---
type: Analog Component
title: "AD9082 — MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC"
description: "MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC"
resource: "https://www.analog.com/en/products/ad9082.html"
tags: ["datasheet", "adi"]
status: draft
sources:
  - id: "datasheet"
    resource: "https://www.analog.com/media/en/technical-documentation/data-sheets/ad9082.pdf"
    title: "AD9082 data sheet"
    author: "team:analog-devices"
    last_modified: "6/21"
tables:
  - file: "ad9082/tables/table-00-p4-spec.csv"
    title: "Table 1."
    page: 4
  - file: "ad9082/tables/table-01-p4-spec.csv"
    title: "Table 2."
    page: 4
  - file: "ad9082/tables/table-02-p5-spec.csv"
    title: "Table 3. DAC DC Specifications"
    page: 5
  - file: "ad9082/tables/table-03-p5-spec.csv"
    title: "Table 4. ADC DC Specifications"
    page: 5
  - file: "ad9082/tables/table-04-p6-spec.csv"
    title: "Table 5. Clock Inputs and Outputs"
    page: 6
  - file: "ad9082/tables/table-05-p6-spec.csv"
    title: "Table 6. Clock Input and PLL Specifications"
    page: 6
  - file: "ad9082/tables/table-06-p7-spec.csv"
    title: "Table 7. DAC Sample Rate Specifications"
    page: 7
  - file: "ad9082/tables/table-07-p7-spec.csv"
    title: "Table 8. ADC Sample Rate Specifications"
    page: 7
  - file: "ad9082/tables/table-08-p8-spec.csv"
    title: "Table 9."
    page: 8
  - file: "ad9082/tables/table-09-p9-spec.csv"
    title: "Table 10."
    page: 9
  - file: "ad9082/tables/table-10-p10-spec.csv"
    title: "Table 11. Serial Interface Rate Specifications"
    page: 10
  - file: "ad9082/tables/table-11-p10-spec.csv"
    title: "Table 12. JESD204 Receiver (JRx) Electrical Specifications"
    page: 10
  - file: "ad9082/tables/table-12-p10-spec.csv"
    title: "Table 13. JESD204 Transmitter (JTx) Electrical Specifications"
    page: 10
  - file: "ad9082/tables/table-13-p10-spec.csv"
    title: "Table 14. SYSREF Electrical Specifications"
    page: 10
  - file: "ad9082/tables/table-14-p11-spec.csv"
    title: "Table 15."
    page: 11
  - file: "ad9082/tables/table-15-p11-spec.csv"
    title: "Table 16."
    page: 11
  - file: "ad9082/tables/table-16-p14-spec.csv"
    title: "Table 17."
    page: 14
  - file: "ad9082/tables/table-17-p16-spec.csv"
    title: "Table 18."
    page: 16
  - file: "ad9082/tables/table-18-p17-abs_max.csv"
    title: "Table 19."
    page: 17
  - file: "ad9082/tables/table-19-p17-data.csv"
    title: "Table 20. Simulated Thermal Resistance[^1]"
    page: 17
  - file: "ad9082/tables/table-20-p19-pin.csv"
    title: "Table 21. Pin Function Descriptions"
    page: 19
  - file: "ad9082/tables/table-21-p36-data.csv"
    title: "Ordering Guide"
    page: 36
figures:
  - file: "ad9082/figures/ad9082-f002-01.png"
    caption: "Figure 2. Timing Diagram for 3-Wire Write Operation"
    type: "timing_diagram"
    page: 16
  - file: "ad9082/figures/ad9082-f002-02.png"
    caption: "Figure 3. Timing Diagram for 3-Wire Read Operation"
    type: "timing_diagram"
    page: 16
  - file: "ad9082/figures/ad9082-f002-03.png"
    caption: "Figure 4. Timing Diagram for 4-Wire Read Operation"
    type: "timing_diagram"
    page: 16
  - file: "ad9082/figures/ad9082-eqx04.png"
    caption: "Equation as printed (p. 29)"
    type: equation
    page: 29
  - file: "ad9082/figures/ad9082-f001.png"
    caption: ""
    type: "block_diagram"
    page: 3
  - file: "ad9082/figures/ad9082-f007.png"
    caption: "Figure 6. HD2 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C"
    type: "characteristic_curve"
    page: 23
  - file: "ad9082/figures/ad9082-f008.png"
    caption: "Figure 7. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C"
    type: "characteristic_curve"
    page: 23
  - file: "ad9082/figures/ad9082-f009.png"
    caption: "Figure 8. HD3 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C"
    type: "characteristic_curve"
    page: 23
  - file: "ad9082/figures/ad9082-f010.png"
    caption: "Figure 9. HD2 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C"
    type: "characteristic_curve"
    page: 23
  - file: "ad9082/figures/ad9082-f011.png"
    caption: "Figure 10. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B"
    type: "characteristic_curve"
    page: 23
  - file: "ad9082/figures/ad9082-f012.png"
    caption: "Figure 11. HD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C"
    type: "characteristic_curve"
    page: 23
  - file: "ad9082/figures/ad9082-f013.png"
    caption: "Figure 12. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C"
    type: "characteristic_curve"
    page: 24
  - file: "ad9082/figures/ad9082-f014.png"
    caption: "Figure 13. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C"
    type: "characteristic_curve"
    page: 24
  - file: "ad9082/figures/ad9082-f015.png"
    caption: "Figure 14. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C"
    type: "characteristic_curve"
    page: 24
  - file: "ad9082/figures/ad9082-f016.png"
    caption: "Figure 15. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B"
    type: "characteristic_curve"
    page: 24
  - file: "ad9082/figures/ad9082-f017.png"
    caption: "Figure 16. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C"
    type: "characteristic_curve"
    page: 24
  - file: "ad9082/figures/ad9082-f018.png"
    caption: "Figure 17. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B"
    type: "characteristic_curve"
    page: 24
  - file: "ad9082/figures/ad9082-f019.png"
    caption: "Figure 18. IMD3 vs. f_{OUT} over Digital Scale (Mode 17B), 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C, IMD3 is a Two-Tone"
    type: "characteristic_curve"
    page: 25
  - file: "ad9082/figures/ad9082-f020.png"
    caption: "Figure 19. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C, IMD3 is a Two-Tone Test,"
    type: "characteristic_curve"
    page: 25
  - file: "ad9082/figures/ad9082-f021.png"
    caption: "Figure 20. IMD3 vs. f_{OUT} over f_{DAC}, Digital Scale -7 dBFS, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale"
    type: "characteristic_curve"
    page: 25
  - file: "ad9082/figures/ad9082-f022.png"
    caption: "Figure 21. IMD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C, IMD3 is a Two-Tone Test,"
    type: "characteristic_curve"
    page: 25
  - file: "ad9082/figures/ad9082-f023.png"
    caption: "Figure 22. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B, IMD3 is a Two-Tone Test,"
    type: "characteristic_curve"
    page: 25
  - file: "ad9082/figures/ad9082-f024.png"
    caption: "Figure 23. SFDR, Worst In-Band Spurious vs. f_{OUT} over f_{DAC}, with 0 dBFS Tone Level"
    type: "characteristic_curve"
    page: 25
  - file: "ad9082/figures/ad9082-f025.png"
    caption: "Figure 24. DAC0 Fundamental Output Power vs. f_{OUT} Across f_{DAC}, at 0 dBFS Digital Backoff, Measured on a Laboratory Evaluation Board, the AD9081-"
    type: "characteristic_curve"
    page: 26
  - file: "ad9082/figures/ad9082-f026.png"
    caption: "Figure 25. Single Sideband Phase Noise vs. Frequency Offset for Different Clock Input Power (P_{CLK}), f_{OUT} = 1.8 GHz, External 12 GHz Clock Input with Clock PLL Disabled"
    type: "characteristic_curve"
    page: 26
  - file: "ad9082/figures/ad9082-f027.png"
    caption: "Figure 26. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, Shuffle On, 16-Bit Resolution, Mode 15C"
    type: "characteristic_curve"
    page: 26
  - file: "ad9082/figures/ad9082-f028.png"
    caption: "Figure 27. Single Sideband Phase Noise vs. Frequency Offset for Different PLL"
    type: "characteristic_curve"
    page: 26
  - file: "ad9082/figures/ad9082-f029.png"
    caption: "Figure 28. Single Sideband Phase Noise vs. Frequency Offset for Different DAC Output Frequencies (f_{OUT}), External 12 GHz Clock Input with Clock PLL Disabled"
    type: "characteristic_curve"
    page: 26
  - file: "ad9082/figures/ad9082-f030.png"
    caption: "Figure 29. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, 12-Bit Resolution, Shuffle On, Mode 24C"
    type: "characteristic_curve"
    page: 26
  - file: "ad9082/figures/ad9082-f031.png"
    caption: "Figure 30. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 16-Bit Resolution, Mode 15C"
    type: "characteristic_curve"
    page: 27
  - file: "ad9082/figures/ad9082-f032.png"
    caption: "Figure 31. Dual Band ACLR Performance for Two 20 MHz LTE carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (Refer to Figure 32 for a Wideband Plot), Showing a Close Up of One Carrier at f_{OUT} = 1.88 GHz, f_{DAC} = 11.796 GSPS, Test Vector PAR = 7.7 dB with −1 dBFS Backoff, Channel Interpolation 3×, Main Interpolation 8×, Mode 9C"
    type: "scope_capture"
    page: 27
  - file: "ad9082/figures/ad9082-f033.png"
    caption: "Figure 32. Dual Band Wideband Plot for Two 20 MHz LTE Carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (3GPP Bands, B1 and B3, Respectively),"
    type: "scope_capture"
    page: 27
  - file: "ad9082/figures/ad9082-f034.png"
    caption: "Figure 33. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 12-Bit Resolution, Mode 24C"
    type: "characteristic_curve"
    page: 27
  - file: "ad9082/figures/ad9082-f035.png"
    caption: "Figure 34. Dual Band ACLR Performance for two 20 MHz LTE carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (Refer to Figure 32 for a Wideband Plot),"
    type: "scope_capture"
    page: 27
  - file: "ad9082/figures/ad9082-f036.png"
    caption: "Figure 35. ACLR Performance for 100 MHz 5G Test Vector at f_{OUT} = 3.9 GHz"
    type: "scope_capture"
    page: 27
  - file: "ad9082/figures/ad9082-f037.png"
    caption: "Figure 36. Single-Tone FFT at f_{IN} = 450 MHz"
    type: "characteristic_curve"
    page: 28
  - file: "ad9082/figures/ad9082-f038.png"
    caption: "Figure 37. Single-Tone FFT at f_{IN} = 900 MHz"
    type: "characteristic_curve"
    page: 28
  - file: "ad9082/figures/ad9082-f039.png"
    caption: "Figure 38. Single-Tone FFT at f_{IN} = 1.8 GHz"
    type: "characteristic_curve"
    page: 28
  - file: "ad9082/figures/ad9082-f040.png"
    caption: "Figure 39. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 450 MHz"
    type: "characteristic_curve"
    page: 28
  - file: "ad9082/figures/ad9082-f041.png"
    caption: "Figure 40. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 900 MHz"
    type: "characteristic_curve"
    page: 28
  - file: "ad9082/figures/ad9082-f042.png"
    caption: "Figure 41. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 1.8 GHz"
    type: "characteristic_curve"
    page: 28
  - file: "ad9082/figures/ad9082-f043.png"
    caption: "Figure 42. Single-Tone FFT at f_{IN} = 2.7 GHz"
    type: "characteristic_curve"
    page: 29
  - file: "ad9082/figures/ad9082-f044.png"
    caption: "Figure 43. Single-Tone FFT at f_{IN} = 3.6 GHz"
    type: "characteristic_curve"
    page: 29
  - file: "ad9082/figures/ad9082-f045.png"
    caption: "Figure 44. Single-Tone FFT at f_{IN} = 4.5 GHz"
    type: "characteristic_curve"
    page: 29
  - file: "ad9082/figures/ad9082-f046.png"
    caption: "Figure 45. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 2.7 GHz"
    type: "characteristic_curve"
    page: 29
  - file: "ad9082/figures/ad9082-f047.png"
    caption: "Figure 46. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 3.6 GHz"
    type: "characteristic_curve"
    page: 29
  - file: "ad9082/figures/ad9082-f048.png"
    caption: "Figure 47. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 4.5 GHz"
    type: "characteristic_curve"
    page: 29
  - file: "ad9082/figures/ad9082-f049.png"
    caption: "Figure 48. Single-Tone FFT at f_{IN} = 5.4 GHz"
    type: "characteristic_curve"
    page: 30
  - file: "ad9082/figures/ad9082-f050.png"
    caption: "Figure 49. Single-Tone FFT at f_{IN} = 6.3 GHz"
    type: "characteristic_curve"
    page: 30
  - file: "ad9082/figures/ad9082-f051.png"
    caption: "Figure 50. Single-Tone FFT at f_{IN} = 7.2 GHz"
    type: "characteristic_curve"
    page: 30
  - file: "ad9082/figures/ad9082-f052.png"
    caption: "Figure 51. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 5.4 GHz"
    type: "characteristic_curve"
    page: 30
  - file: "ad9082/figures/ad9082-f053.png"
    caption: "Figure 52. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 6.3 GHz"
    type: "characteristic_curve"
    page: 30
  - file: "ad9082/figures/ad9082-f054.png"
    caption: "Figure 53. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 7.2 GHz"
    type: "characteristic_curve"
    page: 30
  - file: "ad9082/figures/ad9082-f055.png"
    caption: "Figure 54. Two-Tone FFT, f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz, and A_{IN1} and A_{IN2} = -7 dBFS (Note That IMD3L and IMD3H Are the Lower and Higher IMD3 Product Components in dBFS)"
    type: "characteristic_curve"
    page: 31
  - file: "ad9082/figures/ad9082-f056.png"
    caption: "Figure 55. Two-Tone FFT, f_{IN1} = 2.675 GHz, f_{IN2} = 2.725 GHz, and A_{IN1} and A_{IN2} = -7 dBFS"
    type: "characteristic_curve"
    page: 31
  - file: "ad9082/figures/ad9082-f057.png"
    caption: "Figure 56. Two-Tone FFT, f_{IN1} = 3.575 GHz, f_{IN2} = 3.625 GHz, and A_{IN1} and A_{IN2} = -7 dBFS"
    type: "characteristic_curve"
    page: 31
  - file: "ad9082/figures/ad9082-f058.png"
    caption: "Figure 57. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz"
    type: "characteristic_curve"
    page: 31
  - file: "ad9082/figures/ad9082-f059.png"
    caption: "Figure 58. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 2.675 GHz and f_{IN2} = 2.725 GHz"
    type: "characteristic_curve"
    page: 31
  - file: "ad9082/figures/ad9082-f060.png"
    caption: "Figure 59. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 3.575 GHz and f_{IN2} = 3.625 GHz"
    type: "characteristic_curve"
    page: 31
  - file: "ad9082/figures/ad9082-f061.png"
    caption: "Figure 60. Two-Tone FFT, f_{IN1} = 5.375 GHz, f_{IN2} = 5.425 GHz, and A_{IN1} and A_{IN2} = -7 dBFS"
    type: "characteristic_curve"
    page: 32
  - file: "ad9082/figures/ad9082-f062.png"
    caption: "Figure 61. SNR vs. Frequency with A_{IN} =-1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz"
    type: "characteristic_curve"
    page: 32
  - file: "ad9082/figures/ad9082-f063.png"
    caption: "Figure 62. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS"
    type: "characteristic_curve"
    page: 32
  - file: "ad9082/figures/ad9082-f064.png"
    caption: "Figure 63. Two-Tone IMD3 vs. Input Amplitude with f_{IN1} = 5.375 GHz and f_{IN2} = 5.425 GHz"
    type: "characteristic_curve"
    page: 32
  - file: "ad9082/figures/ad9082-f065.png"
    caption: "Figure 64. SFDR vs. Frequency with A_{IN} = -1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz"
    type: "characteristic_curve"
    page: 32
  - file: "ad9082/figures/ad9082-f066.png"
    caption: "Figure 65. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -9 dBFS"
    type: "characteristic_curve"
    page: 32
  - file: "ad9082/figures/ad9082-f067.png"
    caption: "Figure 66. SNR vs. Frequency with A_{IN} = -1 dBFS"
    type: "characteristic_curve"
    page: 33
  - file: "ad9082/figures/ad9082-f068.png"
    caption: "Figure 67. SNR vs. Frequency with A_{IN} = -1 dBFS with DAC On/Off and PLL On/Off Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz"
    type: "characteristic_curve"
    page: 33
  - file: "ad9082/figures/ad9082-f069.png"
    caption: "Figure 68. Measured ADC Input Bandwidth on the AD9082-FMCA-EBZ (No Matching Network)"
    type: "characteristic_curve"
    page: 33
  - file: "ad9082/figures/ad9082-f070.png"
    caption: "Figure 69. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS"
    type: "characteristic_curve"
    page: 33
  - file: "ad9082/figures/ad9082-f071.png"
    caption: "Figure 70. HD2 and HD3 vs. Sample Frequency (f_{S}), f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    type: "characteristic_curve"
    page: 33
  - file: "ad9082/figures/ad9082-f072.png"
    caption: "Figure 71. SNR and SFDR vs. Sample Frequency, f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    type: "characteristic_curve"
    page: 33
  - file: "ad9082/figures/ad9082-f073.png"
    caption: "Figure 72. SFDR and SNR vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS"
    type: "thermal"
    page: 34
  - file: "ad9082/figures/ad9082-f074.png"
    caption: "Figure 73. Power vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS"
    type: "thermal"
    page: 34
  - file: "ad9082/figures/ad9082-f075.png"
    caption: "Figure 74. HD2 and HD3 vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    type: "characteristic_curve"
    page: 34
  - file: "ad9082/figures/ad9082-f076.png"
    caption: "Figure 75. Harmonics vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS"
    type: "thermal"
    page: 34
  - file: "ad9082/figures/ad9082-f077.png"
    caption: "Figure 76. SNR and SFDR vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    type: "characteristic_curve"
    page: 34
  - file: "ad9082/figures/ad9082-f078.png"
    caption: "Figure 77. Input Referred Noise Histogram"
    type: "characteristic_curve"
    page: 34
  - file: "ad9082/figures/ad9082-f079.png"
    caption: "Figure 78. 324-Ball Ball Grid Array, Thermally Enhanced [BGA_ED] (BP-324-3)"
    type: "other"
    page: 36
curves:
  - file: "ad9082/curves/dac0-fundamental-output-power-vs-fout-across-fdac-at-0-dbfs-digital-backoff-meas.csv"
    caption: "Figure 24. DAC0 Fundamental Output Power vs. f_{OUT} Across f_{DAC}, at 0 dBFS Digital Backoff, Measured on a Laboratory Evaluation Board, the AD9081-"
    figure: "ad9082/figures/ad9082-f025.png"
    page: 26
    x_unit: "MHz"
    y_unit: "dBm"
    conditions: "f_{DAC} = 2949.12MSPS, f_{DAC} = 5898.24MSPS, f_{DAC} = 8847.36MSPS, f_{DAC} = 11796.48MSPS"
  - file: "ad9082/curves/harmonics-hd2-and-hd3-vs-frequency-with-ain-1-dbfs.csv"
    caption: "Figure 69. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS"
    figure: "ad9082/figures/ad9082-f070.png"
    page: 33
    x_unit: "MHz"
    y_unit: "dBFS"
    conditions: "A_{IN} = -1 dBFS"
  - file: "ad9082/curves/harmonics-hd2-and-hd3-vs-frequency-with-ain-9-dbfs.csv"
    caption: "Figure 65. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -9 dBFS"
    figure: "ad9082/figures/ad9082-f066.png"
    page: 32
  - file: "ad9082/curves/harmonics-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv"
    caption: "Figure 75. Harmonics vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS"
    figure: "ad9082/figures/ad9082-f076.png"
    page: 34
    x_unit: "°C"
    y_unit: "dBFS"
  - file: "ad9082/curves/hd2-and-hd3-vs-sample-frequency-fin-3450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv"
    caption: "Figure 74. HD2 and HD3 vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    figure: "ad9082/figures/ad9082-f075.png"
    page: 34
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/hd2-and-hd3-vs-sample-frequency-fs-fin-450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv"
    caption: "Figure 70. HD2 and HD3 vs. Sample Frequency (f_{S}), f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    figure: "ad9082/figures/ad9082-f071.png"
    page: 33
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/hd2-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-m.csv"
    caption: "Figure 7. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C"
    figure: "ad9082/figures/ad9082-f008.png"
    page: 23
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd2-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-m.csv"
    caption: "Figure 10. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B"
    figure: "ad9082/figures/ad9082-f011.png"
    page: 23
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd2-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-interpolation-1-ma.csv"
    caption: "Figure 6. HD2 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C"
    figure: "ad9082/figures/ad9082-f007.png"
    page: 23
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd2-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-ma.csv"
    caption: "Figure 9. HD2 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C"
    figure: "ad9082/figures/ad9082-f010.png"
    page: 23
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-m.csv"
    caption: "Figure 12. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C"
    figure: "ad9082/figures/ad9082-f013.png"
    page: 24
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-m.csv"
    caption: "Figure 15. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B"
    figure: "ad9082/figures/ad9082-f016.png"
    page: 24
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd3-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-interpolation-1-ma.csv"
    caption: "Figure 8. HD3 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C"
    figure: "ad9082/figures/ad9082-f009.png"
    page: 23
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/hd3-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-ma.csv"
    caption: "Figure 11. HD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C"
    figure: "ad9082/figures/ad9082-f012.png"
    page: 23
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/imd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-.csv"
    caption: "Figure 19. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C, IMD3 is a Two-Tone Test,"
    figure: "ad9082/figures/ad9082-f020.png"
    page: 25
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/imd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-.csv"
    caption: "Figure 22. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B, IMD3 is a Two-Tone Test,"
    figure: "ad9082/figures/ad9082-f023.png"
    page: 25
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/imd3-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-m.csv"
    caption: "Figure 21. IMD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C, IMD3 is a Two-Tone Test,"
    figure: "ad9082/figures/ad9082-f022.png"
    page: 25
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/imd3-vs-fout-over-digital-scale-mode-17b-6-gsps-dac-sample-rate-channel-interpol.csv"
    caption: "Figure 18. IMD3 vs. f_{OUT} over Digital Scale (Mode 17B), 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C, IMD3 is a Two-Tone"
    figure: "ad9082/figures/ad9082-f019.png"
    page: 25
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/imd3-vs-fout-over-fdac-digital-scale-7-dbfs-imd3-is-a-two-tone-test-and-the-scal.csv"
    caption: "Figure 20. IMD3 vs. f_{OUT} over f_{DAC}, Digital Scale -7 dBFS, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale"
    figure: "ad9082/figures/ad9082-f021.png"
    page: 25
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/measured-adc-input-bandwidth-on-the-ad9082-fmca-ebz-no-matching-network.csv"
    caption: "Figure 68. Measured ADC Input Bandwidth on the AD9082-FMCA-EBZ (No Matching Network)"
    figure: "ad9082/figures/ad9082-f069.png"
    page: 33
    x_unit: "GHz"
    y_unit: "dB"
  - file: "ad9082/curves/power-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv"
    caption: "Figure 73. Power vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS"
    figure: "ad9082/figures/ad9082-f074.png"
    page: 34
    x_unit: "°C"
    y_unit: "A"
  - file: "ad9082/curves/sfdr-and-snr-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv"
    caption: "Figure 72. SFDR and SNR vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS"
    figure: "ad9082/figures/ad9082-f073.png"
    page: 34
    x_unit: "°C"
    y_unit: "dBFS"
  - file: "ad9082/curves/sfdr-vs-frequency-with-ain-1-dbfs-between-direct-external-rf-clock-6-ghz-and-pll.csv"
    caption: "Figure 64. SFDR vs. Frequency with A_{IN} = -1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz"
    figure: "ad9082/figures/ad9082-f065.png"
    page: 32
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/sfdr-worst-in-band-spurious-vs-fout-over-fdac-with-0-dbfs-tone-level.csv"
    caption: "Figure 23. SFDR, Worst In-Band Spurious vs. f_{OUT} over f_{DAC}, with 0 dBFS Tone Level"
    figure: "ad9082/figures/ad9082-f024.png"
    page: 25
    x_unit: "MHz"
    y_unit: "dBc"
    conditions: "0 dBFS tone level"
  - file: "ad9082/curves/sfdr-worst-spurious-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-i.csv"
    caption: "Figure 17. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B"
    figure: "ad9082/figures/ad9082-f018.png"
    page: 24
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/sfdr-worst-spurious-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-in.csv"
    caption: "Figure 13. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C"
    figure: "ad9082/figures/ad9082-f014.png"
    page: 24
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/sfdr-worst-spurious-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-in.csv"
    caption: "Figure 16. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C"
    figure: "ad9082/figures/ad9082-f017.png"
    page: 24
    x_unit: "MHz"
    y_unit: "dBc"
  - file: "ad9082/curves/single-sideband-phase-noise-vs-frequency-offset-for-different-clock-input-power-.csv"
    caption: "Figure 25. Single Sideband Phase Noise vs. Frequency Offset for Different Clock Input Power (P_{CLK}), f_{OUT} = 1.8 GHz, External 12 GHz Clock Input with Clock PLL Disabled"
    figure: "ad9082/figures/ad9082-f026.png"
    page: 26
    x_unit: "Hz"
    y_unit: "dBc/Hz"
  - file: "ad9082/curves/single-sideband-phase-noise-vs-frequency-offset-for-different-dac-output-frequen.csv"
    caption: "Figure 28. Single Sideband Phase Noise vs. Frequency Offset for Different DAC Output Frequencies (f_{OUT}), External 12 GHz Clock Input with Clock PLL Disabled"
    figure: "ad9082/figures/ad9082-f029.png"
    page: 26
    x_unit: "Hz"
    y_unit: "dBc/Hz"
  - file: "ad9082/curves/single-sideband-phase-noise-vs-frequency-offset-for-different-pll.csv"
    caption: "Figure 27. Single Sideband Phase Noise vs. Frequency Offset for Different PLL"
    figure: "ad9082/figures/ad9082-f028.png"
    page: 26
    x_unit: "Hz"
    y_unit: "dBc/Hz"
  - file: "ad9082/curves/single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-over-fdac-12-bit-resolut.csv"
    caption: "Figure 29. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, 12-Bit Resolution, Shuffle On, Mode 24C"
    figure: "ad9082/figures/ad9082-f030.png"
    page: 26
    x_unit: "MHz"
    y_unit: "dBc/Hz"
    conditions: "f_{DAC} = 11796.48MSPS, f_{DAC} = 8847.36MSPS, f_{DAC} = 5898.24MSPS"
  - file: "ad9082/curves/single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-over-fdac-shuffle-on-16-.csv"
    caption: "Figure 26. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, Shuffle On, 16-Bit Resolution, Mode 15C"
    figure: "ad9082/figures/ad9082-f027.png"
    page: 26
    x_unit: "MHz"
    y_unit: "dBc/Hz"
    conditions: "f_{DAC} = 11796.48MSPS, f_{DAC} = 8847.36MSPS, f_{DAC} = 5898.24MSPS"
  - file: "ad9082/curves/single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-shuffle-off-vs-shuffle-o.csv"
    caption: "Figure 33. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 12-Bit Resolution, Mode 24C"
    figure: "ad9082/figures/ad9082-f034.png"
    page: 27
    x_unit: "MHz"
    y_unit: "dBc/Hz"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-1-8-ghz.csv"
    caption: "Figure 41. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 1.8 GHz"
    figure: "ad9082/figures/ad9082-f042.png"
    page: 28
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
    conditions: "f_{IN} = 1.8 GHz"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-2-7-ghz.csv"
    caption: "Figure 45. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 2.7 GHz"
    figure: "ad9082/figures/ad9082-f046.png"
    page: 29
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
    conditions: "f_{IN} = 2.7 GHz"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-3-6-ghz.csv"
    caption: "Figure 46. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 3.6 GHz"
    figure: "ad9082/figures/ad9082-f047.png"
    page: 29
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-4-5-ghz.csv"
    caption: "Figure 47. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 4.5 GHz"
    figure: "ad9082/figures/ad9082-f048.png"
    page: 29
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-450-mhz.csv"
    caption: "Figure 39. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 450 MHz"
    figure: "ad9082/figures/ad9082-f040.png"
    page: 28
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
    conditions: "f_{IN} = 450 MHz"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-5-4-ghz.csv"
    caption: "Figure 51. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 5.4 GHz"
    figure: "ad9082/figures/ad9082-f052.png"
    page: 30
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-6-3-ghz.csv"
    caption: "Figure 52. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 6.3 GHz"
    figure: "ad9082/figures/ad9082-f053.png"
    page: 30
    x_unit: "dBFS"
    y_unit: "dBc and dBFS"
    conditions: "f_{IN} = 6.3 GHz"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-7-2-ghz.csv"
    caption: "Figure 53. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 7.2 GHz"
    figure: "ad9082/figures/ad9082-f054.png"
    page: 30
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
    conditions: "f_{IN} = 7.2 GHz"
  - file: "ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-900-mhz.csv"
    caption: "Figure 40. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 900 MHz"
    figure: "ad9082/figures/ad9082-f041.png"
    page: 28
    x_unit: "dBFS"
    y_unit: "dBc AND dBFS"
  - file: "ad9082/curves/snr-and-sfdr-vs-sample-frequency-fin-3450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv"
    caption: "Figure 76. SNR and SFDR vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    figure: "ad9082/figures/ad9082-f077.png"
    page: 34
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/snr-and-sfdr-vs-sample-frequency-fin-450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv"
    caption: "Figure 71. SNR and SFDR vs. Sample Frequency, f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS"
    figure: "ad9082/figures/ad9082-f072.png"
    page: 33
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/snr-vs-frequency-with-ain-1-dbfs.csv"
    caption: "Figure 66. SNR vs. Frequency with A_{IN} = -1 dBFS"
    figure: "ad9082/figures/ad9082-f067.png"
    page: 33
    x_unit: "MHz"
    y_unit: "dBFS"
    conditions: "A_{IN} = -1 dBFS"
  - file: "ad9082/curves/snr-vs-frequency-with-ain-1-dbfs-between-direct-external-rf-clock-6-ghz-and-pll-.csv"
    caption: "Figure 61. SNR vs. Frequency with A_{IN} =-1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz"
    figure: "ad9082/figures/ad9082-f062.png"
    page: 32
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/snr-vs-frequency-with-ain-1-dbfs-with-dac-on-off-and-pll-on-off-between-direct-e.csv"
    caption: "Figure 67. SNR vs. Frequency with A_{IN} = -1 dBFS with DAC On/Off and PLL On/Off Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz"
    figure: "ad9082/figures/ad9082-f068.png"
    page: 33
    x_unit: "MHz"
    y_unit: "dBFS"
  - file: "ad9082/curves/two-tone-imd3-vs-ain-with-fin1-1-775-ghz-fin2-1-825-ghz.csv"
    caption: "Figure 57. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz"
    figure: "ad9082/figures/ad9082-f058.png"
    page: 31
    x_unit: "dBFS"
    y_unit: "dBFS"
  - file: "ad9082/curves/two-tone-imd3-vs-ain-with-fin1-2-675-ghz-and-fin2-2-725-ghz.csv"
    caption: "Figure 58. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 2.675 GHz and f_{IN2} = 2.725 GHz"
    figure: "ad9082/figures/ad9082-f059.png"
    page: 31
    x_unit: "dBFS"
    y_unit: "dBFS"
  - file: "ad9082/curves/two-tone-imd3-vs-ain-with-fin1-3-575-ghz-and-fin2-3-625-ghz.csv"
    caption: "Figure 59. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 3.575 GHz and f_{IN2} = 3.625 GHz"
    figure: "ad9082/figures/ad9082-f060.png"
    page: 31
    x_unit: "dBFS"
    y_unit: "dBFS"
  - file: "ad9082/curves/two-tone-imd3-vs-input-amplitude-with-fin1-5-375-ghz-and-fin2-5-425-ghz.csv"
    caption: "Figure 63. Two-Tone IMD3 vs. Input Amplitude with f_{IN1} = 5.375 GHz and f_{IN2} = 5.425 GHz"
    figure: "ad9082/figures/ad9082-f064.png"
    page: 32
    x_unit: "dBFS"
    y_unit: "dBFS"
agentforge:
  part_number: "AD9082"
  datasheet_revision: "C"
  repairs: 9
  reading_order: "structure-tree"
---

