---
type: Analog Component
title: "AD8421 — 3 nV/√Hz, Low Power Instrumentation Amplifier"
description: "3 nV/√Hz, Low Power Instrumentation Amplifier"
resource: "https://www.analog.com/en/products/ad8421.html"
tags: ["datasheet", "adi"]
status: draft
sources:
  - id: "datasheet"
    resource: "https://www.analog.com/media/en/technical-documentation/data-sheets/ad8421.pdf"
    title: "AD8421 data sheet"
    author: "team:analog-devices"
    last_modified: "10/20"
tables:
  - file: "ad8421/tables/table-00-p3-spec.csv"
    title: "Table 1. (AR and BR Grades Specifications)"
    page: 3
  - file: "ad8421/tables/table-01-p5-spec.csv"
    title: "Table 2. (ARM and BRM Grades Specifications)"
    page: 5
  - file: "ad8421/tables/table-02-p7-spec.csv"
    title: "Table 3. (ACP Grade Specifications)"
    page: 7
  - file: "ad8421/tables/table-03-p10-abs_max.csv"
    title: "Table 4. (Absolute Maximum Ratings)"
    page: 10
  - file: "ad8421/tables/table-04-p10-data.csv"
    title: "Table 5. (Thermal Resistance)"
    page: 10
  - file: "ad8421/tables/table-05-p11-pin.csv"
    title: "Table 6. Pin Function Descriptions"
    page: 11
  - file: "ad8421/tables/table-06-p22-data.csv"
    title: "Table 7. Gains Achieved Using 1% Resistors"
    page: 22
  - file: "ad8421/tables/table-07-p30-data.csv"
    title: "Ordering Guide"
    page: 30
figures:
  - file: "ad8421/figures/ad8421-f075-01.png"
    caption: "Figure 74. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body"
    type: "other"
    page: 29
  - file: "ad8421/figures/ad8421-f075-02.png"
    caption: "Figure 75. 8-Lead Mini Small Outline Package [MSOP]"
    type: "other"
    page: 29
  - file: "ad8421/figures/ad8421-f075-03.png"
    caption: ""
    type: "other"
    page: 29
  - file: "ad8421/figures/ad8421-f001.png"
    caption: "Figure 1. AD8421 Driving 16-Bit AD7685"
    type: "application_circuit"
    page: 1
  - file: "ad8421/figures/ad8421-f002.png"
    caption: "Figure 2. Noise Density vs. Source Resistance"
    type: "characteristic_curve"
    page: 1
  - file: "ad8421/figures/ad8421-f004.png"
    caption: "Figure 3. 8-Lead SOIC and 8-Lead MSOP Pin Configuration"
    type: "pinout"
    page: 11
  - file: "ad8421/figures/ad8421-f005.png"
    caption: "Figure 4. 8-Lead LFCSP Pin Configuration"
    type: "pinout"
    page: 11
  - file: "ad8421/figures/ad8421-f006.png"
    caption: "Figure 5. Typical Distribution of Input Offset Voltage"
    type: "characteristic_curve"
    page: 12
  - file: "ad8421/figures/ad8421-f007.png"
    caption: "Figure 6. Typical Distribution of Input Bias Current"
    type: "characteristic_curve"
    page: 12
  - file: "ad8421/figures/ad8421-f008.png"
    caption: "Figure 7. Typical Distribution of PSRR (G = 1)"
    type: "characteristic_curve"
    page: 12
  - file: "ad8421/figures/ad8421-f009.png"
    caption: "Figure 8. Typical Distribution of Output Offset Voltage"
    type: "characteristic_curve"
    page: 12
  - file: "ad8421/figures/ad8421-f010.png"
    caption: "Figure 9. Typical Distribution of Input Offset Current"
    type: "characteristic_curve"
    page: 12
  - file: "ad8421/figures/ad8421-f011.png"
    caption: "Figure 10. Typical Distribution of CMRR (G = 1)"
    type: "characteristic_curve"
    page: 12
  - file: "ad8421/figures/ad8421-f012.png"
    caption: "Figure 11. Input Common-Mode Voltage vs. Output Voltage; VS = ±12 V and ±15 V (G = 1)"
    type: "characteristic_curve"
    page: 13
  - file: "ad8421/figures/ad8421-f013.png"
    caption: "Figure 12. Input Common-Mode Voltage vs. Output Voltage; VS = ±2.5 V and ±5 V (G = 1)"
    type: "characteristic_curve"
    page: 13
  - file: "ad8421/figures/ad8421-f014.png"
    caption: "Figure 13. Input Common-Mode Voltage vs. Output Voltage; VS = ±12 V and ±15 V (G = 100)"
    type: "characteristic_curve"
    page: 13
  - file: "ad8421/figures/ad8421-f015.png"
    caption: "Figure 14. Input Common-Mode Voltage vs. Output Voltage; VS = ±2.5 V and ±5 V (G = 100)"
    type: "characteristic_curve"
    page: 13
  - file: "ad8421/figures/ad8421-f016.png"
    caption: "Figure 15. Input Overvoltage Performance; G = 1, +VS = 5 V, -VS = 0 V"
    type: "characteristic_curve"
    page: 13
  - file: "ad8421/figures/ad8421-f017.png"
    caption: "Figure 16. Input Overvoltage Performance; G = 1, VS = ±15 V"
    type: "characteristic_curve"
    page: 13
  - file: "ad8421/figures/ad8421-f018.png"
    caption: "Figure 17. Input Overvoltage Performance; +VS = 5 V, -VS = 0 V, G = 100"
    type: "characteristic_curve"
    page: 14
  - file: "ad8421/figures/ad8421-f019.png"
    caption: "Figure 18. Input Overvoltage Performance; VS = ±15 V, G = 100"
    type: "characteristic_curve"
    page: 14
  - file: "ad8421/figures/ad8421-f020.png"
    caption: "Figure 19. Input Bias Current vs. Common-Mode Voltage"
    type: "characteristic_curve"
    page: 14
  - file: "ad8421/figures/ad8421-f021.png"
    caption: "Figure 20. Positive PSRR vs. Frequency"
    type: "characteristic_curve"
    page: 14
  - file: "ad8421/figures/ad8421-f022.png"
    caption: "Figure 21. Negative PSRR vs. Frequency"
    type: "characteristic_curve"
    page: 14
  - file: "ad8421/figures/ad8421-f023.png"
    caption: "Figure 22. Gain vs. Frequency"
    type: "characteristic_curve"
    page: 14
  - file: "ad8421/figures/ad8421-f024.png"
    caption: "Figure 23. CMRR vs. Frequency"
    type: "characteristic_curve"
    page: 15
  - file: "ad8421/figures/ad8421-f025.png"
    caption: "Figure 24. CMRR vs. Frequency, 1 kΩ Source Imbalance"
    type: "characteristic_curve"
    page: 15
  - file: "ad8421/figures/ad8421-f026.png"
    caption: "Figure 25. Change in Input Offset Voltage (VOSI) vs. Warm-Up Time"
    type: "characteristic_curve"
    page: 15
  - file: "ad8421/figures/ad8421-f027.png"
    caption: "Figure 26. Input Bias Current vs. Temperature"
    type: "characteristic_curve"
    page: 15
  - file: "ad8421/figures/ad8421-f028.png"
    caption: "Figure 27. Gain vs. Temperature (G = 1)"
    type: "characteristic_curve"
    page: 15
  - file: "ad8421/figures/ad8421-f029.png"
    caption: "Figure 28. CMRR vs. Temperature (G = 1)"
    type: "characteristic_curve"
    page: 15
  - file: "ad8421/figures/ad8421-f030.png"
    caption: "Figure 29. Supply Current vs. Temperature (G = 1)"
    type: "characteristic_curve"
    page: 16
  - file: "ad8421/figures/ad8421-f031.png"
    caption: "Figure 30. Short-Circuit Current vs. Temperature (G = 1)"
    type: "characteristic_curve"
    page: 16
  - file: "ad8421/figures/ad8421-f032.png"
    caption: "Figure 31. Slew Rate vs. Temperature, VS = ±15 V (G = 1)"
    type: "characteristic_curve"
    page: 16
  - file: "ad8421/figures/ad8421-f033.png"
    caption: "Figure 32. Slew Rate vs. Temperature, VS = ±5 V (G = 1)"
    type: "characteristic_curve"
    page: 16
  - file: "ad8421/figures/ad8421-f034.png"
