---
type: Analog Component
title: "ADA4522-2 — 55 V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers"
description: "55 V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers"
resource: "https://www.analog.com/en/products/ada4522-2.html"
tags: ["datasheet", "adi"]
status: draft
sources:
  - id: "datasheet"
    resource: "https://www.analog.com/media/en/technical-documentation/data-sheets/ada4522-2.pdf"
    title: "ADA4522-2 data sheet"
    author: "team:analog-devices"
tables:
  - file: "ada4522-2/tables/table-00-p2-data.csv"
    title: "Table 1. Related Products – Zero Drift Op Amps (<0.1µV/°C)"
    page: 2
  - file: "ada4522-2/tables/table-01-p5-spec.csv"
    title: "Table 2. Electrical Characteristics (V_{SY} = 5.0 V, V_{CM} = V_{SY}/2 V, T_{A} = 25°C, unless otherwise specified.)"
    page: 5
  - file: "ada4522-2/tables/table-02-p8-spec.csv"
    title: "Table 3. Electrical Characteristics (V_{SY} = 30 V, V_{CM} = V_{SY}/2 V, T_{A} = 25°C, unless otherwise specified.)"
    page: 8
  - file: "ada4522-2/tables/table-03-p11-spec.csv"
    title: "Table 4. Electrical Characteristics (V_{SY} = 55 V, V_{CM} = V_{SY}/2 V, T_{A} = 25°C, unless otherwise specified.)"
    page: 11
  - file: "ada4522-2/tables/table-04-p14-abs_max.csv"
    title: "Table 5. Absolute Maximum Ratings"
    page: 14
  - file: "ada4522-2/tables/table-05-p14-data.csv"
    title: "Table 6. Thermal Resistance"
    page: 14
  - file: "ada4522-2/tables/table-06-p15-pin.csv"
    title: "Table 7. ADA4522-1 Pin Function Descriptions"
    page: 15
  - file: "ada4522-2/tables/table-07-p15-pin.csv"
    title: "Table 8. ADA4522-2 Pin Function Descriptions"
    page: 15
  - file: "ada4522-2/tables/table-08-p16-pin.csv"
    title: "Table 9. ADA4522-4 Pin Function Descriptions"
    page: 16
  - file: "ada4522-2/tables/table-09-p37-data.csv"
    title: "Table 10. Thermal Noise Contribution Example"
    page: 37
  - file: "ada4522-2/tables/table-10-p43-data.csv"
    title: "Table 11. Amplifier Output Railing Workaround Recommendations"
    page: 43
  - file: "ada4522-2/tables/table-11-p46-data.csv"
    title: "Table 12. Ordering Guide"
    page: 46
  - file: "ada4522-2/tables/table-12-p47-data.csv"
    title: "Revision History"
    page: 47
figures:
  - file: "ada4522-2/figures/ada4522-2-f001.png"
    caption: "Figure 1. Voltage Noise Density vs. Frequency, V_{SY} = 5 V, 30 V, 55 V"
    type: "characteristic_curve"
    page: 1
  - file: "ada4522-2/figures/ada4522-2-f002.png"
    caption: "Figure 2. 8-Lead MSOP (RM Suffix) and 8-Lead SOIC (R Suffix) Pin Configuration"
    type: "pinout"
    page: 2
  - file: "ada4522-2/figures/ada4522-2-f004.png"
    caption: "Figure 3. ADA4522-1 Pin Configuration"
    type: "pinout"
    page: 15
  - file: "ada4522-2/figures/ada4522-2-f005.png"
    caption: "Figure 4. ADA4522-2 Pin Configuration"
    type: "pinout"
    page: 15
  - file: "ada4522-2/figures/ada4522-2-f006.png"
    caption: "Figure 5. ADA4522-4 Pin Configuration"
    type: "pinout"
    page: 16
  - file: "ada4522-2/figures/ada4522-2-f007.png"
    caption: "Figure 6. Input Offset Voltage Distribution, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 17
  - file: "ada4522-2/figures/ada4522-2-f008.png"
    caption: "Figure 8. Input Offset Voltage Distribution, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 17
  - file: "ada4522-2/figures/ada4522-2-f009.png"
    caption: "Figure 10.Input Offset Voltage Distribution, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 17
  - file: "ada4522-2/figures/ada4522-2-f010.png"
    caption: "Figure 7. Input Offset Voltage Drift Distribution, V_{SY} = ±2.5V"
    type: "characteristic_curve"
    page: 17
  - file: "ada4522-2/figures/ada4522-2-f011.png"
    caption: "Figure 9. Input Offset Voltage Drift Distribution, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 17
  - file: "ada4522-2/figures/ada4522-2-f012.png"
    caption: "Figure 11.Input Offset Voltage Drift Distribution, V_{SY} = ±27.5V"
    type: "characteristic_curve"
    page: 17
  - file: "ada4522-2/figures/ada4522-2-f013.png"
    caption: "Figure 12.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V"
    type: "characteristic_curve"
    page: 18
  - file: "ada4522-2/figures/ada4522-2-f014.png"
    caption: "Figure 14.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V"
    type: "characteristic_curve"
    page: 18
  - file: "ada4522-2/figures/ada4522-2-f015.png"
    caption: "Figure 16.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V"
    type: "characteristic_curve"
    page: 18
  - file: "ada4522-2/figures/ada4522-2-f016.png"
    caption: "Figure 13.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V"
    type: "characteristic_curve"
    page: 18
  - file: "ada4522-2/figures/ada4522-2-f017.png"
    caption: "Figure 15.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V"
    type: "characteristic_curve"
    page: 18
  - file: "ada4522-2/figures/ada4522-2-f018.png"
    caption: "Figure 17.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V"
    type: "characteristic_curve"
    page: 18
  - file: "ada4522-2/figures/ada4522-2-f019.png"
    caption: "Figure 18.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 19
  - file: "ada4522-2/figures/ada4522-2-f020.png"
    caption: "Figure 20.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 19
  - file: "ada4522-2/figures/ada4522-2-f021.png"
    caption: "Figure 22.Output Voltage High (V_{OH}) to Supply Rail vs. Load Current (I_{LOAD})"
    type: "characteristic_curve"
    page: 19
  - file: "ada4522-2/figures/ada4522-2-f022.png"
    caption: "Figure 19.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 19
  - file: "ada4522-2/figures/ada4522-2-f023.png"
    caption: "Figure 21.Supply Current (I_{SY}) per Amplifier vs. Supply Voltage (V_{SY})"
    type: "characteristic_curve"
    page: 19
  - file: "ada4522-2/figures/ada4522-2-f024.png"
    caption: "Figure 23.Output Voltage Low (V_{OL}) to Supply Rail vs. Load Current (I_{LOAD})"
    type: "characteristic_curve"
    page: 19
  - file: "ada4522-2/figures/ada4522-2-f025.png"
    caption: "Figure 24.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 20
  - file: "ada4522-2/figures/ada4522-2-f026.png"
    caption: "Figure 26.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 20
  - file: "ada4522-2/figures/ada4522-2-f027.png"
    caption: "Figure 28.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 20
  - file: "ada4522-2/figures/ada4522-2-f028.png"
    caption: "Figure 25.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 20
  - file: "ada4522-2/figures/ada4522-2-f029.png"
    caption: "Figure 27.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 20
  - file: "ada4522-2/figures/ada4522-2-f030.png"
    caption: "Figure 29.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 20
  - file: "ada4522-2/figures/ada4522-2-f033.png"
    caption: "Figure 42.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 23
  - file: "ada4522-2/figures/ada4522-2-f034.png"
    caption: "Figure 44.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 23
  - file: "ada4522-2/figures/ada4522-2-f035.png"
    caption: "Figure 46.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 23
  - file: "ada4522-2/figures/ada4522-2-f036.png"
    caption: "Figure 43.Channel Separation vs. Frequency, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 23
  - file: "ada4522-2/figures/ada4522-2-f037.png"
    caption: "Figure 45.Channel Separation vs. Frequency, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 23
  - file: "ada4522-2/figures/ada4522-2-f038.png"
    caption: "Figure 47.Channel Separation vs. Frequency, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 23
  - file: "ada4522-2/figures/ada4522-2-f043.png"
    caption: "Figure 70.Output Voltage Swing vs. Frequency"
    type: "characteristic_curve"
    page: 27
  - file: "ada4522-2/figures/ada4522-2-f044.png"
    caption: "Figure 71.ADA4522-1/ADA4522-2/ADA4522-4 Architecture Block Diagram"
    type: "block_diagram"
    page: 28
  - file: "ada4522-2/figures/ada4522-2-f045.png"
    caption: "Figure 72.Input EMI Filter and Clamp Circuit"
    type: "block_diagram"
    page: 29
  - file: "ada4522-2/figures/ada4522-2-f046.png"
    caption: "Figure 73.Input and Output Waveforms, No Phase Reversal"
    type: "scope_capture"
    page: 31
  - file: "ada4522-2/figures/ada4522-2-f047.png"
    caption: "Figure 74.Large Signal Transient Response Example"
    type: "scope_capture"
    page: 32
  - file: "ada4522-2/figures/ada4522-2-f048.png"
    caption: "Figure 75.Circuit Diagram for Large Signal Transient Response"
    type: "test_circuit"
    page: 32
  - file: "ada4522-2/figures/ada4522-2-f049.png"
    caption: "Figure 76.Voltage Noise Density with Various Gains"
    type: "characteristic_curve"
    page: 34
  - file: "ada4522-2/figures/ada4522-2-f050.png"
    caption: "Figure 77.Voltage Noise Density with Post Filters"
    type: "characteristic_curve"
    page: 34
  - file: "ada4522-2/figures/ada4522-2-f051.png"
    caption: "Figure 78.Current Noise Density at Gain = 1"
    type: "characteristic_curve"
    page: 35
  - file: "ada4522-2/figures/ada4522-2-f052.png"
    caption: "Figure 79.EMIRR vs. Frequency"
    type: "characteristic_curve"
    page: 36
  - file: "ada4522-2/figures/ada4522-2-f053.png"
    caption: "Figure 80.Stability Compensation with Isolating Resistor, R_{ISO}"
    type: "application_circuit"
    page: 36
  - file: "ada4522-2/figures/ada4522-2-f054.png"
    caption: "Figure 81.Small Signal Overshoot vs. Load Capacitance with Various Output Isolating Resistors"
    type: "characteristic_curve"
    page: 36
  - file: "ada4522-2/figures/ada4522-2-f055.png"
    caption: "Figure 82.Discrete 3-Op-Amp Instrumentation Amplifier"
    type: "application_circuit"
    page: 37
  - file: "ada4522-2/figures/ada4522-2-f056.png"
    caption: "Figure 83.Precision Weigh Scale Measurement System"
    type: "test_circuit"
    page: 39
  - file: "ada4522-2/figures/ada4522-2-f057.png"
    caption: "Figure 84.Low-Side Current Sensing Circuit"
    type: "application_circuit"
    page: 39
  - file: "ada4522-2/figures/ada4522-2-f058.png"
    caption: "Figure 85.Mismatch in Seebeck Voltages Causes Seebeck Voltage Error"
    type: "layout_drawing"
    page: 40
  - file: "ada4522-2/figures/ada4522-2-f059.png"
    caption: "Figure 86.Comparator Configuration A"
    type: "application_circuit"
    page: 41
  - file: "ada4522-2/figures/ada4522-2-f060.png"
    caption: "Figure 87.Comparator Configuration B"
    type: "application_circuit"
    page: 41
  - file: "ada4522-2/figures/ada4522-2-f061.png"
    caption: "Figure 88.Supply Current (I_{SY}) per Dual Amplifier vs. Supply Voltage (V_{SY}) (ADA4522-1/ADA4522-2/ADA4522-4 as a Comparator)"
    type: "characteristic_curve"
    page: 42
  - file: "ada4522-2/figures/ada4522-2-f062.png"
    caption: "Figure 89.Insert RF When Large RS is Use"
    type: "application_circuit"
    page: 42
  - file: "ada4522-2/figures/ada4522-2-f063.png"
    caption: "Figure 90.8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters"
    type: "other"
    page: 44
  - file: "ada4522-2/figures/ada4522-2-f064.png"
    caption: "Figure 91.8-Lead Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches)"
    type: "other"
    page: 44
  - file: "ada4522-2/figures/ada4522-2-f065.png"
    caption: "Figure 92. 14-Lead Small Outline Package [SOIC\\_N] Narrow Body (R-14) Dimensions shown in millimeters and (inches)"
    type: "other"
    page: 45
  - file: "ada4522-2/figures/ada4522-2-f066.png"
    caption: "Figure 93.14-Lead Thin Shrink Small Outline Package [TSSOP] (RU-14) Dimensions shown in millimeters"
    type: "other"
    page: 45
  - file: "ada4522-2/figures/ada4522-2-f067.png"
    caption: "Figure 31.PSRR vs. Frequency"
    type: "characteristic_curve"
    page: 21
  - file: "ada4522-2/figures/ada4522-2-f068.png"
    caption: "Figure 30.CMRR vs. Frequency"
    type: "characteristic_curve"
    page: 21
  - file: "ada4522-2/figures/ada4522-2-f069.png"
    caption: "Figure 32.Closed-Loop Output Impedance vs. Frequency"
    type: "characteristic_curve"
    page: 21
  - file: "ada4522-2/figures/ada4522-2-f070.png"
    caption: "Figure 33.Supply Current (I_{SY}) per Amplifier vs. Temperature, V_{SY} = 5V, 30V, 55V"
    type: "characteristic_curve"
    page: 21
  - file: "ada4522-2/figures/ada4522-2-f071.png"
    caption: "Figure 34.Open-Loop Gain and Phase Margin vs. Frequency Figure 35.Closed-Loop Gain vs. Frequency"
    type: "characteristic_curve"
    page: 21
  - file: "ada4522-2/figures/ada4522-2-f072.png"
    caption: "Figure 35.Closed-Loop Gain vs. Frequency"
    type: "characteristic_curve"
    page: 21
  - file: "ada4522-2/figures/ada4522-2-f073.png"
    caption: "Figure 37.Small Signal Transient Response, V_{SY} = ±2.5 V"
    type: "scope_capture"
    page: 22
  - file: "ada4522-2/figures/ada4522-2-f074.png"
    caption: "Figure 36.Large Signal Transient Response, V_{SY} = ±2.5 V"
    type: "scope_capture"
    page: 22
  - file: "ada4522-2/figures/ada4522-2-f075.png"
    caption: "Figure 38.Large Signal Transient Response, V_{SY} = ±15 V"
    type: "scope_capture"
    page: 22
  - file: "ada4522-2/figures/ada4522-2-f076.png"
    caption: "Figure 39.Small Signal Transient Response, V_{SY} = ±15 V"
    type: "scope_capture"
    page: 22
  - file: "ada4522-2/figures/ada4522-2-f077.png"
    caption: "Figure 40.Large Signal Transient Response, V_{SY} = ±27.5 V"
    type: "scope_capture"
    page: 22
  - file: "ada4522-2/figures/ada4522-2-f078.png"
    caption: "Figure 41.Small Signal Transient Response, V_{SY} = ±27.5 V"
    type: "scope_capture"
    page: 22
  - file: "ada4522-2/figures/ada4522-2-f079.png"
    caption: "Figure 49.THD + N vs. Frequency, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 24
  - file: "ada4522-2/figures/ada4522-2-f080.png"
    caption: "Figure 48.THD + N vs. Amplitude, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 24
  - file: "ada4522-2/figures/ada4522-2-f081.png"
    caption: "Figure 50.THD + N vs. Amplitude, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 24
  - file: "ada4522-2/figures/ada4522-2-f082.png"
    caption: "Figure 51.THD + N vs. Frequency, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 24
  - file: "ada4522-2/figures/ada4522-2-f083.png"
    caption: "Figure 52.THD + N vs. Amplitude, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 24
  - file: "ada4522-2/figures/ada4522-2-f084.png"
    caption: "Figure 53.THD + N vs. Frequency, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 24
  - file: "ada4522-2/figures/ada4522-2-f085.png"
    caption: "Figure 55.Negative Overload Recovery, V_{SY} = ±2.5 V"
    type: "scope_capture"
    page: 25
  - file: "ada4522-2/figures/ada4522-2-f086.png"
    caption: "Figure 54.Positive Overload Recovery, V_{SY} = ±2.5 V"
    type: "scope_capture"
    page: 25
  - file: "ada4522-2/figures/ada4522-2-f087.png"
    caption: "Figure 56.Positive Overload Recovery, V_{SY} = ±15 V"
    type: "scope_capture"
    page: 25
  - file: "ada4522-2/figures/ada4522-2-f088.png"
    caption: "Figure 57.Negative Overload Recovery, V_{SY} = ±15 V"
    type: "scope_capture"
    page: 25
  - file: "ada4522-2/figures/ada4522-2-f089.png"
    caption: "Figure 58.Positive Overload Recovery, V_{SY} = ±27.5 V"
    type: "scope_capture"
    page: 25
  - file: "ada4522-2/figures/ada4522-2-f090.png"
    caption: "Figure 59.Negative Overload Recovery, V_{SY} = ±27.5 V"
    type: "scope_capture"
    page: 25
  - file: "ada4522-2/figures/ada4522-2-f091.png"
    caption: "Figure 61.Voltage Noise Density vs. Frequency, V_{SY} = 5V, 30V,"
    type: "characteristic_curve"
    page: 26
  - file: "ada4522-2/figures/ada4522-2-f092.png"
    caption: "Figure 60.Voltage Noise Density vs. Frequency, V_{SY} = ±2.5 V"
    type: "characteristic_curve"
    page: 26
  - file: "ada4522-2/figures/ada4522-2-f093.png"
    caption: "Figure 62.Voltage Noise Density vs. Frequency, V_{SY} = ±15 V"
    type: "characteristic_curve"
    page: 26
  - file: "ada4522-2/figures/ada4522-2-f094.png"
    caption: "Figure 63.0.1 Hz to 10 Hz Noise"
    type: "scope_capture"
    page: 26
  - file: "ada4522-2/figures/ada4522-2-f095.png"
    caption: "Figure 64.Voltage Noise Density vs. Frequency, V_{SY} = ±27.5 V"
    type: "characteristic_curve"
    page: 26
  - file: "ada4522-2/figures/ada4522-2-f096.png"
    caption: "Figure 65.Current Noise Density vs. Frequency"
    type: "characteristic_curve"
    page: 26
  - file: "ada4522-2/figures/ada4522-2-f097.png"
    caption: "Figure 66.Negative Settling Time to 0.1%, V_{SY} = ±2.5 V"
    type: "scope_capture"
    page: 27
  - file: "ada4522-2/figures/ada4522-2-f098.png"
    caption: "Figure 67.Positive Settling Time to 0.1%, V_{SY} = ±2.5 V"
    type: "scope_capture"
    page: 27
  - file: "ada4522-2/figures/ada4522-2-f099.png"
    caption: "Figure 68.Negative Settling Time to 0.1%, V_{SY} = ±15 V and ±27.5 V"
    type: "scope_capture"
    page: 27
  - file: "ada4522-2/figures/ada4522-2-f100.png"