# AD9082 — MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC

*Datasheet: [AD9082 data sheet (PDF)](https://www.analog.com/media/en/technical-documentation/data-sheets/ad9082.pdf)*

### FEATURES

- Flexible reconfigurable common platform design
  - 4 DACs and 2 ADCs (4D2A) and 2D2A options
  - Supports single, dual, and quad band
  - Datapaths and DSP blocks are fully bypassable
  - DAC to ADC sample rate ratios of 1, 2, 3, and 4
  - On-chip PLL with multichip synchronization
  - External RFCLK input option for off-chip PLL
- Maximum DAC sample rate up to 12 GSPS
  - Maximum data rate up to 12 GSPS using JESD204C
  - Useable analog bandwidth to 8 GHz
- Maximum ADC sample rate up to 6 GSPS
  - Maximum data rate up to 6 GSPS using JESD204C
  - Useable analog bandwidth to 8 GHz
- ADC ac performance at 6 GSPS, input at 2.7 GHz, −1 dBFS
  - Full-scale input voltage: 1.475 V p-p
  - Noise density: −147.5 dBFS/Hz
  - Noise figure: 25.3 dB
  - HD2: −72 dBFS
  - HD3: −68 dBFS
  - Worst other (excluding HD2 and HD3): −78 dBFS
- DAC ac performance at 12 GSPS, output at 2.6 GHz
  - Full-scale output current range: 6.43 mA to 37.75 mA
  - Two-tone IMD3 (−6 dBFS per tone): −72 dBc
  - NSD, single-tone: −160 dBc/Hz
  - SFDR, single-tone: 75 dBc
- Versatile digital features
  - Selectable interpolation and decimation filters
  - Configurable DDC and DUC
    - 8 fine complex DUCs and 4 coarse complex DUCs
    - 8 fine complex DDCs and 4 coarse complex DDCs
    - 48-bit NCO per DUC or DDC
    - Option to bypass fine and coarse DUC/DDC
  - Programmable 192-tap PFIR filter for receive equalization
  - Supports 4 different profile settings loaded via GPIO
  - Programable delay per data path
  - Receive AGC support
    - Fast detect with low latency for fast AGC control
  - Signal monitor for slow AGC control
  - Dedicated AGC support pins
  - Transmit DPD support
    - Fine DUC channel gain control and delay adjust
    - Coarse DDC delay adjust for DPD observation path
  - Auxiliary features
    - Fast frequency hopping
    - Direct digital synthesis (DDS)
    - Low latency loopback modes (receive datapath data can be routed to the transmit datapaths)
    - ADC clock driver with selectable divide ratios
    - Power amplifier downstream protection circuitry
    - On-chip temperature monitoring unit
    - Flexible GPIO pins
    - TDD power savings option
  - SERDES JESD204B/C interface, 16 lanes up to 24.75 Gbps
    - 8 lanes JESD204B/C transmitter (JTx) and 8 lanes
    - JESD204B/C receiver (JRx)
    - JESD204B compliance with the maximum 15.5 Gbps
    - JESD204C compliance with the maximum 24.75 Gbps
    - Supports real or complex digital data (8-, 12-, 16-, or 24-bit)
  - 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

