Меню
Закрыть
Terasic Innovate FPGA Design Contest
Обзор
Особенности и преимущества
- Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
- Our reference designs are supported by an intuitive design tool set and IP
- Our team can provide designs for quick prototypes that can speed time to market in the most complex applications
Продукты
Продукты
Материалы по теме
Технические статьи (1)
Описание схемы
Welcome to the Innovate FPGA & SoC Design Contest held by Terasic, Analog Devices & Intel. For the past 14 years, this contest has inspired thousands of aspiring engineers to design, to create, and innovate!
YOU MAY PICK 3 FREE LTC / ADI PLUG-IN BOARDS (EITHER FROM THE ARDUINO OR QUIKEVAL CATEGORIES)
Real-World Plug-ins for the Terasic DE10-Nano Kit
1) Arduino Plug-Ins: Circuits from the Lab
Analog Devices application experts have developed over a hundred reference designs to bridge the physical and digital with unmatched technologies that sense, measure and connect.
These circuits can be used as standalone solutions, or combined to build more complex systems.
Use the Arduino compatible headers on the DE10-Nano to plug-in a variety of precision signal chain solutions from Analog Devices. See a few examples of Arduino Plug-In boards below:
| Part Number | General Description of Part |
|
| EVAL-CN0216-ARDZ | Precision Weigh Scale |
|
| EVAL-CN0357-ARDZ | Electrochemical Gas Detection |
|
| EVAL-CN0338-ARDZ | NDIR Thermopile Gas Sensing | |
| EVAL-ADXL362-ARDZ | Ultra-Low Power Accelerometer |
|
| EVAL-CN0391-ARDZ | 4-Channel Thermocouple System |
|
| EVAL-CN0395-ARDZ | Volatile Organic Compound Gas Detector |
|
| EVAL-CN0396-ARDZ | Dual Electrochemical Gas Sensor | |
| EVAL-CN0397-ARDZ | 3-Channel Light Detection for Smart Agriculture |
|
| EVAL-CN0398-ARDZ | Soil Moisture and pH Measurement System |
|
2) QuikEval Plug-Ins: Connecting To LTC 2x7 QuikEval Header
The DE10-Nano includes an LTC 2x7 QuikEval header that is compatible with over a hundred of Analog Devices evaluation boards from the legacy Linear Technology product lines. Some of these parts may be an "enabling technology" for your design, such as a precision ADC or DAC, or a low-noise PLL for a communications system. Other products perform critical auxiliary functions, such as system health monitoring (supply current, supply voltage, temperature etc.).
Click here to see over a hundred boards that connect to the LTC 2x7 QuikEval header.
The SPI or I2C signals on the DE10-Nano's QuikEval connector are connected to the HPS side of the Cyclone V SoC device. This means that you will most likely communicate to these devices from within the Linux operating system running on the embedded processor.
For parts without a Linux driver, it is possible to communicate directly through the /dev/i2c and /dev/spi device files. In both cases, there is Linduino / Arduino code that can be used as a starting point for writing your own code. Linduino / Arduino code is intended for porting to "bare metal" (no operating system) embedded applications, but is still useful in gaining insight into how a particular device functions.
| Part Number | QuikEval Board | Description of the QuikEval Board |
| LTC2984 | DC2420A | Starter kit demonstrates the performance and ease of use of the LTC2984, which is a complete temperature measurement system on a chip |
| LTC2668 | DC2025A-A |
DC2025A features the LTC2668, 16-channel 16-Bit/12-Bit ±10V VOUT SoftSpan™ DACs with 10ppm/°C max reference. This device features per-channel SoftSpan configuration with five output ranges: |
| LTC2358-18 | DC2365A-A | DC2365A features the LTC2358-18, Buffered Octal, 18-Bit, 200ksps/Ch Differential ±10.24V ADC with 30VP-P Common Mode Range |
| LTC2497 | DC1012A-B | DC1012A-B features the LTC2497 - 16-Bit 8-/16-Channel Delta Sigma ADC with Easy Drive Input Current Cancellation and I2C Interface |
| LTC2378-20 | DC2135A | DC2135A shows a simple DC accurate ADC driver circuit that converts a ±10V single-ended input signal into a fully differential signal capable of driving the LTC2378-20 with a combined linearity error of only 2ppm |
To see over a hundred boards that are compatible with the LTC 2x7 QuikEval header, click here.
Обсуждения
Образцы
Образцы
|
Продукт |
Описание |
Доступный продукт
|
| LTC2378-20 | 20-Bit, 1Msps, Low Power SAR ADC with 0.5ppm INL |
LTC2378CDE-20#PBF LTC2378CMS-20#PBF LTC2378IDE-20#PBF LTC2378IMS-20#PBF |
| LTC2497 | 16-Bit 8-/16-Channel ΔΣ ADC with Easy Drive Input Current Cancellation and I2C Interface |
LTC2497CUHF#PBF LTC2497IUHF#PBF |
| LTC2358-18 | Buffered Octal, 18-Bit, 200ksps/Ch Differential ±10.24V ADC with 30VP-P Common Mode Range |
LTC2358CLX-18#PBF LTC2358HLX-18#PBF LTC2358ILX-18#PBF |
| LTC2668 | 16-Channel 16-/12-Bit ±10V VOUT SoftSpan DACs with 10ppm/°C Max Reference |
LTC2668CUJ-12#PBF LTC2668CUJ-16#PBF LTC2668HUJ-12#PBF LTC2668HUJ-16#PBF LTC2668IUJ-12#PBF LTC2668IUJ-16#PBF |
| LTC2984 | Multi-Sensor High Accuracy Digital Temperature Measurement System with EEPROM |
LTC2984CLX#PBF LTC2984HLX#PBF LTC2984ILX#PBF |