    caption: "Figure 69.Positive Settling Time to 0.1%, V_{SY} = ±15 V and ±27.5 V"
    type: "scope_capture"
    page: 27
  - file: "ada4522-2/figures/ada4522-2-eq01.png"
    caption: "Equation as printed (p. 29)"
    type: equation
    page: 29
  - file: "ada4522-2/figures/ada4522-2-eq02.png"
    caption: "Equation as printed (p. 29)"
    type: equation
    page: 29
  - file: "ada4522-2/figures/ada4522-2-eq03.png"
    caption: "Equation as printed (p. 33)"
    type: equation
    page: 33
  - file: "ada4522-2/figures/ada4522-2-eq04.png"
    caption: "Equation as printed (p. 33)"
    type: equation
    page: 33
  - file: "ada4522-2/figures/ada4522-2-eq05.png"
    caption: "Equation as printed (p. 35)"
    type: equation
    page: 35
curves:
  - file: "ada4522-2/curves/channel-separation-vs-frequency-vsy-15-v.csv"
    caption: "Figure 45.Channel Separation vs. Frequency, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f037.png"
    page: 23
    x_unit: "kHz"
    y_unit: "dB"
    conditions: "VSY = ±15V, AV = -10, RL = 10kΩ"
  - file: "ada4522-2/curves/channel-separation-vs-frequency-vsy-2-5-v.csv"
    caption: "Figure 43.Channel Separation vs. Frequency, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f036.png"
    page: 23
    x_unit: "kHz"
    y_unit: "dB"
    conditions: "VSY = ±2.5V, AV = -10, RL = 10kΩ"
  - file: "ada4522-2/curves/channel-separation-vs-frequency-vsy-27-5-v.csv"
    caption: "Figure 47.Channel Separation vs. Frequency, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f038.png"
    page: 23
    x_unit: "kHz"
    y_unit: "dB"
    conditions: "VSY = ±27.5V, AV = -10, RL = 10kΩ"
  - file: "ada4522-2/curves/closed-loop-gain-vs-frequency.csv"
    caption: "Figure 35.Closed-Loop Gain vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f072.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dB"
    conditions: "VSY = ±2.5V TO ±27.5V"
  - file: "ada4522-2/curves/closed-loop-output-impedance-vs-frequency.csv"
    caption: "Figure 32.Closed-Loop Output Impedance vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f069.png"
    page: 21
    x_unit: "Hz"
    y_unit: "Ω"
    conditions: "VSY = ±2.5V TO ±27.5V"
  - file: "ada4522-2/curves/cmrr-vs-frequency.csv"
    caption: "Figure 30.CMRR vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f068.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dB"
    conditions: "VSY = ±2.5V TO ±27.5V"
  - file: "ada4522-2/curves/current-noise-density-at-gain-1.csv"
    caption: "Figure 78.Current Noise Density at Gain = 1"
    figure: "ada4522-2/figures/ada4522-2-f051.png"
    page: 35
    x_unit: "Hz"
    y_unit: "pA/√Hz"
    conditions: "RS = 100kΩ, AV = 1"
  - file: "ada4522-2/curves/current-noise-density-vs-frequency.csv"
    caption: "Figure 65.Current Noise Density vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f096.png"
    page: 26
    x_unit: "Hz"
    y_unit: "pA/√Hz"
    conditions: "RS = 100kΩ, AV = 100"
  - file: "ada4522-2/curves/emirr-vs-frequency.csv"
    caption: "Figure 79.EMIRR vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f052.png"
    page: 36
    x_unit: "Hz"
    y_unit: "dB"
    conditions: "V_{IN} = 100mV p-p"
  - file: "ada4522-2/curves/input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-30-v.csv"
    caption: "Figure 15.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V"
    figure: "ada4522-2/figures/ada4522-2-f017.png"
    page: 18
    x_unit: "V"
    y_unit: "pA"
    conditions: "VSY = 30V"
  - file: "ada4522-2/curves/input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-5-v.csv"
    caption: "Figure 13.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V"
    figure: "ada4522-2/figures/ada4522-2-f016.png"
    page: 18
    x_unit: "V"
    y_unit: "pA"
    conditions: "V_{SY} = 5V"
  - file: "ada4522-2/curves/input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-55-v.csv"
    caption: "Figure 17.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V"
    figure: "ada4522-2/figures/ada4522-2-f018.png"
    page: 18
    x_unit: "V"
    y_unit: "pA"
    conditions: "VSY = 55V"
  - file: "ada4522-2/curves/input-bias-current-ib-vs-temperature-vsy-15-v.csv"
    caption: "Figure 20.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f020.png"
    page: 19
    x_unit: "°C"
    y_unit: "pA"
    conditions: "VSY = ±15V, VCM = VSY/2"
  - file: "ada4522-2/curves/input-bias-current-ib-vs-temperature-vsy-2-5-v.csv"
    caption: "Figure 18.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f019.png"
    page: 19
    x_unit: "°C"
    y_unit: "pA"
    conditions: "VSY = ±2.5V, VCM = VSY/2"
  - file: "ada4522-2/curves/input-bias-current-ib-vs-temperature-vsy-27-5-v.csv"
    caption: "Figure 19.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f022.png"
    page: 19
    x_unit: "°C"
    y_unit: "pA"
    conditions: "VSY = ±27.5V, VCM = VSY/2"
  - file: "ada4522-2/curves/input-offset-voltage-distribution-vsy-15-v.csv"
    caption: "Figure 8. Input Offset Voltage Distribution, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f008.png"
    page: 17
    x_unit: "µV"
    y_unit: ""
    conditions: "VSY = ±15V, VCM = VSY/2, 600 CHANNELS, MEAN = 0.31µV, STD DEV. = 0.62µV"
  - file: "ada4522-2/curves/input-offset-voltage-distribution-vsy-2-5-v.csv"
    caption: "Figure 6. Input Offset Voltage Distribution, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f007.png"
    page: 17
    x_unit: "µV"
    y_unit: ""
    conditions: "VSY = ±2.5V, VCM = VSY/2, 600 CHANNELS, MEAN = 0.10µV, STD DEV. = 0.59µV"
  - file: "ada4522-2/curves/input-offset-voltage-distribution-vsy-27-5-v.csv"
    caption: "Figure 10.Input Offset Voltage Distribution, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f009.png"
    page: 17
    x_unit: "µV"
    y_unit: "amplifiers"
    conditions: "VSY = ±27.5V, VCM = VSY/2, 600 CHANNELS, MEAN = 0.69µV, STD DEV. = 0.81µV"
  - file: "ada4522-2/curves/input-offset-voltage-drift-distribution-vsy-15-v.csv"
    caption: "Figure 9. Input Offset Voltage Drift Distribution, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f011.png"
    page: 17
    x_unit: "nV/°C"
    y_unit: "AMPLIFIERS"
    conditions: "VSY = ±15V, −40°C ≤ TA ≤ +125°C, 160 CHANNELS, MEAN = −2.48nV/°C, STD DEV. = 2.65nV/°C"
  - file: "ada4522-2/curves/input-offset-voltage-drift-distribution-vsy-2-5v.csv"
    caption: "Figure 7. Input Offset Voltage Drift Distribution, V_{SY} = ±2.5V"
    figure: "ada4522-2/figures/ada4522-2-f010.png"
    page: 17
    x_unit: "nV/°C"
    y_unit: "AMPLIFIERS"
    conditions: "VSY = ±2.5V, -40°C ≤ TA ≤ +125°C, 160 CHANNELS, MEAN = -1.19nV/°C, STD DEV. = 1.82nV/°C"
  - file: "ada4522-2/curves/input-offset-voltage-drift-distribution-vsy-27-5v.csv"
    caption: "Figure 11.Input Offset Voltage Drift Distribution, V_{SY} = ±27.5V"
    figure: "ada4522-2/figures/ada4522-2-f012.png"
    page: 17
    x_unit: "nV/°C"
    y_unit: "amplifiers"
    conditions: "VSY = ±27.5V, −40°C ≤ TA ≤ +125°C, 160 CHANNELS, MEAN = −4.54nV/°C, STD DEV. = 4.01nV/°C"
  - file: "ada4522-2/curves/input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-30-v.csv"
    caption: "Figure 14.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V"
    figure: "ada4522-2/figures/ada4522-2-f014.png"
    page: 18
    x_unit: "V"
    y_unit: "µV"
    conditions: "VSY = 30V, 20 CHANNELS"
  - file: "ada4522-2/curves/input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-5-v.csv"
    caption: "Figure 12.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V"
    figure: "ada4522-2/figures/ada4522-2-f013.png"
    page: 18
    x_unit: "V"
    y_unit: "µV"
    conditions: "VSY = 5V, 20 CHANNELS"
  - file: "ada4522-2/curves/input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-55-v.csv"
    caption: "Figure 16.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V"
    figure: "ada4522-2/figures/ada4522-2-f015.png"
    page: 18
    x_unit: "V"
    y_unit: "uV"
    conditions: "VSY = 55V, 20 CHANNELS"
  - file: "ada4522-2/curves/open-loop-gain-and-phase-margin-vs-frequency-figure-35-closed-loop-gain-vs-frequ.csv"
    caption: "Figure 34.Open-Loop Gain and Phase Margin vs. Frequency Figure 35.Closed-Loop Gain vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f071.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dB"
    conditions: "VSY = ±2.5V TO ±27.5V, RL = 10kΩ, CL = 50pF, CL = 100pF"
  - file: "ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-load-current-iload.csv"
    caption: "Figure 22.Output Voltage High (V_{OH}) to Supply Rail vs. Load Current (I_{LOAD})"
    figure: "ada4522-2/figures/ada4522-2-f021.png"
    page: 19
    x_unit: "mA"
    y_unit: "mV"
    conditions: "VSY = ±2.5V TO ±27.5V"
  - file: "ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-15-v.csv"
    caption: "Figure 26.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f026.png"
    page: 20
    x_unit: "°C"
    y_unit: "mV"
    conditions: "VSY = ±15V"
  - file: "ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-2-5-v.csv"
    caption: "Figure 24.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f025.png"
    page: 20
    x_unit: "°C"
    y_unit: "mV"
    conditions: "VSY = ±2.5V"
  - file: "ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-27-5-v.csv"
    caption: "Figure 28.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f027.png"
    page: 20
    x_unit: "°C"
    y_unit: "mV"
    conditions: "VSY = ±27.5V"
  - file: "ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-load-current-iload.csv"
    caption: "Figure 23.Output Voltage Low (V_{OL}) to Supply Rail vs. Load Current (I_{LOAD})"
    figure: "ada4522-2/figures/ada4522-2-f024.png"
    page: 19
    x_unit: "mA"
    y_unit: "mV"
    conditions: "VSY = ±2.5V TO ±27.5V"
  - file: "ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-15-v.csv"
    caption: "Figure 27.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f029.png"
    page: 20
    x_unit: "°C"
    y_unit: "mV"
    conditions: "VSY = ±15V"
  - file: "ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-2-5-v.csv"
    caption: "Figure 25.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f028.png"
    page: 20
    x_unit: "°C"
    y_unit: "mV"
    conditions: "VSY = ±2.5V"
  - file: "ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-27-5-v.csv"
    caption: "Figure 29.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f030.png"
    page: 20
    x_unit: "°C"
    y_unit: "mV"
    conditions: "V_{SY} = ±27.5V"
  - file: "ada4522-2/curves/output-voltage-swing-vs-frequency.csv"
    caption: "Figure 70.Output Voltage Swing vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f043.png"
    page: 27
    x_unit: "Hz"
    y_unit: "V p-p"
    conditions: "RL = 10kΩ, AV = -1; VIN = ±26V, VSY = ±27.5V; VIN = ±13.5V, VSY = ±15V; VIN = ±1V, VSY = ±2.5V"
  - file: "ada4522-2/curves/psrr-vs-frequency.csv"
    caption: "Figure 31.PSRR vs. Frequency"
    figure: "ada4522-2/figures/ada4522-2-f067.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dB"
    conditions: "VSY = ±2.5V TO ±27.5V"
  - file: "ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-vsy-15-v.csv"
    caption: "Figure 44.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f034.png"
    page: 23
    x_unit: "pF"
    y_unit: "%"
    conditions: "VSY = ±15V, RL = 10kΩ, AV = 1, VIN = 100mV p-p"
  - file: "ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-vsy-2-5-v.csv"
    caption: "Figure 42.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f033.png"
    page: 23
    x_unit: "pF"
    y_unit: "%"
    conditions: "VSY = ±2.5V, RL = 10kΩ, AV = 1, VIN = 100mV p-p"
  - file: "ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-vsy-27-5-v.csv"
    caption: "Figure 46.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f035.png"
    page: 23
    x_unit: "pF"
    y_unit: "%"
    conditions: "VSY = ±27.5V, RL = 10kΩ, AV = 1, VIN = 100mV p-p"
  - file: "ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-with-various-output-isolating-resisto.csv"
    caption: "Figure 81.Small Signal Overshoot vs. Load Capacitance with Various Output Isolating Resistors"
    figure: "ada4522-2/figures/ada4522-2-f054.png"
    page: 36
    x_unit: "pF"
    y_unit: "%"
    conditions: "VSY = ±15V, RL = 10kOhm, AV = 1, VIN = 100mV p-p"
  - file: "ada4522-2/curves/supply-current-isy-per-amplifier-vs-supply-voltage-vsy.csv"
    caption: "Figure 21.Supply Current (I_{SY}) per Amplifier vs. Supply Voltage (V_{SY})"
    figure: "ada4522-2/figures/ada4522-2-f023.png"
    page: 19
    x_unit: "V"
    y_unit: "mA"
  - file: "ada4522-2/curves/supply-current-isy-per-amplifier-vs-temperature-vsy-5v-30v-55v.csv"
    caption: "Figure 33.Supply Current (I_{SY}) per Amplifier vs. Temperature, V_{SY} = 5V, 30V, 55V"
    figure: "ada4522-2/figures/ada4522-2-f070.png"
    page: 21
    x_unit: "°C"
    y_unit: "mA"
    conditions: "VSY = 5V, 30V, 55V"
  - file: "ada4522-2/curves/supply-current-isy-per-dual-amplifier-vs-supply-voltage-vsy-ada4522-1-ada4522-2-.csv"
    caption: "Figure 88.Supply Current (I_{SY}) per Dual Amplifier vs. Supply Voltage (V_{SY}) (ADA4522-1/ADA4522-2/ADA4522-4 as a Comparator)"
    figure: "ada4522-2/figures/ada4522-2-f061.png"
    page: 42
    x_unit: "V"
    y_unit: "mA"
  - file: "ada4522-2/curves/thd-n-vs-amplitude-vsy-15-v.csv"
    caption: "Figure 50.THD + N vs. Amplitude, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f081.png"
    page: 24
    x_unit: "V rms"
    y_unit: "%"
    conditions: "VSY = ±15V, AV = 1, FREQUENCY = 1kHz, RL = 10kΩ"
  - file: "ada4522-2/curves/thd-n-vs-amplitude-vsy-2-5-v.csv"
    caption: "Figure 48.THD + N vs. Amplitude, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f080.png"
    page: 24
    x_unit: "V rms"
    y_unit: "%"
    conditions: "VSY = ±2.5V, AV = 1, FREQUENCY = 1kHz, RL = 10kΩ"
  - file: "ada4522-2/curves/thd-n-vs-amplitude-vsy-27-5-v.csv"
    caption: "Figure 52.THD + N vs. Amplitude, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f083.png"
    page: 24
    x_unit: "V rms"
    y_unit: "%"
    conditions: "VSY = ±27.5V, AV = 1, FREQUENCY = 1kHz, RL = 10kΩ"
  - file: "ada4522-2/curves/thd-n-vs-frequency-vsy-15-v.csv"
    caption: "Figure 51.THD + N vs. Frequency, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f082.png"
    page: 24
    x_unit: "Hz"
    y_unit: "%"
    conditions: "VSY = ±15V, AV = 1, RL = 10kΩ, VIN = 6V rms"
  - file: "ada4522-2/curves/thd-n-vs-frequency-vsy-2-5-v.csv"
    caption: "Figure 49.THD + N vs. Frequency, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f079.png"
    page: 24
    x_unit: "Hz"
    y_unit: "%"
    conditions: "VSY = ±2.5V, AV = 1, RL = 10kΩ, VIN = 0.6V rms"
  - file: "ada4522-2/curves/thd-n-vs-frequency-vsy-27-5-v.csv"
    caption: "Figure 53.THD + N vs. Frequency, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f084.png"
    page: 24
    x_unit: "Hz"
    y_unit: "%"
    conditions: "VSY = ±27.5V, AV = 1, RL = 10kΩ, VIN = 10V rms"
  - file: "ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-15-v.csv"
    caption: "Figure 62.Voltage Noise Density vs. Frequency, V_{SY} = ±15 V"
    figure: "ada4522-2/figures/ada4522-2-f093.png"
    page: 26
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "VSY = ±15V, AV = 1"
  - file: "ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-2-5-v.csv"
    caption: "Figure 60.Voltage Noise Density vs. Frequency, V_{SY} = ±2.5 V"
    figure: "ada4522-2/figures/ada4522-2-f092.png"
    page: 26
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "VSY = ±2.5V, AV = 1"
  - file: "ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-27-5-v.csv"
    caption: "Figure 64.Voltage Noise Density vs. Frequency, V_{SY} = ±27.5 V"
    figure: "ada4522-2/figures/ada4522-2-f095.png"
    page: 26
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "VSY = ±27.5V, AV = 1"
  - file: "ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-5-v-30-v-55-v.csv"
    caption: "Figure 1. Voltage Noise Density vs. Frequency, V_{SY} = 5 V, 30 V, 55 V"
    figure: "ada4522-2/figures/ada4522-2-f001.png"
    page: 1
  - file: "ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-5v-30v.csv"
    caption: "Figure 61.Voltage Noise Density vs. Frequency, V_{SY} = 5V, 30V,"
    figure: "ada4522-2/figures/ada4522-2-f091.png"
    page: 26
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "AV = 100; VSY = 5V, 30V, 55V"
  - file: "ada4522-2/curves/voltage-noise-density-with-post-filters.csv"
    caption: "Figure 77.Voltage Noise Density with Post Filters"
    figure: "ada4522-2/figures/ada4522-2-f050.png"
    page: 34
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "AV = 1; AV = 1 (POST FILTER AT 80kHz); AV = 1 (POST FILTER AT 8kHz)"
  - file: "ada4522-2/curves/voltage-noise-density-with-various-gains.csv"
    caption: "Figure 76.Voltage Noise Density with Various Gains"
    figure: "ada4522-2/figures/ada4522-2-f049.png"
    page: 34
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "VSY = ±15V"
agentforge:
  part_number: "ADA4522-2"
  datasheet_revision: "I"
  repairs: 4
  reading_order: "structure-tree"
---

