: 21 μA
- User adjustable analog output bandwidth
- Integrated temperature sensor
- Voltage range options
- VSUPPLY with internal regulators: 2.25 V to 3.6 V
- V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V typical ± 10%
- Operating temperature range: −40°C to +125°C
- 14-terminal, 6 mm × 5.6 mm × 2.2 mm, LCC package
The analog output ADXL356 and the digital output ADXL357 are low noise density, low 0 g offset drift, low power, 3-axis accelerometers with selectable measurement ranges. The ADXL356B supports the ±10 g and ±20 g ranges, the ADXL356C supports the ±10 g and ±40 g ranges, and the ADXL357 supports the ±10 g, ±20 g, and ±40 g ranges.
The ADXL356/ADXL357 offer industry leading noise, minimal offset drift over temperature, and long-term stability, enabling precision applications with minimal calibration.
The low drift, low noise, and low power ADXL357 enables accurate tilt measurement in an environment with high vibration. The low noise of the ADXL356 over higher frequencies is ideal for condition-based monitoring and other vibration sensing applications.
The ADXL357 multifunction pin names may be referenced only by their relevant function for either the serial peripheral interface (SPI) or limited I2C interface.Applications
- Inertial measurement units (IMUs)/altitude and heading reference systems (AHRSs)
- Platform stabilization systems
- Structural health monitoring
- Seismic imaging
- Tilt sensing
- Condition monitoring
Markets and Technologies
Product Lifecycle Recommended for New Designs
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
Evaluation Kits (1)
The EVAL-ADXL35x-Z are simple evaluation boards that allow quick evaluation of the performance of Analog Devices new series of low power, low noise, low drift 3-axis, MEMS accelerometers. The series consists of both analog and digital output devices, supporting a variety of Full Scale Ranges (FSR). The model descriptions are shown in the ordering guide below. These evaluation boards are ideal for evaluation of the ADXL35x accelerometer series in an existing system because the stiffness and the small size of the evaluation board minimize the effect of the board on both the system and acceleration measurements.
Features & Benefits
- 2 sets of spaced vias for populating 6-pin headers
- Easily attachable to prototyping board or PCB
- Small size and board stiffness minimize impact on the system being monitored and acceleration measurements
Documentation & Resources
Accelerate Your Condition Monitoring with Voyager 37/23/2021445 K
Building the Future of Industrial Robotics6/16/20212 M
Low Noise MEMS Accelerometers For Machine Health Monitoring4/6/2018446 K
How to Choose the Best MEMS Sensor for a Wireless Condition-Based Monitoring System—Part 2: How to Detect Mechanical Faults1/21/2022
How to Choose the Best MEMS Sensor for a Wireless Condition-Based Monitoring System—Part 111/1/2021
Managing Stress and Strain to Get the Best Performance in High Precision Tilt/Angle Sensing10/1/2020
Choose the Right Accelerometer for Predictive Maintenance6/1/2019
How Sensor Performance Enables Condition-Based Monitoring Solutions6/1/2019 Analog Dialogue
Demands on Sensors for Future Servicing: Smart Sensors for Condition Monitoring7/1/2018
MEMS Sensors for Smart Infrastructures5/18/2018
MEMS Accelerometer Performance Comes Of Age4/6/2018
How Important is Industry 4.0 for the Electronics Industry?2/1/2018
Choosing the Most Suitable Accelerometer for Your Application—Part 211/1/2017 Analog Dialogue
Choosing the Most Suitable MEMS Accelerometer for Your Application—Part 110/1/2017 Analog Dialogue
MEMS Vibration Monitoring: From Acceleration to Velocity6/6/2017 Analog Dialogue
Industry 4.0 from the Semiconductor Industry's Perspective3/1/2017 Thought Leadership
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.View our quality and reliability program and certifications for more information.
|Part Number||Material Declaration||Reliability Data||Pin/Package Drawing||CAD Symbols, Footprints & 3D Models|
|ADXL356BEZ||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356BEZ-RL||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356BEZ-RL7||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356CEZ||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356CEZ-RL||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356CEZ-RL7||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356TEZ-EP||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356TEZ-EP-RL||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|ADXL356TEZ-EP-RL7||Material Declaration||Reliability Data||14-Lead LCC (6mm x 6mm)|
|Wafer Fabrication Data|
Select a model from the dropdown below to subscribe to PCN/PDN notifications and view past notifications as well.
Support & Discussions
Sample & Buy
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Please see the latest communication from our CCO regarding lead times.
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Pricing displayed is based on 1-piece.
Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.