Getting Started with LTspice

If you are new to LTspice, this seminar is for you. This seminar covers the fundamentals of drafting circuits in the schematic editor and how-to bring circuits to life through simulation. It includes an overview of available examples and reference design resources, drafting a schematic, transient and AC analysis simulations, probing and performing measurements in the waveform viewer, and a guide to additional educational resources.

Learning Objectives:

  • Benefits of LTspice
  • Examples and reference designs libraries
  • Using the schematic editor
  • Running and probing a schematic
  • Basic measurements and calculations
  • Simulating a Transient Response
  • Additional resources

Other webcast in this series:

View This Webcast
( Требуется регистрация )

Charly El-Khoury is an applications engineer with the High Speed Group at Analog Devices, Inc. He has been with ADI since February 2007 and is responsible for Low Noise, Low Distortion Amplifiers as well as precision ADC drivers. He has a Master's of Science in Electrical and Computer Engineering (MSECE) from Worcester Polytechnic Institute.