### ADA4522-1/ADA4522-2/ADA4522-4

# ADA4522-2 — 55 V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers

*Datasheet: [ADA4522-2 data sheet (PDF)](https://www.analog.com/media/en/technical-documentation/data-sheets/ada4522-2.pdf)*

### FEATURES

- Low offset voltage: 5 µV maximum
- Extremely low offset voltage drift: 22 nV/°C maximum
- Low voltage noise density: 5.8 nV/√Hz typical
  - 117 nV p-p typical from 0.1 Hz to 10 Hz
- Low input bias current: 50 pA typical
- Unity-gain crossover: 3 MHz typical
- Single-supply operation: input voltage range includes ground and rail-to-rail output
- Wide range of operating voltages
  - Single-supply operation: 4.5 V to 55 V
  - Dual-supply operation: ±2.25 V to ±27.5 V
- Integrated EMI filters
- Unity-gain stable
- AEC-Q100 qualified for automotive applications

### APPLICATIONS

- Inductance, capacitance, and resistance (LCR) meter/ megohmmeter front-end amplifiers
- Load cell and bridge transducers
- Magnetic force balance scales
- High precision shunt current sensing
- Thermocouple/resistance temperature detector (RTD) sensors
- Programmable  logic controller (PLC) input  and output amplifiers
- Automotive sensors
- On-board chargers (OBC) and DC-DC converters
- Battery management systems (BMS)
- Traction inverter

### GENERAL DESCRIPTION

The ADA4522-1/ADA4522-2/ADA4522-4 are single/dual/quad channel, zero drift op amps with low noise and power, ground sensing inputs, and rail-to-rail output, optimized for total accuracy over time, temperature, and voltage conditions. The wide operating voltage and temperature ranges, as well as the high open-loop gain and very low DC and AC errors make the devices well suited for amplifying very small input  signals and for accurately reproducing larger signals in a wide variety of applications.

The ADA4522-1/ADA4522-2/ADA4522-4 performance is specified at 5.0 V, 30 V, and 55 V power supply voltages. These devices operate over the range of 4.5 V to 55 V, and are excellent for applications using single-ended supplies of 5 V, 10 V, 12 V, and 30 V, or for applications using higher single supplies and dual supplies of ±2.5 V, ±5 V, and ±15 V. The ADA4522-1/ADA4522-2/ADA4522-4 use on-chip filtering to achieve high immunity to electromagnetic interference (EMI).

The ADA4522-1/ADA4522-2/ADA4522-4 are fully specified over the extended industrial temperature range of -40°C to +125°C and are available in 8-lead MSOP, 8-lead SOIC, 14-lead SOIC, and 14-lead TSSOP packages.

![Figure 1.Voltage Noise Density vs. Frequency, V_{SY} = 5 V, 30 V, 55 V](ada4522-2/figures/ada4522-2-f001.png)

*Figure 1.Voltage Noise Density vs. Frequency, V_{SY} = 5 V, 30 V, 55 V*

Digitized data: [voltage-noise-density-vs-frequency-vsy-5-v-30-v-55-v.csv](ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-5-v-30-v-55-v.csv) — values read off the printed plot by the digitizer, not published data.

### PIN CONNECTION DIAGRAM

![Figure 2.8-Lead MSOP (RM Suffix) and 8-Lead SOIC (R Suffix) Pin Configuration](ada4522-2/figures/ada4522-2-f002.png)

*Figure 2.8-Lead MSOP (RM Suffix) and 8-Lead SOIC (R Suffix) Pin Configuration*

For the ADA4522-1 and ADA4522-4 pin connections and for more information about the pin connections for these products, see the Pin Configurations and Function Descriptions section.

**Table 1. Related Products – Zero Drift Op Amps (<0.1µV/°C)** ([table-00-p2-data.csv](ada4522-2/tables/table-00-p2-data.csv), p. 2)

| SUPPLY VOLTAGE | 5 V | 16 V | 30 V | 55 V |
|---|---|---|---|---|
| Single | ADA4528-1 AD8628 AD8538 ADA4051-1 | AD8638 MAX44250 | ADA4638-1 MAX44244 MAX44241 | ADA4522-1 |
| Dual | ADA4528-2 AD8629 AD8539 ADA4051-2 | AD8639 MAX44251 | MAX44248 MAX44246 | ADA4522-2 |
| Quad | AD8630 | MAX44252 | MAX44245 MAX44243 | ADA4522-4 |

### TABLE OF CONTENTS

- Applications...1
- General Description...1
- Pin Connection Diagram...2
- Specifications...5
- Absolute Maximum Ratings...14
  - Thermal Resistance...14
  - Power Sequencing...14
  - ESD Caution...14
- Pin Configurations and Function Descriptions...15
- Typical Performance Characteristics...17
- Theory of Operation...28
  - On-Chip Input EMI Filter and Clamp Circuit...29
  - Thermal Shutdown...29
  - Input Protection...30
  - Single-Supply and Rail-to-Rail Output...30
  - Large Signal Transient Response...31
    - Case 1...31
    - Case 2...32
  - Noise Considerations...32
    - 1/f Noise...32
    - Source Resistance...33
    - Residual Ripple...33
    - Current Noise Density...35
  - EMI Rejection Ratio...35
  - Capacitive Load Stability...36
- Applications Information...37
  - Single-Supply Instrumentation Amplifier...37
  - Load Cell/Strain Gauge Sensor Signal Conditioning Using the ADA4522-2...38
  - Precision Low-Side Current Shunt Sensor...39
  - Printed Circuit Board Layout...40
  - Comparator Operation...40
  - Use of Large Source Resistance...42
  - Unity Gain Follower with Large Source Resistance...42
  - Workaround...42
- Outline Dimensions...44
- Ordering Guide...46
- Automotive Products...46
- Revision History...47

### SPECIFICATIONS

### Table 2. Electrical Characteristics

(V_{SY} = 5.0 V, V_{CM} = V_{SY} /2 V, T_{A} = 25°C, unless otherwise specified.)

**Table 2. Electrical Characteristics** ([table-01-p5-spec.csv](ada4522-2/tables/table-01-p5-spec.csv), p. 5)

| PARAMETER | SYMBOL | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|---|
| **INPUT CHARACTERISTICS** |  |  |  |  |  |  |
| Offset Voltage | V_{OS} | V_{CM} = V_{SY}/2 |  | 0.7 | 5 | µV |
| Offset Voltage | V_{OS} | −40°C ≤ T_{A} ≤ +125°C |  |  | 6.5 | µV |
| Offset Voltage Drift | TCV_{OS} |  |  | 2.5 | 15 | nV/°C |
| Input Bias Current | I_{B} |  |  | 50 | 150 | pA |
| Input Bias Current | I_{B} | −40°C ≤ T_{A} ≤ +85°C |  |  | 500 | pA |
| Input Bias Current | I_{B} | −40°C ≤ T_{A} ≤ +125°C |  |  | 2 | nA |
| Input Offset Current | I_{OS} |  |  | 80 | 250 | pA |
| Input Offset Current | I_{OS} | −40°C ≤ T_{A} ≤ +85°C |  |  | 350 | pA |
| Input Offset Current | I_{OS} | −40°C ≤ T_{A} ≤ +125°C |  |  | 500 | pA |
| Input Voltage Range | IVR |  | 0 |  | 3.5 | V |
| Common-Mode Rejection Ratio | CMRR | ADA4522-1, ADA4522-2, V_{CM} = 0 V to 3.5 V | 135 | 155 |  | dB |
| Common-Mode Rejection Ratio | CMRR | ADA4522-4, V_{CM} = 0 V to 3.5 V | 130 | 145 |  | dB |
| Common-Mode Rejection Ratio | CMRR | −40°C ≤ T_{A} ≤ +125°C | 130 |  |  | dB |
| Large Signal Voltage Gain (dB) | A_{V} (dB) | R_{L} = 10 kΩ, V_{OUT} = 0.5 V to 4.5 V | 125 | 145 |  | dB |
| Large Signal Voltage Gain (dB) | A_{V} (dB) | −40°C ≤ T_{A} ≤ +125°C | 125 |  |  | dB |
| Input Resistance Differential Mode | R_{INDM} |  |  | 30 |  | kΩ |
| Input Resistance Common Mode | R_{INCM} |  |  | 100 |  | GΩ |
| Input Capacitance Differential Mode | C_{INDM} |  |  | 7 |  | pF |
| Input Capacitance Common Mode | C_{INCM} |  |  | 35 |  | pF |
| **OUTPUT CHARACTERISTICS** |  |  |  |  |  |  |
| Output Voltage High | V_{OH} | R_{L} = 10 kΩ to V_{SY}/2 | 4.97 | 4.98 |  | V |
| Output Voltage High | V_{OH} | −40°C ≤ T_{A} ≤ +125°C | 4.95 |  |  | V |
| Output Voltage Low | V_{OL} | R_{L} = 10 kΩ to V_{SY}/2 |  | 20 | 30 | mV |
| Output Voltage Low | V_{OL} | −40°C ≤ T_{A} ≤ +125°C |  |  | 50 | mV |
| Continuous Output Current | I_{OUT} | Dropout voltage = 1 V |  | 14 |  | mA |
| Short-Circuit Current Source | I_{SC+} |  |  | 22 |  | mA |
| Short-Circuit Current Source | I_{SC+} | T_{A} = 125°C |  | 15 |  | mA |
| Short-Circuit Current Sink | I_{SC−} |  |  | 29 |  | mA |
| Short-Circuit Current Sink | I_{SC−} | T_{A} = 125°C |  | 19 |  | mA |
| Closed-Loop Output Impedance | Z_{OUT} | f = 1 MHz, A_{V} = 1 |  | 4 |  | Ω |
| **POWER SUPPLY** |  |  |  |  |  |  |
| Power Supply Rejection Ratio | PSRR | V_{SY} = 4.5 V to 55 V | 150 | 160 |  | dB |
| Power Supply Rejection Ratio | PSRR | −40°C ≤ T_{A} ≤ +125°C | 145 |  |  | dB |
| Supply Current per Amplifier | I_{SY} | ADA4522-2, ADA4522-4, I_{OUT} = 0 mA |  | 830 | 900 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-2, ADA4522-4, −40°C ≤ T_{A} ≤ +125°C |  |  | 950 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-1, I_{OUT} = 0 mA |  | 840 | 910 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-1, −40°C ≤ T_{A} ≤ +125°C |  |  | 970 | µA |
| **DYNAMIC PERFORMANCE** |  |  |  |  |  |  |
| Slew Rate | SR+ | R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 1.4 |  | V/µs |
| Slew Rate | SR− | R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 1.3 |  | V/µs |
| Gain Bandwidth Product | GBP | V_{IN} = 10 mV p-p, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 100 |  | 2.7 |  | MHz |
| Unity-Gain Crossover | UGC | V_{IN} = 10 mV p-p, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 3 |  | MHz |
| −3 dB Closed-Loop Bandwidth | f_{−3 dB} | V_{IN} = 10 mV p-p, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 6.5 |  | MHz |
| Phase Margin | Φ_{M} | V_{IN} = 10 mV p-p, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 64 |  | Degrees |
| Settling Time to 0.1% | t_{S} | V_{IN} = 1 V step, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 4 |  | µs |
| Channel Separation | C_{S} | V_{IN} = 1 V p-p, f = 10 kHz, R_{L} = 10 kΩ, C_{L} = 50 pF |  | 98 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 400 MHz |  | 72 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 900 MHz |  | 80 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 1800 MHz |  | 83 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 2400 MHz |  | 85 |  | dB |
| **NOISE PERFORMANCE** |  |  |  |  |  |  |
| Total Harmonic Distortion Plus Noise Bandwidth (BW) = 80 kHz | THD + N | A_{V} = 1, f = 1 kHz, V_{IN} = 0.6 V rms |  | 0.001 |  | % |
| Total Harmonic Distortion Plus Noise BW = 500 kHz | THD + N | A_{V} = 1, f = 1 kHz, V_{IN} = 0.6 V rms |  | 0.02 |  | % |
| Peak-to-Peak Voltage Noise | e_{N p-p} | A_{V} = 100, f = 0.1 Hz to 10 Hz |  | 117 |  | nV p-p |
| Voltage Noise Density | e_{N} | A_{V} = 100, f = 1 kHz |  | 5.8 |  | nV/√Hz |
| Peak-to-Peak Current Noise | I_{N p-p} | A_{V} = 100, f = 0.1 Hz to 10 Hz |  | 16 |  | pA p-p |
| Current Noise Density | I_{N} | A_{V} = 100, f = 1 kHz |  | 0.8 |  | pA/√Hz |

- **Note 1:** EMIRR = 20log(V_{IN_PEAK}/ΔV_{OS})

### Table 3. Electrical Characteristics

(V_{SY} = 5.0 V, V_{CM} = V_{SY} /2 V, T_{A} = 25°C, unless otherwise specified.)

