Обзор

Особенности и преимущества

  • APIX2 transmitter with HDCP
    High-bandwidth Digital Content Protection (HDCP) 1.4 support with internal preprogrammed HDCP keys
    Dual-channel encryption engine supports simple daisy-chain implementation for remote displays
  • High-Definition Multimedia Interface (HDMI) receiver
    Supports all HDMI video resolutions up to the maximum APIX video link bandwidth of 2.57 Gbps
  • All mandatory and additional 3D video formats supported
  • HDCP 1.4 decryption support
  • ITU-R BT.656 Support
    8-bit ITU-R BT.656 interface with embedded timing
    720p supported at 148.5 MHz clock rate
  • Audio support
    HDMI audio extraction support
    Advanced audio muting feature
  • General
    Dual interrupt controller with APIX link status reporting
    Internal EDID RAM
  • Qualified for automotive applications
  • See data sheet for additional features

Подробнее о продукте

The ADV7680 is a high quality, single input HDMI® and single input ITU-R BT.656 receiver with an APIX®2 transmitter, compatible with APIX2 receiver technology from Inova Semiconductors. It incorporates a single port HDMI receiver that supports all mandatory and many optional 3D TV formats defined in the HDMI standard. The ITU-R BT.656 8-bit receiver supports resolutions up to 720p when using a 148.5 MHz input clock. A standard ITU-R BT.656 input clock of 27 MHz is also supported. When using the ITU-R BT.656 interface, only embedded timing is supported. There is no provision for using separate horizontal sync (Hsync) or vertical sync (Vsync) inputs􀀏 On the HDMI input, the ADV7680 supports DVI or HDMI resolutions up to a 107 MHz pixel clock at 24 BPP or a 140 MHz pixel clock at 18 BPP. However, the input format configuration for both video interfaces must be managed to ensure that the maximum total video payload for the APIX2 interface is not exceeded.

The ADV7680 integrates a consumer electronics control (CEC) controller that supports the capability discovery and control (CDC) feature.

The ADV7680 has an audio output port for the audio data extracted from the HDMI input stream. The HDMI receiver also has an advanced mute controller that prevents audible extraneous noise (pops and clicks) in the audio output. Additionally, the ADV7680 can be set to output TDM serial audio, which allows transmission of four multiplexed stereo serial audio channels on a single audio output interface port.

The following HDMI source audio formats are accessible as outputs from the ADV7680:

  • A stream from the audio serializer (two audio channels).
  • A TDM stream from the audio serializer (eight audio channels, time multiplexed). The maximum audio bit rate is 96 kHz.
  • An external master clock (MCLK) used to output audio data in stereo modes. The maximum audio bit rate is 48 kHz for sample rate converter (SRC) mode with an external MCLK.

The following audio formats are supported as inputs to the ADV7680 for transmission over the APIX2 interface:

  • One serial audio stream (two audio channels).
  • One TDM serial audio stream (eight audio channels, time multiplexed). The maximum audio bit rate is 96 kHz.
  • Two serial audio streams using a combination of the serial audio input port (I2S1) and the HDMI extracted audio (two independent stereo audio channels with asynchro-nous master clocks). On-board SRC is performed in this configuration. The maximum audio bit rate is 48 kHz in SRC modes.

The HDMI input port has 5 V detect and Hot Plug™ assert pins. The HDMI receiver also includes an integrated equalizer that ensures the robust operation of the interface with long cables, including support for Type E automotive cable assemblies and connectors.

The ADV7680 contains a main component processor (CP) that processes the video signals from the HDMI receiver port. The ADV7680 provides features such as contrast, brightness, and saturation adjustments; a standard identification (STDI) detec-tion block; and free run and synchronization alignment controls.

Fabricated in an advanced CMOS process, the ADV7680 is provided in a 9 mm × 9 mm, 64-lead surface-mount LFCSP RoHS-compliant package and is specified over the −40°C to +85°C temperature range.

The ADV7680 is offered in automotive, industrial version.

Applications

  • Automotive infotainment
  • Infotainment head units
  • Rear seat entertainment systems
  • Automotive media port applications
  • HDMI repeaters and video switches

Продукты

Области применения и технологии

For more information about the ADV7680, including the complete data sheet, contact your local Analog Devices sales office.

Статус продукта icon-recommended Рекомендовано для новых разработок

Данный продукт выпущен на рынок. Техническое описание содержит окончательные характеристики и рабочие параметры продукта. Для новых разработок ADI рекомендует применение данных продуктов.

Ресурсы проектирования

Компания Analog Devices всегда уделяла повышенное внимание обеспечению максимальных уровней качества и надежности предлагаемых продуктов. Для этого мы внедряем контроль качества и надежности на каждом этапе проектирования технологических процессов и продуктов, а также на этапе производства. Нашим принципом является обеспечение "полного отсутствия дефектов" поставляемых компонентов.

Обсуждения

ADV7680 Обсуждения

ADV7680 Не смогли найти, что искали? Спросите в сообществе Analog »

Образцы и покупка

Функционирование раздела Образцы и покупка возможно только в полной версии сайта
Назад
Проверить наличие


Приведенные цены действительны в США и указаны только для примерного бюджетного рассчета. Цены указаны в долларах США (за штуку в указанном размере партии) и могут быть изменены. Цены в других регионах могут отличаться в зависимости от местных пошлин, налогов, сборов и курсов валют. Для уточнения стоимости обращайтесь в местные офисы продаж Analog Devices, или к официальным дистрибьюторам. Цены на оценочные платы и наборы указаны за штуку независимо от количества.


Помощь