Alternative Parts
Overview
Features and Benefits
- Enhanced system-level ESD performance per IEC 61000-4-x
- Compatible with 3.3 V and
5.0 V operation/level translation
Low Power Operation
- 5 V operation
2.0 mA maximum @ 1 Mbps
5.6 mA maximum @ 25 Mbps
18 mA maximum @ 100 Mbps - 3.3 V operation
1.1 mA maximum @ 1 Mbps
4.2 mA maximum @ 25 Mbps
8.3 mA maximum @ 50 Mbps
- 105°C maximum operating temperature
- High data rate: dc to 100 Mbps (NRZ)
- RoHS-compliant, 8-lead SOIC
- High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals
- UL recognized: 2500 V rms for 1 minute per UL 1577
- CSA Component Acceptance Notice #5A
- VDE Certificate of Conformity
DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12
VIORM = 560 V peak
Product Details
The ADuM3100 is a digital isolator based on the Analog Devices, Inc. iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.
Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM3100 supports data rates as high as 25 Mbps and 100 Mbps.
The ADuM3100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and an edge asymmetry of <2 ns, and is compatible with temperatures up to 105°C. It operates at very low power, less than 2.0 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 μA per Mbps of data rate. Unlike other optocoupler alternatives, the ADuM3100 provides dc correctness with a patented refresh feature that continuously updates the output signal.
The ADuM3100 is offered in two grades. The ADuM3100AR and ADuM3100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively.
In comparison to the ADuM1100 digital isolator, the ADuM3100 contains various circuit and layout changes to provide increased capability relative to system-level IEC 61000-4-× testing (ESD/burst/surge). The precise capability in these tests for either the ADuM1100 or ADuM3100 is strongly determined by the design and layout of the user’s board or module. For more information, see Application Note AN-793, ESD/Latch-Up Considerations with iCoupler® Isolation Products.
APPLICATIONS
- Digital fieldbus isolation
- Opto-isolator replacement
- Computer-peripheral interface
- Microprocessor system interface
- General instrumentation and data acquisition
Product Categories
Markets and Technologies
Product Lifecycle
Production
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
Documentation & Resources
-
AN-0971: Recommendations for Control of Radiated Emissions with isoPower Devices (Rev. C)2/14/2015PDF406 kB
-
AN-913: Isolating I2C Interfaces (Rev. 0)6/20/2007PDF280 kB
-
AN-727: iCoupler® Isolation in RS-485 Applications (Rev. 0)11/1/2006PDF282 kB
-
AN-740: iCoupler® Isolation in RS-232 Applications (Rev. A)11/1/2006PDF218 K
-
AN-770: iCoupler® Isolation in CAN Bus Applications (Rev. 0)11/1/2006PDF234 kB
-
AN-793: ESD/Latch-Up Considerations with iCoupler® Isolation Products (Rev. A)11/1/2006PDF246 kB
-
AN-825: Power Supply Considerations in iCoupler® Isolation Products (Rev. 0)11/1/2006PDF181 kB
-
FAQs7/26/2017
-
Digital Isolation and Interface Technology Selection Guide2/7/2020PDF4 M
-
Enhanced Protection with the Latest iCoupler® Digital Isolation2/7/2020PDF2 M
-
CN-0196: H-Bridge Driver Circuit Using Isolated Half-Bridge Drivers6/13/2012PDF260 kB
-
Inside iCoupler® Technology:ADuM347x PWM Controller and Transformer Driver with Quad-Channel Isolators Design Summary12/10/2010PDF291 kB
-
NAppkin Note: Lowering the Power of the ADuM524x12/10/2010PDF223 kB
-
Medical Devices Demand Stringent Isolation Techniques9/28/2006
-
Isolation in Medical Applications7/1/2005PDF
-
High Speed Digital Isolators Using Microscale On-Chip Transformers9/1/2003
Reference Designs (1)
Design Resources
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
PCN-PDN Information
Sample & Buy
Ordering FAQs
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
List Pricing
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Sampling
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.