**Table 3. Electrical Characteristics** ([table-02-p8-spec.csv](ada4522-2/tables/table-02-p8-spec.csv), p. 8)

| PARAMETER | SYMBOL | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|---|
| **INPUT CHARACTERISTICS** |  |  |  |  |  |  |
| Offset Voltage | V_{OS} | V_{CM} = V_{SY}/2 |  | 1 | 5 | µV |
| Offset Voltage | V_{OS} | −40°C ≤ T_{A} ≤ +125°C |  |  | 7.2 | µV |
| Offset Voltage Drift | TCV_{OS} | ADA4522-1, ADA4522-2 |  | 4 | 22 | nV/°C |
| Offset Voltage Drift | TCV_{OS} | ADA4522-4 |  | 5.3 | 25 | nV/°C |
| Input Bias Current | I_{B} |  |  | 50 | 150 | pA |
| Input Bias Current | I_{B} | −40°C ≤ T_{A} ≤ +85°C |  |  | 500 | pA |
| Input Bias Current | I_{B} | −40°C ≤ T_{A} ≤ +125°C |  |  | 3 | nA |
| Input Offset Current | I_{OS} |  |  | 80 | 300 | pA |
| Input Offset Current | I_{OS} | −40°C ≤ T_{A} ≤ +85°C |  |  | 400 | pA |
| Input Offset Current | I_{OS} | −40°C ≤ T_{A} ≤ +125°C |  |  | 500 | pA |
| Input Voltage Range | IVR |  | 0 |  | 28.5 | V |
| Common-Mode Rejection Ratio | CMRR | V_{CM} = 0 V to 28.5 V | 145 | 160 |  | dB |
| Common-Mode Rejection Ratio | CMRR | −40°C ≤ T_{A} ≤ +125°C | 140 |  |  | dB |
| Large Signal Voltage Gain (dB) | A_{V} (dB) | R_{L} = 10 kΩ, V_{OUT} = 0.5 V to 29.5 V | 140 | 150 |  | dB |
| Large Signal Voltage Gain (dB) | A_{V} (dB) | −40°C ≤ T_{A} ≤ +125°C | 135 |  |  | dB |
| Input Resistance Differential Mode | R_{INDM} |  |  | 30 |  | kΩ |
| Input Resistance Common Mode | R_{INCM} |  |  | 400 |  | GΩ |
| Input Capacitance Differential Mode | C_{INDM} |  |  | 7 |  | pF |
| Input Capacitance Common Mode | C_{INCM} |  |  | 35 |  | pF |
| **OUTPUT CHARACTERISTICS** |  |  |  |  |  |  |
| Output Voltage High | V_{OH} | R_{L} = 10 kΩ to V_{SY}/2 | 29.87 | 29.89 |  | V |
| Output Voltage High | V_{OH} | −40°C ≤ T_{A} ≤ +125°C | 29.80 |  |  | V |
| Output Voltage Low | V_{OL} | R_{L} = 10 kΩ to V_{SY}/2 |  | 110 | 130 | mV |
| Output Voltage Low | V_{OL} | −40°C ≤ T_{A} ≤ +125°C |  |  | 200 | mV |
| Continuous Output Current | I_{OUT} | Dropout voltage = 1 V |  | 14 |  | mA |
| Short-Circuit Current Source | I_{SC+} |  |  | 21 |  | mA |
| Short-Circuit Current Source | I_{SC+} | T_{A} = 125°C |  | 15 |  | mA |
| Short-Circuit Current Sink | I_{SC−} |  |  | 33 |  | mA |
| Short-Circuit Current Sink | I_{SC−} | T_{A} = 125°C |  | 22 |  | mA |
| Closed-Loop Output Impedance | Z_{OUT} | f = 1 MHz, A_{V} = 1 |  | 4 |  | Ω |
| **POWER SUPPLY** |  |  |  |  |  |  |
| Power Supply Rejection Ratio | PSRR | V_{SY} = 4.5 V to 55 V | 150 | 160 |  | dB |
| Power Supply Rejection Ratio | PSRR | −40°C ≤ T_{A} ≤ +125°C | 145 |  |  | dB |
| Supply Current per Amplifier | I_{SY} | ADA4522-2, ADA4522-4, I_{OUT} = 0 mA |  | 830 | 900 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-2, ADA4522-4, −40°C ≤ T_{A} ≤ +125°C |  |  | 950 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-1, I_{OUT} = 0 mA |  | 840 | 910 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-1, −40°C ≤ T_{A} ≤ +125°C |  |  | 970 | µA |
| **DYNAMIC PERFORMANCE** |  |  |  |  |  |  |
| Slew Rate | SR+ | R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 1.8 |  | V/µs |
| Slew Rate | SR− | R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 0.9 |  | V/µs |
| Gain Bandwidth Product | GBP | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 100 |  | 2.7 |  | MHz |
| Unity-Gain Crossover | UGC | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 3 |  | MHz |
| −3 dB Closed-Loop Bandwidth | f_{−3 dB} | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 6.5 |  | MHz |
| Phase Margin | Φ_{M} | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 64 |  | Degrees |
| Settling Time to 0.1% | t_{S} | V_{IN} = 10 V step, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 12 |  | µs |
| Settling Time to 0.01% | t_{S} | V_{IN} = 10 V step, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 14 |  | µs |
| Channel Separation | CS | V_{IN} = 10 V p-p, f = 10 kHz, R_{L} = 10 kΩ, C_{L} = 50 pF |  | 98 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 400 MHz |  | 72 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 900 MHz |  | 80 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 1800 MHz |  | 83 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 2400 MHz |  | 85 |  | dB |
| **NOISE PERFORMANCE** |  |  |  |  |  |  |
| Total Harmonic Distortion Plus Noise BW = 80 kHz | THD + N | A_{V} = 1, f = 1 kHz, V_{IN} = 6 V rms |  | 0.0005 |  | % |
| Total Harmonic Distortion Plus Noise BW = 500 kHz | THD + N | A_{V} = 1, f = 1 kHz, V_{IN} = 6 V rms |  | 0.004 |  | % |
| Peak-to-Peak Voltage Noise | e_{N p-p} | A_{V} = 100, f = 0.1 Hz to 10 Hz |  | 117 |  | nV p-p |
| Voltage Noise Density | e_{N} | A_{V} = 100, f = 1 kHz |  | 5.8 |  | nV/√Hz |
| Peak-to-Peak Current Noise | I_{N p-p} | A_{V} = 100, f = 0.1 Hz to 10 Hz |  | 16 |  | pA p-p |
| Current Noise Density | I_{N} | A_{V} = 100, f = 1 kHz |  | 0.8 |  | pA/√Hz |

- **Note 1:** EMIRR = 20log(V_{IN_PEAK}/ΔV_{OS})

### Table 4. Electrical Characteristics

(V_{SY} = 55 V, V_{CM} = V_{SY} /2 V, T_{A} = 25°C, unless otherwise specified.)

**Table 4. Electrical Characteristics** ([table-03-p11-spec.csv](ada4522-2/tables/table-03-p11-spec.csv), p. 11)

| PARAMETER | SYMBOL | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|---|
| **INPUT CHARACTERISTICS** |  |  |  |  |  |  |
| Offset Voltage | V_{OS} | V_{CM} = V_{SY}/2 |  | 1.5 | 7 | µV |
| Offset Voltage | V_{OS} | −40°C ≤ T_{A} ≤ +125°C |  |  | 10 | µV |
| Offset Voltage Drift | TCV_{OS} | ADA4522-1, ADA4522-2 |  | 6 | 30 | nV/°C |
| Offset Voltage Drift | TCV_{OS} | ADA4522-4 |  | 9 | 40 | nV/°C |
| Input Bias Current | I_{B} |  |  | 50 | 150 | pA |
| Input Bias Current | I_{B} | −40°C ≤ T_{A} ≤ +85°C |  |  | 500 | pA |
| Input Bias Current | I_{B} | −40°C ≤ T_{A} ≤ +125°C |  |  | 4.5 | nA |
| Input Offset Current | I_{OS} |  |  | 80 | 300 | pA |
| Input Offset Current | I_{OS} | −40°C ≤ T_{A} ≤ +85°C |  |  | 400 | pA |
| Input Offset Current | I_{OS} | ADA4522-1, ADA4522-2, −40°C ≤ T_{A} ≤ +125°C |  |  | 500 | pA |
| Input Offset Current | I_{OS} | ADA4522-4, −40°C ≤ T_{A} ≤ +125°C |  |  | 550 | pA |
| Input Voltage Range | IVR |  | 0 |  | 53.5 | V |
| Common-Mode Rejection Ratio | CMRR | V_{CM} = 0 V to 53.5 V | 140 | 144 |  | dB |
| Common-Mode Rejection Ratio | CMRR | −40°C ≤ T_{A} ≤ +125°C | 135 |  |  | dB |
| Large Signal Voltage Gain (dB) | A_{V} (dB) | R_{L} = 10 kΩ, V_{OUT} = 0.5 V to 54.5 V | 135 | 137 |  | dB |
| Large Signal Voltage Gain (dB) | A_{V} (dB) | −40°C ≤ T_{A} ≤ +125°C | 125 |  |  | dB |
| Input Resistance Differential Mode | R_{INDM} |  |  | 30 |  | kΩ |
| Input Resistance Common Mode | R_{INCM} |  |  | 1000 |  | GΩ |
| Input Capacitance Differential Mode | C_{INDM} |  |  | 7 |  | pF |
| Input Capacitance Common Mode | C_{INCM} |  |  | 35 |  | pF |
| **OUTPUT CHARACTERISTICS** |  |  |  |  |  |  |
| Output Voltage High | V_{OH} | R_{L} = 10 kΩ to V_{SY} /2 | 54.75 | 54.8 |  | V |
| Output Voltage High | V_{OH} | −40°C ≤ T_{A} ≤ +125°C | 54.65 |  |  | V |
| Output Voltage Low | V_{OL} | R_{L} = 10 kΩ to V_{SY}/2 |  | 200 | 250 | mV |
| Output Voltage Low | V_{OL} | −40°C ≤ T_{A} ≤ +125°C |  |  | 350 | mV |
| Continuous Output Current | I_{OUT} | Dropout voltage = 1 V |  | 14 |  | mA |
| Short-Circuit Current Source | I_{SC+} |  |  | 21 |  | mA |
| Short-Circuit Current Source | I_{SC+} | T_{A} = 125°C |  | 15 |  | mA |
| Short-Circuit Current Sink | I_{SC−} |  |  | 32 |  | mA |
| Short-Circuit Current Sink | I_{SC−} | T_{A} = 125°C |  | 22 |  | mA |
| Closed-Loop Output Impedance | Z_{OUT} | f = 1 MHz, A_{V} = 1 |  | 4 |  | Ω |
| **POWER SUPPLY** |  |  |  |  |  |  |
| Power Supply Rejection Ratio | PSRR | V_{SY} = 4.5 V to 55 V | 150 | 160 |  | dB |
| Power Supply Rejection Ratio | PSRR | −40°C ≤ T_{A} ≤ +125°C | 145 |  |  | dB |
| Supply Current per Amplifier | I_{SY} | ADA4522-2, ADA4522-4, I_{OUT} = 0 mA |  | 830 | 900 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-2, ADA4522-4, −40°C ≤ T_{A} ≤ +125°C |  |  | 950 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-1, I_{OUT} = 0 mA |  | 840 | 910 | µA |
| Supply Current per Amplifier | I_{SY} | ADA4522-1, −40°C ≤ T_{A} ≤ +125°C |  |  | 970 | µA |
| **DYNAMIC PERFORMANCE** |  |  |  |  |  |  |
| Slew Rate | SR+ | R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 1.7 |  | V/µs |
| Slew Rate | SR− | R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 0.8 |  | V/µs |
| Gain Bandwidth Product | GBP | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 100 |  | 2.7 |  | MHz |
| Unity-Gain Crossover | UGC | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 3 |  | MHz |
| −3 dB Closed-Loop Bandwidth | f_{−3 dB} | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 6.5 |  | MHz |
| Phase Margin | Φ_{M} | V_{IN} = 10 mV_{p-p}, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 64 |  | Degrees |
| Settling Time to 0.1% | t_{S} | V_{IN} = 10 V step, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 12 |  | µs |
| Settling Time to 0.01% | t_{S} | V_{IN} = 10 V step, R_{L} = 10 kΩ, C_{L} = 50 pF, A_{V} = 1 |  | 14 |  | µs |
| Channel Separation | CS | V_{IN} = 10 V {p-p}, f = 10 kHz, R_{L} = 10 kΩ, C_{L} = 50 pF |  | 98 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 400 MHz |  | 72 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 900 MHz |  | 80 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 1800 MHz |  | 83 |  | dB |
| EMI Rejection Ratio of +IN/+IN x[^1] | EMIRR | V_{IN} = 100 mV peak, f = 2400 MHz |  | 85 |  | dB |
| **NOISE PERFORMANCE** |  |  |  |  |  |  |
| Total Harmonic Distortion Plus Noise BW = 80 kHz | THD + N | A_{V} = 1, f = 1 kHz, V_{IN} = 10 V rms |  | 0.0007 |  | % |
| Total Harmonic Distortion Plus Noise BW = 500 kHz | THD + N | A_{V} = 1, f = 1 kHz, V_{IN} = 10 V rms |  | 0.003 |  | % |
| Peak-to-Peak Voltage Noise | e_{N p-p} | A_{V} = 100, f = 0.1 Hz to 10 Hz |  | 117 |  | nV p-p |
| Voltage Noise Density | e_{N} | A_{V} = 100, f = 1 kHz |  | 5.8 |  | nV/√Hz |
| Peak-to-Peak Current Noise | I_{N p-p} | A_{V} = 100, f = 0.1 Hz to 10 Hz |  | 16 |  | pA p-p |
| Current Noise Density | I_{N} | A_{V} = 100, f = 1 kHz |  | 0.8 |  | pA/√Hz |

- **Note 1:** EMIRR = 20log(V_{IN_PEAK}/ΔV_{OS})

### ABSOLUTE MAXIMUM RATINGS

T_{A} = 25°C unless otherwise specified.

**Table 5. Absolute Maximum Ratings** ([table-04-p14-abs_max.csv](ada4522-2/tables/table-04-p14-abs_max.csv), p. 14)

| PARAMETER | RATING |
|---|---|
| Supply Voltage | 60 V |
| Input Voltage | (V-) - 300 mV to (V+) + 300 mV |
| Input Current[^1] | ±10 mA |
| Differential Input Voltage | ±5 V |
| Output Short-Circuit Duration to Ground | Indefinite |
| **Temperature Range** |  |
| Storage | -65°C to +150°C |
| Operating | -40°C to +125°C |
| Junction | -65°C to +150°C |
| Lead Temperature (Soldering, 60 sec) | 300°C |

- **Note 1:** The input pins have clamp diodes to the power supply pins. Limit the input current to ±10 mA or less whenever input signals exceed the power supply rail by 300 mV.

Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability.

### Thermal Resistance

θ_{JA} is specified for the worst case conditions, that is, a device soldered in a circuit board for surface-mount packages using a standard 4-layer JEDEC board.

**Table 6. Thermal Resistance** ([table-05-p14-data.csv](ada4522-2/tables/table-05-p14-data.csv), p. 14)

| PACKAGE TYPE | θ_{JA} | θ_{JC} | UNIT |
|---|---|---|---|
| RM-8 | 194 | 38 | °C/W |
| R-8 | 122 | 41 | °C/W |
| RU-14 | 112 | 43 | °C/W |
| R-14 | 115 | 36 | °C/W |

### Power Sequencing

Apply the op amp supplies simultaneously; if not possible, apply the positive supply before the negative supply.

### ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

### PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS

![Figure 3. ADA4522-1 Pin Configuration](ada4522-2/figures/ada4522-2-f004.png)

*Figure 3. ADA4522-1 Pin Configuration*


**Table 7. ADA4522-1 Pin Function Descriptions** ([table-06-p15-pin.csv](ada4522-2/tables/table-06-p15-pin.csv), p. 15)

| PIN | NAME | DESCRIPTION |
|---|---|---|
| 1, 5, 8 | NIC | Not Internally Connected |
| 2 | −IN | Inverting Input |
| 3 | +IN | Noninverting Input |
| 4 | V- | Negative Supply Voltage |
| 6 | OUT | Output |
| 7 | V+ | Positive Supply Voltage |

![Figure 4. ADA4522-2 Pin Configuration](ada4522-2/figures/ada4522-2-f005.png)

*Figure 4. ADA4522-2 Pin Configuration*

**Table 8. ADA4522-2 Pin Function Descriptions** ([table-07-p15-pin.csv](ada4522-2/tables/table-07-p15-pin.csv), p. 15)

| PIN | NAME | DESCRIPTION |
|---|---|---|
| 1 | OUT A | Output, Channel A |
| 2 | −IN A | Inverting Input, Channel A |
| 3 | +IN A | Noninverting Input, Channel A |
| 4 | V− | Negative Supply Voltage |
| 5 | +IN B | Noninverting Input, Channel B |
| 6 | −IN B | Inverting Input, Channel B |
| 7 | OUT B | Output, Channel B |
| 8 | V+ | Positive Supply Voltage |

![Figure 5. ADA4522-4 Pin Configuration](ada4522-2/figures/ada4522-2-f006.png)

*Figure 5. ADA4522-4 Pin Configuration*

**Table 9. ADA4522-4 Pin Function Descriptions** ([table-08-p16-pin.csv](ada4522-2/tables/table-08-p16-pin.csv), p. 16)

| PIN | NAME | DESCRIPTION |
|---|---|---|
| 1 | OUT A | Output, Channel A |
| 2 | −IN A | Inverting Input, Channel A |
| 3 | +IN A | Noninverting Input, Channel A |
| 4 | V+ | Positive Supply Voltage |
| 5 | +IN B | Noninverting Input, Channel B |
| 6 | −IN B | Inverting Input, Channel B |
| 7 | OUT B | Output, Channel B |
| 8 | OUT C | Output, Channel C |
| 9 | −IN C | Inverting Input, Channel C |
| 10 | +IN C | Noninverting Input, Channel C |
| 11 | V− | Negative Supply Voltage |
| 12 | +IN D | Noninverting Input, Channel D |
| 13 | −IN D | Inverting Input, Channel D |
| 14 | OUT D | Output, Channel D |

### TYPICAL PERFORMANCE CHARACTERISTICS

T_{A} = 25°C, unless otherwise noted.

![Figure 6. Input Offset Voltage Distribution, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f007.png)

*Figure 6. Input Offset Voltage Distribution, V_{SY} = ±2.5 V*

Digitized data: [input-offset-voltage-distribution-vsy-2-5-v.csv](ada4522-2/curves/input-offset-voltage-distribution-vsy-2-5-v.csv) (x: µV; y: ) — values read off the printed plot by the digitizer, not published data.

![Figure 7. Input Offset Voltage Drift Distribution, V_{SY} = ±2.5V](ada4522-2/figures/ada4522-2-f010.png)

*Figure 7. Input Offset Voltage Drift Distribution, V_{SY} = ±2.5V*

Digitized data: [input-offset-voltage-drift-distribution-vsy-2-5v.csv](ada4522-2/curves/input-offset-voltage-drift-distribution-vsy-2-5v.csv) (x: nV/°C; y: AMPLIFIERS) — values read off the printed plot by the digitizer, not published data.

![Figure 8. Input Offset Voltage Distribution, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f008.png)

*Figure 8. Input Offset Voltage Distribution, V_{SY} = ±15 V*

Digitized data: [input-offset-voltage-distribution-vsy-15-v.csv](ada4522-2/curves/input-offset-voltage-distribution-vsy-15-v.csv) (x: µV; y: ) — values read off the printed plot by the digitizer, not published data.

![Figure 9. Input Offset Voltage Drift Distribution, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f011.png)

*Figure 9. Input Offset Voltage Drift Distribution, V_{SY} = ±15 V*

Digitized data: [input-offset-voltage-drift-distribution-vsy-15-v.csv](ada4522-2/curves/input-offset-voltage-drift-distribution-vsy-15-v.csv) (x: nV/°C; y: AMPLIFIERS) — values read off the printed plot by the digitizer, not published data.

![Figure 10.Input Offset Voltage Distribution, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f009.png)

*Figure 10.Input Offset Voltage Distribution, V_{SY} = ±27.5 V*

Digitized data: [input-offset-voltage-distribution-vsy-27-5-v.csv](ada4522-2/curves/input-offset-voltage-distribution-vsy-27-5-v.csv) (x: µV; y: amplifiers) — values read off the printed plot by the digitizer, not published data.

![Figure 11.Input Offset Voltage Drift Distribution, V_{SY} = ±27.5V](ada4522-2/figures/ada4522-2-f012.png)

*Figure 11.Input Offset Voltage Drift Distribution, V_{SY} = ±27.5V*

Digitized data: [input-offset-voltage-drift-distribution-vsy-27-5v.csv](ada4522-2/curves/input-offset-voltage-drift-distribution-vsy-27-5v.csv) (x: nV/°C; y: amplifiers) — values read off the printed plot by the digitizer, not published data.

![Figure 12.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V](ada4522-2/figures/ada4522-2-f013.png)

*Figure 12.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V*

Digitized data: [input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-5-v.csv](ada4522-2/curves/input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-5-v.csv) (x: V; y: µV) — values read off the printed plot by the digitizer, not published data.

![Figure 13.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V](ada4522-2/figures/ada4522-2-f016.png)

*Figure 13.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 5 V*

Digitized data: [input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-5-v.csv](ada4522-2/curves/input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-5-v.csv) (x: V; y: pA) — values read off the printed plot by the digitizer, not published data.

![Figure 14.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V](ada4522-2/figures/ada4522-2-f014.png)

*Figure 14.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V*

Digitized data: [input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-30-v.csv](ada4522-2/curves/input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-30-v.csv) (x: V; y: µV) — values read off the printed plot by the digitizer, not published data.

![Figure 15.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V](ada4522-2/figures/ada4522-2-f017.png)

*Figure 15.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 30 V*

Digitized data: [input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-30-v.csv](ada4522-2/curves/input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-30-v.csv) (x: V; y: pA) — values read off the printed plot by the digitizer, not published data.

![Figure 16.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V](ada4522-2/figures/ada4522-2-f015.png)

*Figure 16.Input Offset Voltage (V_{OS}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V*

Digitized data: [input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-55-v.csv](ada4522-2/curves/input-offset-voltage-vos-vs-common-mode-voltage-vcm-vsy-55-v.csv) (x: V; y: uV) — values read off the printed plot by the digitizer, not published data.

![Figure 17.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V](ada4522-2/figures/ada4522-2-f018.png)

*Figure 17.Input Bias Current (I_{B}) vs. Common-Mode Voltage (V_{CM}), V_{SY} = 55 V*

Digitized data: [input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-55-v.csv](ada4522-2/curves/input-bias-current-ib-vs-common-mode-voltage-vcm-vsy-55-v.csv) (x: V; y: pA) — values read off the printed plot by the digitizer, not published data.

![Figure 18.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f019.png)

*Figure 18.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±2.5 V*

Digitized data: [input-bias-current-ib-vs-temperature-vsy-2-5-v.csv](ada4522-2/curves/input-bias-current-ib-vs-temperature-vsy-2-5-v.csv) (x: °C; y: pA) — values read off the printed plot by the digitizer, not published data.

![Figure 19.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f022.png)

*Figure 19.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±27.5 V*

Digitized data: [input-bias-current-ib-vs-temperature-vsy-27-5-v.csv](ada4522-2/curves/input-bias-current-ib-vs-temperature-vsy-27-5-v.csv) (x: °C; y: pA) — values read off the printed plot by the digitizer, not published data.

![Figure 20.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f020.png)

*Figure 20.Input Bias Current (I_{B}) vs. Temperature, V_{SY} = ±15 V*

Digitized data: [input-bias-current-ib-vs-temperature-vsy-15-v.csv](ada4522-2/curves/input-bias-current-ib-vs-temperature-vsy-15-v.csv) (x: °C; y: pA) — values read off the printed plot by the digitizer, not published data.

![Figure 21.Supply Current (I_{SY}) per Amplifier vs. Supply Voltage V_{SY}](ada4522-2/figures/ada4522-2-f023.png)

*Figure 21.Supply Current (I_{SY}) per Amplifier vs. Supply Voltage V_{SY}*

![Figure 22.Output Voltage High (V_{OH}) to Supply Rail vs. Load Current (I_{LOAD})](ada4522-2/figures/ada4522-2-f021.png)

*Figure 22.Output Voltage High (V_{OH}) to Supply Rail vs. Load Current (I_{LOAD})*

Digitized data: [output-voltage-high-voh-to-supply-rail-vs-load-current-iload.csv](ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-load-current-iload.csv) (x: mA; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 23.Output Voltage Low (V_{OL}) to Supply Rail vs. Load Current (I_{LOAD})](ada4522-2/figures/ada4522-2-f024.png)

*Figure 23.Output Voltage Low (V_{OL}) to Supply Rail vs. Load Current (I_{LOAD})*

Digitized data: [output-voltage-low-vol-to-supply-rail-vs-load-current-iload.csv](ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-load-current-iload.csv) (x: mA; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 24.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f025.png)

*Figure 24.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V*

Digitized data: [output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-2-5-v.csv](ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-2-5-v.csv) (x: °C; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 25.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f028.png)

*Figure 25.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±2.5 V*

Digitized data: [output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-2-5-v.csv](ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-2-5-v.csv) (x: °C; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 26.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f026.png)

*Figure 26.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±15 V*

Digitized data: [output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-15-v.csv](ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-15-v.csv) (x: °C; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 27.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f029.png)

*Figure 27.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±15 V*

Digitized data: [output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-15-v.csv](ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-15-v.csv) (x: °C; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 28.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f027.png)

*Figure 28.Output Voltage High (V_{OH}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V*

Digitized data: [output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-27-5-v.csv](ada4522-2/curves/output-voltage-high-voh-to-supply-rail-vs-temperature-vsy-27-5-v.csv) (x: °C; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 29.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f030.png)

*Figure 29.Output Voltage Low (V_{OL}) to Supply Rail vs. Temperature, V_{SY} = ±27.5 V*

Digitized data: [output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-27-5-v.csv](ada4522-2/curves/output-voltage-low-vol-to-supply-rail-vs-temperature-vsy-27-5-v.csv) (x: °C; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 30.CMRR vs. Frequency](ada4522-2/figures/ada4522-2-f068.png)

*Figure 30.CMRR vs. Frequency*

Digitized data: [cmrr-vs-frequency.csv](ada4522-2/curves/cmrr-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 31.PSRR vs. Frequency](ada4522-2/figures/ada4522-2-f067.png)

*Figure 31.PSRR vs. Frequency*

Digitized data: [psrr-vs-frequency.csv](ada4522-2/curves/psrr-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 32.Closed-Loop Output Impedance vs. Frequency](ada4522-2/figures/ada4522-2-f069.png)

*Figure 32.Closed-Loop Output Impedance vs. Frequency*

Digitized data: [closed-loop-output-impedance-vs-frequency.csv](ada4522-2/curves/closed-loop-output-impedance-vs-frequency.csv) (x: Hz; y: Ω) — values read off the printed plot by the digitizer, not published data.

![Figure 33.Supply Current (I_{SY}) per Amplifier vs. Temperature, V_{SY} = 5V, 30V, 55V](ada4522-2/figures/ada4522-2-f070.png)

*Figure 33.Supply Current (I_{SY}) per Amplifier vs. Temperature, V_{SY} = 5V, 30V, 55V*

Digitized data: [supply-current-isy-per-amplifier-vs-temperature-vsy-5v-30v-55v.csv](ada4522-2/curves/supply-current-isy-per-amplifier-vs-temperature-vsy-5v-30v-55v.csv) (x: °C; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 34.Open-Loop Gain and Phase Margin vs. Frequency Figure 35.Closed-Loop Gain vs. Frequency](ada4522-2/figures/ada4522-2-f071.png)

*Figure 34.Open-Loop Gain and Phase Margin vs. Frequency*

Digitized data: [open-loop-gain-and-phase-margin-vs-frequency-figure-35-closed-loop-gain-vs-frequ.csv](ada4522-2/curves/open-loop-gain-and-phase-margin-vs-frequency-figure-35-closed-loop-gain-vs-frequ.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 35.Closed-Loop Gain vs. Frequency](ada4522-2/figures/ada4522-2-f072.png)

*Figure 35.Closed-Loop Gain vs. Frequency*

Digitized data: [closed-loop-gain-vs-frequency.csv](ada4522-2/curves/closed-loop-gain-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 36.Large Signal Transient Response, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f074.png)

*Figure 36.Large Signal Transient Response, V_{SY} = ±2.5 V*

![Figure 37.Small Signal Transient Response, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f073.png)

*Figure 37.Small Signal Transient Response, V_{SY} = ±2.5 V*

![Figure 38.Large Signal Transient Response, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f075.png)

*Figure 38.Large Signal Transient Response, V_{SY} = ±15 V*

![Figure 39.Small Signal Transient Response, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f076.png)

*Figure 39.Small Signal Transient Response, V_{SY} = ±15 V*

![Figure 40.Large Signal Transient Response, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f077.png)

*Figure 40.Large Signal Transient Response, V_{SY} = ±27.5 V*

![Figure 41.Small Signal Transient Response, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f078.png)

*Figure 41.Small Signal Transient Response, V_{SY} = ±27.5 V*

![Figure 42.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f033.png)

*Figure 42.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±2.5 V*

Digitized data: [small-signal-overshoot-vs-load-capacitance-vsy-2-5-v.csv](ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-vsy-2-5-v.csv) (x: pF; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 43.Channel Separation vs. Frequency, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f036.png)

*Figure 43.Channel Separation vs. Frequency, V_{SY} = ±2.5 V*

Digitized data: [channel-separation-vs-frequency-vsy-2-5-v.csv](ada4522-2/curves/channel-separation-vs-frequency-vsy-2-5-v.csv) (x: kHz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 44.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f034.png)

*Figure 44.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±15 V*

Digitized data: [small-signal-overshoot-vs-load-capacitance-vsy-15-v.csv](ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-vsy-15-v.csv) (x: pF; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 45.Channel Separation vs. Frequency, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f037.png)

*Figure 45.Channel Separation vs. Frequency, V_{SY} = ±15 V*

Digitized data: [channel-separation-vs-frequency-vsy-15-v.csv](ada4522-2/curves/channel-separation-vs-frequency-vsy-15-v.csv) (x: kHz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 46.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f035.png)

*Figure 46.Small Signal Overshoot vs. Load Capacitance, V_{SY} = ±27.5 V*

Digitized data: [small-signal-overshoot-vs-load-capacitance-vsy-27-5-v.csv](ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-vsy-27-5-v.csv) (x: pF; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 47.Channel Separation vs. Frequency, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f038.png)

*Figure 47.Channel Separation vs. Frequency, V_{SY} = ±27.5 V*

Digitized data: [channel-separation-vs-frequency-vsy-27-5-v.csv](ada4522-2/curves/channel-separation-vs-frequency-vsy-27-5-v.csv) (x: kHz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 48.THD + N vs. Amplitude, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f080.png)

*Figure 48.THD + N vs. Amplitude, V_{SY} = ±2.5 V*

Digitized data: [thd-n-vs-amplitude-vsy-2-5-v.csv](ada4522-2/curves/thd-n-vs-amplitude-vsy-2-5-v.csv) (x: V rms; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 49.THD + N vs. Frequency, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f079.png)

*Figure 49.THD + N vs. Frequency, V_{SY} = ±2.5 V*

Digitized data: [thd-n-vs-frequency-vsy-2-5-v.csv](ada4522-2/curves/thd-n-vs-frequency-vsy-2-5-v.csv) (x: Hz; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 50.THD + N vs. Amplitude, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f081.png)

*Figure 50.THD + N vs. Amplitude, V_{SY} = ±15 V*

Digitized data: [thd-n-vs-amplitude-vsy-15-v.csv](ada4522-2/curves/thd-n-vs-amplitude-vsy-15-v.csv) (x: V rms; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 51.THD + N vs. Frequency, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f082.png)

*Figure 51.THD + N vs. Frequency, V_{SY} = ±15 V*

Digitized data: [thd-n-vs-frequency-vsy-15-v.csv](ada4522-2/curves/thd-n-vs-frequency-vsy-15-v.csv) (x: Hz; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 52.THD + N vs. Amplitude, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f083.png)

*Figure 52.THD + N vs. Amplitude, V_{SY} = ±27.5 V*

Digitized data: [thd-n-vs-amplitude-vsy-27-5-v.csv](ada4522-2/curves/thd-n-vs-amplitude-vsy-27-5-v.csv) (x: V rms; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 53.THD + N vs. Frequency, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f084.png)

*Figure 53.THD + N vs. Frequency, V_{SY} = ±27.5 V*

Digitized data: [thd-n-vs-frequency-vsy-27-5-v.csv](ada4522-2/curves/thd-n-vs-frequency-vsy-27-5-v.csv) (x: Hz; y: %) — values read off the printed plot by the digitizer, not published data.

