The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the reset mode for a fixed timeout period only, even in the event of a continuously asserted manual reset. The MAX6467/MAX6468 significantly improve system reliability compared to traditional manual reset supervisory circuits.
A variety of factory-trimmed threshold options accommodate different supply voltages and tolerances, eliminating external components. The factory-set thresholds range from +1.575V to +4.625V to monitor +5.0V, +3.3V, +3.0V, +2.5V, and +1.8V supplies with various tolerances. Reset timeout periods of 150ms (min) and 1200ms (min) are available to accommodate different µP platforms.
A single, active-low RESET output asserts when VCC drops below its threshold or if the edge-triggered active-low MR asserts low. Active-low RESET remains low for the reset timeout period after VCC rises above its threshold and for a fixed, one-shot timeout period after a manual reset input falling edge. Active-low RESET remains valid as long as VCC remains above +1V. Open-drain (MAX6467) and push-pull (MAX6468) output options provide additional flexibility in the system design.
The MAX6467/MAX6468 are offered in the space-saving 4-pin SOT143 package and the ultra-small 4-pin SC70 package and are specified over the automotive (-40°C to +125°C) temperature range.
Applications
- Automotive Products
- Cell Phones/PDAs
- Digital Cameras
- DSL Modems
- Embedded Control Systems
- Global Positioning Systems (GPS)
- Industrial Equipment
- Medical Devices
- MP3 Players
- Portable/Battery-Powered Equipment