    caption: "Figure 33. Input Voltage Limit vs. Supply Voltage"
    type: "characteristic_curve"
    page: 16
  - file: "ad8421/figures/ad8421-f035.png"
    caption: "Figure 34. Output Voltage Swing vs. Supply Voltage, RL = 10 kΩ"
    type: "characteristic_curve"
    page: 16
  - file: "ad8421/figures/ad8421-f036.png"
    caption: "Figure 35. Output Voltage Swing vs. Supply Voltage, RL = 600 Ω"
    type: "characteristic_curve"
    page: 17
  - file: "ad8421/figures/ad8421-f037.png"
    caption: "Figure 36. Output Voltage Swing vs. Load Resistance"
    type: "characteristic_curve"
    page: 17
  - file: "ad8421/figures/ad8421-f038.png"
    caption: "Figure 37. Output Voltage Swing vs. Output Current"
    type: "characteristic_curve"
    page: 17
  - file: "ad8421/figures/ad8421-f039.png"
    caption: "Figure 38. Gain Nonlinearity (G = 1), RL = 10 kΩ, 2 kΩ"
    type: "characteristic_curve"
    page: 17
  - file: "ad8421/figures/ad8421-f040.png"
    caption: "Figure 39. Gain Nonlinearity (G = 1), RL = 600 Ω"
    type: "characteristic_curve"
    page: 17
  - file: "ad8421/figures/ad8421-f041.png"
    caption: "Figure 40. Gain Nonlinearity (G = 1000), RL = 600 Ω, VOUT = ±10 V"
    type: "characteristic_curve"
    page: 17
  - file: "ad8421/figures/ad8421-f042.png"
    caption: "Figure 41. Gain Nonlinearity (G = 1000), RL = 600 Ω, VOUT = ±5 V"
    type: "characteristic_curve"
    page: 18
  - file: "ad8421/figures/ad8421-f043.png"
    caption: "Figure 42. RTI Voltage Noise Spectral Density vs. Frequency"
    type: "characteristic_curve"
    page: 18
  - file: "ad8421/figures/ad8421-f044.png"
    caption: "Figure 43. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1, G = 1000)"
    type: "scope_capture"
    page: 18
  - file: "ad8421/figures/ad8421-f045.png"
    caption: "Figure 44. Current Noise Spectral Density vs. Frequency"
    type: "characteristic_curve"
    page: 18
  - file: "ad8421/figures/ad8421-f046.png"
    caption: "Figure 45. 0.1 Hz to 10 Hz Current Noise"
    type: "scope_capture"
    page: 18
  - file: "ad8421/figures/ad8421-f047.png"
    caption: "Figure 46. Large Signal Frequency Response"
    type: "characteristic_curve"
    page: 18
  - file: "ad8421/figures/ad8421-f048.png"
    caption: "Figure 47. Large Signal Pulse Response and Settling Time (G = 1), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF"
    type: "scope_capture"
    page: 19
  - file: "ad8421/figures/ad8421-f049.png"
    caption: "Figure 48. Large Signal Pulse Response and Settling Time (G = 10), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF"
    type: "scope_capture"
    page: 19
  - file: "ad8421/figures/ad8421-f050.png"
    caption: "Figure 49. Large Signal Pulse Response and Settling Time (G = 100), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF"
    type: "scope_capture"
    page: 19
  - file: "ad8421/figures/ad8421-f051.png"
    caption: "Figure 50. Large Signal Pulse Response and Settling Time (G = 1000), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF"
    type: "scope_capture"
    page: 19
  - file: "ad8421/figures/ad8421-f052.png"
    caption: "Figure 51. Settling Time vs. Step Size (G = 1), RL = 2 kΩ, CL = 100 pF"
    type: "characteristic_curve"
    page: 19
  - file: "ad8421/figures/ad8421-f053.png"
    caption: "Figure 52. Small Signal Pulse Response (G = 1), RL = 600 Ω, CL = 100 pF"
    type: "scope_capture"
    page: 19
  - file: "ad8421/figures/ad8421-f054.png"
    caption: "Figure 53. Small Signal Pulse Response (G = 10), RL = 600 Ω, CL = 100 pF"
    type: "scope_capture"
    page: 20
  - file: "ad8421/figures/ad8421-f055.png"
    caption: "Figure 54. Small Signal Pulse Response (G = 100), RL = 600 Ω, CL = 100 pF"
    type: "scope_capture"
    page: 20
  - file: "ad8421/figures/ad8421-f056.png"
    caption: "Figure 55. Small Signal Pulse Response (G = 1000), RL = 600 Ω, CL = 100 pF"
    type: "scope_capture"
    page: 20
  - file: "ad8421/figures/ad8421-f057.png"
    caption: "Figure 56. Small Signal Response with Various Capacitive Loads (G = 1), RL = Infinity"
    type: "scope_capture"
    page: 20
  - file: "ad8421/figures/ad8421-f058.png"
    caption: "Figure 57. Second Harmonic Distortion vs. Frequency (G = 1)"
    type: "characteristic_curve"
    page: 20
  - file: "ad8421/figures/ad8421-f059.png"
    caption: "Figure 58. Third Harmonic Distortion vs. Frequency (G = 1)"
    type: "characteristic_curve"
    page: 20
  - file: "ad8421/figures/ad8421-f060.png"
    caption: "Figure 59. Second Harmonic Distortion vs. Frequency (G = 1000)"
    type: "characteristic_curve"
    page: 21
  - file: "ad8421/figures/ad8421-f061.png"
    caption: "Figure 60. Third Harmonic Distortion vs. Frequency (G = 1000)"
    type: "characteristic_curve"
    page: 21
  - file: "ad8421/figures/ad8421-f062.png"
    caption: "Figure 61. THD vs. Frequency"
    type: "characteristic_curve"
    page: 21
  - file: "ad8421/figures/ad8421-f063.png"
    caption: "Figure 62. Simplified Schematic"
    type: "block_diagram"
    page: 22
  - file: "ad8421/figures/ad8421-f064.png"
    caption: "Figure 63. Driving the Reference Pin"
    type: "application_circuit"
    page: 23
  - file: "ad8421/figures/ad8421-f065.png"
    caption: "Figure 64. Pin Configuration Diagram"
    type: "pinout"
    page: 23
  - file: "ad8421/figures/ad8421-f066.png"
    caption: "Figure 65. Supply Decoupling, REF, and Output Referred to Local Ground"
    type: "application_circuit"
    page: 23
  - file: "ad8421/figures/ad8421-f067.png"
    caption: "Figure 66. Creating an Input Bias Current Return Path"
    type: "application_circuit"
    page: 24
  - file: "ad8421/figures/ad8421-f068.png"
    caption: "Figure 67. Typical Application; No Input Protection Required"
    type: "application_circuit"
    page: 24
  - file: "ad8421/figures/ad8421-f069.png"
    caption: "Figure 68. Input Protection Options for Input Voltages Beyond Absolute Maximum Ratings"
    type: "application_circuit"
    page: 24
  - file: "ad8421/figures/ad8421-f070.png"
    caption: "Figure 69. RFI Suppression"
    type: "application_circuit"
    page: 25
  - file: "ad8421/figures/ad8421-f071.png"
    caption: "Figure 70. Source Resistance from Sensor and Protection Resistors"
    type: "application_circuit"
    page: 25
  - file: "ad8421/figures/ad8421-f072.png"
    caption: "Figure 71. Differential Output Configuration with Op Amp"
    type: "application_circuit"
    page: 27
  - file: "ad8421/figures/ad8421-f073.png"
    caption: "Figure 72. AD8421 Driving 16-Bit AD7685"
    type: "application_circuit"
    page: 28
  - file: "ad8421/figures/ad8421-f074.png"
    caption: "Figure 73. Typical Spectrum of the AD8421 (G = 10) Driving the AD7685"
    type: "characteristic_curve"
    page: 28
  - file: "ad8421/figures/ad8421-eq01.png"
    caption: "Equation as printed (p. 22)"
    type: equation