### APPLICATIONS

- Wireless communications infrastructure
- Microwave point to point, E-band, and 5G mmWave
- Broadband communications systems
- DOCSIS 3.1 and 4.0 CMTS
- Phased array radar and electronic warfare
- Electronic test and measurement systems

### GENERAL DESCRIPTION

The AD9082 mixed signal front-end (MxFE®) is a highly integrated device with four 16-bit, 12 GSPS maximum sample rate, RF digitalto-analog converter (DAC) cores, and two 12-bit, 6 GSPS maximum sample rate, RF analog-to-digital converter (ADC) cores. The AD9082 is well suited for applications requiring both wideband ADCs and DACs to process signal(s) that have wide instantaneous bandwidth. The device features eight transmit lanes and eight receive lanes that support 24.75 Gbps/lane JESD204C or 15.5 Gbps/lane JESD204B standards. The device also has an onchip clock multiplier and digital signal processing (DSP) capability targeted at either wideband or multiband, direct to RF applications. The DSP datapaths can be bypassed to allow a direct connection between the converter cores and the JESD204B/C data transceiver port. The device also features low latency loopback, frequency hopping modes, and datapath multiplexer (mux) configurations useful for phase array radar system and electronic warfare applications. Two models for the AD9082 are offered. The 4D2AC model supports four DACs and two ADCs. The 2D2AC model supports two DACs and two ADCs. See the Ordering Guide for more information.

### TABLE OF CONTENTS

- Features...1
- Applications...1
- General Description...1
- Revision History...2
- Functional Block Diagram...3
- Specifications...4
  - Recommended Operating Conditions...4
  - Power Consumption...4
  - DAC DC Specifications...5
  - ADC DC Specifications...5
  - Clock Inputs and Outputs...6
  - Clock Input and Phase-Locked Loop (PLL) Frequency Specifications...6
  - DAC Sample Rate Specifications...7
  - ADC Sample Rate Specifications...7
  - Input and Output Data Rate Specifications...8
  - NCO Frequency Specifications...9
  - JESD204B and JESD204C Interface Electrical and Speed Specifications...10
  - CMOS Pin Specifications...11
  - DAC AC Specifications...11
  - ADC AC Specifications...14
  - Timing Specifications...16
- Absolute Maximum Ratings...17
  - Thermal Resistance...17
  - ESD Caution...17
- Pin Configuration and Function Descriptions...18
- Typical Performance Characteristics...23
  - DAC...23
  - ADC...28
- Theory of Operation...35
- Outline Dimensions...36
  - Ordering Guide...36

### REVISION HISTORY

### 6/2021-Rev. B to Rev. C 

- Changes to Table 20...17

### 3/2021-Rev. A to Rev. B

- Changes to Features Section and General Description Section...1
- Changes to Figure 1...3
- Changes to Specifications Section...4
- Deleted DC Specifications Section and Table 2; Renumbered Sequentially...4
- Added DAC DC Specifications Section, Table 3, ADC DC Specifications Section, and Table 4; Renumbered Sequentially...5
- Deleted DAC and ADC Sampling Specifications Section...5
- Added Clock Inputs and Outputs Section and Table 5...6
- Added DAC Sample Rate Specifications Section, Table 7, ADC Sample Rate Specifications Section, and Table 8...7
- Deleted Table 6...7
- Added Table 9...8
- Deleted Table 7...8
- Added NCO Frequency Specifications Section and Table 10...9
- Added Table 11 and Table 12...9
- Added Table 13 and Table 14...10
- Changes to Table 19 and Table 20...17
- Changes to Table 21...19
- Changes to Pin Configuration and Function Descriptions Section and Figure 5...18
- Changes to Typical Performance Characteristics Section...23
- Changes to Theory of Operation Section...35
- Changes to Ordering Guide...36

### 9/2020-Rev. 0 to Rev. A

- Changes to Figure 1...3
- Changes to Figure 5...16
- Changes to Table 14...17

### 6/2020-Revision 0: Initial Version

### FUNCTIONAL BLOCK DIAGRAM

![block diagram (p. 3)](ad9082/figures/ad9082-f001.png)

Figure 1.

### SPECIFICATIONS

### RECOMMENDED OPERATING CONDITIONS

Successful DAC calibration is required during the device initialization phase that occurs shortly after power-up to ensure long-term reliability of the DAC core circuitry. Refer to the UG-1578 user guide for more information on device initialization.

**Table 1.** ([table-00-p4-spec.csv](ad9082/tables/table-00-p4-spec.csv), p. 4)

| PARAMETER | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|
| OPERATING JUNCTION TEMPERATURE (T_{J}) | −40 |  | 120 | °C |
| **ANALOG SUPPLY VOLTAGE RANGE** |  |  |  |  |
| AVDD2, BVDD2, RVDD2 | 1.9 | 2.0 | 2.1 | V |
| AVDD1, AVDD1_ADC, CLKVDD1, FVDD1, VDD1_NVG1 | 0.95 | 1.0 | 1.05 | V |
| **DIGITAL SUPPLY VOLTAGE RANGE** |  |  |  |  |
| DVDD1, DVDD1_RT, DCLKVDD1, DAVDD1 | 0.95 | 1.0 | 1.05 | V |
| DVDD1P8 | 1.7 | 1.8 | 2.1 | V |
| **SERIALIZER/DESERIALIZER (SERDES) SUPPLY VOLTAGE RANGE** |  |  |  |  |
| SVDD2_PLL | 1.9 | 2.0 | 2.1 | V |
| SVDD1, SVDD1_PLL | 0.95 | 1.0 | 1.05 | V |

### POWER CONSUMPTION

Typical at nominal supplies and maximum at 5% supplies. For the minimum and maximum values, T_{J} was varied between -40°C and +120°C. For the typical values, T_{A} = 25°C, unless otherwise noted.

DAC datapath with two DAC channels enabled. Complex I/Q data rate frequency (f_{IQ_DATA}) = 3000 MSPS, interpolation of 4×, DAC frequency (f_{DAC}) = 12 GSPS, and JESD204C mode of 15C (L = 8, M = 4, F = 1, S = 1, K = 128, E = 1, N = 16, NP = 16).

ADC datapath with two ADC channels enabled. ADC frequency (f_{ADC}) = 6 GSPS , decimation filters bypassed, and JESD204C mode of 19C (L = 8, M = 2, F = 1, S = 2, K = 256, E = 1, N = 16, NP = 16).

See the UG-1578 user guide for further information on the JESD204B and JESD204C mode configurations and a detailed description of the settings referenced throughout this data sheet.

**Table 2.** ([table-01-p4-spec.csv](ad9082/tables/table-01-p4-spec.csv), p. 4)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **CURRENTS** |  |  |  |  |  |
| AVDD2 (I_{AVDD2}) | 2.0 V supply |  | 105 | 110 | mA |
| BVDD2 (I_{BVDD2}) + RVDD2 (I_{RVDD2}) | 2.0 V supply |  | 290 | 340 | mA |
| AVDD2_PLL (I_{AVDD2_PLL}) + SVDD2_PLL (I_{SVDD2_PLL}) | 2.0 V supply |  | 45 | 55 | mA |
| Power Dissipation for 2 V Supplies | 2.0 V supply total power dissipation |  | 0.9 | 1.0 | W |
| PLLCLKVDD1 (I_{PLLCLKVDD1}) | 1.0 V supply |  | 15 | 25 | mA |
| AVDD1 (I_{AVDD1}) + DCLKVDD1 (I_{DCLKVDD1}) | 1.0 V supply |  | 620 | 795 | mA |
| AVDD1_ADC (I_{AVDD1_ADC}) | 1.0 V supply |  | 1710 | 2095 | mA |
| CLKVDD1 (I_{CLKVDD1}) | 1.0 V supply |  | 90 | 150 | mA |
| FVDD1 (I_{FVDD1}) | 1.0 V supply |  | 45 | 80 | mA |
| VDD1_NVG (I_{VDD1_NVG}) | 1.0 V supply |  | 280 | 360 | mA |
| DAVDD1 (I_{DAVDD1}) | 1.0 V supply |  | 925 | 1130 | mA |
| DVDD1 (I_{DVDD1}) | 1.0 V supply |  | 2175 | 3175 | mA |
| DVDD1_RT (I_{DVDD1_RT}) | 1.0 V supply |  | 560 | 680 | mA |
| SVDD1 (I_{SVDD1}) + SVDD1_PLL (I_{SVDD1_PLL}) | 1.0 V supply |  | 1850 | 2500 | mA |
| Power Dissipation for 1 V Supplies | 1.0 V supply total power dissipation |  | 8.3 | 11.0 | W |
| DVDD1P8 (I_{DVDD1P8}) | 1.8 V supply |  | 7 | 10 | mA |
| Total Power Dissipation | Total power dissipation of 2 V and 1 V supplies |  | 9.2 | 12 | W |

### DAC DC SPECIFICATIONS

Nominal supplies with DAC output full-scale current (I_{OUTFS}) = 26 mA, unless otherwise noted. ADC setup in 6 GSPS, full bandwidth mode (all digital downconverters bypassed). For the minimum and maximum values, T_{J} = -40°C to +120°C, and for the typical values, T_{A} = 25°C, which corresponds to T_{J} = 80°C, unless otherwise noted.

### Table 3. DAC DC Specifications

**Table 3. DAC DC Specifications** ([table-02-p5-spec.csv](ad9082/tables/table-02-p5-spec.csv), p. 5)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| DAC RESOLUTION |  | 16 |  |  | Bit |
| **DAC ACCURACY** |  |  |  |  |  |
| Gain Error |  |  | 1.5 |  | % FSR |
| Gain Matching |  |  | 0.7 |  | % FSR |
| Integral Nonlinearity (INL) | Shuffling disabled |  | 8.0 |  | LSB |
| Differential Nonlinearity (DNL) | Shuffling disabled |  | 3.5 |  | LSB |
| **DAC ANALOG OUTPUTS** | DACxP and DACxN |  |  |  |  |
| **Full-Scale Output Current Range** | AC coupling, setting resistance (R_{SET}) = 5 kΩ |  |  |  |  |
| AC Coupling | Output common-mode voltage (V_{CM}) = 0 V | 6.43 | 26.5 | 37.75 | mA |
| DC Coupling | 50 Ω shunt to a negative supply, forcing V_{CM} = 0 V | 6.43 |  | 37.75 | mA |
| DC Coupling | 50 Ω shunt to GND, forcing V_{CM} = 0.3 V | 6.43 |  | 20[^1] | mA |
| **Full-Scale Sine Wave Output Power with AC Coupling[^2]** | Ideal 2:1 balun interface to 50 Ω |  |  |  |  |
| I_{OUTFS} = 26.5 mA |  |  | 3.3 |  | dBm |
| I_{OUTFS} = 37.75 mA |  |  | 7 |  | dBm |
| Common-Mode Output Voltage (VCM_{OUT}) |  |  | 0 |  | V |
| AC Coupling | Bias each output to GND across a shunt inductor |  | 0 |  | V |
| DC Coupling | Bias each output to a negative voltage rail across a 25 Ω to 200 Ω resistor, selected such that VCM_{OUT} = 0 V, VCM_{OUT} = 0.3 V with a 25 Ω resistor to GND, and I_{OUTFS} = 20 mA |  | 0 | 0.3 | V |
| Differential Resistance |  |  | 100 |  | Ω |

- **Note 1:** For dc-coupled applications, the maximum full-scale output current is limited by the maximum VCM_{OUT} specification.
- **Note 2:** The actual measured full-scale power is frequency dependent due to DAC sinc response, impedance mismatch loss, and balun insertion loss.

### ADC DC SPECIFICATIONS

Nominal supplies with ADC setup in 6 GSPS, full bandwidth mode (all digital downconverters bypassed). For the minimum and maximum values, T_{J} = -40°C to +120°C, and for the typical values, T_{A} = 25°C, which corresponds to T_{J} = 80°C, unless otherwise noted.

### Table 4. ADC DC Specifications

**Table 4. ADC DC Specifications** ([table-03-p5-spec.csv](ad9082/tables/table-03-p5-spec.csv), p. 5)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| ADC RESOLUTION |  | 12 |  |  | Bit |
| **ADC ACCURACY** |  |  |  |  |  |
| No Missing Codes |  |  | Guaranteed |  |  |
| Offset Error |  |  | 0.04 |  | % FSR |
| Offset Matching |  |  | 0.03 |  | % FSR |
| Gain Error |  |  | 1.5 |  | % FSR |
| Gain Matching |  |  | 0.6 |  | % FSR |
| DNL |  |  | 0.32 |  | LSB |
| INL |  |  | 1.38 |  | LSB |
| **ADC ANALOG INPUTS** | ADCxP and ADCxN |  |  |  |  |
| Differential Input Voltage |  |  | 1.475 |  | V p-p |
| Full-Scale Sine Wave Input Power | Input power level resulting 0 dBFS tone level on fast Fourier transform (FFT) |  | 3.9 |  | dBm |
| Common-Mode Input Voltage (VCM_{IN}) | AC-coupled, equal to voltage at VCMx for ADCx input |  | 1 |  | V |
| Differential Input Resistance |  |  | 100 |  | Ω |
| Differential Input Capacitance |  |  | 0.4 |  | pF |
| Return Loss | <2.7 GHz |  | −4.3 |  | dB |
| Return Loss | 2.7 GHz to 3.8 GHz |  | −3.6 |  | dB |
| Return Loss | 3.8 GHz to 5.4 GHz |  | −2.9 |  | dB |

### CLOCK INPUTS AND OUTPUTS

For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply, unless otherwise noted. For the typical values, T_{A} = 25°C, which corresponds to T_{J} = 80°C, unless otherwise noted.

**Table 5. Clock Inputs and Outputs** ([table-04-p6-spec.csv](ad9082/tables/table-04-p6-spec.csv), p. 6)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **CLOCK INPUTS** | CLKINP and CLKINN |  |  |  |  |
| Differential Input Power | Direct RF clock |  |  |  |  |
| Minimum |  |  |  | 0 | dBm |
| Maximum |  |  |  | 6 | dBm |
| Common-Mode Voltage | AC-coupled |  |  | 0.5 | V |
| Differential Input Resistance |  |  |  | 100 | Ω |
| Differential Input Capacitance |  |  |  | 0.3 | pF |
| **CLOCK OUTPUTS (ADC CLOCK DRIVER)** | ADCDRVP and ADCDRVN |  |  |  |  |
| Differential Output Voltage Magnitude[^1] | 1.5 GHz |  |  | 740 | mV p-p |
| Differential Output Voltage Magnitude[^1] | 2.0 GHz |  |  | 690 | mV p-p |
| Differential Output Voltage Magnitude[^1] | 3 GHz |  |  | 640 | mV p-p |
| Differential Output Voltage Magnitude[^1] | 6 GHz |  |  | 490 | mV p-p |
| Differential Output Resistance |  |  |  | 100 | Ω |
| Common-Mode Voltage | AC-coupled |  |  | 0.5 | V |

- **Note 1:** Measured with a differential 100 Ω load and less than 2 mm of printed circuit board (PCB) trace from the package ball.

### CLOCK INPUT AND PHASE-LOCKED LOOP (PLL) FREQUENCY SPECIFICATIONS

For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply, unless otherwise noted. For the typical values, T_{A} = 25°C, which corresponds to T_{J} = 80°C, unless otherwise noted.

