Save time and deliver your solutions faster with ADI’s new suite of precision technology signal chains. Align your applications ranging from Smart Industry to Instrumentation, Electrification to Digital Health, to exactly the right precision technology combinations.
Tailor your signal chain with confidence
LT1789
PRODUCTIONMicropower, Single Supply Rail-to-Rail Output Instrumentation Amplifier
- Part Models
- 8
- 1ku List Price
- Starting From $3.84
Part Details
- Micropower: 95μA Supply Current Max
- Low Input Offset Voltage: 100μV Max
- Low Input Offset Voltage Drift: 0.5μV/°C Max
- Single Gain Set Resistor:
- G = 1 to 1000 (LT1789-1)
- G = 10 to 1000 (LT1789-10)
- Inputs Common Mode to V–
- Wide Supply Range: 2.2V to 36V Total Supply
- CMRR at G = 10: 96dB Min
- Gain Error: G = 10, 0.25% Max
- Gain Nonlinearity: G = 10, 40ppm Max
- Input Bias Current: 40nA Max
- PSRR at G = 10: 100dB Min
- 1kHz Voltage Noise: 48nV/√Hz
- 0.1Hz to 10Hz Noise: 1.5μVP-P
The LT1789-1/LT1789-10 are micropower, precision instrumentation amplifiers that are optimized for single supply operation from 2.2V to 36V. The quiescent current is 95μA max, the inputs common mode to ground and the output swings within 110mV of ground. The gain is set with a single external resistor for a gain range of 1 to 1000 for the LT1789-1 and 10 to 1000 for the LT1789-10.
The high accuracy of the LT1789-1 (40ppm maximum nonlinearity and 0.25% max gain error) is unmatched by other micropower instrumentation amplifiers. The LT1789-10 maximizes both the input common mode range and dynamic output range when an amplification of 10 or greater is required, allowing precise signal processing where other instrumentation amplifiers fail to operate. The LT1789-1/LT1789-10 are laser trimmed for very low input offset voltage, low input offset voltage drift, high CMRR and high PSRR. The output can handle capacitive loads up to 400pF (LT1789-1), 1000pF (LT1789-10) in any gain configuration while the inputs are ESD protected up to 10kV (human body).
The LT1789-1/LT1789-10 are offered in the 8-pin SO package, requiring significantly less PC board area than discrete multi op amp and resistor designs.
Applications
- Portable Instrumentation
- Bridge Amplifiers
- Strain Gauge Amplifiers
- Thermocouple Amplifiers
- Differential to Single-Ended Converters
- Medical Instrumentation
Documentation
Data Sheet 1
Reliability Data 1
User Guide 1
Application Note 1
Design Note 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| LT1789CS8-1#PBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789CS8-1#TRPBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789CS8-10#PBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789CS8-10#TRPBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789IS8-1#PBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789IS8-1#TRPBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789IS8-10#PBF | 8-Lead SOIC (Narrow 0.15 Inch) | ||
| LT1789IS8-10#TRPBF | 8-Lead SOIC (Narrow 0.15 Inch) |
| Part Models | Product Lifecycle | PCN |
|---|---|---|
|
Oct 24, 2024 - 24_0246 Migrating Bottom Trace Code Marking to Top Side Laser Marking for SOIC_N Package |
||
| LT1789CS8-1#PBF | PRODUCTION | |
| LT1789CS8-1#TRPBF | PRODUCTION | |
| LT1789CS8-10#PBF | PRODUCTION | |
| LT1789CS8-10#TRPBF | PRODUCTION | |
| LT1789IS8-1#PBF | PRODUCTION | |
| LT1789IS8-1#TRPBF | PRODUCTION | |
| LT1789IS8-10#PBF | PRODUCTION | |
| LT1789IS8-10#TRPBF | PRODUCTION | |
|
Oct 12, 2022 - 22_0255 Epoxy Change from Henkel 8290 to 8290A for 8-Lead SOIC Package (PCN part 2 of 2) |
||
| LT1789CS8-1#PBF | PRODUCTION | |
| LT1789CS8-1#TRPBF | PRODUCTION | |
| LT1789CS8-10#PBF | PRODUCTION | |
| LT1789CS8-10#TRPBF | PRODUCTION | |
| LT1789IS8-1#PBF | PRODUCTION | |
| LT1789IS8-1#TRPBF | PRODUCTION | |
| LT1789IS8-10#PBF | PRODUCTION | |
| LT1789IS8-10#TRPBF | PRODUCTION | |
|
Jun 16, 2021 - 21_0026 Laser Top Mark for 8SOICN Assembled in ADPG, UTL and CRM |
||
| LT1789CS8-1#PBF | PRODUCTION | |
| LT1789CS8-1#TRPBF | PRODUCTION | |
| LT1789CS8-10#PBF | PRODUCTION | |
| LT1789CS8-10#TRPBF | PRODUCTION | |
| LT1789IS8-1#PBF | PRODUCTION | |
| LT1789IS8-1#TRPBF | PRODUCTION | |
| LT1789IS8-10#PBF | PRODUCTION | |
| LT1789IS8-10#TRPBF | PRODUCTION | |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Can't find the software or driver you need?
Request a Driver/SoftwareTools & Simulations
LTspice 1
Models for the following parts are available in LTspice:
- LT1789-1
- LT1789-10
In-Amp Diamond Plot Tool
The Diamond Plot Tool is a web application that generates a configuration-specific Output Voltage Range vs. Input Common-Mode Voltage graph, also known as the Diamond Plot, for Analog Devices Instrumentation Amplifiers. Based on user inputs such as supply voltage, gain, and input signal range, the tool detects saturation and recommends in-amps for which the input signal is in-range and the configuration is valid. Avoid saturation, find the best in-amp for your design, and save time.
Open ToolLTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.
Evaluation Kits
DIP8, MS8, S8, SOT23-6 | Multi-Footprint General Purpose Board for Single Op. Amp