    page: 22
  - file: "ad8421/figures/ad8421-eq03.png"
    caption: "Equation as printed (p. 22)"
    type: equation
    page: 22
  - file: "ad8421/figures/ad8421-eq04.png"
    caption: "Equation as printed (p. 23)"
    type: equation
    page: 23
  - file: "ad8421/figures/ad8421-eq05.png"
    caption: "Equation as printed (p. 25)"
    type: equation
    page: 25
  - file: "ad8421/figures/ad8421-eq07.png"
    caption: "Equation as printed (p. 25)"
    type: equation
    page: 25
  - file: "ad8421/figures/ad8421-eq08.png"
    caption: "Equation as printed (p. 26)"
    type: equation
    page: 26
  - file: "ad8421/figures/ad8421-eq10.png"
    caption: "Equation as printed (p. 26)"
    type: equation
    page: 26
  - file: "ad8421/figures/ad8421-eq11.png"
    caption: "Equation as printed (p. 26)"
    type: equation
    page: 26
  - file: "ad8421/figures/ad8421-eq09.png"
    caption: "Equation as printed (p. 26)"
    type: equation
    page: 26
  - file: "ad8421/figures/ad8421-eq13.png"
    caption: "Equation as printed (p. 27)"
    type: equation
    page: 27
  - file: "ad8421/figures/ad8421-eq14.png"
    caption: "Equation as printed (p. 27)"
    type: equation
    page: 27
  - file: "ad8421/figures/ad8421-eq15.png"
    caption: "Equation as printed (p. 27)"
    type: equation
    page: 27
  - file: "ad8421/figures/ad8421-eq06.png"
    caption: "Equation as printed (p. 25)"
    type: equation
    page: 25
curves:
  - file: "ad8421/curves/change-in-input-offset-voltage-vosi-vs-warm-up-time.csv"
    caption: "Figure 25. Change in Input Offset Voltage (VOSI) vs. Warm-Up Time"
    figure: "ad8421/figures/ad8421-f026.png"
    page: 15
    x_unit: "Seconds"
    y_unit: "µV"
  - file: "ad8421/curves/cmrr-vs-frequency.csv"
    caption: "Figure 23. CMRR vs. Frequency"
    figure: "ad8421/figures/ad8421-f024.png"
    page: 15
    x_unit: "Hz"
    y_unit: "dB"
  - file: "ad8421/curves/cmrr-vs-frequency-1-k-source-imbalance.csv"
    caption: "Figure 24. CMRR vs. Frequency, 1 kΩ Source Imbalance"
    figure: "ad8421/figures/ad8421-f025.png"
    page: 15
    x_unit: "Hz"
    y_unit: "dB"
  - file: "ad8421/curves/cmrr-vs-temperature-g-1.csv"
    caption: "Figure 28. CMRR vs. Temperature (G = 1)"
    figure: "ad8421/figures/ad8421-f029.png"
    page: 15
    x_unit: "°C"
    y_unit: "µV/V"
    conditions: "REPRESENTATIVE SAMPLES, GAIN = 1"
  - file: "ad8421/curves/current-noise-spectral-density-vs-frequency.csv"
    caption: "Figure 44. Current Noise Spectral Density vs. Frequency"
    figure: "ad8421/figures/ad8421-f045.png"
    page: 18
    x_unit: "Hz"
    y_unit: "fA/√Hz"
  - file: "ad8421/curves/gain-nonlinearity-g-1-rl-10-k-2-k.csv"
    caption: "Figure 38. Gain Nonlinearity (G = 1), RL = 10 kΩ, 2 kΩ"
    figure: "ad8421/figures/ad8421-f039.png"
    page: 17
    x_unit: "V"
    y_unit: "ppm"
    conditions: "GAIN = 1"
  - file: "ad8421/curves/gain-nonlinearity-g-1-rl-600.csv"
    caption: "Figure 39. Gain Nonlinearity (G = 1), RL = 600 Ω"
    figure: "ad8421/figures/ad8421-f040.png"
    page: 17
    x_unit: "V"
    y_unit: "ppm"
    conditions: "GAIN = 1, R_L = 600Ω"
  - file: "ad8421/curves/gain-nonlinearity-g-1000-rl-600-vout-10-v.csv"
    caption: "Figure 40. Gain Nonlinearity (G = 1000), RL = 600 Ω, VOUT = ±10 V"
    figure: "ad8421/figures/ad8421-f041.png"
    page: 17
    x_unit: "V"
    y_unit: "ppm"
    conditions: "GAIN = 1000, R_L = 600Ω"
  - file: "ad8421/curves/gain-nonlinearity-g-1000-rl-600-vout-5-v.csv"
    caption: "Figure 41. Gain Nonlinearity (G = 1000), RL = 600 Ω, VOUT = ±5 V"
    figure: "ad8421/figures/ad8421-f042.png"
    page: 18
    x_unit: "V"
    y_unit: "ppm"
    conditions: "GAIN = 1000, R_L = 600Ω"
  - file: "ad8421/curves/gain-vs-frequency.csv"
    caption: "Figure 22. Gain vs. Frequency"
    figure: "ad8421/figures/ad8421-f023.png"
    page: 14
    x_unit: "Hz"
    y_unit: "dB"
  - file: "ad8421/curves/gain-vs-temperature-g-1.csv"
    caption: "Figure 27. Gain vs. Temperature (G = 1)"
    figure: "ad8421/figures/ad8421-f028.png"
    page: 15
    x_unit: "°C"
    y_unit: "µV/V"
    conditions: "REPRESENTATIVE SAMPLES, GAIN = 1"
  - file: "ad8421/curves/input-bias-current-vs-common-mode-voltage.csv"
    caption: "Figure 19. Input Bias Current vs. Common-Mode Voltage"
    figure: "ad8421/figures/ad8421-f020.png"
    page: 14
    x_unit: "V"
    y_unit: "nA"
  - file: "ad8421/curves/input-bias-current-vs-temperature.csv"
    caption: "Figure 26. Input Bias Current vs. Temperature"
    figure: "ad8421/figures/ad8421-f027.png"
    page: 15
    x_unit: "°C"
    y_unit: "nA"
  - file: "ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-12-v-and-15-v-g-1.csv"
    caption: "Figure 11. Input Common-Mode Voltage vs. Output Voltage; VS = ±12 V and ±15 V (G = 1)"
    figure: "ad8421/figures/ad8421-f012.png"
    page: 13
    x_unit: "V"
    y_unit: "V"
    conditions: "G = 1"
  - file: "ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-12-v-and-15-v-g-100.csv"
    caption: "Figure 13. Input Common-Mode Voltage vs. Output Voltage; VS = ±12 V and ±15 V (G = 100)"
    figure: "ad8421/figures/ad8421-f014.png"
    page: 13
    x_unit: "V"
    y_unit: "V"
    conditions: "G = 100, VS = ±12V and ±15V"
  - file: "ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-2-5-v-and-5-v-g-1.csv"
    caption: "Figure 12. Input Common-Mode Voltage vs. Output Voltage; VS = ±2.5 V and ±5 V (G = 1)"
    figure: "ad8421/figures/ad8421-f013.png"
    page: 13
    x_unit: "V"
    y_unit: "V"
    conditions: "G = 1"
  - file: "ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-2-5-v-and-5-v-g-100.csv"
    caption: "Figure 14. Input Common-Mode Voltage vs. Output Voltage; VS = ±2.5 V and ±5 V (G = 100)"
    figure: "ad8421/figures/ad8421-f015.png"
    page: 13
    x_unit: "V"
    y_unit: "V"
    conditions: "G = 100; VS = ±5V and VS = ±2.5V"
  - file: "ad8421/curves/input-overvoltage-performance-g-1-vs-15-v.csv"
    caption: "Figure 16. Input Overvoltage Performance; G = 1, VS = ±15 V"
    figure: "ad8421/figures/ad8421-f017.png"
    page: 13
    x_unit: "V"
    y_unit: "mA"
    conditions: "VS = ±15V, G = 1"
  - file: "ad8421/curves/input-overvoltage-performance-g-1-vs-5-v-vs-0-v.csv"
    caption: "Figure 15. Input Overvoltage Performance; G = 1, +VS = 5 V, -VS = 0 V"
    figure: "ad8421/figures/ad8421-f016.png"
    page: 13
    x_unit: "V"
    y_unit: "mA"
    conditions: "VS = 5V, G = 1"
  - file: "ad8421/curves/input-overvoltage-performance-vs-15-v-g-100.csv"
    caption: "Figure 18. Input Overvoltage Performance; VS = ±15 V, G = 100"
    figure: "ad8421/figures/ad8421-f019.png"
    page: 14
    x_unit: "V"
    y_unit: "mA"
    conditions: "VS = ±15V, G = 100"
  - file: "ad8421/curves/input-overvoltage-performance-vs-5-v-vs-0-v-g-100.csv"
    caption: "Figure 17. Input Overvoltage Performance; +VS = 5 V, -VS = 0 V, G = 100"