**Table 6. Clock Input and PLL Specifications** ([table-05-p6-spec.csv](ad9082/tables/table-05-p6-spec.csv), p. 6)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| CLOCK INPUTS (CLKINP, CLKINN) FREQUENCY RANGES |  | 25 |  | 12000 | MHz |
| PHASE FREQUENCY DETECTOR (PFD) INPUT FREQUENCY RANGES |  | 25 |  | 750 | MHz |
| **FREQUENCY RANGES ACCORDING TO CLOCK PATH CONFIGURATION** |  |  |  |  |  |
| Direct Clock (PLL Off) |  | 2900[^1] |  | 12000 | MHz |
| PLL Reference Clock (PLL On)[^2] | M divider set to divide by 1 | 25 |  | 750 | MHz |
| PLL Reference Clock (PLL On)[^2] | M divider set to divide by 2 | 50 |  | 1500 | MHz |
| PLL Reference Clock (PLL On)[^2] | M divider set to divide by 3 | 75 |  | 2250 | MHz |
| PLL Reference Clock (PLL On)[^2] | M divider set to divide by 4 | 100 |  | 3000 | MHz |
| **PLL VOLTAGE CONTROLLED OSCILLATOR (VCO) FREQUENCY RANGES** |  |  |  |  |  |
| VCO Output[^2] | D divider set to divide by 1 | 5.8 |  | 12 | GHz |
| VCO Output[^2] | D divider set to divide by 2 | 2.9 |  | 6 | GHz |
| VCO Output[^2] | D divider set to divide by 3 | 1.93333 |  | 4 | GHz |
| VCO Output[^2] | D divider set to divide by 4 | 1.45 |  | 3 | GHz |

- **Note 1:** The minimum direct clock frequency is limited by the minimum DAC (core) sample rate, as specified in Table 7. The clock receiver can accommodate the full range between the minimum PLL reference clock frequency and the maximum direct clock frequency.
- **Note 2:** Refer to the UG-1578 user guide for information on the M divider and the D divider.

### DAC SAMPLE RATE SPECIFICATIONS

Nominal supplies. For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply. For the typical values, T_{A} = 25°C, unless otherwise noted.

### Table 7. DAC Sample Rate Specifications

**Table 7. DAC Sample Rate Specifications** ([table-06-p7-spec.csv](ad9082/tables/table-06-p7-spec.csv), p. 7)

| PARAMETER | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|
| **DAC SAMPLE RATE[^1]** |  |  |  |  |
| Minimum |  |  | 2.9 | GSPS |
| Maximum | 12 |  |  | GSPS |

- **Note 1:** Pertains to the update rate of the DAC core independent of the datapath and JESD204 mode configuration.

### ADC SAMPLE RATE SPECIFICATIONS

Nominal supplies. For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply. For the typical values, T_{A} = 25°C, unless otherwise noted.

### Table 8. ADC Sample Rate Specifications

**Table 8. ADC Sample Rate Specifications** ([table-07-p7-spec.csv](ad9082/tables/table-07-p7-spec.csv), p. 7)

| PARAMETER | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|
| **ADC SAMPLE RATE[^1]** |  |  |  |  |
| Minimum |  |  | 1.45 | GSPS |
| Maximum | 6 |  |  | GSPS |
| Aperture Jitter[^2] |  | 65 |  | fs rms |

- **Note 1:** Pertains to the update rate of the ADC core independent of the datapath and JESD204 mode configuration.
- **Note 2:** Measured using a signal-to-noise ratio (SNR) degradation method with the DAC disabled, clock divider = 1, f_{ADC} = 6 GSPS, and input frequency (f_{IN}) = 5.55 GHz.

### INPUT AND OUTPUT DATA RATE SPECIFICATIONS

For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply, unless otherwise noted.

**Table 9.** ([table-08-p8-spec.csv](ad9082/tables/table-08-p8-spec.csv), p. 8)

| PARAMETER[^1][^2] | CONDITIONS | MAX | UNITS |
|---|---|---|---|
| **MAXIMUM DATA RATE PER NUMBER OF ACTIVE DAC OUTPUTS** |  |  |  |
| MAXIMUM DATA RATE PER NUMBER OF ACTIVE DAC OUTPUTS | Single DAC, fine digital upconverter (FDUC) and coarse digital upconverter (CDUC) bypassed (1× interpolation), 16-bit resolution, limited by the maximum DAC clock rate | 12000 | MSPS |
| MAXIMUM DATA RATE PER NUMBER OF ACTIVE DAC OUTPUTS | Dual DAC FDUC and CDUC bypassed (1× interpolation), 16-bit resolution (M = 2, L = 8) | 6000 | MSPS |
| MAXIMUM DATA RATE PER NUMBER OF ACTIVE DAC OUTPUTS | Quad DAC, FDUC and CDUC bypassed (1× interpolation), 12-bit resolution, limited by the maximum JESD204C link throughput (M = 4, L = 8) | 4000 | MSPS |
| **MAXIMUM COMPLEX I/Q DATA RATE PER NUMBER OF ACTIVE INPUT DATA CHANNELS** |  |  |  |
| MAXIMUM COMPLEX I/Q DATA RATE PER NUMBER OF ACTIVE INPUT DATA CHANNELS | 1 channel: FDUC bypassed, 1 CDUC enabled, 12-bit or 16-bit resolution, limited by the maximum CDUC numerically controlled oscillator (NCO) clock rate | 6000 | MSPS |
| MAXIMUM COMPLEX I/Q DATA RATE PER NUMBER OF ACTIVE INPUT DATA CHANNELS | 2 channels: FDUC bypassed, 2 CDUCs enabled, 12-bit resolution, limited by the maximum JESD204C link throughput (M = 4, L = 8) | 4000 | MSPS |
| MAXIMUM COMPLEX I/Q DATA RATE PER NUMBER OF ACTIVE INPUT DATA CHANNELS | 4 channels: FDUC bypassed, 4 CDUCs enabled, 12-bit resolution, limited by the maximum JESD204C link throughput (M = 8, L = 8) | 2000 | MSPS |
| MAXIMUM COMPLEX I/Q DATA RATE PER NUMBER OF ACTIVE INPUT DATA CHANNELS | 8 channels: 8 FDUCs enabled, one or more CDUCs enabled, 12-bit or 16-bit resolution, limited by the maximum FDUC NCO clock rate divided by the minimum 2× interpolation rate required to enable the FDUC | 750 | MSPS |

- **Note 1:** The values listed for these parameters are the maximum possible when considering all JESD204 modes of operation. Some modes are more limiting, based on other parameters.
- **Note 2:** The interpolation filters in the Tx datapath have a total complex filter bandwidth of 80% of the data rate, combining the 40% bandwidth in the I path and 40% bandwidth in the Q path. Similarly, the decimation stages inside the Rx datapath use filters with a total complex filter bandwidth of 81.4%. Therefore, the maximum allowed instantaneous complex signal bandwidth (iBW) per channel is calculated as iBW = (complex I/Q data rate per channel) × (total complex filter bandwidth).

### NCO FREQUENCY SPECIFICATIONS

For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply, unless otherwise noted.

**Table 10.** ([table-09-p9-spec.csv](ad9082/tables/table-09-p9-spec.csv), p. 9)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **MAXIMUM NCO CLOCK RATE** |  |  |  |  |  |
| FDUC NCO |  |  |  | 1.5 | GHz |
| CDUC NCO |  |  |  | 12 | GHz |
| Fine Digital Downconverter (FDDC) NCO |  |  |  | 1.5 | GHz |
| Coarse Digital Downconverter (CDDC) NCO |  |  |  | 6 | GHz |
| **MAXIMUM NCO SHIFT FREQUENCY RANGE** |  |  |  |  |  |
| Channel NCO | Channel summing node = 1.5 GHz, channel interpolation rate > 1× | −750 |  | +750 | MHz |
| Main DAC NCO | f_{DAC} = 12 GHz, main interpolation rate > 1× | −6 |  | +6 | GHz |
| Main ADC NCO | f_{ADC} = 6 GHz, main decimation rate > 1× | −3 |  | +3 | GHz |
| **MAXIMUM FREQUENCY SPACING BETWEEN CHANNELS** |  |  |  |  |  |
| Tx Channels | Maximum FDUC NCO clock rate × 0.8[^1] |  |  | 1200 | MHz |
| Rx Channels | Maximum FDDC NCO clock rate × 0.814[^2] |  |  | 1221 | MHz |

- **Note 1:** The 0.8 factor is because the total complex pass band of the first interpolation filter is 80% of the input data rate of the filter.
- **Note 2:** The 0.814 factor is because the total complex pass band of the decimation filter is 81.4% of the output data rate of the filter.

### JESD204B AND JESD204C INTERFACE ELECTRICAL AND SPEED SPECIFICATIONS

Nominal supplies. For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply, and for the typical values, T_{A} = 25°C, unless otherwise noted.

### Table 11. Serial Interface Rate Specifications

**Table 11. Serial Interface Rate Specifications** ([table-10-p10-spec.csv](ad9082/tables/table-10-p10-spec.csv), p. 10)

| PARAMETER | CONDITIONS | MIN | MAX | UNITS |
|---|---|---|---|---|
| JESD204B SERIAL INTERFACE RATE | Serial lane rate | 1.0 | 15.5 | Gbps |
| Unit Interval |  | 64.5 | 1000.0 | ps |
| JESD204C SERIAL INTERFACE RATE | Serial lane rate | 6.0 | 24.75 | Gbps |
| Unit Interval |  | 40.4 | 166.67 | ps |

### Table 12. JESD204 Receiver (JRx) Electrical Specifications

**Table 12. JESD204 Receiver (JRx) Electrical Specifications** ([table-11-p10-spec.csv](ad9082/tables/table-11-p10-spec.csv), p. 10)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **JESD204 DATA INPUTS** | SERDINx±, where x = 0 to 7 |  |  |  |  |
| Standards Compliance |  |  | JESD204B and JESD204C |  |  |
| Differential Voltage, R_{VDIFF} |  |  | 800 |  | mV p-p |
| Differential Impedance, Z_{RDIFF} | At dc |  | 98 |  | Ω |
| Termination Voltage, V_{TT} | AC-coupled |  | 0.97 |  | V |
| **SYNCxOUTB± OUTPUTS[^1]** | Where x = 0 or1 |  |  |  |  |
| Output Differential Voltage, V_{OD} | Driving 100 Ω differential load |  | 400 |  | mV |
| Output Offset Voltage, V_{OS} |  |  | DVDD1P8/2 + 0.2 |  | V |
| SYNCxOUTB+ AND SYNCxOUTB− | CMOS output option |  | Refer to the CMOS Pin Specifications section |  |  |

- **Note 1:** IEEE 1596.3 Standard LVDS compatible.

### Table 13. JESD204 Transmitter (JTx) Electrical Specifications

**Table 13. JESD204 Transmitter (JTx) Electrical Specifications** ([table-12-p10-spec.csv](ad9082/tables/table-12-p10-spec.csv), p. 10)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **JESD204 DATA OUTPUTS** | SERDOUTx±, where x = 0 to 7 |  |  |  |  |
| Standards Compliance |  |  | JESD204B and JESD204C |  |  |
| Differential Output Voltage | Maximum strength |  | 675 |  | mV p-p |
| Differential Termination Impedance |  | 80 | 108 | 120 | Ω |
| Rise Time, t_{R} | 20% to 80% into 100 Ω load |  | 18 |  | ps |
| Fall Time, t_{F} | 20% to 80% into 100 Ω load |  | 18 |  | ps |
| **SYNCxINB± INPUTS[^1]** | Where x = 0 or1 |  |  |  |  |
| Logic Compliance |  |  | LVDS |  |  |
| Differential Input Voltage |  | 0.24 | 0.7 | 1.9 | V p-p |
| Input Common-Mode Voltage | DC-coupled |  | 0.675 | 2 | V |
| R_{IN} (Differential) |  |  | 18 |  | kΩ |
| Input Capacitance (Differential) |  |  | 1 |  | pF |
| SYNCxINB+ AND SYNCxINB− | CMOS input option |  | Refer to the CMOS Pin Specifications section |  |  |

- **Note 1:** IEEE 1596.3 Standard low voltage differential signaling (LVDS) compatible.

### Table 14. SYSREF Electrical Specifications

**Table 14. SYSREF Electrical Specifications** ([table-13-p10-spec.csv](ad9082/tables/table-13-p10-spec.csv), p. 10)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **SYSREFP AND SYSREFN INPUTS** |  |  |  |  |  |
| Logic Compliance |  |  | LVDS/LVPECL[^1] |  |  |
| Differential Input Voltage |  |  | 0.7 | 1.9 | V p-p |
| Input Common-Mode Voltage Range | DC-coupled |  | 0.675 | 2 | V |
| Input Reference, R_{IN} (Differential) |  |  | 100 |  | Ω |
| Input Capacitance (Differential) |  |  | 1 |  | pF |

- **Note 1:** LVPECL means low voltage positive/pseudo emitter-coupled logic.

### CMOS PIN SPECIFICATIONS

For the minimum and maximum values, T_{J} = -40°C to +120°C, 1.7 V ≤ DVDD1P8 ≤ 2.1 V, other supplies nominal, unless otherwise noted.

**Table 15.** ([table-14-p11-spec.csv](ad9082/tables/table-14-p11-spec.csv), p. 11)

| PARAMETER | SYMBOL | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|---|
| **INPUTS** |  | SDIO, SCLK, CSB, RESETB, RXEN0, RXEN1, TXEN0, TXEN1, SYNC0INB±, SYNC1INB±, and GPIOx |  |  |  |  |
| Logic 1 Voltage | V_{IH} |  | 0.70 × DVDD1P8 |  |  | V |
| Logic 0 Voltage | V_{IL} |  |  |  | 0.3 × DVDD1P8 | V |
| Input Resistance |  |  | 40 |  |  | kΩ |
| **OUTPUTS** |  | SDIO, SDO, GPIOx, ADCx_FDx, ADCx_SMONx, SYNC0OUTB±, and SYNC1OUTB±, 4 mA load |  |  |  |  |
| Logic 1 Voltage | V_{OH} |  | DVDD1P8 – 0.45 |  |  | V |
| Logic 0 Voltage | V_{OL} |  |  |  | 0.45 | V |
| **INTERRUPT OUTPUTS** |  | IRQB_0 and IRQB_1, pull-up resistor of 5 kΩ to DVDD1P8 |  |  |  |  |
| Logic 1 Voltage | V_{OH} |  | 1.35 |  |  | V |
| Logic 0 Voltage | V_{OL} |  |  |  | 0.48 | V |

### DAC AC SPECIFICATIONS

Nominal supplies with T_{A} = 25°C. f_{IQ_DATA} = 1500 MSPS. Specifications represent the average of all four DAC channels with the DAC I_{OUTFS} = 26 mA, unless otherwise noted.