![Figure 54.Positive Overload Recovery, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f086.png)

*Figure 54.Positive Overload Recovery, V_{SY} = ±2.5 V*

![Figure 55.Negative Overload Recovery, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f085.png)

*Figure 55.Negative Overload Recovery, V_{SY} = ±2.5 V*

![Figure 56.Positive Overload Recovery, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f087.png)

*Figure 56.Positive Overload Recovery, V_{SY} = ±15 V*

![Figure 57.Negative Overload Recovery, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f088.png)

*Figure 57.Negative Overload Recovery, V_{SY} = ±15 V*

![Figure 58.Positive Overload Recovery, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f089.png)

*Figure 58.Positive Overload Recovery, V_{SY} = ±27.5 V*

![Figure 59.Negative Overload Recovery, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f090.png)

*Figure 59.Negative Overload Recovery, V_{SY} = ±27.5 V*

![Figure 60.Voltage Noise Density vs. Frequency, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f092.png)

*Figure 60.Voltage Noise Density vs. Frequency, V_{SY} = ±2.5 V*

Digitized data: [voltage-noise-density-vs-frequency-vsy-2-5-v.csv](ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-2-5-v.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 61.Voltage Noise Density vs. Frequency, V_{SY} = 5V, 30V,](ada4522-2/figures/ada4522-2-f091.png)

*Figure 61.Voltage Noise Density vs. Frequency, V_{SY} = 5V, 30V,*

Digitized data: [voltage-noise-density-vs-frequency-vsy-5v-30v.csv](ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-5v-30v.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 62.Voltage Noise Density vs. Frequency, V_{SY} = ±15 V](ada4522-2/figures/ada4522-2-f093.png)

*Figure 62.Voltage Noise Density vs. Frequency, V_{SY} = ±15 V*

Digitized data: [voltage-noise-density-vs-frequency-vsy-15-v.csv](ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-15-v.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 63.0.1 Hz to 10 Hz Noise](ada4522-2/figures/ada4522-2-f094.png)

*Figure 63.0.1 Hz to 10 Hz Noise*

![Figure 64.Voltage Noise Density vs. Frequency, V_{SY} = ±27.5 V](ada4522-2/figures/ada4522-2-f095.png)

*Figure 64.Voltage Noise Density vs. Frequency, V_{SY} = ±27.5 V*

Digitized data: [voltage-noise-density-vs-frequency-vsy-27-5-v.csv](ada4522-2/curves/voltage-noise-density-vs-frequency-vsy-27-5-v.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 65.Current Noise Density vs. Frequency](ada4522-2/figures/ada4522-2-f096.png)

*Figure 65.Current Noise Density vs. Frequency*

Digitized data: [current-noise-density-vs-frequency.csv](ada4522-2/curves/current-noise-density-vs-frequency.csv) (x: Hz; y: pA/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 66.Negative Settling Time to 0.1%, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f097.png)

*Figure 66.Negative Settling Time to 0.1%, V_{SY} = ±2.5 V*

![Figure 67.Positive Settling Time to 0.1%, V_{SY} = ±2.5 V](ada4522-2/figures/ada4522-2-f098.png)

*Figure 67.Positive Settling Time to 0.1%, V_{SY} = ±2.5 V*

![Figure 68.Negative Settling Time to 0.1%, V_{SY} = ±15 V and ±27.5 V](ada4522-2/figures/ada4522-2-f099.png)

*Figure 68.Negative Settling Time to 0.1%, V_{SY} = ±15 V and ±27.5 V*

![Figure 69.Positive Settling Time to 0.1%, V_{SY} = ±15 V and ±27.5 V](ada4522-2/figures/ada4522-2-f100.png)

*Figure 69.Positive Settling Time to 0.1%, V_{SY} = ±15 V and ±27.5 V*

![Figure 70.Output Voltage Swing vs. Frequency](ada4522-2/figures/ada4522-2-f043.png)

*Figure 70.Output Voltage Swing vs. Frequency*

Digitized data: [output-voltage-swing-vs-frequency.csv](ada4522-2/curves/output-voltage-swing-vs-frequency.csv) (x: Hz; y: V p-p) — values read off the printed plot by the digitizer, not published data.


### THEORY OF OPERATION

The ADA4522-1/ADA4522-2/ADA4522-4 are single, dual, and quad, ultralow noise, high voltage, zero drift, rail-to-rail output operational amplifiers. They feature a chopping technique that offers an ultralow input offset voltage of 5 µV and an input offset voltage drift of 22 nV/°C maximum for the ADA4522-1 and ADA4522-2 and 25 nV/°C maximum for the ADA4522-4 .  Offset  voltage  errors  due  to  common-mode voltage swings and power supply variations are also corrected by the chopping technique, resulting in a superb typical CMRR figure of 160 dB and a PSRR figure of 160 dB at a 30 V supply voltage.

The ADA4522-1/ADA4522-2/ADA4522-4 have wide operating voltages from ±2.25 V (or 4.5 V) to ±27.5 V (or 55 V). The devices are single supply amplifiers, where their input voltage range includes the lower supply rail. They also offer low voltage noise density of 5.8 nV/√Hz (at f = 1 kHz, A_{V} = 100) and reduced 1/f noise component. These features are ideal for the amplification of low level signals in high precision applications. A few examples of such applications are weigh scales, high precision current sensing, high voltage buffers, and signal conditioning for temperature sensors, among others.

Figure 71 shows the ADA4522-1/ADA4522-2/ADA4522-4 architecture block diagram. The architecture consists of an input EMI filter and clamp circuitry, three gain stages (Gm1, Gm2, and Gm3), input and output chopping networks (CHOPIN and CHOPOUT), a clock generator, offset and ripple correction loop circuitry, frequency compensation capacitors (C1, C2, and C3), and thermal shutdown circuitry.

An  EMI  filter  and  clamp  circuit  is  implemented  at  the  input  front  end  to  protect  the  internal  circuitry  against electrostatic  discharge  (ESD)  stresses  and  high  voltage  transients.  The  ability  of  the  amplifier  to  reject  EMI  is explained in the EMI Rejection Ratio section.

CHOPIN and CHOPOUT are controlled by a clock generator and operate at 4.8 MHz. The input baseband signal is initially modulated by CHOPIN. Next, CHOPOUT demodulates the input signal and modulates the millivolt level input offset voltage and 1/f noise of the input transconductance amplifier, Gm1, to the chopping frequency at 4.8 MHz. The chopping networks remove the low frequency errors, but, in return, the networks introduce chopping artifacts at the chopping frequency. Therefore, a offset and ripple correction loop, operating at 800 kHz, is used. This frequency is the switching frequency of the amplifier. This circuitry reduces chopping artifacts, allowing the ADA4522-1/ADA45222/ADA4522-4 to have a high chopping frequency with minimal artifacts.

The thermal shutdown circuit shuts down the circuit when the die is overheated (see the Thermal Shutdown section for more information).

![Figure 71.ADA4522-1/ADA4522-2/ADA4522-4 Architecture Block Diagram](ada4522-2/figures/ada4522-2-f044.png)

*Figure 71.ADA4522-1/ADA4522-2/ADA4522-4 Architecture Block Diagram*

### On-Chip Input EMI Filter and Clamp Circuit

Figure  72 shows  the  input  EMI  filter  and  clamp  circuit.  The  ADA4522-1/ADA4522-2/ADA4522-4  have  internal  ESD protection diodes (D1, D2, D3, and D4) that are connected between the inputs and each supply rail. These diodes protect the input transistors in the event of electrostatic discharge and are reverse biased during normal operation. This protection scheme allows voltages as high as approximately 300 mV beyond the rails to be applied at the input of either terminal without causing permanent damage. See Table 5 in the Absolute Maximum Ratings section for more information.

The EMI filter is composed of two 200 Ω input series resistors (R_{S1} and R_{S2}), two common-mode capacitors (C_{CM1} and C_{CM2}), and a differential capacitor (C_{DM}). These RC networks set the -3 dB low -pass cutoff frequencies at 50 MHz for common-mode signals, and at 33 MHz for differential signals. After the EMI filter, back to back diodes (D5 and D6) are added to protect internal circuit devices from high voltage input transients. Each diode has about 1 V of forward turn on voltage. See the Large Signal Transient Response section for more information on the effect of high voltage input transient on the ADA4522-1/ADA4522-2/ADA4522-4.

As specified in the Absolute Maximum Ratings section (see Table 5), the maximum input differential voltage is limited to ±5 V. If more than ±5 V is applied, a continuous current larger than ±10 mA flows through one of the back to back diodes. This current compromises long-term reliability and can cause permanent damage to the device.

![Figure 72.Input EMI Filter and Clamp Circuit](ada4522-2/figures/ada4522-2-f045.png)

*Figure 72.Input EMI Filter and Clamp Circuit*

### Thermal Shutdown

The ADA4522-1/ADA4522-2/ADA4522-4 have internal thermal shutdown circuitry for each channel of the amplifier. The thermal shutdown circuitry prevents internal devices from being damaged by an overheat condition in the die. Overheating can occur due to a high ambient temperature, a high supply voltage, and/or high output currents. As specified in Table 5, take care to maintain the junction temperature below 150°C.

Two conditions affect junction temperature (T_{J} ):  the  total  power  dissipation  of  the  device  (P_{D} )  and  the  ambient temperature  surrounding  the  package  (T_{A} ).  Use  the  following  equation  to  estimate  the  approximate  junction temperature:

![Equation as printed (p. 29)](ada4522-2/figures/ada4522-2-eq01.png)

$$T_{J} = P_{D} \times \theta_{JA} + T_{A}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

where θ_{JA} is the thermal resistance between the die and the ambient environment, as shown in Table 6 .

The total power dissipation is the sum of quiescent power of the device and the power required to drive a load for all channels of an amplifier. The power dissipation per amplifier (P_{D_PER_AMP} ) for sourcing a load is shown in Equation 2.

![Equation as printed (p. 29)](ada4522-2/figures/ada4522-2-eq02.png)

$$P_{D\_PER\_AMP} = ( V_{SY+} - V_{SY-} ) \times I_{SY\_PER\_AMP} + I_{OUT} \times ( V_{SY+} - V_{OUT} ) \quad $$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

When sinking current, replace (V_{SY+} - V_{OUT} ) in Equation 2 with (V_{OUT} - V_{SY−}).

Also, take note to include the power dissipation of all channels of the amplifier when calculating the total power dissipation for the ADA4522-1/ADA4522-2/ADA4522-4.

The thermal shutdown circuitry does not guarantee the device to be free of permanent damage if the junction temperature exceeds 150°C. However, the internal thermal shutdown function may help avoid permanent damage or reduce the degree of damage. Each amplifier channel has thermal shutdown circuitry, composed of a temperature sensor with hysteresis.

As soon as the junction temperature reaches 190°C, the thermal shutdown circuitry shuts down the amplifier. Note that either one of the two thermal shutdown circuitries is activated; this activation disables the channel. When the amplifier is disabled, the output becomes open state and the quiescent current of the channel decreases to 0.1 mA. When the junction temperature cools down to 160°C, the thermal shutdown circuitry enables the amplifier and the quiescent current increases to its typical value.

When overheating in the die is caused by an undesirable excess amount of output current, the thermal shutdown circuit repeats its function. The junction temperature keeps increasing until it reaches 190°C and one of the channels is disabled. Then, the junction temperature cools down until it reaches 160°C, and the channel is enabled again. The process then repeats.

### Input Protection

When either input of the ADA4522-1/ADA4522-2/ADA4522-4 exceeds one of the supply rails by more than 300 mV, the ESD diodes mentioned in the On-Chip Input EMI Filter and Clamp Circuit section become forward-biased and large amounts  of  current  begin  to  flow  through  them.  Without  current  limiting,  this  excessive  fault  current  causes permanent damage to the device. If the inputs are expected to be subject to overvoltage conditions, insert a resistor in series with each input to limit the input current to ±10 mA maximum. However, consider the resistor thermal noise effect on the entire circuit.

At a ±15 V supply voltage, the broadband voltage noise of the ADA4522-1/ADA4522-2/ADA4522-4 is approximately 5.8 nV/√Hz (at unity gain), and a 1 kΩ resistor has a thermal noise of 4 nV/√Hz. Adding a 1 kΩ resistor increases the total noise to 7 nV/√Hz.

### Single-Supply and Rail-to-Rail Output

The ADA4522-1/ADA4522-2/ADA4522-4 are single-supply amplifiers, where their input voltage range includes the lower supply rail. This feature is ideal for applications where the input common-mode voltage is at the lower supply rail, for example, ground sensing. Conversely, the amplifier output is rail to rail. Figure 73 shows the input and output waveforms of the ADA4522-1/ADA4522-2/ADA4522-4 configured as a unity-gain buffer with a supply voltage of ±15 V. With an input voltage of ±15 V, the low output voltage tracks the input voltage, whereas the high output swing clamps/ distorts when the input goes out of the input voltage range (-15 V ≤ IVR ≤ +13.5 V). However, the device does not exhibit phase reversal.

![Figure 73.Input and Output Waveforms, No Phase Reversal](ada4522-2/figures/ada4522-2-f046.png)

*Figure 73.Input and Output Waveforms, No Phase Reversal*

### Large Signal Transient Response

When the ADA4522-1/ADA4522-2/ADA4522-4 are configured in a closed-loop configuration with a large input transient (for example, a step input voltage), the internal back to back diodes may turn on. Consider a case where the amplifier is in unity-gain configuration with a step input waveform. This case is shown in Figure 74 .

The noninverting input is driven by an input signal source and the inverting input is driven by the output of the amplifier. The maximum amplifier output current depends on the input step function and the external source resistance at the input terminals of the amplifier.

### Case 1

If the external source resistance is low (for example, 100 Ω in Figure 75) or if the input step function is large, the maximum amplifier output current is limited to the output short-circuit current as specified in the Specifications section. The maximum differential voltage between the input signal and the amplifier output is then limited by the maximum amplifier output current multiplied by the total input resistance (internal and external) and the turn-on voltage of the back to back diode (see Figure 72 for the input EMI filter and clamp circuit architecture).