    figure: "ad8421/figures/ad8421-f018.png"
    page: 14
    x_unit: "V"
    y_unit: "mA"
    conditions: "VS = 5V, G = 100"
  - file: "ad8421/curves/input-voltage-limit-vs-supply-voltage.csv"
    caption: "Figure 33. Input Voltage Limit vs. Supply Voltage"
    figure: "ad8421/figures/ad8421-f034.png"
    page: 16
    x_unit: "±VS (V)"
    y_unit: "V"
  - file: "ad8421/curves/large-signal-frequency-response.csv"
    caption: "Figure 46. Large Signal Frequency Response"
    figure: "ad8421/figures/ad8421-f047.png"
    page: 18
    x_unit: "Hz"
    y_unit: "V p-p"
  - file: "ad8421/curves/negative-psrr-vs-frequency.csv"
    caption: "Figure 21. Negative PSRR vs. Frequency"
    figure: "ad8421/figures/ad8421-f022.png"
    page: 14
    x_unit: "Hz"
    y_unit: "dB"
  - file: "ad8421/curves/noise-density-vs-source-resistance.csv"
    caption: "Figure 2. Noise Density vs. Source Resistance"
    figure: "ad8421/figures/ad8421-f002.png"
    page: 1
    x_unit: "Ω"
    y_unit: "V/√Hz"
    conditions: "G = 100"
  - file: "ad8421/curves/output-voltage-swing-vs-load-resistance.csv"
    caption: "Figure 36. Output Voltage Swing vs. Load Resistance"
    figure: "ad8421/figures/ad8421-f037.png"
    page: 17
    x_unit: "Ω"
    y_unit: "V"
  - file: "ad8421/curves/output-voltage-swing-vs-output-current.csv"
    caption: "Figure 37. Output Voltage Swing vs. Output Current"
    figure: "ad8421/figures/ad8421-f038.png"
    page: 17
    x_unit: "A"
    y_unit: "V"
  - file: "ad8421/curves/output-voltage-swing-vs-supply-voltage-rl-10-k.csv"
    caption: "Figure 34. Output Voltage Swing vs. Supply Voltage, RL = 10 kΩ"
    figure: "ad8421/figures/ad8421-f035.png"
    page: 16
    x_unit: "V (±VS)"
    y_unit: "V"
  - file: "ad8421/curves/output-voltage-swing-vs-supply-voltage-rl-600.csv"
    caption: "Figure 35. Output Voltage Swing vs. Supply Voltage, RL = 600 Ω"
    figure: "ad8421/figures/ad8421-f036.png"
    page: 17
    x_unit: "V"
    y_unit: "V"
    conditions: "RL = 600 Ω"
  - file: "ad8421/curves/positive-psrr-vs-frequency.csv"
    caption: "Figure 20. Positive PSRR vs. Frequency"
    figure: "ad8421/figures/ad8421-f021.png"
    page: 14
    x_unit: "Hz"
    y_unit: "dB"
  - file: "ad8421/curves/rti-voltage-noise-spectral-density-vs-frequency.csv"
    caption: "Figure 42. RTI Voltage Noise Spectral Density vs. Frequency"
    figure: "ad8421/figures/ad8421-f043.png"
    page: 18
    x_unit: "Hz"
    y_unit: "nV/√Hz"
  - file: "ad8421/curves/second-harmonic-distortion-vs-frequency-g-1.csv"
    caption: "Figure 57. Second Harmonic Distortion vs. Frequency (G = 1)"
    figure: "ad8421/figures/ad8421-f058.png"
    page: 20
    x_unit: "Hz"
    y_unit: "dBc"
    conditions: "RL ≥ 600Ω, VOUT = 10V p-p"
  - file: "ad8421/curves/second-harmonic-distortion-vs-frequency-g-1000.csv"
    caption: "Figure 59. Second Harmonic Distortion vs. Frequency (G = 1000)"
    figure: "ad8421/figures/ad8421-f060.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dBc"
    conditions: "VOUT = 10V p-p"
  - file: "ad8421/curves/settling-time-vs-step-size-g-1-rl-2-k-cl-100-pf.csv"
    caption: "Figure 51. Settling Time vs. Step Size (G = 1), RL = 2 kΩ, CL = 100 pF"
    figure: "ad8421/figures/ad8421-f052.png"
    page: 19
    x_unit: "V"
    y_unit: "ns"
    conditions: "GAIN = 1"
  - file: "ad8421/curves/short-circuit-current-vs-temperature-g-1.csv"
    caption: "Figure 30. Short-Circuit Current vs. Temperature (G = 1)"
    figure: "ad8421/figures/ad8421-f031.png"
    page: 16
    x_unit: "°C"
    y_unit: "mA"
  - file: "ad8421/curves/slew-rate-vs-temperature-vs-15-v-g-1.csv"
    caption: "Figure 31. Slew Rate vs. Temperature, VS = ±15 V (G = 1)"
    figure: "ad8421/figures/ad8421-f032.png"
    page: 16
    x_unit: "°C"
    y_unit: "V/µs"
  - file: "ad8421/curves/slew-rate-vs-temperature-vs-5-v-g-1.csv"
    caption: "Figure 32. Slew Rate vs. Temperature, VS = ±5 V (G = 1)"
    figure: "ad8421/figures/ad8421-f033.png"
    page: 16
    x_unit: "°C"
    y_unit: "V/µs"
  - file: "ad8421/curves/supply-current-vs-temperature-g-1.csv"
    caption: "Figure 29. Supply Current vs. Temperature (G = 1)"
    figure: "ad8421/figures/ad8421-f030.png"
    page: 16
    x_unit: "°C"
    y_unit: "mA"
    conditions: "G = 1"
  - file: "ad8421/curves/thd-vs-frequency.csv"
    caption: "Figure 61. THD vs. Frequency"
    figure: "ad8421/figures/ad8421-f062.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dBc"
    conditions: "VOUT = 10V p-p, RL = 2kΩ"
  - file: "ad8421/curves/third-harmonic-distortion-vs-frequency-g-1.csv"
    caption: "Figure 58. Third Harmonic Distortion vs. Frequency (G = 1)"
    figure: "ad8421/figures/ad8421-f059.png"
    page: 20
  - file: "ad8421/curves/third-harmonic-distortion-vs-frequency-g-1000.csv"
    caption: "Figure 60. Third Harmonic Distortion vs. Frequency (G = 1000)"
    figure: "ad8421/figures/ad8421-f061.png"
    page: 21
    x_unit: "Hz"
    y_unit: "dBc"
    conditions: "R_L ≥ 600Ω, V_OUT = 10V p-p"
  - file: "ad8421/curves/typical-distribution-of-cmrr-g-1.csv"
    caption: "Figure 10. Typical Distribution of CMRR (G = 1)"
    figure: "ad8421/figures/ad8421-f011.png"
    page: 12
    x_unit: "µV/V"
    y_unit: "UNITS"
    conditions: "G = 1"
  - file: "ad8421/curves/typical-distribution-of-input-bias-current.csv"
    caption: "Figure 6. Typical Distribution of Input Bias Current"
    figure: "ad8421/figures/ad8421-f007.png"
    page: 12
    x_unit: "nA"
    y_unit: "UNITS"
  - file: "ad8421/curves/typical-distribution-of-input-offset-current.csv"
    caption: "Figure 9. Typical Distribution of Input Offset Current"
    figure: "ad8421/figures/ad8421-f010.png"
    page: 12
    x_unit: "nA"
    y_unit: "UNITS"
  - file: "ad8421/curves/typical-distribution-of-input-offset-voltage.csv"
    caption: "Figure 5. Typical Distribution of Input Offset Voltage"
    figure: "ad8421/figures/ad8421-f006.png"
    page: 12
    x_unit: "µV"
    y_unit: "UNITS"
  - file: "ad8421/curves/typical-distribution-of-output-offset-voltage.csv"
    caption: "Figure 8. Typical Distribution of Output Offset Voltage"
    figure: "ad8421/figures/ad8421-f009.png"
    page: 12
    x_unit: "µV"
    y_unit: "UNITS"
  - file: "ad8421/curves/typical-distribution-of-psrr-g-1.csv"
    caption: "Figure 7. Typical Distribution of PSRR (G = 1)"
    figure: "ad8421/figures/ad8421-f008.png"
    page: 12
    x_unit: "µV/V"
    y_unit: "UNITS"
    conditions: "G = 1"
  - file: "ad8421/curves/typical-spectrum-of-the-ad8421-g-10-driving-the-ad7685.csv"
    caption: "Figure 73. Typical Spectrum of the AD8421 (G = 10) Driving the AD7685"
    figure: "ad8421/figures/ad8421-f074.png"
    page: 28
    x_unit: "kHz"
    y_unit: "dB OF FULL SCALE"
    conditions: "SNR 81.12dB, THD -100.91dB, SFDR 90.71dB"
agentforge:
  part_number: "AD8421"
  datasheet_revision: "A"
  reading_order: "structure-tree"
---