**Table 16.** ([table-15-p11-spec.csv](ad9082/tables/table-15-p11-spec.csv), p. 11)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **SPURIOUS-FREE DYNAMIC RANGE (SFDR)** |  |  |  |  |  |
| **Single-Tone, f_{DAC} = 12 GSPS** | −7 dBFS digital backoff, shuffle enabled, 15C mode |  |  |  |  |
| Output Frequency (f_{OUT}) = 70 MHz |  | 63 | 80 |  | dBc |
| f_{OUT} = 100 MHz |  |  | 77 |  | dBc |
| f_{OUT} = 500 MHz |  |  | 76 |  | dBc |
| f_{OUT} = 900 MHz |  |  | 77 |  | dBc |
| f_{OUT} = 1900 MHz |  | 61 | 79 |  | dBc |
| f_{OUT} = 2600 MHz |  |  | 75 |  | dBc |
| f_{OUT} = 3700 MHz |  |  | 69 |  | dBc |
| f_{OUT} = 4500 MHz |  |  | 68 |  | dBc |
| **Single-Tone, f_{DAC} = 9 GSPS** | −7 dBFS digital backoff, shuffle enabled, 15C mode |  |  |  |  |
| f_{OUT} = 100 MHz |  |  | 78 |  | dBc |
| f_{OUT} = 500 MHz |  |  | 78 |  | dBc |
| f_{OUT} = 900 MHz |  |  | 77 |  | dBc |
| f_{OUT} = 1900 MHz |  |  | 80 |  | dBc |
| f_{OUT} = 2600 MHz |  |  | 80 |  | dBc |
| f_{OUT} = 3700 MHz |  |  | 72 |  | dBc |
| **Single-Tone, f_{DAC} = 6 GSPS** | −7 dBFS digital backoff, shuffle enabled, 15C mode |  |  |  |  |
| f_{OUT} = 100 MHz |  |  | 84 |  | dBc |
| f_{OUT} = 500 MHz |  |  | 81 |  | dBc |
| f_{OUT} = 900 MHz |  |  | 82 |  | dBc |
| f_{OUT} = 1900 MHz |  |  | 81 |  | dBc |
| **ADJACENT CHANNEL LEAKAGE RATIO** |  |  |  |  |  |
| **Single Carrier 20 MHz LTE Downlink Test Vector** | −1 dBFS digital backoff, 256QAM |  |  |  |  |
| f_{DAC} = 12 GSPS | f_{OUT} = 1840 MHz |  | 77 |  | dBc |
|  | f_{OUT} = 2650 MHz |  | 76 |  | dBc |
|  | f_{OUT} = 3500 MHz |  | 73 |  | dBc |
| f_{DAC} = 9 GSPS | f_{OUT} = 1900 MHz |  | 77 |  | dBc |
|  | f_{OUT} = 2650 MHz |  | 77 |  | dBc |
| f_{DAC} = 6 GSPS | f_{OUT} = 750 MHz |  | 79 |  | dBc |
|  | f_{OUT} = 1840 MHz |  | 77 |  | dBc |
| **THIRD-ORDER INTERMODULATION DISTORTION (IMD3)** | Two-tone test, 1 MHz spacing, 0 dBFS digital backoff, −6 dBFS per tone |  |  |  |  |
| f_{DAC} = 12 GSPS | f_{OUT} = 1900 MHz |  | −69 | −62 | dBc |
|  | f_{OUT} = 2600 MHz |  | −72 |  | dBc |
|  | f_{OUT} = 3700 MHz |  | −72 |  | dBc |
| f_{DAC} = 9 GSPS | f_{OUT} = 1900 MHz |  | −79 |  | dBc |
|  | f_{OUT} = 2600 MHz |  | −76 |  | dBc |
| f_{DAC} = 6 GSPS | f_{OUT} = 900 MHz |  | −79 |  | dBc |
|  | f_{OUT} = 1900 MHz |  | −90 |  | dBc |
| **NOISE SPECTRAL DENSITY (NSD)** | 0 dBFS, NSD measurement taken at 10% away from f_{OUT}, shuffle off |  |  |  |  |
| **Single-Tone, f_{DAC} = 12 GSPS** |  |  |  |  |  |
| f_{OUT} = 150 MHz |  |  | −168 |  | dBc/Hz |
| f_{OUT} = 500 MHz |  |  | −167 |  | dBc/Hz |
| f_{OUT} = 950 MHz |  |  | −165 |  | dBc/Hz |
| f_{OUT} = 1840 MHz |  |  | −162 |  | dBc/Hz |
| f_{OUT} = 2650 MHz |  |  | −160 |  | dBc/Hz |
| f_{OUT} = 3700 MHz |  |  | −155 |  | dBc/Hz |
| f_{OUT} = 4500 MHz |  |  | −154 |  | dBc/Hz |
| **Single-Tone, f_{DAC} = 9 GSPS** |  |  |  |  |  |
| f_{OUT} = 150 MHz |  |  | −168 |  | dBc/Hz |
| f_{OUT} = 500 MHz |  |  | −166 |  | dBc/Hz |
| f_{OUT} = 950 MHz |  |  | −164 |  | dBc/Hz |
| f_{OUT} = 1840 MHz |  |  | −160 |  | dBc/Hz |
| f_{OUT} = 2650 MHz |  |  | −158 |  | dBc/Hz |
| f_{OUT} = 3700 MHz |  |  | −154 |  | dBc/Hz |
| **Single-Tone, f_{DAC} = 6 GSPS** |  |  |  |  |  |
| f_{OUT} = 150 MHz |  |  | −168 |  | dBc/Hz |
| f_{OUT} = 500 MHz |  |  | −165 |  | dBc/Hz |
| f_{OUT} = 950 MHz |  |  | −163 |  | dBc/Hz |
| f_{OUT} = 1840 MHz |  |  | −159 |  | dBc/Hz |
| f_{OUT} = 2650 MHz |  |  | −157 |  | dBc/Hz |
| **SINGLE SIDEBAND PHASE NOISE OFFSET (PLL DISABLED)** | Direct RF clock input at 7 dBm |  |  |  |  |
| f_{OUT} = 3 GHz, f_{DAC} = 12 GSPS, CLKINx Frequency (f_{CLKIN}) = 12 GHz | R&S SMA100B B711 option |  |  |  |  |
| 1 kHz |  |  | −118 |  | dBc/Hz |
| 10 kHz |  |  | −129 |  | dBc/Hz |
| 100 kHz |  |  | −137 |  | dBc/Hz |
| 600 kHz |  |  | −144 |  | dBc/Hz |
| 1.2 MHz |  |  | −148 |  | dBc/Hz |
| 1.8 MHz |  |  | −149 |  | dBc/Hz |
| 6 MHz |  |  | −153 |  | dBc/Hz |
| **SINGLE SIDEBAND PHASE NOISE OFFSET (PLL ENABLED)** | Loop filter component values include C1 = 22 nF, R1 = 226 Ω, C2 = 2.2 nF, C3 = 33 nF, and phase detector frequency (PFD) = 500 MHz[^1] |  |  |  |  |
| f_{OUT} = 1.8 GHz, f_{DAC} = 12 GSPS, f_{CLKIN} = 0.5 GHz |  |  |  |  |  |
| 1 kHz |  |  | −106 |  | dBc/Hz |
| 10 kHz |  |  | −113 |  | dBc/Hz |
| 100 kHz |  |  | −120 |  | dBc/Hz |
| 600 kHz |  |  | −127 |  | dBc/Hz |
| 1.2 MHz |  |  | −134 |  | dBc/Hz |
| 1.8 MHz |  |  | −138 |  | dBc/Hz |
| 6 MHz |  |  | −150 |  | dBc/Hz |

- **Note 1:** Refer to the UG-1578 user guide for details on the loop filter components.

### ADC AC SPECIFICATIONS

Nominal supplies with T_{A} = 25°C. Input amplitude (A_{IN}) = -1 dBFS, full bandwidth (no decimation). For the minimum and maximum values, T_{J} = -40°C to +120°C. Specifications represent the average of two ADC channels with DACs powered on. See the AN-835 Application Note, Understanding High Speed ADC Testing and Evaluation , for definitions and for details on how these tests were completed.

**Table 17.** ([table-16-p14-spec.csv](ad9082/tables/table-16-p14-spec.csv), p. 14)

| PARAMETER | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|
| NOISE DENSITY[^1] |  | −153 |  | dBFS/Hz |
| NOISE FIGURE[^2] |  | 25.3 |  | dB |
| CODE ERROR RATE (CER) |  | 1.6 × 10^{−20} |  | Errors |
| **SIGNAL-TO-NOISE RATIO (SNR)** |  |  |  |  |
| f_{IN} = 450 MHz |  | 56.9 |  | dBFS |
| f_{IN} = 900 MHz |  | 56.7 |  | dBFS |
| f_{IN} = 1800 MHz |  | 54.9 |  | dBFS |
| f_{IN} = 2700 MHz | 49.6 | 52.7 |  | dBFS |
| f_{IN} = 3600 MHz |  | 52.1 |  | dBFS |
| f_{IN} = 4500 MHz |  | 50.7 |  | dBFS |
| f_{IN} = 5400 MHz |  | 50.8 |  | dBFS |
| f_{IN} = 6300 MHz |  | 49.7 |  | dBFS |
| f_{IN} = 7200 MHz |  | 48.8 |  | dBFS |
| **SIGNAL-TO-NOISE-AND-DISTORTION (SINAD)** |  |  |  |  |
| f_{IN} = 450 MHz |  | 56.9 |  | dBFS |
| f_{IN} = 900 MHz |  | 56.5 |  | dBFS |
| f_{IN} = 1800 MHz |  | 54.5 |  | dBFS |
| f_{IN} = 2700 MHz | 49.5 | 52.5 |  | dBFS |
| f_{IN} = 3600 MHz |  | 51.2 |  | dBFS |
| f_{IN} = 4500 MHz |  | 50.2 |  | dBFS |
| f_{IN} = 5400 MHz |  | 49.0 |  | dBFS |
| f_{IN} = 6300 MHz |  | 48.0 |  | dBFS |
| f_{IN} = 7200 MHz |  | 47.4 |  | dBFS |
| **EFFECTIVE NUMBER OF BITS (ENOB)** |  |  |  |  |
| f_{IN} = 450 MHz |  | 9.2 |  | Bits |
| f_{IN} = 900 MHz |  | 9.1 |  | Bits |
| f_{IN} = 1800 MHz |  | 8.8 |  | Bits |
| f_{IN} = 2700 MHz | 7.9 | 8.4 |  | Bits |
| f_{IN} = 3600 MHz |  | 8.2 |  | Bits |
| f_{IN} = 4500 MHz |  | 8.05 |  | Bits |
| f_{IN} = 5400 MHz |  | 7.8 |  | Bits |
| f_{IN} = 6300 MHz |  | 7.7 |  | Bits |
| f_{IN} = 7200 MHz |  | 7.6 |  | Bits |
| **SECOND-ORDER HARMONIC DISTORTION (HD2)** |  |  |  |  |
| f_{IN} = 450 MHz |  | −78 |  | dBFS |
| f_{IN} = 900 MHz |  | −74 |  | dBFS |
| f_{IN} = 1800 MHz |  | −71 |  | dBFS |
| f_{IN} = 2700 MHz |  | −72 | −57 | dBFS |
| f_{IN} = 3600 MHz |  | −60 |  | dBFS |
| f_{IN} = 4500 MHz |  | −62 |  | dBFS |
| f_{IN} = 5400 MHz |  | −55 |  | dBFS |
| f_{IN} = 6300 MHz |  | −54 |  | dBFS |
| f_{IN} = 7200 MHz |  | −54 |  | dBFS |
| **THIRD-ORDER HARMONIC DISTORTION (HD3)** |  |  |  |  |
| f_{IN} = 450 MHz |  | −84 |  | dBFS |
| f_{IN} = 900 MHz |  | −83 |  | dBFS |
| f_{IN} = 1800 MHz |  | −66 |  | dBFS |
| f_{IN} = 2700 MHz |  | −68 | −62 | dBFS |
| f_{IN} = 3600 MHz |  | −70 |  | dBFS |
| f_{IN} = 4500 MHz |  | −67 |  | dBFS |
| f_{IN} = 5400 MHz |  | −63 |  | dBFS |
| f_{IN} = 6300 MHz |  | −65 |  | dBFS |
| f_{IN} = 7200 MHz |  | −62 |  | dBFS |
| **WORST OTHER, EXCLUDING HD2 OR HD3 HARMONIC** |  |  |  |  |
| f_{IN} = 450 MHz |  | −90 |  | dBFS |
| f_{IN} = 900 MHz |  | −91 |  | dBFS |
| f_{IN} = 1800 MHz |  | −86 |  | dBFS |
| f_{IN} = 2700 MHz |  | −83 | −61 | dBFS |
| f_{IN} = 3600 MHz |  | −81 |  | dBFS |
| f_{IN} = 4500 MHz |  | −78 |  | dBFS |
| f_{IN} = 5400 MHz |  | −78 |  | dBFS |
| f_{IN} = 6300 MHz |  | −76 |  | dBFS |
| f_{IN} = 7200 MHz |  | −75 |  | dBFS |
| **DIGITAL COUPLING SPUR (f_{IN} ± f_{S}/4)** |  |  |  |  |
| f_{IN} = 450 MHz |  | −92 |  | dBFS |
| f_{IN} = 900 MHz |  | −88 |  | dBFS |
| f_{IN} = 1800 MHz |  | −81 |  | dBFS |
| f_{IN} = 2700 MHz |  | −81 |  | dBFS |
| f_{IN} = 3600 MHz |  | −78 |  | dBFS |
| f_{IN} = 4500 MHz |  | −74 |  | dBFS |
| f_{IN} = 5400 MHz |  | −76 |  | dBFS |
| f_{IN} = 6300 MHz |  | −71 |  | dBFS |
| f_{IN} = 7200 MHz |  | −70 |  | dBFS |
| TWO-TONE IMD3, INPUT AMPLITUDE 1 (A_{IN1}) = INPUT AMPLITUDE 2 (A_{IN2}) = −7 dBFS |  |  |  |  |
| Input Frequency 1 (f_{IN1}) = 1775 MHz, Input Frequency 2 (f_{IN2}) = 1825 MHz |  | −84 |  | dBFS |
| f_{IN1} = 2675 MHz, f_{IN2} = 2725 MHz |  | −86 |  | dBFS |
| f_{IN1} = 3575 MHz, f_{IN2} = 3625 MHz |  | −75 |  | dBFS |
| f_{IN1} = 5375 MHz, f_{IN2} = 5425 MHz |  | −67 |  | dBFS |
| ANALOG BANDWIDTH[^3] |  | 8 |  | GHz |

- **Note 1:** Noise density is measured at a low analog amplitude and/or frequency where timing jitter does not degrade noise floor.
- **Note 2:** Noise figure is based on a nominal full-scale input power of 4.5 dBm with an input span of 1.475 V p-p and R_{IN} = 100 Ω.
- **Note 3:** Analog input bandwidth is the bandwidth of operation in which the full-scale input frequency response rolls off by −3 dB based on a de-embedded model of the ADC extracted from the measured frequency response on evaluation board. This bandwidth requires optimized matching network to achieve this upper bandwidth.

### TIMING SPECIFICATIONS

For the minimum and maximum values, T_{J} = -40°C to +120°C and ±5% of nominal supply, unless otherwise noted.

**Table 18.** ([table-17-p16-spec.csv](ad9082/tables/table-17-p16-spec.csv), p. 16)

| PARAMETER | SYMBOL | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|---|
| **SERIAL PORT INTERFACE (SPI) WRITE OPERATION** |  |  |  |  |  |  |
| Maximum SCLK Clock Rate | f_{SCLK}, 1/t_{SCLK} |  | 33 |  |  | MHz |
| SCLK Clock High | t_{PWH} | SCLK = 33 MHz | 8 |  |  | ns |
| SCLK Clock Low | t_{PWL} | SCLK = 33 MHz | 8 |  |  | ns |
| SDIO to SCLK Setup Time | t_{DS} |  | 4 |  |  | ns |
| SCLK to SDIO Hold Time | t_{DH} |  | 4 |  |  | ns |
| CSB to SCLK Setup Time | t_{S} |  | 4 |  |  | ns |
| SCLK to CSB Hold Time | t_{H} |  | 4 |  |  | ps |
| **SPI READ OPERATION** |  |  |  |  |  |  |
| **LSB First Data Format** |  |  |  |  |  |  |
| Maximum SCLK Clock Rate | f_{SCLK}, 1/t_{SCLK} |  | 33 |  |  | MHz |
| SCLK Clock High | t_{PWH} |  | 8 |  |  | ns |
| SCLK Clock Low | t_{PWL} |  | 8 |  |  | ns |
| **MSB First Data Format** |  |  |  |  |  |  |
| Maximum SCLK Clock Rate | f_{SCLK}, 1/t_{SCLK} |  | 15 |  |  | MHz |
| SCLK Clock High | t_{PWH} |  | 30 |  |  | ns |
| SCLK Clock Low | t_{PWL} |  | 30 |  |  | ns |
| SDIO to SCLK Setup Time | t_{DS} |  | 4 |  |  | ns |
| SCLK to SDIO Hold Time | t_{DH} |  | 4 |  |  | ns |
| CSB to SCLK Setup Time | t_{S} |  | 4 |  |  | ns |
| SCLK to SDIO Data Valid Time | t_{DV} |  | 20 |  |  | ns |
| SCLK to SDO Data Valid Time | t_{DV_SDO} |  | 20 |  |  | ns |
| CSB to SDIO Output Valid to High-Z | t_{Z} |  | 20 |  |  | ns |
| CSB to SDO Output Valid to High-Z | t_{Z_SDO} |  | 20 |  |  | ns |

### Timing Diagrams

![Figure 2. Timing Diagram for 3-Wire Write Operation](ad9082/figures/ad9082-f002-01.png)

*Figure 2. Timing Diagram for 3-Wire Write Operation*

![Figure 3. Timing Diagram for 3-Wire Read Operation](ad9082/figures/ad9082-f002-02.png)

*Figure 3. Timing Diagram for 3-Wire Read Operation*

![Figure 4. Timing Diagram for 4-Wire Read Operation](ad9082/figures/ad9082-f002-03.png)

*Figure 4. Timing Diagram for 4-Wire Read Operation*

Rev. C | Page 16 of 36

### ABSOLUTE MAXIMUM RATINGS

**Table 19.** ([table-18-p17-abs_max.csv](ad9082/tables/table-18-p17-abs_max.csv), p. 17)

| PARAMETER | RATING |
|---|---|
| ISET, DACxP, DACxN, TDP, TDN | −0.3 V to AVDD2 + 0.3 V |
| VCO_COARSE, VCO_FINE, VCO_VCM, VCO_VREG | −0.3 V to AVDD2_PLL + 0.3 V |
| Rx Input Power (ADC0P, ADC0N, ADC1P, ADC1N)[^1] | 22 dBm |
| VCM0, VCM1 | −0.3 V to RVDD2 + 0.3 V |
| CLKINP, CLKINN | −0.2 V to PLLCLKVDD1 + 0.2 V |
| ADCDRVN, ADCDRVP | −0.2 V to CLKVDD1 + 0.2 V |
| SERDINx±, SERDOUTx± | −0.2 V to SVDD1 + 0.2 V |
| SYSREFP, SYSREFN, and SYNCxINB± | −0.2 V to +2.5 V |
| SYNCxOUTB±, SYNCxINB±, RESETB, TXENx, RXENx, IRQB_x, CSB, SCLK, SDIO, SDO, TMU_REFN, TMU_REFP, ADCx_SMON0, ADCx_SMON1, ADCx_FD0, ADCx_FD1, GPIOx | −0.3 V to DVDD1P8 + 0.3 V |
| AVDD2, AVDD2_PLL, BVDD2, RVDD2, SVDD2_PLL, DVDD1P8 | −0.3 V to +2.2 V |
| PLLCLKVDD1, AVDD1, AVDD1_ADC, CLKVDD1, FVDD1, DAVDD1, DVDD1_RT, DCLKVDD1, SVDD1 | −0.2 V to +1.2 V |
| VNN1 | −1.1 V to +0.2 V |
| **Temperature** |  |
| Junction (T_{J})[^2] | 120°C |
| Storage Range | −65°C to +150°C |

- **Note 1:** Tested continuously for 1000 hours with f_{IN} = 4.7 GHz pulsed and continuous tone at maximum allowed T_{J}. Refer to the UG-1578 user guide, for more information.
- **Note 2:** Do not exceed this temperature for any duration of time when the device is powered.

Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability.

### THERMAL RESISTANCE

Thermal performance is directly linked to PCB design and operating environment. The use of appropriate thermal management techniques is recommended to ensure that the maximum T_{J} does not exceed the limits shown in Table 19.

θ_{JA} is the natural convection, junction to ambient thermal resistance measured in a one cubic foot sealed enclosure.

θ_{JC_TOP} is the junction to case, thermal resistance.

θ_{JB} is the junction to board, thermal resistance.

### Table 20. Simulated Thermal Resistance[^1]

**Table 20. Simulated Thermal Resistance[^1]** ([table-19-p17-data.csv](ad9082/tables/table-19-p17-data.csv), p. 17)

| PCB Type | Airflow Velocity (m/sec) | θ_{JA} | θ_{JC_TOP} | θ_{JB} | Unit |
|---|---|---|---|---|---|
| JEDEC 2s2p Board | 0.0 | 14.9 | 0.70 | 1.8 | °C/W |

- **Note 1:** Thermal resistance values specified are simulated based on JEDEC specifications in compliance with JESD51-12 with the device power equal to 9 W.

### ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

### PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

TOP VIEW

(Not to Scale)

| 1        | 2     | 3          | 4           | 5          | 6         | 7          | 8          | 9         | 10        | 11          | 12          | 13                   | 14        | 15         | 16         | 17        | 18        |
|----------|-------|------------|-------------|------------|-----------|------------|------------|-----------|-----------|-------------|-------------|----------------------|-----------|------------|------------|-----------|-----------|
| A GND    | AVDD2 | GND        | GND NC      |            | NC        | GND        | GND        | ADC0N     | ADC0P     | GND         | SYNC1INB-   | SYNC0INB-            | SERDOUT0- | SERDOUT0+  | SVDD1      | GND       | GND       |
| B DAC0P  | GND   | GND        | GND         | GND        | GND       | DNC        | VCM0       | GND       | GND       | RVDD2       | SYNC1INB+   | SYNC0INB+            | GND       | GND        | SVDD1      | SERDOUT7- | SERDOUT7+ |
| C DAC0N  | GND   | ADCDRVN    | ADCDRVP     | GND        | GND       | GND        | GND        | BVNN2     | BVDD3     | GND         | RESETB      | DVDD1P8              | SERDOUT1- | SERDOUT1+  | SVDD1      | GND       | GND       |
| GND D    | AVDD1 | AVDD1      | AVDD1       | GND        | FVDD1     | BVDD2      | VNN1       | GND       | VDD1_ NVG | ADC0_ SMON1 | ADC0_ SMON0 | RXEN1                | GND       | GND        | SVDD1      | SERDOUT6- | SERDOUT6+ |
| GND E    | AVDD2 | AVDD1      | GND         | DAVDD1     | GND       | BVDD2      | VNN1       | NVG1_ OUT | VNN1      | ADC0_FD1    | ADC0_FD0    | RXEN0                | SERDOUT2- | SERDOUT2+  | SVDD1      | GND       | GND       |
| F DAC1N  | GND   | AVDD1      | GND         | DAVDD1     | GND       | GND        | GND        | DVDD1P8   | DVDD1     | ADC1_ SMON1 | ADC1_ SMON0 | SDIO                 | GND       | GND        | SVDD1      | SERDOUT5- | SERDOUT5+ |
| G DAC1P  | GND   | GND        | GND         | GND        | CLKVDD1   | AVDD1_ ADC | AVDD1_ ADC | TMU_ REFN | TMU_ REFP | ADC1_FD1    | ADC1_FD0    | CSB                  | SERDOUT3- | SERDOUT3+  | SVDD1      | GND       | GND       |
| GND H    | AVDD2 | ISET       | DNC         | GND        | GND       | GND        | GND        | DVDD1     | GND       | DVDD1       | GND         | SCLK                 | GND       | GND        | SVDD1      | SERDOUT4- | SERDOUT4+ |
| J CLKINP | GND   | VCO_ FINE  | VCO_ COARSE | PLLCLKVDD1 | DVDD1_ RT | DVDD1_ RT  | GND        | DVDD1     | GND       | DVDD1       | GND         | SDO                  | GND       | GND        | SVDD1_ PLL | GND       | GND       |
| K CLKINN | GND   | VCO_ VREG  | VCO_ VCM    | DCLKVDD1   | DVDD1_ RT | DVDD1_ RT  | GND        | DVDD1     | GND       | DVDD1       | GND         | GPIO9                | GND       | SVDD2_ PLL | SVDD1_ PLL | GND       | GND       |
| GND L    | AVDD2 | AVDD2_ PLL | DNC         | GND        | GND       | GND        | GND        | DVDD1     | GND       | DVDD1       | GND         | GPIO8                | GND       | DNC        | DNC        | SERDIN0-  | SERDIN0+  |
| M DAC2P  | GND   | GND        | GND         | GND        | CLKVDD1   | AVDD1_ ADC | AVDD1_ ADC | DVDD1     | GND       | GPIO3       | GPIO1       | GPIO7                | SERDIN4-  | SERDIN4+   | SVDD1      | GND       | GND       |
| N DAC2N  | GND   | AVDD1      | GND         | DAVDD1     | GND       | GND        | GND        | TDP       | TDN       | GPIO2       | GPIO0       | GPIO6                | GND       | GND        | SVDD1      | SERDIN1-  | SERDIN1+  |
| GND P    | AVDD2 | AVDD1      | GND         | DAVDD1     | GND       | BVDD2      | VNN1       | NVG1_ OUT | VNN1      | GPIO4       | IRQB_0      | TXEN0                | SERDIN7-  | SERDIN7+   | SVDD1      | GND       | GND       |
| GND R    | AVDD1 | AVDD1      | AVDD1       | GND        | FVDD1     | BVDD2      | VNN1       | GND       | VDD1_ NVG | GPIO5       | IRQB_1      | TXEN1                | GND       | GND        | SVDD1      | SERDIN2-  | SERDIN2+  |
| T DAC3N  | GND   | SYSREFN    | SYSREFP     | GND        | GND       | GND        | GND        | BVNN2     | BVDD3     | GND         | GPIO10      | DVDD1P8              | SERDIN6-  | SERDIN6+   | SVDD1      | GND       | GND       |
| U DAC3P  | GND   | GND        | GND         | GND        | GND       | DNC        | VCM1       | GND       | GND       | RVDD2       |             | SYNC1OUTB+SYNC0OUTB+ | GND       | GND        | SVDD1      | SERDIN3-  | SERDIN3+  |
| GND V    | AVDD2 | GND        | GND         | NC         | NC        | GND        | GND        | ADC1N     | ADC1P     | GND         |             | SYNC1OUTB-SYNC0OUTB- | SERDIN5-  | SERDIN5+   | SVDD1      | GND       | GND       |

ANALOG

GROUND

DIGITAL

GROUND

Figure 5. 324-Ball Pin Configuration

SERDES

GROUND

### Table 21. Pin Function Descriptions


**Table 21. Pin Function Descriptions** ([table-20-p19-pin.csv](ad9082/tables/table-20-p19-pin.csv), p. 19)

| Pin No. | Mnemonic | Type | Description |
|---|---|---|---|
| **POWER SUPPLIES** |  |  |  |
| A2, E2, H2, L2, P2, V2 | AVDD2 | Input | Analog 2.0 V Supply Inputs for DAC. |
| L3 | AVDD2_PLL | Input | Analog 2.0 V Supply Input for Clock PLL Linear Dropout Regulator (LDO). |
| D7, E7, P7, R7 | BVDD2 | Input | Analog 2.0 V Supply Inputs for ADC Buffer. |
| B11, U11 | RVDD2 | Input | Analog 2.0 V Supply Inputs for ADC Reference. |
| J5 | PLLCLKVDD1 | Input | Analog 1.0 V Supply Input for Clock PLL. |
| D2 to D4, E3, F3, N3, P3, R2 to R4 | AVDD1 | Input | Analog 1.0 V Supply Inputs for DAC Clock. |
| G7, G8, M7, M8 | AVDD1_ADC | Input | Analog 1.0 V Supply Inputs for ADC. |
| G6, M6 | CLKVDD1 | Input | Analog 1.0 V Supply Inputs for ADC Clock. |
| D6, R6 | FVDD1 | Input | Analog 1.0 V Supply Inputs for ADC Reference. |
| D10, R10 | VDD1_NVG | Input | Analog 1.0 V Supply Inputs for Negative Voltage Generator (NVG) Used to Generate −1 V Output. |
| E9, P9 | NVG1_OUT | Output | Analog −1 V Supply Outputs from NVG. Decouple NVG1_OUT to GND with a 0.1 µF capacitor. |
| D8, E8, E10, P8, R8, P10 | VNN1 | Input | Analog −1 V Supply Inputs for ADC Buffer and Reference. Connect these pins to the adjacent, NVG1_OUT pins. |
| C9, T9 | BVNN2 | Output | Analog −2 V Supply Outputs for ADC Buffer. Decouple each BVNN2 pin to GND with a 0.1 µF capacitor. |
| C10, T10 | BVDD3 | Output | Analog 3 V Supply Output for ADC Buffer. Decouple BVDD3 to GND with 0.1 µF capacitor. |
| E5, F5, N5, P5 | DAVDD1 | Input | Digital Analog 1.0 V Supply Inputs. |
| F10, H9, H11, J9, J11, K9, K11, L9, L11, M9 | DVDD1 | Input | Digital 1.0 V Supply Inputs. |
| J6, J7, K6, K7 | DVDD1_RT | Input | Digital 1.0 Supply Inputs for Retimer Block. |
| K5 | DCLKVDD1 | Input | Digital 1.0 V Clock Generation Supply. |
| A16, B16, C16, D16, E16, F16, G16, H16, M16, N16, P16, R16, T16, U16, V16 | SVDD1 | Input | Digital 1.0 V Supply Inputs for SERDES Deserializer and Serializer. |
| K15 | SVDD2_PLL | Input | Digital 2.0 V Supply Input for SERDES LDO. |
| J16, K16 | SVDD1_PLL | Input | Digital 1.0 V Supply Inputs for SERDES Clock Generation and PLL. |
| C13, F9, T13 | DVDD1P8 | Input | Digital Interface and Temperature Monitoring Unit (TMU) Supply Inputs (Nominal 1.8 V). |
| A1, A3, A4, A7, A8, A11, A17, A18, B2 to B6, B9, B10, B14, B15, C2, C5 to C8, C11, C17, C18, D1, D5, D9, D14, D15, E1, E4, E6, E17, E18, F2, F4, F6 to F8, F14, F15, G2 to G5, G17, G18, H1, H5 to H8, H10, H12, H14, H15, J2, J8, J10, J12, J14, J15, J17, J18, K2, K8, K10, K12, K14, K17, K18, L1, L5 to L8, L10, L12, L14, M2 to M5, M10, M17, M18, N2, N4, N6 to N8, N14, N15, P1, P4, P6, P17, P18, R1, R5, R9, R14, R15, T2, T5 to T8, T11, T17, T18, U2 to U6, U9, U10, U14, U15, V1, V3, V4, V7, V8, V11, V17, V18 | GND | Input/output | Ground References. |
| **ANALOG OUTPUTS** |  |  |  |
| B1, C1 | DAC0P, DAC0N | Output | DAC0 Output Currents, Ground Referenced. Tie these pins to GND if unused. |
| G1, F1 | DAC1P, DAC1N | Output | DAC1 Output Currents, Ground Referenced. Tie these pins to GND if unused. These pins are unused for the AD9082BBPZ-2D2AC. |
| M1, N1 | DAC2P, DAC2N | Output | DAC2 Output Currents, Ground Referenced. Tie these pins to GND if unused. |
| U1, T1 | DAC3P, DAC3N | Output | DAC3 Output Currents, Ground Referenced. Tie these pins to GND if unused. These pins are unused for the AD9082BBPZ-2D2AC. |
| H3 | ISET | Output | DAC Bias Current Setting Pin. Connect this pin with a 5 kΩ resistor to GND. |
| C4, C3 | ADCDRVP, ADCDRVN | Output | ADC Clock Output Options. These pins are disabled by default. |
| B8, U8 | VCM0, VCM1 | Output | ADC Buffer Common-Mode Output Voltage. Decouple this pin to GND with a 0.1 µF capacitor. |
| K3 | VCO_VREG | Output | PLL LDO Regulator Output. Decouple this pin to GND with a 2.2 µF capacitor. |
| G9 | TMU_REFN | Output | TMU ADC Negative Reference. Connect this pin to GND. |
| G10 | TMU_REFP | Output | TMU ADC Positive Reference. Connect this pin to DVDD1P8. |
| **ANALOG INPUTS** |  |  |  |
| A10, A9 | ADC0P, ADC0N | Input | ADC0 Differential Inputs with Internal 100 Ω Differential Resistor. |
| V10, V9 | ADC1P, ADC1N | Input | ADC1 Differential Inputs with Internal 100 Ω Differential Resistor. |
| J3 | VCO_FINE | Input | On-Chip Clock Multiplier and PLL Fine Loop Filter Input. |
| J4 | VCO_COARSE | Input | On-Chip DAC Clock Multiplier and PLL Coarse Loop Filter Input. |
| K4 | VCO_VCM | Input | On-Chip Clock Multiplier and VCO Common-Mode Input. |
| N9, N10 | TDP, TDN | Input | Anode and Cathode of Temperature Diodes. This feature is not supported. Tie TDP and TDN to GND. |
| J1, K1 | CLKINP, CLKINN | Input | Differential Clock Inputs with Nominal 100 Ω Termination. Self bias input requiring ac coupling. When the on-chip clock multiplier PLL is enabled, this input is the reference clock input. If the PLL is disabled, an RF clock equal to the DAC output sample rate is required. |
| **CMOS INPUTS AND OUTPUTS[^1]** |  |  |  |
| G13 | CSB | Input | Serial Port Enable Input. Active low. |
| H13 | SCLK | Input | Serial Plot Clock Input. |
| F13 | SDIO | Input/output | Serial Port Bidirectional Data Input/Output. |
| J13 | SDO | Output | Serial Port Data Output. |
| C12 | RESETB | Input | Active Low Reset Input. RESETB places digital logic and SPI registers in a known default state. RESETB must be connected to a digital IC that is capable of issuing a reset signal for the first step in the device initialization process. |
| E13, D13 | RXEN0, RXEN1 | Input | Active High ADC and Receive Datapath Enable Inputs. RXENx is also SPI configurable. |
| P13, R13 | TXEN0, TXEN1 | Input | Active High DAC and Transmit Datapath Enable Inputs. TXENx is also SPI configurable. |
| D12, D11 | ADC0_SMON0, ADC0_SMON1 | Output | ADC0 Signal Monitoring Outputs by Default. Do not connect if unused. |
| F12, F11 | ADC1_SMON0, ADC1_SMON1 | Output | ADC1 Signal Monitoring Outputs by Default. Do not connect if unused. |
| E12, E11 | ADC0_FD0, ADC0_FD1 | Output | ADC0 Fast Detect Outputs by Default. Do not connect if unused. |
| G12, G11 | ADC1_FD0, ADC1_FD1 | Output | ADC1 Fast Detect Outputs by Default. Do not connect if unused. |
| P12, R12 | IRQB_0, IRQB_1 | Outputs | Interrupt Request 0 and 1 Outputs. These pins are an open-drain, active low output (CMOS levels with respect to DVDD1P8). Connect a 10 kΩ pull-up resistor to DVDD1P8 to prevent these pins from floating when unused. |
| M11, M12, N11, N12, P11, R11 | GPIO0 to GPIO5 | Input/output | General-Purpose Input or Output Pins. These pins control auxiliary functions related to the Tx datapaths. |
| K13, L13, M13, N13, T12 | GPIO6 to GPIO10 | Input/output | General-Purpose Input or Output Pins. These pins control auxiliary functions related to the Rx datapaths and ADCs. |
| **JESD204B or JESD204C COMPATIBLE SERDES DATA LANES AND CONTROL SIGNALS[^2]** |  |  |  |
| L18, L17 | SERDIN0+, SERDIN0− | Input | JRx Lane 0 Inputs, Data True/Complement. |
| N18, N17 | SERDIN1+, SERDIN1− | Input | JRx Lane 1 Inputs, Data True/Complement. |
| R18, R17 | SERDIN2+, SERDIN2− | Input | JRx Lane 2 Inputs, Data True/Complement. |
| U18, U17 | SERDIN3+, SERDIN3− | Input | JRx Lane 3 Inputs, Data True/Complement. |
| M15, M14 | SERDIN4+, SERDIN4− | Input | JRx Lane 4 Inputs, Data True/Complement. |
| V15, V14 | SERDIN5+, SERDIN5− | Input | JRx Lane 5 Inputs, Data True/Complement. |
| T15, T14 | SERDIN6+, SERDIN6− | Input | JRx Lane 6 Inputs, Data True/Complement. |
| P15, P14 | SERDIN7+, SERDIN7− | Input | JRx Lane 7 Inputs, Data True/Complement. |
| U13, V13 | SYNC0OUTB+, SYNC0OUTB− | Output | JRx Link 0 Synchronization Outputs for JESD204B interface. These pins are LVDS or CMOS configurable. These pins can also provide differential 100 Ω output impedance in LVDS mode. |
| U12, V12 | SYNC1OUTB+, SYNC1OUTB− | Output | JRx Link 1 Synchronization Outputs for JESD204B interface or CMOS Input for Transmit Fast Frequency Hopping (FFH) via GPIOx pins. For sync output function, these pins are LVDS or CMOS output configurable and can provide differential 100 Ω output impedance in LVDS mode. |
| A15, A14 | SERDOUT0+, SERDOUT0− | Output | JTx Lane 0 Outputs, Data True/Complement. |
| C15, C14 | SERDOUT1+, SERDOUT1− | Output | JTx Lane 1 Outputs, Data True/Complement. |
| E15, E14 | SERDOUT2+, SERDOUT2− | Output | JTx Lane 2 Outputs, Data True/Complement. |
| G15, G14 | SERDOUT3+, SERDOUT3− | Output | JTx Lane 3 Outputs, Data True/Complement. |
| H18, H17 | SERDOUT4+, SERDOUT4− | Output | JTx Lane 4 Outputs, Data True/Complement. |
| F18, F17 | SERDOUT5+, SERDOUT5− | Output | JTx Lane 5 Outputs, Data True/Complement. |
| D18, D17 | SERDOUT6+, SERDOUT6− | Output | JTx Lane 6 Outputs, Data True/Complement. |
| B18, B17 | SERDOUT7+, SERDOUT7− | Output | JTx Lane 7 Outputs, Data True/Complement. |
| B13, A13 | SYNC0INB+, SYNC0INB− | Input | JTx Link 0 Synchronization Inputs for JESD204B interface. These pins are LVDS or CMOS configurable. These pins are LVDS or CMOS configurable and have selectable internal 100 Ω input impedance for LVDS operation |
| B12, A12 | SYNC1INB+, SYNC1INB− | Input | JTx Link 1 Synchronization Inputs for JESD204B interface or CMOS Inputs for Receive FFH via GPIOx pins. These pins are LVDS or CMOS configurable and have selectable internal 100 Ω input impedance for LVDS operation. |
| T4, T3 | SYSREFP, SYSREFN | Input | Active High JESD204 System Reference Inputs. These pins are configurable for differential current mode logic (CML), PECL, and LVDS with internal 100 Ω termination or single-ended CMOS. |
| **NO CONNECTS AND DO NOT CONNECTS** |  |  |  |
| A5, A6, V5, V6 | NC |  | No Connect. These pins can be left open or connected. |
| B7, H4, L4, L15, L16, U7 | DNC | DNC | Do Not Connect. The pins must be kept open. |

