Обзор

Особенности и преимущества

  • CrossCore Serial Flash Programmer.
    • Supports erasing and re-programming flash memory via UART.
    • Supports: ADSP-SC5xx, ADSP-21569, ADSP-CM40x, ADSP-CM41x, ADuCM302x, ADuCM4050 processors.
  • Elf2ldr
    • Supports conversion of executables into .ldr-format streams.
    • Supports:
      • ADSP-CM40x processors (for creating new boot images).
      • ADSP-CM41x processors (for loading the Cortex-M0 core from the Cortex-M4 core at runtime).
      • ADSP-SC5xx processors (for loading SHARC+ cores from the Cortex-A5 core at runtime).
  • CRC tool
    • Computes the CRC of the executable image, for secure booting.
    • Supports: ADSP-CM41x and ADuCM302x processors.
  • UART Baud rate calculator
    • Supports: ADuCM302x processors.

Подробнее о продукте

CrossCore® Utilities collects a number of standalone utilities that have previously been provided as part of other products, such as the Board Support Packages that enable Analog Devices processors within the IAR Embedded Workbench toolchain, or the Device Family Packs that enable Analog Devices processors within the Keil μVision toolchain. This distribution provides a single, convenient package for future updates.

This product is intended for use with IAR and Keil toolchains; CrossCore Embedded Studio is not required in order to use CrossCore Utilities.

Downloads And Related Software

Загружаемые ресурсы

CrossCore® Utilities (Rev. 1.5.0)
Keil Microcontroller Development Kit

Refer to "Getting Started Guide and Installation Checklist" for information on exact version supported and other Installation requirements.

IAR EWARM

IAR EWARM evaluation version integrated software development tool.

Инструменты разработки ПО

CrossCore Embedded Studio

CrossCore Embedded Studio – это интегрированная среда разработки (IDE) мирового уровня для процессоров семейств Blackfin и SHARC.

Программные модули

CrossCore Serial Flash Programmer

CrossCore Serial Flash Programmer (CCSFP) is a standalone application for programming, erasing and re-programming the on-board flash of mixed-signal processors, via the UART interface. From release 1.3.0 onwards, CCSFP is released as part of the CrossCore Utilities product.

Systems Requirements

  • Microsoft Windows 7 Professional/Enterprise/Ultimate (32- or 64-bit)
  • Minimum of 1MB hard disk (HDD) space.

Related Hardware (8)

Development Platform

Наборы EZ-Kit

Посмотреть все 7 Наборы EZ-Kit