# AD8421 — 3 nV/√Hz, Low Power Instrumentation Amplifier

*Datasheet: [AD8421 data sheet (PDF)](https://www.analog.com/media/en/technical-documentation/data-sheets/ad8421.pdf)*

### FEATURES
<!-- page: 1 -->

- Low power

  - 2.3 mA maximum supply current

- Low noise

  - 3.2 nV/√Hz maximum input voltage noise at 1 kHz 

  - 200 fA/√Hz current noise at 1 kHz

- Excellent ac specifications

  - 10 MHz bandwidth (G = 1)

  - 2 MHz bandwidth (G = 100)

  - 0.6 µs settling time to 0.001% (G = 10)

  - 80 dB CMRR at 20 kHz (G = 1)

  - 35 V/µs slew rate

- High precision dc performance (AD8421BRZ)

  - 94 dB CMRR minimum (G = 1)

  - 0.2 µV/°C maximum input offset voltage drift

  - 1 ppm/°C maximum gain drift (G = 1)

  - 500 pA maximum input bias current

- Inputs protected to 40 V from opposite supply ±2.5 V to ±18 V dual supply (5 V to 36 V single supply) Gain set with a single resistor (G = 1 to 10,000)

- Available in 8-lead LFCSP, 8-lead MSOP, and 8-lead SOIC

### APPLICATIONS
<!-- page: 1 -->

- Medical instrumentation
- Precision data acquisition
- Microphone preamplification
- Vibration analysis
- Multiplexed input applications
- ADC driver

### Typical Application Diagram

![Figure 1. AD8421 Driving 16-Bit AD7685](ad8421/figures/ad8421-f001.png)

*Figure 1. AD8421 Driving 16-Bit [AD7685](https://www.analog.com/AD7685?doc=AD8421.pdf)*

![Figure 2. Noise Density vs. Source Resistance](ad8421/figures/ad8421-f002.png)

*Figure 2. Noise Density vs. Source Resistance*

Digitized data: [noise-density-vs-source-resistance.csv](ad8421/curves/noise-density-vs-source-resistance.csv) (x: Ω; y: V/√Hz) — values read off the printed plot by the digitizer, not published data.

### GENERAL DESCRIPTION
<!-- pages: 1-3 -->

The [AD8421](http://www.analog.com/AD8421) is a low cost, low power, extremely low noise, ultralow bias current, high speed instrumentation amplifier that is ideally suited for a broad spectrum of signal conditioning and data acquisition applications. This product features extremely high CMRR, allowing it to extract low level signals in the presence of high frequency common-mode noise over a wide temperature range.

The 10 MHz bandwidth, 35 V/µs slew rate, and 0.6 µs settling time to 0.001% (G = 10) allow the [AD8421](http://www.analog.com/AD8421) to amplify high speed signals and excel in applications that require high channel count, multiplexed systems. Even at higher gains, the current feedback architecture maintains high performance; for example, at G = 100, the bandwidth is 2 MHz and the settling time is 0.8 µs. The [AD8421](http://www.analog.com/AD8421) has excellent distortion performance, making it suitable for use in demanding applications such as vibration analysis.

The [AD8421](http://www.analog.com/AD8421) delivers 3 nV/√Hz input voltage noise and 200 fA/√Hz current noise with only 2 mA quiescent current, making it an ideal choice for measuring low level signals. For applications with high source impedance, the [AD8421](http://www.analog.com/AD8421) employs innovative process technology and design techniques to provide noise performance that is limited only by the sensor.

The [AD8421](http://www.analog.com/AD8421) uses unique protection methods to ensure robust inputs while still maintaining very low noise. This protection allows input voltages up to 40 V from the opposite supply rail without damage to the part.

A single resistor sets the gain from 1 to 10,000. The reference pin can be used to apply a precise offset to the output voltage.

The [AD8421](http://www.analog.com/AD8421) is specified from -40°C to +85°C for the 8-lead MSOP and SOIC packages, and from -40°C to +125°C for the 8-lead LFCSP package.

Rev. A Information  furnished  by  Analog  Devices  is  believed  to  be  accurate  and  reliable.  However,  no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is  granted by implication  or  otherwise  under any patent  or  patent  rights  of  Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

### TABLE OF CONTENTS

- Features....................................................1
- Applications................................................1
- Typical Application Diagram.................................1
- General Description.........................................1
- Revision History............................................2
- Specifications..............................................3
  - AR and BR Grades..........................................3
  - ARM and BRM Grades........................................5
  - ACP Grade.................................................7
- Absolute Maximum Ratings...................................10
  - Thermal Resistance.......................................10
  - ESD Caution..............................................10
- Pin Configurations and Function Descriptions...............11
- Typical Performance Characteristics........................12
- Theory of Operation........................................22
  - Architecture.............................................22
  - Gain Selection...........................................22
  - Reference Terminal.......................................23
  - Input Voltage Range......................................23
  - Layout...................................................23
  - Input Bias Current Return Path...........................24
  - Input Voltages Beyond the Supply Rails...................24
  - Radio Frequency Interference (RFI).......................25
  - Calculating the Noise of the Input Stage.................25
- Applications Information...................................27
  - Differential Output Configuration........................27
  - Driving an ADC...........................................28
- Outline Dimensions.........................................29
  - Ordering Guide...........................................30

### REVISION HISTORY
10/2020-Rev. 0 to Rev. A 
- Added 8-Lead LFCSP, Throughout Changed Pin Connection Diagram Section to Typical Application Diagram Section......................1
- Changes to Features Section, Figure 1, and General Description Section.............................................................1
- Added ACP Grade Section and Table 3; Renumbered Sequentially......7
- Changes to Table 5...............................................10
- Changes to Figure 44.............................................18
- Changes to Figure 72.............................................28
- Added Figure 76; Renumbered Sequentially.........................29
- Changes to Ordering Guide........................................30

5/2012-Revision 0: Initial Version

### SPECIFICATIONS
<!-- pages: 3-5 -->

$V_{S}$ = ±15 V, $V_{REF}$ = 0 V, $T_{A}$ = 25°C, G = 1, $R_{L}$ = 2 kΩ, unless otherwise noted.