- **Note 1:** CMOS inputs do not have pull-up or pull-down resistors.
- **Note 2:** SERDINx± and SERDOUTx± include 100 Ω internal termination resistors.

### TYPICAL PERFORMANCE CHARACTERISTICS

### DAC

The data curves represent the average performance across all outputs with harmonics and spurs falling in the first Nyquist zone (&lt;f_{DAC}/2). All SFDR, IMD3, and NSD data is measured on a laboratory evaluation board. All data for the phase noise and adjacent channel leakage ratio (ACLR) is measured on the AD9081-FMCA-EBZ or AD9082-FMCA-EBZ customer evaluation boards. For additional information on the JESD204B and JESD204C mode configurations, see the UG-1578 user guide.

![Figure 6. HD2 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C](ad9082/figures/ad9082-f007.png)

*Figure 6. HD2 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C*

Digitized data: [hd2-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-interpolation-1-ma.csv](ad9082/curves/hd2-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-interpolation-1-ma.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 7. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C](ad9082/figures/ad9082-f008.png)

*Figure 7. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C*

Digitized data: [hd2-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-m.csv](ad9082/curves/hd2-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-m.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 8. HD3 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C](ad9082/figures/ad9082-f009.png)

*Figure 8. HD3 vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C*

Digitized data: [hd3-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-interpolation-1-ma.csv](ad9082/curves/hd3-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-interpolation-1-ma.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 9. HD2 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C](ad9082/figures/ad9082-f010.png)

*Figure 9. HD2 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C*

Digitized data: [hd2-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-ma.csv](ad9082/curves/hd2-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-ma.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 10. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B](ad9082/figures/ad9082-f011.png)

*Figure 10. HD2 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B*

Digitized data: [hd2-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-m.csv](ad9082/curves/hd2-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-m.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 11. HD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C](ad9082/figures/ad9082-f012.png)

*Figure 11. HD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C*

Digitized data: [hd3-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-ma.csv](ad9082/curves/hd3-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-ma.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 12. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C](ad9082/figures/ad9082-f013.png)

*Figure 12. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C*

Digitized data: [hd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-m.csv](ad9082/curves/hd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-m.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 13. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C](ad9082/figures/ad9082-f014.png)

*Figure 13. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C*

Digitized data: [sfdr-worst-spurious-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-in.csv](ad9082/curves/sfdr-worst-spurious-vs-fout-over-digital-scale-6-gsps-dac-sample-rate-channel-in.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 14. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C](ad9082/figures/ad9082-f015.png)

*Figure 14. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C*

![Figure 15. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B](ad9082/figures/ad9082-f016.png)

*Figure 15. HD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B*

Digitized data: [hd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-m.csv](ad9082/curves/hd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-m.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 16. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C](ad9082/figures/ad9082-f017.png)

*Figure 16. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C*

Digitized data: [sfdr-worst-spurious-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-in.csv](ad9082/curves/sfdr-worst-spurious-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-in.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 17. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B](ad9082/figures/ad9082-f018.png)

*Figure 17. SFDR, Worst Spurious vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B*

Digitized data: [sfdr-worst-spurious-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-i.csv](ad9082/curves/sfdr-worst-spurious-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-i.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 18. IMD3 vs. f_{OUT} over Digital Scale (Mode 17B), 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C, IMD3 is a Two-Tone](ad9082/figures/ad9082-f019.png)

*Figure 18. IMD3 vs. f_{OUT} over Digital Scale (Mode 17B), 6 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 4×, Mode 15C, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale*

Digitized data: [imd3-vs-fout-over-digital-scale-mode-17b-6-gsps-dac-sample-rate-channel-interpol.csv](ad9082/curves/imd3-vs-fout-over-digital-scale-mode-17b-6-gsps-dac-sample-rate-channel-interpol.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 19. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C, IMD3 is a Two-Tone Test,](ad9082/figures/ad9082-f020.png)

*Figure 19. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 8×, Mode 15C, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale*

Digitized data: [imd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-.csv](ad9082/curves/imd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-1-.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 20. IMD3 vs. f_{OUT} over f_{DAC}, Digital Scale -7 dBFS, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale](ad9082/figures/ad9082-f021.png)

*Figure 20. IMD3 vs. f_{OUT} over f_{DAC}, Digital Scale -7 dBFS, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale*

Digitized data: [imd3-vs-fout-over-fdac-digital-scale-7-dbfs-imd3-is-a-two-tone-test-and-the-scal.csv](ad9082/curves/imd3-vs-fout-over-fdac-digital-scale-7-dbfs-imd3-is-a-two-tone-test-and-the-scal.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 21. IMD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C, IMD3 is a Two-Tone Test,](ad9082/figures/ad9082-f022.png)

*Figure 21. IMD3 vs. f_{OUT} over Digital Scale, 9 GSPS DAC Sample Rate, Channel Interpolation 1×, Main Interpolation 6×, Mode 15C, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale*

Digitized data: [imd3-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-m.csv](ad9082/curves/imd3-vs-fout-over-digital-scale-9-gsps-dac-sample-rate-channel-interpolation-1-m.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 22. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B, IMD3 is a Two-Tone Test,](ad9082/figures/ad9082-f023.png)

*Figure 22. IMD3 vs. f_{OUT} over Digital Scale, 12 GSPS DAC Sample Rate, Channel Interpolation 4×, Main Interpolation 8×, Mode 16B, IMD3 is a Two-Tone Test, and the Scale per Tone is 6 dB Lower than the Reported Digital Scale*

Digitized data: [imd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-.csv](ad9082/curves/imd3-vs-fout-over-digital-scale-12-gsps-dac-sample-rate-channel-interpolation-4-.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 23. SFDR, Worst In-Band Spurious vs. f_{OUT} over f_{DAC}, with 0 dBFS Tone Level](ad9082/figures/ad9082-f024.png)

*Figure 23. SFDR, Worst In-Band Spurious vs. f_{OUT} over f_{DAC}, with 0 dBFS Tone Level*

Digitized data: [sfdr-worst-in-band-spurious-vs-fout-over-fdac-with-0-dbfs-tone-level.csv](ad9082/curves/sfdr-worst-in-band-spurious-vs-fout-over-fdac-with-0-dbfs-tone-level.csv) (x: MHz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 24. DAC0 Fundamental Output Power vs. f_{OUT} Across f_{DAC}, at 0 dBFS Digital Backoff, Measured on a Laboratory Evaluation Board, the AD9081-](ad9082/figures/ad9082-f025.png)

*Figure 24. DAC0 Fundamental Output Power vs. f_{OUT} Across f_{DAC}, at 0 dBFS Digital Backoff, Measured on a Laboratory Evaluation Board, the AD9081-FMCA-EBZ or AD9082-FMCA-EBZ Evaluation Board has a Different PCB 
ayout and Results in a Different Frequency Response when Compared to a
Laboratory Evaluation Board*

Digitized data: [dac0-fundamental-output-power-vs-fout-across-fdac-at-0-dbfs-digital-backoff-meas.csv](ad9082/curves/dac0-fundamental-output-power-vs-fout-across-fdac-at-0-dbfs-digital-backoff-meas.csv) (x: MHz; y: dBm) — values read off the printed plot by the digitizer, not published data.

![Figure 25. Single Sideband Phase Noise vs. Frequency Offset for Different Clock Input Power (P_{CLK}), f_{OUT} = 1.8 GHz, External 12 GHz Clock Input with Clock PLL Disabled](ad9082/figures/ad9082-f026.png)

*Figure 25. Single Sideband Phase Noise vs. Frequency Offset for Different Clock Input Power (P_{CLK}), f_{OUT} = 1.8 GHz, External 12 GHz Clock Input with Clock PLL Disabled*

Digitized data: [single-sideband-phase-noise-vs-frequency-offset-for-different-clock-input-power-.csv](ad9082/curves/single-sideband-phase-noise-vs-frequency-offset-for-different-clock-input-power-.csv) (x: Hz; y: dBc/Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 26. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, Shuffle On, 16-Bit Resolution, Mode 15C](ad9082/figures/ad9082-f027.png)

*Figure 26. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, Shuffle On, 16-Bit Resolution, Mode 15C*

Digitized data: [single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-over-fdac-shuffle-on-16-.csv](ad9082/curves/single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-over-fdac-shuffle-on-16-.csv) (x: MHz; y: dBc/Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 27. Single Sideband Phase Noise vs. Frequency Offset for Different PLL](ad9082/figures/ad9082-f028.png)

*Figure 27. Single Sideband Phase Noise vs. Frequency Offset for Different PLL Reference Clocks (f_{REF}), f_{OUT} = 1.8 GHz, f_{DAC} = 12 GSPS, PLL Enabled with Exception of External 12 GHz Clock Input with Clock PLL Disabled*

Digitized data: [single-sideband-phase-noise-vs-frequency-offset-for-different-pll.csv](ad9082/curves/single-sideband-phase-noise-vs-frequency-offset-for-different-pll.csv) (x: Hz; y: dBc/Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 28. Single Sideband Phase Noise vs. Frequency Offset for Different DAC Output Frequencies (f_{OUT}), External 12 GHz Clock Input with Clock PLL Disabled](ad9082/figures/ad9082-f029.png)

*Figure 28. Single Sideband Phase Noise vs. Frequency Offset for Different DAC Output Frequencies (f_{OUT}), External 12 GHz Clock Input with Clock PLL Disabled*

Digitized data: [single-sideband-phase-noise-vs-frequency-offset-for-different-dac-output-frequen.csv](ad9082/curves/single-sideband-phase-noise-vs-frequency-offset-for-different-dac-output-frequen.csv) (x: Hz; y: dBc/Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 29. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, 12-Bit Resolution, Shuffle On, Mode 24C](ad9082/figures/ad9082-f030.png)

*Figure 29. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT} over f_{DAC}, 12-Bit Resolution, Shuffle On, Mode 24C*

Digitized data: [single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-over-fdac-12-bit-resolut.csv](ad9082/curves/single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-over-fdac-12-bit-resolut.csv) (x: MHz; y: dBc/Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 30. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 16-Bit Resolution, Mode 15C](ad9082/figures/ad9082-f031.png)

*Figure 30. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 16-Bit Resolution, Mode 15C*

![Figure 31. Dual Band ACLR Performance for Two 20 MHz LTE carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (Refer to Figure 32 for a Wideband Plot), Showing a Close Up of One Carrier at f_{OUT} = 1.88 GHz, f_{DAC} = 11.796 GSPS, Test Vector PAR = 7.7 dB with −1 dBFS Backoff, Channel Interpolation 3×, Main Interpolation 8×, Mode 9C](ad9082/figures/ad9082-f032.png)

*Figure 31. Dual Band ACLR Performance for Two 20 MHz LTE carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (Refer to Figure 32 for a Wideband Plot), Showing a Close Up of One Carrier at f_{OUT} = 1.88 GHz, f_{DAC} = 11.796 GSPS, Test Vector PAR = 7.7 dB with −1 dBFS Backoff, Channel Interpolation 3×, Main Interpolation 8×, Mode 9C*

![Figure 32. Dual Band Wideband Plot for Two 20 MHz LTE Carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (3GPP Bands, B1 and B3, Respectively),](ad9082/figures/ad9082-f033.png)

*Figure 32. Dual Band Wideband Plot for Two 20 MHz LTE Carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (3GPP Bands, B1 and B3, Respectively), at f_{DAC} = 11.796 GSPS, Test Vector PAR = 7.7 dB with −1 dBFS Backoff, 
Channel Interpolation 3×, Main Interpolation 8×, Mode 9C*

![Figure 33. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 12-Bit Resolution, Mode 24C](ad9082/figures/ad9082-f034.png)

*Figure 33. Single-Tone NSD Measured at 10% Offset from f_{OUT} vs. f_{OUT}, Shuffle Off vs. Shuffle On, f_{DAC} = 11796.48 MSPS, 12-Bit Resolution, Mode 24C*

Digitized data: [single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-shuffle-off-vs-shuffle-o.csv](ad9082/curves/single-tone-nsd-measured-at-10-offset-from-fout-vs-fout-shuffle-off-vs-shuffle-o.csv) (x: MHz; y: dBc/Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 34. Dual Band ACLR Performance for two 20 MHz LTE carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (Refer to Figure 32 for a Wideband Plot),](ad9082/figures/ad9082-f035.png)

*Figure 34. Dual Band ACLR Performance for two 20 MHz LTE carriers at f_{OUT} = 1.88 GHz and f_{OUT} = 2.145 GHz (Refer to Figure 32 for a Wideband Plot), Showing a Close Up of One Carrier at f_{OUT] = 2.145 GHz, f_{DAC} = 11.796 GSPS, Test Vector PAR = 7.7 dB with −1 dBFS Backoff, Channel Interpolation 3×, Main Interpolation 8×, Mode 9C*

![Figure 35. ACLR Performance for 100 MHz 5G Test Vector at f_{OUT} = 3.9 GHz](ad9082/figures/ad9082-f036.png)

*Figure 35. ACLR Performance for 100 MHz 5G Test Vector at f_{OUT} = 3.9 GHz and f_{DAC} = 11.898 GSPS, Test Vector Peak to RMS = 11.7 dB with −1 dBFS 
Backoff (Mode 9C), Channel Interpolation 3×, Main Interpolation 8×*

### ADC

Nominal supplies, sampling rate = 6 GSPS with DAC clock frequency (f_{CLK}) = 12 GHz direct RF clock, full bandwidth mode operation (no decimation), T_{J} = 80°C (T_{A} = 25°C), 128k FFT sample with five averages, and A_{IN} = -1 dBFS, unless otherwise noted.

