ADF7023
High Performance, Low Power, ISM Band FSK/GFSK/OOK/MSK/GMSK Transceiver IC
Top
Overview
Features and Benefits
- Ultralow power, high performance transceiver
- Frequency bands
862 MHz to 928 MHz
431 MHz to 464 MHz - Data rates supported
1 kbps to 300 kbps - 2.2 V to 3.6 V power supply
- Single-ended and differential PAs
- Low IF receiver with programmable IF bandwidths
100 kHz, 150 kHz, 200 kHz, 300 kHz
- Receiver sensitivity (BER)
−116 dBm at 1.0 kbps, 2FSK, GFSK
−107.5 dBm at 38.4 kbps, 2FSK, GFSK
−102.5 dBm at 150 kbps, GFSK, GMSK
−100 dBm at 300 kbps, GFSK, GMSK
−104 dBm at 19.2 kbps, OOK - Very low power consumption
- RF output power of −20 dBm to +13.5 dBm (single-ended PA)
- See data sheet for additional Features
Product Details
The ADF7023 is a very low power, high performance, highly integrated 2FSK/GFSK/OOK/MSK/GMSK transceiver designed for operation in the 862 MHz to 928 MHz and 431 MHz to 464 MHz frequency bands, which cover the worldwide license-free ISM bands at 433 MHz, 868 MHz, and 915 MHz. It is suitable for circuit applications that operate under the European ETSI EN300-220, the North American FCC (Part 15), the Chinese short-range wireless regulatory standards, or other similar regional standards. Data rates from 1 kbps to 300 kbps are supported.
The transmit RF synthesizer contains a VCO and a low noise fractional-N PLL with an output channel frequency resolution of 400 Hz. The VCO operates at 2× or 4×, the fundamental frequency to reduce spurious emissions. The receive and transmit synthesizer bandwidths are automatically, and independently, configured to achieve optimum phase noise, modulation quality, and settling time. The transmitter output power is programmable from −20 dBm to +13.5 dBm, with automatic PA ramping to meet transient spurious specifications. The part possesses both single-ended and differential PAs, which allows for Tx antenna diversity.
The receiver is exceptionally linear, achieving an IP3 specification of −12.2 dBm and −11.5 dBm at maximum gain and minimum gain, respectively, and an IP2 specification of 18.5 dBm and 27 dBm at maximum gain and minimum gain, respectively. The receiver achieves an interference blocking specification of 66 dB at ±2 MHz offset and 74 dB at ±10 MHz offset. Thus, the part is extremely resilient to the presence of interferers in spectrally noisy environments. The receiver features a novel, high speed, automatic frequency control (AFC) loop, allowing the PLL to find and correct any RF frequency errors in the recovered packet.
A patent pending, image rejection calibration scheme is available through a program download. The algorithm does not require the use of an external RF source nor does it require any user intervention once initiated. The results of the calibration can be stored in nonvolatile memory for use on subsequent power-ups of the transceiver.
See data sheet for additional information.
Applications
- Smart metering
- IEEE 802.15.4g
- Wireless MBUS
- Home automation
- Process and building control
- Wireless sensor networks (WSNs)
- Wireless healthcare
Product Categories
Markets and Technologies
Product Lifecycle
Not Recommended for New Designs
This designates products ADI does not recommend broadly for new designs.
Evaluation Kits (1)
Documentation & Resources
-
AN-1484: Johanson Technology Impedance Matched, Integrated Passive Filter Balun for Use with ADF7023, ADF7023-J, and ADF7024 (Rev. 0)2/8/2018PDF222K
-
AN-1394: AES Encryption and Decryption for the ADF7023 and ADF7023-J (Rev. 0)3/2/2016PDF119 K
-
AN-1309: A Range Extension Reference Design Using the ADF7023 and RFFM6901 915 MHz ISM Band Transmit Receive Module with Diversity Switch (Rev. A)5/8/2014PDF213 kB
-
AN-1292: Reed-Solomon Forward Error Correction and the ADF7023 (Rev. 0)2/4/2014PDF166 kB
-
AN-1278: Autonomous IR Calibration on the ADF7023 (Rev. 0)1/23/2014PDF131 kB
-
AN-1275: Rolling Data Buffer on the ADF7023 (Rev. 0)1/7/2014PDF89 kB
-
AN-1276: Embedded Packet Error Rate Testing on the ADF7023 and ADF7023-J (Rev. 0)1/7/2014PDF98 kB
-
Connectivity Solutions for the Internet of Things10/26/2016PDF1 M
-
Radioverse Technology and Radio Design Ecosystem Brochure7/22/2020PDF3 M
-
Intelligence at the Edge Part 4: Edge Node Security3/1/2018
-
Intelligence at the Edge Part 3: Edge Node Communication1/2/2018
-
Wirelessly Linking the Aerospace and Defense World4/1/2015
-
Wireless Technologies for Smart Meters8/1/2011
-
RF Meets Power Lines: Designing Intelligent Smart Grid Systems that Promote Energy Efficiency3/5/2010
-
Smart Metering Technology Promotes Energy Efficiency for a Greener World7/27/2009
-
Smart Metering Technology Promotes Energy Efficiency for a Greener World1/1/2009 Analog Dialogue
-
Wireless Short Range Devices and Narrowband Communications7/1/2007
-
Understand Wireless Short-Range Devices for Global License-Free Systems3/7/2007
-
The Use of Short Range Wireless in a Multi-Metering System12/1/2006PDF220 kB
-
Analog Devices: Gesture-controlled Wireless Electronic Shelf Label3/3/2022 -
Lowest Power Edge Nodes: Structural Health Monitoring7/9/2021 -
Structural Health Monitoring (SHM) Demo5/14/2021 -
Crop Connect - Environmental Monitoring for Smart Agriculture4/17/2019 -
Solutions for the Internet of Things (IoT)4/17/2019 -
Smart Crop Monitoring10/15/2018
Software & Systems Requirements
Evaluation Software
ZIP
305.16 M
ADF7023 Evaluation Board Software
This software controls the operation of the ADF7023 and ADF7023-J evaluation boards.
This software controls the operation of the ADF7023 and ADF7023-J evaluation boards. Right click on the above link and choose "Save Link As" (Mozilla / Netscape Navigator) or "Save Target As" (Internet Explorer). Once the file "ADF7023 RevX_FULL.exe" has been stored locally, double-click it to install the software.
Tools & Simulations
Design Tools
ADIsimSRD Design Studio
Analog Devices ADIsimSRD Design Studio is a very powerful tool allowing real-time simulation and optimization of many of the parameters in a typical wireless system using the ADF7xxx family of transceivers and transmitters.
Design Resources
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
PCN-PDN Information
Sample & Buy
Ordering FAQs
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
List Pricing
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Lead Times
Please see the latest communication from our CCO regarding lead times.
Sampling
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Evaluation Boards
Pricing displayed is based on 1-piece.
Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.