### AR AND BR GRADES
<!-- page: 3 -->

**Table 1. (AR and BR Grades Specifications)** ([table-00-p3-spec.csv](ad8421/tables/table-00-p3-spec.csv), p. 3)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **COMMON-MODE REJECTION RATIO (CMRR)** |  |  |  |  |  |
| **CMRR DC to 60 Hz with 1 kΩ Source Imbalance** | $V_{CM}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | AR grade | 86 |  |  | dB |
| G = 1 | BR grade | 94 |  |  | dB |
| G = 10 | AR grade | 106 |  |  | dB |
| G = 10 | BR grade | 114 |  |  | dB |
| G = 100 | AR grade | 126 |  |  | dB |
| G = 100 | BR grade | 134 |  |  | dB |
| G = 1000 | AR grade | 136 |  |  | dB |
| G = 1000 | BR grade | 140 |  |  | dB |
| Over Temperature, G = 1 | AR grade, T = −40°C to +85°C | 80 |  |  | dB |
| Over Temperature, G = 1 | BR grade, T = −40°C to +85°C | 93 |  |  | dB |
| **CMRR at 20 kHz** | $V_{CM}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | AR grade | 80 |  |  | dB |
| G = 1 | BR grade | 80 |  |  | dB |
| G = 10 | AR grade | 90 |  |  | dB |
| G = 10 | BR grade | 100 |  |  | dB |
| G = 100 | AR grade | 100 |  |  | dB |
| G = 100 | BR grade | 110 |  |  | dB |
| G = 1000 | AR grade | 110 |  |  | dB |
| G = 1000 | BR grade | 120 |  |  | dB |
| **NOISE** |  |  |  |  |  |
| **Voltage Noise, 1 kHz $[^{1}]$** | $V_{IN+}$, $V_{IN-}$ = 0 V |  |  |  |  |
| Input Voltage Noise, $e_{ni}$ | AR grade |  | 3 | 3.2 | nV/√Hz |
| Input Voltage Noise, $e_{ni}$ | BR grade |  | 3 | 3.2 | nV/√Hz |
| Output Voltage Noise, $e_{no}$ | AR grade |  |  | 60 | nV/√Hz |
| Output Voltage Noise, $e_{no}$ | BR grade |  |  | 60 | nV/√Hz |
| **Peak to Peak, RTI** | f = 0.1 Hz to 10 Hz |  |  |  |  |
| G = 1 | AR grade |  | 2 |  | µV p-p |
| G = 1 | BR grade |  | 2 | 2.2 | µV p-p |
| G = 10 | AR grade |  | 0.5 |  | µV p-p |
| G = 10 | BR grade |  | 0.5 |  | µV p-p |
| G = 100 to 1000 | AR grade |  | 0.07 |  | µV p-p |
| G = 100 to 1000 | BR grade |  | 0.07 | 0.09 | µV p-p |
| **Current Noise** |  |  |  |  |  |
| Spectral Density | AR grade, f = 1 kHz |  | 200 |  | fA/√Hz |
| Spectral Density | BR grade, f = 1 kHz |  | 200 |  | fA/√Hz |
| Peak to Peak, RTI | AR grade, f = 0.1 Hz to 10 Hz |  | 18 |  | pA p-p |
| Peak to Peak, RTI | BR grade, f = 0.1 Hz to 10 Hz |  | 18 |  | pA p-p |
| **VOLTAGE OFFSET $[^{2}]$** |  |  |  |  |  |
| Input Offset Voltage, $V_{OSI}$ | AR grade, $V_{S}$ = ±5 V to ±15 V |  |  | 60 | µV |
| Input Offset Voltage, $V_{OSI}$ | BR grade, $V_{S}$ = ±5 V to ±15 V |  |  | 25 | µV |
| Over Temperature | AR grade, $T_{A}$ = −40°C to +85°C |  |  | 86 | µV |
| Over Temperature | BR grade, $T_{A}$ = −40°C to +85°C |  |  | 45 | µV |
| Average TC | AR grade |  |  | 0.4 | µV/°C |
| Average TC | BR grade |  |  | 0.2 | µV/°C |
| Output Offset Voltage, $V_{OSO}$ | AR grade |  |  | 350 | µV |
| Output Offset Voltage, $V_{OSO}$ | BR grade |  |  | 250 | µV |
| Over Temperature | AR grade, $T_{A}$ = −40°C to +85°C |  |  | 0.66 | mV |
| Over Temperature | BR grade, $T_{A}$ = −40°C to +85°C |  |  | 0.45 | mV |
| Average TC | AR grade |  |  | 6 | µV/°C |
| Average TC | BR grade |  |  | 5 | µV/°C |
| **Offset RTI vs. Supply (PSR)** | $V_{S}$ = ±2.5 V to ±18 V |  |  |  |  |
| G = 1 | AR grade | 90 | 120 |  | dB |
| G = 1 | BR grade | 100 | 120 |  | dB |
| G = 10 | AR grade | 110 | 120 |  | dB |
| G = 10 | BR grade | 120 | 140 |  | dB |
| G = 100 | AR grade | 124 | 130 |  | dB |
| G = 100 | BR grade | 140 | 150 |  | dB |
| G = 1000 | AR grade | 130 | 140 |  | dB |
| G = 1000 | BR grade | 140 | 150 |  | dB |
| **INPUT CURRENT** |  |  |  |  |  |
| Input Bias Current | AR grade |  | 1 | 2 | nA |
| Input Bias Current | BR grade |  | 0.1 | 0.5 | nA |
| Over Temperature | AR grade, $T_{A}$ = −40°C to +85°C |  |  | 8 | nA |
| Over Temperature | BR grade, $T_{A}$ = −40°C to +85°C |  |  | 6 | nA |
| Average TC | AR grade |  | 50 |  | pA/°C |
| Average TC | BR grade |  | 50 |  | pA/°C |
| Input Offset Current | AR grade |  | 0.5 | 2 | nA |
| Input Offset Current | BR grade |  | 0.1 | 0.5 | nA |
| Over Temperature | AR grade, $T_{A}$ = −40°C to +85°C |  |  | 2.2 | nA |
| Over Temperature | BR grade, $T_{A}$ = −40°C to +85°C |  |  | 0.8 | nA |
| Average TC | AR grade |  | 1 |  | pA/°C |
| Average TC | BR grade |  | 1 |  | pA/°C |
| **DYNAMIC RESPONSE** |  |  |  |  |  |
| **Small Signal Bandwidth** | −3 dB |  |  |  |  |
| G = 1 | AR grade |  | 10 |  | MHz |
| G = 1 | BR grade |  | 10 |  | MHz |
| G = 10 | AR grade |  | 10 |  | MHz |
| G = 10 | BR grade |  | 10 |  | MHz |
| G = 100 | AR grade |  | 2 |  | MHz |
| G = 100 | BR grade |  | 2 |  | MHz |
| G = 1000 | AR grade |  | 0.2 |  | MHz |
| G = 1000 | BR grade |  | 0.2 |  | MHz |
| **Settling Time to 0.01%** | 10 V step |  |  |  |  |
| G = 1 | AR grade |  | 0.7 |  | µs |
| G = 1 | BR grade |  | 0.7 |  | µs |