![Figure 36. Single-Tone FFT at f_{IN} = 450 MHz](ad9082/figures/ad9082-f037.png)

*Figure 36. Single-Tone FFT at f_{IN} = 450 MHz*

![Figure 37. Single-Tone FFT at f_{IN} = 900 MHz](ad9082/figures/ad9082-f038.png)

*Figure 37. Single-Tone FFT at f_{IN} = 900 MHz*

![Figure 38. Single-Tone FFT at f_{IN} = 1.8 GHz](ad9082/figures/ad9082-f039.png)

*Figure 38. Single-Tone FFT at f_{IN} = 1.8 GHz*

![Figure 39. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 450 MHz](ad9082/figures/ad9082-f040.png)

*Figure 39. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 450 MHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-450-mhz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-450-mhz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 40. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 900 MHz](ad9082/figures/ad9082-f041.png)

*Figure 40. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 900 MHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-900-mhz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-900-mhz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 41. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 1.8 GHz](ad9082/figures/ad9082-f042.png)

*Figure 41. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 1.8 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-1-8-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-1-8-ghz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 42. Single-Tone FFT at f_{IN} = 2.7 GHz](ad9082/figures/ad9082-f043.png)

*Figure 42. Single-Tone FFT at f_{IN} = 2.7 GHz*

![Figure 43. Single-Tone FFT at f_{IN} = 3.6 GHz](ad9082/figures/ad9082-f044.png)

*Figure 43. Single-Tone FFT at f_{IN} = 3.6 GHz*

![Figure 44. Single-Tone FFT at f_{IN} = 4.5 GHz](ad9082/figures/ad9082-f045.png)

*Figure 44. Single-Tone FFT at f_{IN} = 4.5 GHz*

![Figure 45. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 2.7 GHz](ad9082/figures/ad9082-f046.png)

*Figure 45. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 2.7 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-2-7-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-2-7-ghz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 46. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 3.6 GHz](ad9082/figures/ad9082-f047.png)

*Figure 46. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 3.6 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-3-6-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-3-6-ghz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 47. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 4.5 GHz](ad9082/figures/ad9082-f048.png)

*Figure 47. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 4.5 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-4-5-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-4-5-ghz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 48. Single-Tone FFT at f_{IN} = 5.4 GHz](ad9082/figures/ad9082-f049.png)

*Figure 48. Single-Tone FFT at f_{IN} = 5.4 GHz*

![Figure 49. Single-Tone FFT at f_{IN} = 6.3 GHz](ad9082/figures/ad9082-f050.png)

*Figure 49. Single-Tone FFT at f_{IN} = 6.3 GHz*

![Figure 50. Single-Tone FFT at f_{IN} = 7.2 GHz](ad9082/figures/ad9082-f051.png)

*Figure 50. Single-Tone FFT at f_{IN} = 7.2 GHz*

![Figure 51. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 5.4 GHz](ad9082/figures/ad9082-f052.png)

*Figure 51. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 5.4 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-5-4-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-5-4-ghz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 52. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 6.3 GHz](ad9082/figures/ad9082-f053.png)

*Figure 52. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 6.3 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-6-3-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-6-3-ghz.csv) (x: dBFS; y: dBc and dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 53. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 7.2 GHz](ad9082/figures/ad9082-f054.png)

*Figure 53. Single-Tone SFDR and SNR vs. A_{IN} at f_{IN} = 7.2 GHz*

Digitized data: [single-tone-sfdr-and-snr-vs-ain-at-fin-7-2-ghz.csv](ad9082/curves/single-tone-sfdr-and-snr-vs-ain-at-fin-7-2-ghz.csv) (x: dBFS; y: dBc AND dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 54. Two-Tone FFT, f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz, and A_{IN1} and A_{IN2} = -7 dBFS (Note That IMD3L and IMD3H Are the Lower and Higher IMD3 Product Components in dBFS)](ad9082/figures/ad9082-f055.png)

*Figure 54. Two-Tone FFT, f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz, and A_{IN1} and A_{IN2} = -7 dBFS (Note That IMD3L and IMD3H Are the Lower and Higher IMD3 Product Components in dBFS)*

![Figure 55. Two-Tone FFT, f_{IN1} = 2.675 GHz, f_{IN2} = 2.725 GHz, and A_{IN1} and A_{IN2} = -7 dBFS](ad9082/figures/ad9082-f056.png)

*Figure 55. Two-Tone FFT, f_{IN1} = 2.675 GHz, f_{IN2} = 2.725 GHz, and A_{IN1} and A_{IN2} = -7 dBFS*

![Figure 56. Two-Tone FFT, f_{IN1} = 3.575 GHz, f_{IN2} = 3.625 GHz, and A_{IN1} and A_{IN2} = -7 dBFS](ad9082/figures/ad9082-f057.png)

*Figure 56. Two-Tone FFT, f_{IN1} = 3.575 GHz, f_{IN2} = 3.625 GHz, and A_{IN1} and A_{IN2} = -7 dBFS*

![Figure 57. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz](ad9082/figures/ad9082-f058.png)

*Figure 57. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 1.775 GHz, f_{IN2} = 1.825 GHz*

Digitized data: [two-tone-imd3-vs-ain-with-fin1-1-775-ghz-fin2-1-825-ghz.csv](ad9082/curves/two-tone-imd3-vs-ain-with-fin1-1-775-ghz-fin2-1-825-ghz.csv) (x: dBFS; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 58. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 2.675 GHz and f_{IN2} = 2.725 GHz](ad9082/figures/ad9082-f059.png)

*Figure 58. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 2.675 GHz and f_{IN2} = 2.725 GHz*

Digitized data: [two-tone-imd3-vs-ain-with-fin1-2-675-ghz-and-fin2-2-725-ghz.csv](ad9082/curves/two-tone-imd3-vs-ain-with-fin1-2-675-ghz-and-fin2-2-725-ghz.csv) (x: dBFS; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 59. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 3.575 GHz and f_{IN2} = 3.625 GHz](ad9082/figures/ad9082-f060.png)

*Figure 59. Two-Tone IMD3 vs. A_{IN} with f_{IN1} = 3.575 GHz and f_{IN2} = 3.625 GHz*

Digitized data: [two-tone-imd3-vs-ain-with-fin1-3-575-ghz-and-fin2-3-625-ghz.csv](ad9082/curves/two-tone-imd3-vs-ain-with-fin1-3-575-ghz-and-fin2-3-625-ghz.csv) (x: dBFS; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 60. Two-Tone FFT, f_{IN1} = 5.375 GHz, f_{IN2} = 5.425 GHz, and A_{IN1} and A_{IN2} = -7 dBFS](ad9082/figures/ad9082-f061.png)

*Figure 60. Two-Tone FFT, f_{IN1} = 5.375 GHz, f_{IN2} = 5.425 GHz, and A_{IN1} and A_{IN2} = -7 dBFS*

![Figure 61. SNR vs. Frequency with A_{IN} =-1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz](ad9082/figures/ad9082-f062.png)

*Figure 61. SNR vs. Frequency with A_{IN} =-1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz*

Digitized data: [snr-vs-frequency-with-ain-1-dbfs-between-direct-external-rf-clock-6-ghz-and-pll-.csv](ad9082/curves/snr-vs-frequency-with-ain-1-dbfs-between-direct-external-rf-clock-6-ghz-and-pll-.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 62. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS](ad9082/figures/ad9082-f063.png)

*Figure 62. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS*

![Figure 63. Two-Tone IMD3 vs. Input Amplitude with f_{IN1} = 5.375 GHz and f_{IN2} = 5.425 GHz](ad9082/figures/ad9082-f064.png)

*Figure 63. Two-Tone IMD3 vs. Input Amplitude with f_{IN1} = 5.375 GHz and f_{IN2} = 5.425 GHz*

Digitized data: [two-tone-imd3-vs-input-amplitude-with-fin1-5-375-ghz-and-fin2-5-425-ghz.csv](ad9082/curves/two-tone-imd3-vs-input-amplitude-with-fin1-5-375-ghz-and-fin2-5-425-ghz.csv) (x: dBFS; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 64. SFDR vs. Frequency with A_{IN} = -1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz](ad9082/figures/ad9082-f065.png)

*Figure 64. SFDR vs. Frequency with A_{IN} = -1 dBFS Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz*

Digitized data: [sfdr-vs-frequency-with-ain-1-dbfs-between-direct-external-rf-clock-6-ghz-and-pll.csv](ad9082/curves/sfdr-vs-frequency-with-ain-1-dbfs-between-direct-external-rf-clock-6-ghz-and-pll.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 65. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -9 dBFS](ad9082/figures/ad9082-f066.png)

*Figure 65. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -9 dBFS*

Digitized data: [harmonics-hd2-and-hd3-vs-frequency-with-ain-9-dbfs.csv](ad9082/curves/harmonics-hd2-and-hd3-vs-frequency-with-ain-9-dbfs.csv) — values read off the printed plot by the digitizer, not published data.

![Figure 66. SNR vs. Frequency with A_{IN} = -1 dBFS](ad9082/figures/ad9082-f067.png)

*Figure 66. SNR vs. Frequency with A_{IN} = -1 dBFS*

Digitized data: [snr-vs-frequency-with-ain-1-dbfs.csv](ad9082/curves/snr-vs-frequency-with-ain-1-dbfs.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 67. SNR vs. Frequency with A_{IN} = -1 dBFS with DAC On/Off and PLL On/Off Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz](ad9082/figures/ad9082-f068.png)

*Figure 67. SNR vs. Frequency with A_{IN} = -1 dBFS with DAC On/Off and PLL On/Off Between Direct External RF Clock = 6 GHz and PLL Clock Multiplier Enabled with Reference Input of 125 MHz*

Digitized data: [snr-vs-frequency-with-ain-1-dbfs-with-dac-on-off-and-pll-on-off-between-direct-e.csv](ad9082/curves/snr-vs-frequency-with-ain-1-dbfs-with-dac-on-off-and-pll-on-off-between-direct-e.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 68. Measured ADC Input Bandwidth on the AD9082-FMCA-EBZ (No Matching Network)](ad9082/figures/ad9082-f069.png)

*Figure 68. Measured ADC Input Bandwidth on the AD9082-FMCA-EBZ (No Matching Network)*

Digitized data: [measured-adc-input-bandwidth-on-the-ad9082-fmca-ebz-no-matching-network.csv](ad9082/curves/measured-adc-input-bandwidth-on-the-ad9082-fmca-ebz-no-matching-network.csv) (x: GHz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 69. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS](ad9082/figures/ad9082-f070.png)

*Figure 69. Harmonics (HD2 and HD3) vs. Frequency with A_{IN} = -1 dBFS*

Digitized data: [harmonics-hd2-and-hd3-vs-frequency-with-ain-1-dbfs.csv](ad9082/curves/harmonics-hd2-and-hd3-vs-frequency-with-ain-1-dbfs.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 70. HD2 and HD3 vs. Sample Frequency (f_{S}), f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS](ad9082/figures/ad9082-f071.png)

*Figure 70. HD2 and HD3 vs. Sample Frequency (f_{S}), f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS*

Digitized data: [hd2-and-hd3-vs-sample-frequency-fs-fin-450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv](ad9082/curves/hd2-and-hd3-vs-sample-frequency-fs-fin-450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 71. SNR and SFDR vs. Sample Frequency, f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS](ad9082/figures/ad9082-f072.png)

*Figure 71. SNR and SFDR vs. Sample Frequency, f_{IN} = 450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS*

Digitized data: [snr-and-sfdr-vs-sample-frequency-fin-450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv](ad9082/curves/snr-and-sfdr-vs-sample-frequency-fin-450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 72. SFDR and SNR vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS](ad9082/figures/ad9082-f073.png)

*Figure 72. SFDR and SNR vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS*

Digitized data: [sfdr-and-snr-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv](ad9082/curves/sfdr-and-snr-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv) (x: °C; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 73. Power vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS](ad9082/figures/ad9082-f074.png)

*Figure 73. Power vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS*

Digitized data: [power-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv](ad9082/curves/power-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv) (x: °C; y: A) — values read off the printed plot by the digitizer, not published data.

![Figure 74. HD2 and HD3 vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS](ad9082/figures/ad9082-f075.png)

*Figure 74. HD2 and HD3 vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS*

Digitized data: [hd2-and-hd3-vs-sample-frequency-fin-3450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv](ad9082/curves/hd2-and-hd3-vs-sample-frequency-fin-3450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 75. Harmonics vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS](ad9082/figures/ad9082-f076.png)

*Figure 75. Harmonics vs. Die Temperature, f_{IN}= 1.8 GHz, A_{IN} = -1 dBFS*

Digitized data: [harmonics-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv](ad9082/curves/harmonics-vs-die-temperature-fin-1-8-ghz-ain-1-dbfs.csv) (x: °C; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 76. SNR and SFDR vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS](ad9082/figures/ad9082-f077.png)

*Figure 76. SNR and SFDR vs. Sample Frequency, f_{IN} = 3450 MHz, A_{IN} = -1 dBFS, f_{S} = 2 GSPS to 6 GSPS*

Digitized data: [snr-and-sfdr-vs-sample-frequency-fin-3450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv](ad9082/curves/snr-and-sfdr-vs-sample-frequency-fin-3450-mhz-ain-1-dbfs-fs-2-gsps-to-6-gsps.csv) (x: MHz; y: dBFS) — values read off the printed plot by the digitizer, not published data.

![Figure 77. Input Referred Noise Histogram](ad9082/figures/ad9082-f078.png)

*Figure 77. Input Referred Noise Histogram*

### THEORY OF OPERATION

The AD9082 is a highly integrated, 28 nm, RF, MxFE featuring four 16-bit, 12 GSPS DAC cores and two 12-bit, 6 GSPS ADC cores (see Figure 1). The DAC core is based on a current segmentation architecture providing a differential complementary current output with an adjustable I_{OUTFS} range of 6.43 mA to 37.75 mA. The ADC core is based on a proprietary interleaved architecture that suppresses residual interleaving spurious products into the noise floor. To enable wide bandwidth operation, a high linearity 100 Ω differential buffer with overload protection is used to isolate the ADC core from the RF ADC driver source. An on-chip clock multiplier can be used to synthesize the RF DAC and ADC clocks or, alternatively, an external clock can be applied.

Flexible transmit and receive DSP paths are available to up and down sample the desired intermediate frequency (IF) or RF signal(s) to manageable data interface rates aligned with bandwidth requirements. The transmit and receive DSP paths are symmetric and consist of four CDUC and CDDC blocks in the main datapath along with eight FDUC and FDDC blocks in the channelizer datapath. Each block includes a 48-bit NCO configurable for integer or fractional mode of operation. The channelizer datapath enables an efficient implementation to support multiband applications where up to eight RF bands can be supported. Each of the DUC and DDC blocks are bypassable and offer flexible interpolating and decimation factors. The NCO in each block also supports coherent frequency hopping.

Additional features are also included in the receive and transmit datapaths as well as elsewhere to facilitate system integration. Both datapaths include adjustable delay lines to compensate for mismatch in channel delay paths that may occur external to the device. The transmit datapath includes digital gain control, fine delay adjust, and power amplifier protection to simplify DPD integration in a multiband transmitter. The receive path includes a flexible programmable 192-tap finite impulse response (PFIR) filter. The filter can be allocated across one or more ADCs for receive equalization with support for four different profiles. These profiles can be selected using the GPIOx pins. The receive datapath also includes a fast and slow signal detection capability in support of automatic gain control (AGC). Transmit and receive data formatting can be real or complex with resolutions of 8, 12, 16, and 24 bits depending on the JESD204B or the JESD204C mode. The AD9082 also allows complete bypass of the transmit and receive DSP paths enabling Nyquist operation.

The device also supports fast frequency hopping via GPIOx and a low latency digital loopback capability. An on-chip TMU is also included and can be used as part of a thermal management solution. Power savings option in support of time division duplex (TDD) applications are included.

A 16-lane JESD204 transceiver port is available to support the high data throughput rates on the receive and transmit datapaths. Eight SERDES lanes are designated for the transmit datapaths, whereas the other 8 lanes are designated for the receive datapaths with the option to support two links. The transceiver port supports JESD204C up to 24.75 Gbps or JESD204B up to 15.5 Gbps lane rates. The JESD204 data link layer is highly flexible allowing optimization of the lane count (or rate) required to support a target throughput rate. Internal synchronization for deterministic latency and phase alignment as well as multichip synchronization are possible via an external alignment signal (SYSREF).

### OUTLINE DIMENSIONS

![Figure 78. 324-Ball Ball Grid Array, Thermally Enhanced (BGA_ED) (BP-324-3)](ad9082/figures/ad9082-f079.png)

COMPLIANT TO JEDEC STANDARDS MO-275-KKAB-1

*Figure 78. 324-Ball Ball Grid Array, Thermally Enhanced [BGA_ED] (BP-324-3) Dimensions shown in millimeters*

### ORDERING GUIDE

**Ordering Guide** ([table-21-p36-data.csv](ad9082/tables/table-21-p36-data.csv), p. 36)

| Model[^1] | Temperature Range[^2] | Package Description | Packing Quantity | Package Option |
|---|---|---|---|---|
| AD9082BBPZ-4D2AC | −40°C to +120°C | 324-Ball BGA_ED | Tray, 126 | BP-324-3 |
| AD9082BBPZRL-4D2AC | −40°C to +120°C | 324-Ball BGA_ED | Reel, 1000 | BP-324-3 |
| AD9082BBPZ-2D2AC | −40°C to +120°C | 324-Ball BGA_ED | Tray, 126 | BP-324-3 |
| AD9082BBPZRL-2D2AC | −40°C to +120°C | 324-Ball BGA_ED | Reel, 1000 | BP-324-3 |
| AD9082-FMCA-EBZ |  | AD9082 Evaluation Board with High Performance Analog Network |  |  |

- **Note 1:** Z = RoHS Compliant Part.
- **Note 2:** Specified operating junction temperature (T_{J}).