When the noninverting input voltage changes with a step signal, the inverting input voltage (and, therefore, the output voltage) follows the change quickly until it reaches the maximum differential voltage between the input signal and amplifier output possible. The inverting input voltage then starts slewing with the slew rate specified in the Specifications section until it reaches its desired output. Therefore, as seen in Figure 74, there are two distinctive sections of the rising and falling edge of the output waveform. With this test condition, the amount and duration of the input/output current is limited and, therefore, does not damage the amplifier.

![Figure 74.Large Signal Transient Response Example](ada4522-2/figures/ada4522-2-f047.png)

*Figure 74.Large Signal Transient Response Example*

![Figure 75.Circuit Diagram for Large Signal Transient Response](ada4522-2/figures/ada4522-2-f048.png)

*Figure 75.Circuit Diagram for Large Signal Transient Response*

### Case 2

If the external source resistance is high or if the input step function is small, the maximum output current is limited to the instantaneous difference between the input signal and amplifier output voltage (which is the change in the step function) divided by the source resistance. This maximum output current is less than the amplifier output short-circuit current. The maximum differential voltage between the input signal and the amplifier output is then equal to the step function. The output voltage slews until it reaches its desired output.

Therefore, if desired, reduce the input current by adding a larger external resistor between the signal source and the noninverting input. Similarly, to reduce output current, add an external resistor to the feedback loop between the inverting input and output. This large signal transient response issue is typically not a problem when the amplifier is configured in closed-loop gain, where the input signal source is usually much smaller and the gain and feedback resistors limit the current.

Back to back diodes are also implemented in many other amplifiers; these amplifiers show similar slewing behavior.

### Noise Considerations

### 1/f Noise

1/f noise, also known as pink noise or flicker noise, is inherent in semiconductor devices and increases as frequency decreases. At a low frequency, 1/f noise is a major noise contributor and causes a significant output voltage offset when amplified by the noise gain of the circuit. However, because the low frequency 1/f noise appears as a slow varying offset to the ADA4522-1/ADA4522-2/ADA4522-4, it is effectively reduced by the chopping technique. This technique allows the ADA4522-1/ADA4522-2/ADA4522-4 to have a much lower noise at dc and low frequency in comparison to standard low noise amplifiers that are susceptible to 1/f noise. Figure 63 shows the 0.1 Hz to 10 Hz noise to be only 117 nV p-p of noise.

### Source Resistance

The ADA4522-1/ADA4522-2/ADA45224 are some of the lowest noise high voltage zero drift amplifiers with 5.8 nV/√Hz of voltage noise density at 1 kHz (A_{V} = 100). Therefore, it is important to consider the input source resistance of choice to maintain a total low noise. The total input referred broadband noise (e_{N} total) from any amplifier is primarily a function of three types of noise: input voltage noise, input current noise, and thermal (Johnson) noise from the external resistors.

These uncorrelated noise sources can be summed up in a root sum squared (rss) manner by using the following equation:

![Equation as printed (p. 33)](ada4522-2/figures/ada4522-2-eq03.png)

$$ e_N\ total = ({e_N}^2 + 4 kTR_S + (I_N \times R_S)^2)^{1/2} $$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

where:

e_{N} is the input voltage noise density of the amplifier (V/√Hz).

k is the Boltzmann constant (1.38 × 10^{−23} J/K).

T is the temperature in Kelvin (K).

R_{S} is the total input source resistance (Ω).

I_{N} is the input current noise density of the amplifier (A/√Hz).

The total equivalent rms noise over a specific bandwidth is expressed as:

![Equation as printed (p. 33)](ada4522-2/figures/ada4522-2-eq04.png)

$$e_{N \ RMS} = e_{N} total \sqrt{BW}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

where BW is the bandwidth in hertz.

This analysis is valid for broadband noise calculation up to a decade before the switching frequency. If the bandwidth of concern includes the switching frequency, more complicated calculations must be made to include the effect of the increase in noise at the switching frequency.

With a low source resistance of R_{S} < 1 kΩ, the voltage noise of the amplifier dominates. As the source resistance increases, the thermal noise of R_{S} dominates. As the source resistance further increases, where R_{S} > 50 kΩ, the current noise becomes the main contributor of the total input noise.

### Residual Ripple

As shown in Figure 60, Figure 62,  and Figure 64,  the ADA4522-1/ADA4522-2/ADA4522-4 have a flat noise spectrum density at lower frequencies and exhibits spectrum density bumps and peaks at higher frequencies.

The  largest  noise  bump  is  centered  at  6  MHz;  this  bump  is  due  to  the  decrease  in  the  input  gain  at  higher frequencies.This decrease is a typical phenomenon and can also be seen in other amplifiers. In addition to the noise bump, a sharp peak due to the chopping networks is seen at 4.8 MHz. However, this magnitude is significantly reduced by the offset and ripple correction loop. Its magnitude may be different with different amplifier units or with different circuitries around the amplifier. This peak can potentially be hidden by the noise bump and, therefore, may not be detected.

The offset and ripple correction loop, designed to reduce the 4.8 MHz switching artifact, also creates a noise bump centered at 800 kHz and a noise peak on top of this noise bump. Although the magnitude of the bump is mostly constant, the magnitude of the 800 kHz peak is different from unit to unit. Some units may not exhibit the 800 kHz noise peak; however, for other units, peaks occur at multiple integrals of 800 kHz, such as 1.6 MHz or 2.4 MHz.

These noise peaks, albeit small in magnitude, can be significant when the amplifier has a closed-loop frequency that is higher than the chopping frequency. To suppress the noise spike to a desired level, either configure the amplifier in a high gain configuration or apply a post filter at the output of the amplifier.

Figure 76 shows the voltage noise density of the ADA4522-1/ADA4522-2/ADA4522-4 in various gain configurations. Note that the higher the gain, the lower the available bandwidth is. The earlier bandwidth roll-off effectively filters out the higher noise spectrum.

![Figure 76.Voltage Noise Density with Various Gains](ada4522-2/figures/ada4522-2-f049.png)

*Figure 76.Voltage Noise Density with Various Gains*

Digitized data: [voltage-noise-density-with-various-gains.csv](ada4522-2/curves/voltage-noise-density-with-various-gains.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

Figure 77 shows the voltage noise density of the ADA4522-1/ADA4522-2/ADA4522-4 without and with post filters at different frequencies. The post filter serves to roll off the bandwidth before the switching frequency. In this example, the noise peak at 800 kHz is about 38 nV/√Hz. With a post filter at 80 kHz, the noise peak is reduced to 4.1 nV/√Hz. With a post filter at 8 kHz, the noise peak is lower than the noise floor and cannot be detected.

![Figure 77.Voltage Noise Density with Post Filters](ada4522-2/figures/ada4522-2-f050.png)

*Figure 77.Voltage Noise Density with Post Filters*

Digitized data: [voltage-noise-density-with-post-filters.csv](ada4522-2/curves/voltage-noise-density-with-post-filters.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

### Current Noise Density

Figure 78 shows the current noise density of the ADA4522-1/ADA4522-2/ADA4522-4 at unity gain. At 1 kHz, the current noise density is about 1.3 pA/√Hz. The current noise density is determined by measuring the voltage noise due to current noise flowing through a resistor. Due to the low current noise density of the amplifier, the voltage noise is usually measured with a high value resistor; in this case, a 100 kΩ source resistor is used. However, the source resistor interacts with the input capacitance of the amplifier and board, causing the bandwidth to roll off. Note that Figure 78 shows the current noise density rolling off much earlier than the unity-gain bandwidth; this roll-off is expected.

![Figure 78.Current Noise Density at Gain = 1](ada4522-2/figures/ada4522-2-f051.png)

*Figure 78.Current Noise Density at Gain = 1*

Digitized data: [current-noise-density-at-gain-1.csv](ada4522-2/curves/current-noise-density-at-gain-1.csv) (x: Hz; y: pA/√Hz) — values read off the printed plot by the digitizer, not published data.

### EMI Rejection Ratio

Circuit  performance  is  often  adversely  affected  by  high  frequency  EMI.  When  the  signal  strength  is  low  and transmission lines are long, an op amp must accurately amplify the input signals. However, all op amp pins -the noninverting input, inverting input, positive supply, negative supply, and output pins -are susceptible to EMI signals. These high frequency signals are coupled into an op amp by various means, such as conduction, near field radiation, or far field radiation. For example, wires and printed circuit board (PCB) traces can act as antennas and pick up high frequency EMI signals.

Amplifiers do not amplify EMI or RF signals due to their relatively low bandwidth. However, due to the nonlinearities of the input devices, op amps can rectify these out of band signals. When these high frequency signals are rectified, they appear as a DC offset at the output.

The ADA4522-1/ADA4522-2/ADA4522-4 have integrated EMI filters at their input stage. To describe the ability of the ADA4522-1/ADA4522-2/ADA4522-4  to  perform  as  intended  in  the  presence  of  electromagnetic  energy,  the electromagnetic interference rejection ratio (EMIRR) of the noninverting pin is specified in Table 2, Table 3, and Table 4 of the Specifications section. A mathematical method of measuring EMIRR is defined as follows:

![Equation as printed (p. 35)](ada4522-2/figures/ada4522-2-eq05.png)

$$ EMIRR = 20\log(V_{IN\_PEAK}/\Delta V_{OS}) \qquad $$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

![Figure 79.EMIRR vs. Frequency](ada4522-2/figures/ada4522-2-f052.png)

*Figure 79.EMIRR vs. Frequency*

Digitized data: [emirr-vs-frequency.csv](ada4522-2/curves/emirr-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

### Capacitive Load Stability

The ADA4522-1/ADA4522-2/ADA4522-4 can safely drive capacitive loads of up to 250 pF in any configuration. As with most amplifiers, driving larger capacitive loads than specified may cause excessive overshoot and ringing, or even oscillation. A heavy capacitive load reduces the phase margin and causes the amplifier frequency response to peak. Peaking corresponds to overshooting or ringing in the time domain. Therefore, it is recommended that external compensation  be  used  if  the  ADA4522-1/ADA4522-2/ADA4522-4  must  drive  a  load  exceeding  250  pF.  This compensation is particularly important in the unity-gain configuration, which is the worst case for stability.

A quick and easy way to stabilize the op amp for capacitive load drive is by adding a series resistor, R_{ISO} , between the amplifier output terminal and the load capacitance, as shown in Figure 80.  R_{ISO} isolates the amplifier output and feedback network from the capacitive load. However, with this compensation scheme, the output impedance as seen by the load increases, and this reduces gain accuracy.

![Figure 80.Stability Compensation with Isolating Resistor, R_{ISO}](ada4522-2/figures/ada4522-2-f053.png)

*Figure 80.Stability Compensation with Isolating Resistor, R_{ISO}*

Figure 81 shows the effect on overshoot with different values of R_{ISO} .

![Figure 81.Small Signal Overshoot vs. Load Capacitance with Various Output Isolating Resistors](ada4522-2/figures/ada4522-2-f054.png)

*Figure 81.Small Signal Overshoot vs. Load Capacitance with Various Output Isolating Resistors*

Digitized data: [small-signal-overshoot-vs-load-capacitance-with-various-output-isolating-resisto.csv](ada4522-2/curves/small-signal-overshoot-vs-load-capacitance-with-various-output-isolating-resisto.csv) (x: pF; y: %) — values read off the printed plot by the digitizer, not published data.

### APPLICATIONS INFORMATION

### Single-Supply Instrumentation Amplifier

The extremely low offset voltage and drift, high open-loop gain, high common-mode rejection, and high power supply rejection of the ADA4522-1/ADA4522-2/ADA4522-4 make them excellent op amp choices as discrete, singlesupply instrumentation amplifiers.

Figure 82 shows the classic 3-op-amp instrumentation amplifier using the ADA4522-1/ADA4522-2/ADA4522-4. The key to high CMRR for the instrumentation amplifier are resistors that are well matched for both the resistive ratio and relative drift. For true difference amplification, matching of the resistor ratio is very important, where R5/R2 = R6/R4.  The  resistors  are  important  in  determining  the  performance  over  manufacturing  tolerances,  time,  and temperature.  Assuming  a  perfect  unity-gain  difference  amplifier  with  infinite  common-mode  rejection,  a  1% tolerance  resistor matching  results  in  only  34  dB  of  common-mode  rejection.  Therefore,  at  least  0.01%  or better  resistors  are recommended.

![Figure 82.Discrete 3-Op-Amp Instrumentation Amplifier](ada4522-2/figures/ada4522-2-f055.png)

*Figure 82.Discrete 3-Op-Amp Instrumentation Amplifier*

To  build  a  discrete  instrumentation  amplifier  with  external  resistors  without  compromising  on  noise,  pay  close attention to the resistor values chosen. R_{G1} and R_{G2} each have thermal noise that is amplified by the total noise gain of the instrumentation amplifier and, therefore, a sufficiently low value must be chosen to reduce thermal noise contribution at the output while still providing an accurate measurement. Table 10 shows the external resistorsʼ noise contribution referred to the output (RTO).

**Table 10. Thermal Noise Contribution Example** ([table-09-p37-data.csv](ada4522-2/tables/table-09-p37-data.csv), p. 37)

| RESISTOR | VALUE (kΩ) | RESISTOR THERMAL NOISE (nV/√Hz) | THERMAL NOISE RTO (nV/√Hz) |
|---|---|---|---|
| RG1 | 0.4 | 2.57 | 128.30 |
| RG2 | 0.4 | 2.57 | 128.30 |
| R1 | 10 | 12.83 | 25.66 |
| R2 | 10 | 12.83 | 25.66 |
| R3 | 10 | 12.83 | 25.66 |
| R4 | 10 | 12.83 | 25.66 |
| R5 | 20 | 18.14 | 18.14 |
| R6 | 20 | 18.14 | 18.14 |

Note that A1 and A2 have a high gain of 1 + R1/R_{G1} . Therefore, use a high precision, low offset voltage and low noise amplifier for A1 and A2, such as the ADA4522-1/ADA4522-2/ADA4522-4. Conversely, A3 operates at a much lower gain and has a different set of op amp requirements. Its input noise, referred to the overall instrumentation amplifier input, is divided by the first stage gain and is not as important. Note that the input offset voltage and the input voltage noise of the amplifiers are also amplified by the overall noise gain.

Any  unused  channel  of  the  ADA4522-1/ADA4522-2/ADA4522-4  must  be  configured  in  unity  gain  with  the  input common-mode voltage tied to the midpoint of the power supplies.

Understanding how noise impacts a discrete instrumentation amplifier or a difference amplifier (the second stage of a  3-op-amp  instrumentation  amplifier)  is  important,  because  they  are  commonly  used  in  many  different applications. The Load Cell/Strain Gauge Sensor Signal Conditioning Using the ADA4522-2 section and the Precision Low-Side Current Shunt Sensor section show the ADA4522-1/ADA4522-2/ADA4522-4 used as a discrete instrumentation or difference amplifier in an application.

### Load Cell/Strain Gauge Sensor Signal Conditioning Using the ADA4522-2

The ADA4522-2, with its ultralow offset, drift, and noise, is well suited to signal condition a low level sensor output with high gain and accuracy. A weigh scale/load cell is an example of an application with such requirements. Figure 83 shows a configuration for a single-supply, precision, weigh scale measurement system. The ADA4522-2 is used at the front end for amplification of the low level signal from the load cell.

Current flowing through a PCB trace produces an IR voltage drop; with longer traces, this voltage drop can be several millivolts  or  more,  introducing  a  considerable  error.  A  1  inch  long,  0.005  inch  wide  trace  of  1  oz  copper  has  a resistance of approximately 100 mΩ at room temperature. With a load current of 10 mA, the resistance can introduce a 1 mV error.

Therefore, a 6-wire load cell is used in the circuit. The load cell has two sense pins, in addition to excitation, ground, and two output connections. The sense pins are connected to the high side (excitation pin) and low side (ground pin) of the Wheatstone bridge. The voltage across the bridge can then be accurately measured regardless of voltage drop due to wire resistance. The two sense pins are also connected to the analog-to-digital converter (ADC) reference inputs  for  a  ratiometric  configuration  that  is  immune  to  low  frequency  changes  in  the  power  supply  excitation voltage.

The ADA4522-2 is  configured  as  the  first  stage  of  a  3-op-amp  instrumentation  amplifier  to  amplify  the  low  level amplitude signal from the load cell by a factor of 1 + 2R1/R_{G} . Capacitors C1 and C2 are placed in the feedback loops of the amplifiers and interact with R1 and R2 to perform low-pass filtering. This filtering limits the amount of noise entering  the  Σ-∆  ADC.  In  addition,  C3,  C4,  C5,  R3,  and  R4  provide  further  common-mode  and  differential  mode filtering to reduce noise and unwanted signals.