| G = 10 | AR grade |  | 0.4 |  | µs |
| G = 10 | BR grade |  | 0.4 |  | µs |
| G = 100 | AR grade |  | 0.6 |  | µs |
| G = 100 | BR grade |  | 0.6 |  | µs |
| G = 1000 | AR grade |  | 5 |  | µs |
| G = 1000 | BR grade |  | 5 |  | µs |
| **Settling Time to 0.001%** | 10 V step |  |  |  |  |
| G = 1 | AR grade |  | 1 |  | µs |
| G = 1 | BR grade |  | 1 |  | µs |
| G = 10 | AR grade |  | 0.6 |  | µs |
| G = 10 | BR grade |  | 0.6 |  | µs |
| G = 100 | AR grade |  | 0.8 |  | µs |
| G = 100 | BR grade |  | 0.8 |  | µs |
| G = 1000 | AR grade |  | 6 |  | µs |
| G = 1000 | BR grade |  | 6 |  | µs |
| **Slew Rate** |  |  |  |  |  |
| G = 1 to 100 | AR grade |  | 35 |  | V/µs |
| G = 1 to 100 | BR grade |  | 35 |  | V/µs |
| **GAIN $[^{3}]$** | G = 1 + (9.9 kΩ/$R_{G}$) |  |  |  |  |
| Gain Range | AR grade | 1 |  | 10,000 | V/V |
| Gain Range | BR grade | 1 |  | 10,000 | V/V |
| **Gain Error** | $V_{OUT}$ = ±10 V |  |  |  |  |
| G = 1 | AR grade |  |  | 0.02 | % |
| G = 1 | BR grade |  |  | 0.01 | % |
| G = 10 to 1000 | AR grade |  |  | 0.2 | % |
| G = 10 to 1000 | BR grade |  |  | 0.1 | % |
| **Gain Nonlinearity** | $V_{OUT}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | AR grade, $R_{L}$ ≥ 2 kΩ |  |  | 1 | ppm |
| G = 1 | BR grade, $R_{L}$ ≥ 2 kΩ |  |  | 1 | ppm |
| G = 1 | AR grade, $R_{L}$ = 600 Ω |  | 1 | 3 | ppm |
| G = 1 | BR grade, $R_{L}$ = 600 Ω |  | 1 | 3 | ppm |
| G = 10 to 1000 | AR grade, $R_{L}$ ≥ 600 Ω |  | 30 | 50 | ppm |
| G = 10 to 1000 | BR grade, $R_{L}$ ≥ 600 Ω |  | 30 | 50 | ppm |
| G = 10 to 1000 | AR grade, $V_{OUT}$ = −5 V to +5 V |  | 5 | 10 | ppm |
| G = 10 to 1000 | BR grade, $V_{OUT}$ = −5 V to +5 V |  | 5 | 10 | ppm |
| **Gain vs. Temperature $[^{3}]$** |  |  |  |  |  |
| G = 1 | AR grade |  |  | 5 | ppm/°C |
| G = 1 | BR grade |  | 0.1 | 1 | ppm/°C |
| G > 1 | AR grade |  |  | −50 | ppm/°C |
| G > 1 | BR grade |  |  | −50 | ppm/°C |
| **INPUT** |  |  |  |  |  |
| Input Impedance |  |  |  |  |  |
| Differential | AR grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Differential | BR grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Common Mode | AR grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Common Mode | BR grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Input Operating Voltage Range $[^{4}]$ | AR grade, $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 2.3 |  | +$V_{S}$ − 1.8 | V |
| Input Operating Voltage Range $[^{4}]$ | BR grade, $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 2.3 |  | +$V_{S}$ − 1.8 | V |
| Over Temperature | AR grade, $T_{A}$ = −40°C | −$V_{S}$ + 2.5 |  | +$V_{S}$ − 2.0 | V |
| Over Temperature | BR grade, $T_{A}$ = −40°C | −$V_{S}$ + 2.5 |  | +$V_{S}$ − 2.0 | V |
| Over Temperature | AR grade, $T_{A}$ = +85°C | −$V_{S}$ + 2.1 |  | +$V_{S}$ − 1.8 | V |
| Over Temperature | BR grade, $T_{A}$ = +85°C | −$V_{S}$ + 2.1 |  | +$V_{S}$ − 1.8 | V |
| **OUTPUT** | $R_{L}$ = 2 kΩ |  |  |  |  |
| Output Swing | AR grade, $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Output Swing | BR grade, $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Over Temperature | AR grade, $T_{A}$ = −40°C to +85°C | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Over Temperature | BR grade, $T_{A}$ = −40°C to +85°C | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Short-Circuit Current | AR grade |  | 65 |  | mA |
| Short-Circuit Current | BR grade |  | 65 |  | mA |
| **REFERENCE INPUT** |  |  |  |  |  |
| $R_{IN}$ | AR grade |  | 20 |  | kΩ |
| $R_{IN}$ | BR grade |  | 20 |  | kΩ |
| $I_{IN}$ | AR grade, $V_{IN+}$, $V_{IN-}$ = 0 V |  | 20 | 24 | µA |
| $I_{IN}$ | BR grade, $V_{IN+}$, $V_{IN-}$ = 0 V |  | 20 | 24 | µA |
| Voltage Range | AR grade | −$V_{S}$ |  | +$V_{S}$ | V |
| Voltage Range | BR grade | −$V_{S}$ |  | +$V_{S}$ | V |
| Reference Gain to Output | AR grade |  | 1 ± 0.0001 |  | V/V |
| Reference Gain to Output | BR grade |  | 1 ± 0.0001 |  | V/V |
| **POWER SUPPLY** |  |  |  |  |  |
| Operating Range | AR Grade; Dual supply | ±2.5 |  | ±18 | V |
| Operating Range | BR Grade; Dual supply | ±2.5 |  | ±18 | V |
| Operating Range | AR Grade; Single supply | 5 |  | 36 | V |
| Operating Range | BR Grade; Single supply | 5 |  | 36 | V |
| Quiescent Current | AR Grade |  | 2 | 2.3 | mA |
| Quiescent Current | BR Grade |  | 2 | 2.3 | mA |
| Over Temperature | AR Grade; $T_{A}$ = −40°C to +85°C |  |  | 2.6 | mA |
| Over Temperature | BR Grade; $T_{A}$ = −40°C to +85°C |  |  | 2.6 | mA |
| **TEMPERATURE RANGE** |  |  |  |  |  |
| For Specified Performance | AR Grade | −40 |  | +85 | °C |
| For Specified Performance | BR Grade | −40 |  | +85 | °C |
| Operational $[^{5}]$ | AR Grade | −40 |  | +125 | °C |
| Operational $[^{5}]$ | BR Grade | −40 |  | +125 | °C |

