Обзор

Особенности и преимущества

  • Single-chip multiband 3G transceiver
    3GPP 25.104 release 9 WCDMA/HSPA compatible
  • UMTS band coverage
    Local area Class BS in Band I to Band VI and Band VIII to Band X
  • Direct conversion transmitter and receiver
  • WCDMA and GSM receive baseband filter options
  • Easy to use with minimal calibration
    Automatic Rx DC offset control
    Simple gain, frequency, mode programming
  • Low supply current
    50 mA typical Rx current
    50 mA to 100 mA Tx current (varies with output power)
  • 6 mm × 6 mm 40-pin LFCSP package
  • Minimal external components
    Integrated multiband multimode monitoring
    No Tx SAW or Rx interstage SAW filters
    Integrated power management
    Integrated synthesizers, including PLL loop filters
    Integrated PA bias control DACs/GPOs
  • See data sheet for additional Features

Подробнее о продукте

The ADF4602 is a 3G transceiver integrated circuit (IC) offering unparalleled integration and feature set. The IC is ideally suited to high performance 3G femtocells providing cellular fixed mobile converged (FMC) services. With only a handful of external components, a full multiband transceiver is implemented.

UMTS Band 1 through Band 6 and Band 8 through Band 10 are supported in a single device.

The receiver is based on a direct conversion architecture. This architecture is the ideal choice for highly integrated wideband CDMA (WCDMA) receivers, reducing the bill of materials by fully integrating all interstage filtering. The front end includes three high performance, single-ended low noise amplifiers (LNAs), allowing the device to support tri-band applications. The single-ended input structure eases interface and reduces the matching components required for small footprint single-ended duplexers. The excellent device linearity achieves good performance with a large range of SAW and ceramic filter duplexers.

The integrated receive baseband filters offer selectable bandwidth, enabling the device to receive both WCDMA and GSM-EDGE radio signals. The selectable bandwidth filter, coupled with the multiband LNA input structure, allows GSM-EDGE signals to be monitored as part of a UMTS home basestation.

The transmitter uses an innovative direct conversion modulator that achieves high modulation accuracy with exceptionally low noise, eliminating the need for external transmit SAW filters.

The fully integrated phase lock loops (PLLs) provide high performance and low power fractional-N frequency synthesis for both receive and transmit sections. Special precautions have been taken to provide the isolation demanded by frequency division duplex (FDD) systems. All VCO and loop filter components are fully integrated.

The ADF4602 also contains on-chip low dropout voltage regulators (LDOs) to deliver regulated supply voltages to the functions on chip, with an input voltage of between 3.1 V and 3.6 V.

The IC is controlled via a standard 3-wire serial interface with advanced internal features allowing simple software programming. Comprehensive power-down modes are included to minimize power consumption in normal use.

Applications

  • 3G home basestations (femtocells)
This product is designed for a highly specific application. The detailed data sheet contains information about proprietary technology, and is only available to customers whose requirements closely match this application and will require a separate NDA. To request a data sheet, please contact the Integrated Transceivers Development Group and provide the following information: end application, annual usage/year, and baseband development strategy.

Unfortunately, we are unable to respond to requests that do not meet our qualification criteria. Technical support for this product is NOT available from our normal Tech Support desk.

Статус продукта icon-not-recommended Не рекомендовано для новых разработок

ADI не рекомендует использование данных продуктов в новых разработках.

Инструменты и симуляторы

Инструменты проектирования

ADIsimPLL™

Инструмент ADIsimPLL предназначен для быстрого и достоверного оценивания характеристик новых высококачественных синтезаторов с ФАПЧ компании Analog Devices. Этот инструмент обладает наибольшим набором возможностей среди доступных на сегодняшний день инструментов проектирования и моделирования синтезаторов с ФАПЧ. С его помощью можно моделировать все ключевые нелинейные эффекты, способные влиять на характеристики синтезаторов с ФАПЧ. ADIsimPLL позволяет исключить, по меньшей мере, одну итерацию из процесса проектирования, сокращая, тем самым, цикл от задумки концепции проекта до выпуска устройства на рынок.

ADIsimRF

С помощью инструмента проектирования ADIsimRF компании Analog Devices можно рассчитать наиболее важные параметры ВЧ сигнальных цепочек, такие как покаскадный коэффициент усиления, параметры шумов, IP3, точку компрессии 1 дБ и полную потребляемую мощность.

Ресурсы проектирования

Компания Analog Devices всегда уделяла повышенное внимание обеспечению максимальных уровней качества и надежности предлагаемых продуктов. Для этого мы внедряем контроль качества и надежности на каждом этапе проектирования технологических процессов и продуктов, а также на этапе производства. Нашим принципом является обеспечение "полного отсутствия дефектов" поставляемых компонентов.

Обсуждения

ADF4602 Обсуждения

ADF4602 Не смогли найти, что искали? Спросите в сообществе Analog »