![Figure 83.Precision Weigh Scale Measurement System](ada4522-2/figures/ada4522-2-f056.png)

*Figure 83.Precision Weigh Scale Measurement System*

### Precision Low-Side Current Shunt Sensor

Many applications require the sensing of signals near the positive or negative rails. Current shunt sensors are one such  application  and  are  mostly  used  for  feedback  control  systems.  They  are  also  used  in  a  variety  of  other applications, including power metering, battery fuel gauging, and feedback controls in industrial applications. In such  applications,  it  is  desirable  to  use  a  shunt  with  very  low  resistance  to  minimize  series  voltage  drop.  This configuration not only minimizes wasted power, but also allows the measurement of high currents while saving power.

A typical shunt may be 100 mΩ. At a measured current of 1 A, the voltage produced from the shunt is 100 mV, and the amplifier error sources are not critical. However, at low measured current in the 1 mA range, the 100 µV generated across the shunt demands a very low offset voltage and drift amplifier to maintain absolute accuracy. The unique attributes of a zero drift amplifier provide a solution. Figure 84 shows a low-side current sensing circuit using the ADA4522-1/ADA4522-2/ADA4522-4.  The  ADA4522-1/ADA4522-2/ADA4522-4  are  configured  as  difference  amplifiers with a gain of 1000. Although the ADA4522-1/ADA4522-2/ADA4522-4 have high CMRR, the CMRR of the system is limited by the external resistors. Therefore, as mentioned in the Single-Supply Instrumentation Amplifier section, the key to high CMRR for the system is resistors that are well matched from both the resistive ratio and relative drift, where R1/R2 = R3/R4.

Any  unused  channel  of  the  ADA4522-1/ADA4522-2/ADA4522-4  must  be  configured  in  unity  gain  with  the  input common-mode voltage tied to the midpoint of the power supplies.

![Figure 84.Low-Side Current Sensing Circuit](ada4522-2/figures/ada4522-2-f057.png)

*Figure 84.Low-Side Current Sensing Circuit*

*V_{OUT} = AMPLIFIER GAIN × VOLTAGE ACROSS R_{S}*

= 1000 × R_{S} x 1

= 100 × I


### Printed Circuit Board Layout

The ADA4522-1/ADA4522-2/ADA4522-4 are high precision devices with ultralow offset voltage and noise. Therefore, take care in the design of the PCB layout to achieve optimum performance of the ADA4522-1/ADA4522-2/ADA4522-4 at the board level.

To avoid leakage currents, keep the surface of the board clean and free of moisture.

Properly bypassing the power supplies and keeping the supply traces short minimizes power supply disturbances caused by output current variation. Connect bypass capacitors as close as possible to the device supply pins. Stray capacitances are a concern at the outputs and the inputs of the amplifier. It is recommended that signal traces be kept at a distance of at least 5 mm from supply lines to minimize coupling.

A potential source of offset error is the Seebeck voltage on the circuit board. The Seebeck voltage occurs at the junction of two dissimilar metals and is a function of the temperature of the junction. The most common metallic junctions on a circuit board are solder to board traces and solder to component leads. Figure 85 shows a cross section of  a  surface-mount component soldered to a PCB. A variation in temperature across the board (where T A1 ≠  T A2 ) causes a mismatch in the Seebeck voltages at the solder joints, thereby resulting in thermal voltage errors that degrade the performance of the ultralow offset voltage of the ADA4522-1/ADA4522-2/ADA4522-4.

![Figure 85.Mismatch in Seebeck Voltages Causes Seebeck Voltage Error](ada4522-2/figures/ada4522-2-f058.png)

*Figure 85.Mismatch in Seebeck Voltages Causes Seebeck Voltage Error*

In Figure  85,  V _{SC1} and  V_{SC2} are  the  Seebeck  voltages  due  to  solder  to  component  at  Junction  1  and  Junction  2, respectively. V_{TS1} and V_{TS2} are the Seebeck voltages due to solder to trace at Junction 1 and Junction 2. T_{A1} and T_{A2} are the temperatures of Junction 1 and Junction 2, respectively.

To  minimize  these  thermocouple  effects,  orient  resistors  so  that  heat  sources  warm  both  ends  equally.  Where possible, it is recommended that the input signal paths contain matching numbers and types of components to match the number and type of thermocouple junctions. For example,  dummy components, such as  zero  value resistors, can be used to match the thermoelectric error source (real resistors in the opposite input path). Place matching components in close proximity and orient them in the same manner to ensure equal Seebeck voltages, thus  canceling  thermal  errors.  Additionally,  use  leads  that  are  of  equal  length  to  keep  thermal  conduction  in equilibrium. Keep heat sources on the PCB as far away from amplifier input circuitry as is practical.

It  is  highly  recommended  to  use  a  ground  plane.  A  ground  plane  helps  distribute  heat  throughout  the  board, maintain a constant temperature across the board, and reduce EMI noise pickup.

### Comparator Operation

An op amp is designed to operate in a closed-loop configuration with feedback from its output to its inverting input. In contrast to op amps, comparators are designed to operate in an open-loop configuration and to drive logic circuits. Although op amps are different from comparators, occasionally an unused section of a dual op amp is used as a comparator  to  save  board  space  and  cost;  however,  this  is  not  recommended  for  the  ADA4522-1/ADA4522-2/ ADA4522-4.

Figure 86 and Figure 87 show the ADA4522-1/ADA4522-2/ADA4522-4 configured as a comparator, with 10 kΩ resistors in  series  with  the  input  pins.  Any  unused  channels  are  configured  as  buffers  with  the  input  voltage  kept  at  the midpoint of the power supplies. The ADA4522-1/ADA4522-2/ADA4522-4 have input devices that are protected from large differential input voltages by Diode D5 and Diode D6, as shown in Figure 72. These diodes consist of substrate PNP  bipolar  transistors,  and  conduct  whenever  the  differential  input  voltage  exceeds  approximately  600  mV; however, these diodes also allow a current path from the input to the lower supply rail, resulting in an increase in the total supply current of the system. Both comparator configurations yield the same result. At 30 V of power supply, I_{SY+} remains at 1.55 mA per dual amplifier, but I SYincreases close to 2 mA in magnitude per dual amplifier.

![Figure 86.Comparator Configuration A](ada4522-2/figures/ada4522-2-f059.png)

*Figure 86.Comparator Configuration A*

![Figure 87.Comparator Configuration B](ada4522-2/figures/ada4522-2-f060.png)

*Figure 87.Comparator Configuration B*

![Figure 88.Supply Current (I_{SY}) per Dual Amplifier vs. Supply Voltage (V_{SY}) (ADA4522-1/ADA4522-2/ADA4522-4 as a Comparator)](ada4522-2/figures/ada4522-2-f061.png)

*Figure 88.Supply Current (I_{SY}) per Dual Amplifier vs. Supply Voltage (V_{SY}) (ADA4522-1/ADA4522-2/ADA4522-4 as a Comparator)*

Digitized data: [supply-current-isy-per-dual-amplifier-vs-supply-voltage-vsy-ada4522-1-ada4522-2-.csv](ada4522-2/curves/supply-current-isy-per-dual-amplifier-vs-supply-voltage-vsy-ada4522-1-ada4522-2-.csv) (x: V; y: mA) — values read off the printed plot by the digitizer, not published data.

Note that 10 kΩ resistors are used in series with the input of the op amp. If smaller resistor values are used, the supply current of the system increases much more. For more details on op amps as comparators, see the AN-849 Application Note, Using Op Amps as Comparators.

### Use of Large Source Resistance

The ADA4522-1/ADA4522-2/ADA4522-4 are designed to work with low value source resistance. Note that the amplifier has an ultralow voltage noise density of 6 nV/√Hz. A 1 kΩ resistor contributes 4 nV/√Hz; therefore, placing a 1 kΩ resistor at the input increases total noise to 7.2 nV/√Hz. For this noise reason, it is recommended to avoid using large source resistance.

### Unity Gain Follower with Large Source Resistance

When the ADA4522-1/ADA4522-2/ADA4522-4 are configured in a unity-gain follower configuration with a large source resistance and slow power supply ramp rate, the amplifier output may rail to the positive supply.

![Figure 89.Insert RF When Large RS is Use](ada4522-2/figures/ada4522-2-f062.png)

*Figure 89.Insert RF When Large RS is Use*

### Workaround

To avoid the amplifier output railing to the positive supply, implement one of the following actions (see Table 11 and Figure 89):

- Reduce the value of the source resistance (R_{S}).
- Insert a feedback resistor (R_{F}).

**Table 11. Amplifier Output Railing Workaround Recommendations** ([table-10-p43-data.csv](ada4522-2/tables/table-10-p43-data.csv), p. 43)

| CONDITION | RECOMMENDATION |
|---|---|
| 1.5 V ≤ V_{SY} − V_{IN} < 2.5 V | R_{F} = 200 Ω or R_{F} ≥ 50 R_{S}, whichever is greater |
| 2.5 V ≤ V_{SY} − V_{IN} < 3.5 V | R_{S} ≤ 200 Ω or R_{F} ≥ 2 R_{S} |
| V_{SY} − V_{IN} ≥ 3.5 V | R_{S} ≤ 500 Ω or R_{F} ≥ 0.5 R_{S} |

### OUTLINE DIMENSIONS

![Figure 90.8-Lead Mini Small Outline Package (MSOP) (RM-8) Dimensions shown in millimeters](ada4522-2/figures/ada4522-2-f063.png)

*Figure 90.8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters*

![Figure 91.8-Lead Small Outline Package (SOIC_N) Narrow Body (R-8) Dimensions shown in millimeters and (inches)](ada4522-2/figures/ada4522-2-f064.png)

*Figure 91.8-Lead Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches)*

![Figure 92. 14-Lead Small Outline Package (SOIC\_N) Narrow Body (R-14) Dimensions shown in millimeters and (inches)](ada4522-2/figures/ada4522-2-f065.png)

*Figure 92.14-Lead Small Outline Package [SOIC\_N] Narrow Body (R-14) Dimensions shown in millimeters and (inches)*

![Figure 93.14-Lead Thin Shrink Small Outline Package (TSSOP) (RU-14) Dimensions shown in millimeters](ada4522-2/figures/ada4522-2-f066.png)

*Figure 93.14-Lead Thin Shrink Small Outline Package [TSSOP] (RU-14) Dimensions shown in millimeters*

### ORDERING GUIDE

**Table 12. Ordering Guide** ([table-11-p46-data.csv](ada4522-2/tables/table-11-p46-data.csv), p. 46)

| MODEL[^1][^2] | TEMPERATURE RANGE | PACKAGE DESCRIPTION | PACKING QUANTITY | PACKAGE OPTION | MARKING CODE |
|---|---|---|---|---|---|
| ADA4522-1ARMZ | -40°C to +125°C | 8-Lead MSOP | Tube, 50 | RM-8 | A3G |
| ADA4522-1ARMZ-R7 | -40°C to +125°C | 8-Lead MSOP | Reel, 1000 | RM-8 | A3G |
| ADA4522-1ARMZ-RL | -40°C to +125°C | 8-Lead MSOP | Reel, 3000 | RM-8 | A3G |
| ADA4522-1ARZ | -40°C to +125°C | 8-Lead SOIC | Tube, 98 | R-8 |  |
| ADA4522-1ARZ-R7 | -40°C to +125°C | 8-Lead SOIC | Reel, 1000 | R-8 |  |
| ADA4522-1ARZ-RL | -40°C to +125°C | 8-Lead SOIC | Reel, 2500 | R-8 |  |
| ADA4522-2ARMZ | -40°C to +125°C | 8-Lead MSOP | Tube, 50 | RM-8 | A39 |
| ADA4522-2ARMZ-R7 | -40°C to +125°C | 8-Lead MSOP | Reel, 1000 | RM-8 | A39 |
| ADA4522-2ARMZ-RL | -40°C to +125°C | 8-Lead MSOP | Reel, 3000 | RM-8 | A39 |
| ADA4522-2WARMZ | -40°C to +125°C | 8-Lead MSOP | Tube, 50 | RM-8 | A39 |
| ADA4522-2WARMZ-R7 | -40°C to +125°C | 8-Lead MSOP | Reel, 1000 | RM-8 | A39 |
| ADA4522-2WARMZ-RL | -40°C to +125°C | 8-Lead MSOP | Reel, 3000 | RM-8 | A39 |
| ADA4522-2ARZ | -40°C to +125°C | 8-Lead SOIC | Tube, 98 | R-8 |  |
| ADA4522-2ARZ-R7 | -40°C to +125°C | 8-Lead SOIC | Reel, 1000 | R-8 |  |
| ADA4522-2ARZ-RL | -40°C to +125°C | 8-Lead SOIC | Reel, 2500 | R-8 |  |
| ADA4522-4ARUZ | -40°C to +125°C | 14-Lead TSSOP | Tube, 96 | RU-14 |  |
| ADA4522-4ARUZ-R7 | -40°C to +125°C | 14-Lead TSSOP | Reel, 1000 | RU-14 |  |
| ADA4522-4ARUZ-RL | -40°C to +125°C | 14-Lead TSSOP | Reel, 2500 | RU-14 |  |
| ADA4522-4ARZ | -40°C to +125°C | 14-Lead SOIC | Tube, 56 | R-14 |  |
| ADA4522-4ARZ-R7 | -40°C to +125°C | 14-Lead SOIC | Reel, 1000 | R-14 |  |
| ADA4522-4ARZ-RL | -40°C to +125°C | 14-Lead SOIC | Reel, 2500 | R-14 |  |

- **Note 1:** Z = RoHS-Compliant Part
- **Note 2:** W = Qualified for Automotive Applications

### AUTOMOTIVE PRODUCTS

The  ADA4522-2W  models  are  available  with  controlled  manufacturing  to  support the quality  and  reliability requirements of automotive applications. Note that these automotive models may  have specifications that differ from  the  commercial  models;  therefore,  designers  should  review  the Specifications section  of  this  data  sheet carefully. Only the automotive-grade products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to  obtain the specific Automotive Reliability reports for these models.

### REVISION HISTORY

**Revision History** ([table-12-p47-data.csv](ada4522-2/tables/table-12-p47-data.csv), p. 47)

| REVISION NUMBER | REVISION DATE | DESCRIPTION | PAGES CHANGED |
|---|---|---|---|
| G | 2/2022 | Updated Figure 2 | 1 |
| G | 2/2022 | Updated Figure 60 to Figure 63 | 20 |
| G | 2/2022 | Updated Figure 76 | 25 |
| G | 2/2022 | Updated Ordering Guide section | 33 |
| H | 10/2024 | Updated Features and Applications sections | 1 |
| H | 10/2024 | Updated Ordering Guide section | 46 |
| H | 10/2024 | Added Automotive Products section | 46 |
| I | 3/2025 | Updated Table 2, Table 3, and Table 4 format | 5–13 |
| I | 3/2025 | Specify unit of Large Signal Voltage Gain in parameter title | 5, 8, 11 |
| I | 3/2025 | Add EMIRR equation on Table 2, Table 3, and Table 4 footnote | 7, 10, 13 |


ALL  INFORMATION  CONTAINED  HEREIN  IS  PROVIDED  "AS  IS"  WITHOUT  REPRESENTATION  OR  WARRANTY.  NO  RESPONSIBILITY  IS ASSUMED BY ANALOG DEVICES FOR ITS USE, NOR FOR ANY INFRINGEMENTS OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES THAT MAY  RESULT  FROM  ITS  USE.  SPECIFICATIONS  ARE  SUBJECT  TO  CHANGE  WITHOUT  NOTICE.  NO  LICENCE,  EITHER  EXPRESSED  OR IMPLIED, IS GRANTED UNDER ANY ADI PATENT RIGHT, COPYRIGHT, MASK WORK RIGHT, OR ANY OTHER ADI INTELLECTUAL PROPERTY RIGHT RELATING TO ANY COMBINATION, MACHINE, OR PROCESS, IN WHICH ADI PRODUCTS OR SERVICES ARE USED. TRADEMARKS AND REGISTERED TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. ALL ANALOG DEVICES PRODUCTS CONTAINED HEREIN ARE SUBJECT TO RELEASE AND AVAILABILITY.