$[^{1}]$: Total voltage noise = $\sqrt{e_{ni}^{2} + (e_{no}/G)^{2} + e_{RG}^{2}}$. See the Theory of Operation section for more information.

$[^{2}]$: Total RTI $V_{OS}$ = ($V_{OSI}$) + ($V_{OSO}$/G).

$[^{3}]$: These specifications do not include the tolerance of the external gain setting resistor, $R_{G}$. For G > 1, add $R_{G}$ errors to the specifications given in this table.

$[^{4}]$: Input voltage range of the [AD8421](http://www.analog.com/AD8421) input stage only. The input range can depend on the common-mode voltage, differential voltage, gain, and reference voltage. See the Input Voltage Range section for more details.

$[^{5}]$: See the Typical Performance Characteristics section for expected operation between 85°C and 125°C.

*[Equation not captured in extraction — see the PDF.]*

### ARM AND BRM GRADES
<!-- pages: 5-10 -->

**Table 2. (ARM and BRM Grades Specifications)** ([table-01-p5-spec.csv](ad8421/tables/table-01-p5-spec.csv), p. 5)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **COMMON-MODE REJECTION RATIO (CMRR)** |  |  |  |  |  |
| **CMRR DC to 60 Hz with 1 kΩ Source Imbalance** | $V_{CM}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | ARM grade | 84 |  |  | dB |
| G = 1 | BRM grade | 92 |  |  | dB |
| G = 10 | ARM grade | 104 |  |  | dB |
| G = 10 | BRM grade | 112 |  |  | dB |
| G = 100 | ARM grade | 124 |  |  | dB |
| G = 100 | BRM grade | 132 |  |  | dB |
| G = 1000 | ARM grade | 134 |  |  | dB |
| G = 1000 | BRM grade | 140 |  |  | dB |
| Over Temperature, G = 1 | ARM grade, $T_{A}$ = −40°C to +85°C | 80 |  |  | dB |
| Over Temperature, G = 1 | BRM grade, $T_{A}$ = −40°C to +85°C | 90 |  |  | dB |
| **CMRR at 20 kHz** | $V_{CM}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | ARM grade | 80 |  |  | dB |
| G = 1 | BRM grade | 80 |  |  | dB |
| G = 10 | ARM grade | 90 |  |  | dB |
| G = 10 | BRM grade | 90 |  |  | dB |
| G = 100 | ARM grade | 100 |  |  | dB |
| G = 100 | BRM grade | 100 |  |  | dB |
| G = 1000 | ARM grade | 100 |  |  | dB |
| G = 1000 | BRM grade | 100 |  |  | dB |
| **NOISE** |  |  |  |  |  |
| **Voltage Noise, 1 kHz $[^{1}]$** | $V_{IN+}$, $V_{IN-}$ = 0 V |  |  |  |  |
| Input Voltage Noise, $e_{ni}$ | ARM grade |  | 3 | 3.2 | nV/√Hz |
| Input Voltage Noise, $e_{ni}$ | BRM grade |  | 3 | 3.2 | nV/√Hz |
| Output Voltage Noise, $e_{no}$ | ARM grade |  |  | 60 | nV/√Hz |
| Output Voltage Noise, $e_{no}$ | BRM grade |  |  | 60 | nV/√Hz |
| **Peak to Peak, RTI** | f = 0.1 Hz to 10 Hz |  |  |  |  |
| G = 1 | ARM grade |  | 2 |  | µV p-p |
| G = 1 | BRM grade |  | 2 | 2.2 | µV p-p |
| G = 10 | ARM grade |  | 0.5 |  | µV p-p |
| G = 10 | BRM grade |  | 0.5 |  | µV p-p |
| G = 100 to 1000 | ARM grade |  | 0.07 |  | µV p-p |
| G = 100 to 1000 | BRM grade |  | 0.07 | 0.09 | µV p-p |
| **Current Noise** |  |  |  |  |  |
| Spectral Density | ARM grade, f = 1 kHz |  | 200 |  | fA/√Hz |
| Spectral Density | BRM grade, f = 1 kHz |  | 200 |  | fA/√Hz |
| Peak to Peak, RTI | ARM grade, f = 0.1 Hz to 10 Hz |  | 18 |  | pA p-p |
| Peak to Peak, RTI | BRM grade, f = 0.1 Hz to 10 Hz |  | 18 |  | pA p-p |
| **VOLTAGE OFFSET $[^{2}]$** |  |  |  |  |  |
| Input Offset Voltage, $V_{OSI}$ | ARM grade, $V_{S}$ = ±5 V to ±15 V |  |  | 70 | µV |
| Input Offset Voltage, $V_{OSI}$ | BRM grade, $V_{S}$ = ±5 V to ±15 V |  |  | 50 | µV |
| Over Temperature | ARM grade, $T_{A}$ = −40°C to +85°C |  |  | 135 | µV |
| Over Temperature | BRM grade, $T_{A}$ = −40°C to +85°C |  |  | 135 | µV |
| Average TC | ARM grade |  |  | 0.9 | µV/°C |
| Average TC | BRM grade |  |  | 0.9 | µV/°C |
| Output Offset Voltage, $V_{OSO}$ | ARM grade |  |  | 600 | µV |
| Output Offset Voltage, $V_{OSO}$ | BRM grade |  |  | 400 | µV |
| Over Temperature | ARM grade, $T_{A}$ = −40°C to +85°C |  |  | 1 | mV |
| Over Temperature | BRM grade, $T_{A}$ = −40°C to +85°C |  |  | 1 | mV |
| Average TC | ARM grade |  |  | 9 | µV/°C |
| Average TC | BRM grade |  |  | 9 | µV/°C |
| **Offset RTI vs. Supply (PSR)** | $V_{S}$ = ±2.5 V to ±18 V |  |  |  |  |
| G = 1 | ARM grade | 90 | 120 |  | dB |
| G = 1 | BRM grade | 100 | 120 |  | dB |
| G = 10 | ARM grade | 110 | 120 |  | dB |
| G = 10 | BRM grade | 120 | 140 |  | dB |
| G = 100 | ARM grade | 124 | 130 |  | dB |
| G = 100 | BRM grade | 140 | 150 |  | dB |
| G = 1000 | ARM grade | 130 | 140 |  | dB |
| G = 1000 | BRM grade | 140 | 150 |  | dB |
| **INPUT CURRENT** |  |  |  |  |  |
| Input Bias Current | ARM grade |  | 1 | 2 | nA |
| Input Bias Current | BRM grade |  | 0.1 | 1 | nA |
| Over Temperature | ARM grade, $T_{A}$ = −40°C to +85°C |  |  | 8 | nA |
| Over Temperature | BRM grade, $T_{A}$ = −40°C to +85°C |  |  | 6 | nA |
| Average TC | ARM grade |  | 50 |  | pA/°C |
| Average TC | BRM grade |  | 50 |  | pA/°C |
| Input Offset Current | ARM grade |  | 0.5 | 2 | nA |
| Input Offset Current | BRM grade |  | 0.1 | 1 | nA |
| Over Temperature | ARM grade, $T_{A}$ = −40°C to +85°C |  |  | 3 | nA |
| Over Temperature | BRM grade, $T_{A}$ = −40°C to +85°C |  |  | 1.5 | nA |
| Average TC | ARM grade |  | 1 |  | pA/°C |
| Average TC | BRM grade |  | 1 |  | pA/°C |
| **DYNAMIC RESPONSE** |  |  |  |  |  |
| **Small Signal Bandwidth** | −3 dB |  |  |  |  |
| G = 1 | ARM grade |  | 10 |  | MHz |
| G = 1 | BRM grade |  | 10 |  | MHz |
| G = 10 | ARM grade |  | 10 |  | MHz |
| G = 10 | BRM grade |  | 10 |  | MHz |
| G = 100 | ARM grade |  | 2 |  | MHz |
| G = 100 | BRM grade |  | 2 |  | MHz |
| G = 1000 | ARM grade |  | 0.2 |  | MHz |
| G = 1000 | BRM grade |  | 0.2 |  | MHz |
| **Settling Time 0.01%** | 10 V step |  |  |  |  |
| G = 1 | ARM grade |  | 0.7 |  | µs |
| G = 1 | BRM grade |  | 0.7 |  | µs |
| G = 10 | ARM grade |  | 0.4 |  | µs |
| G = 10 | BRM grade |  | 0.4 |  | µs |
| G = 100 | ARM grade |  | 0.6 |  | µs |
| G = 100 | BRM grade |  | 0.6 |  | µs |
| G = 1000 | ARM grade |  | 5 |  | µs |
| G = 1000 | BRM grade |  | 5 |  | µs |
| **Settling Time 0.001%** | 10 V step |  |  |  |  |
| G = 1 | ARM grade |  | 1 |  | µs |
| G = 1 | BRM grade |  | 1 |  | µs |
| G = 10 | ARM grade |  | 0.6 |  | µs |
| G = 10 | BRM grade |  | 0.6 |  | µs |
| G = 100 | ARM grade |  | 0.8 |  | µs |
| G = 100 | BRM grade |  | 0.8 |  | µs |
| G = 1000 | ARM grade |  | 6 |  | µs |
| G = 1000 | BRM grade |  | 6 |  | µs |
| **Slew Rate** |  |  |  |  |  |
| G = 1 to 100 | ARM grade |  | 35 |  | V/µs |
| G = 1 to 100 | BRM grade |  | 35 |  | V/µs |
| **GAIN $[^{3}]$** | G = 1 + (9.9 kΩ/$R_{G}$) |  |  |  |  |
| Gain Range | ARM grade | 1 |  | 10,000 | V/V |
| Gain Range | BRM grade | 1 |  | 10,000 | V/V |
| **Gain Error** | $V_{OUT}$ = ±10 V |  |  |  |  |
| G = 1 | ARM grade |  |  | 0.05 | % |
| G = 1 | BRM grade |  |  | 0.02 | % |
| G = 10 to 1000 | ARM grade |  |  | 0.3 | % |
| G = 10 to 1000 | BRM grade |  |  | 0.2 | % |
| **Gain Nonlinearity** | $V_{OUT}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | ARM grade, $R_{L}$ ≥ 2 kΩ |  |  | 1 | ppm |
| G = 1 | BRM grade, $R_{L}$ ≥ 2 kΩ |  |  | 1 | ppm |
| G = 1 | ARM grade, $R_{L}$ = 600 Ω |  | 1 | 3 | ppm |
| G = 1 | BRM grade, $R_{L}$ = 600 Ω |  | 1 | 3 | ppm |
| G = 10 to 1000 | ARM grade, $R_{L}$ ≥ 600 Ω |  | 30 | 50 | ppm |
| G = 10 to 1000 | BRM grade, $R_{L}$ ≥ 600 Ω |  | 30 | 50 | ppm |
| G = 10 to 1000 | ARM grade, $V_{OUT}$ = −5 V to +5 V |  | 5 | 10 | ppm |
| G = 10 to 1000 | BRM grade, $V_{OUT}$ = −5 V to +5 V |  | 5 | 10 | ppm |
| **Gain vs. Temperature $[^{3}]$** |  |  |  |  |  |
| G = 1 | ARM grade |  |  | 5 | ppm/°C |
| G = 1 | BRM grade |  | 0.1 | 1 | ppm/°C |
| G > 1 | ARM grade |  |  | −50 | ppm/°C |
| G > 1 | BRM grade |  |  | −50 | ppm/°C |
| **INPUT** |  |  |  |  |  |
| Input Impedance |  |  |  |  |  |
| Differential | ARM grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Differential | BRM grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Common Mode | ARM grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Common Mode | BRM grade |  | 30\|\|3 |  | GΩ\|\|pF |
| Input Operating Voltage Range $[^{4}]$ | ARM grade, $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 2.3 |  | +$V_{S}$ − 1.8 | V |
| Input Operating Voltage Range $[^{4}]$ | BRM grade, $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 2.3 |  | +$V_{S}$ − 1.8 | V |
| Over Temperature | ARM grade, $T_{A}$ = −40°C | −$V_{S}$ + 2.5 |  | +$V_{S}$ − 2.0 | V |
| Over Temperature | BRM grade, $T_{A}$ = −40°C | −$V_{S}$ + 2.5 |  | +$V_{S}$ − 2.0 | V |
| Over Temperature | ARM grade, $T_{A}$ = +85°C | −$V_{S}$ + 2.1 |  | +$V_{S}$ − 1.8 | V |
| Over Temperature | BRM grade, $T_{A}$ = +85°C | −$V_{S}$ + 2.1 |  | +$V_{S}$ − 1.8 | V |
| **OUTPUT** | $R_{L}$ = 2 kΩ |  |  |  |  |
| Output Swing | ARM Grade; $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Output Swing | BRM Grade; $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Over Temperature | ARM Grade; $T_{A}$ = −40°C to +85°C | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Over Temperature | BRM Grade; $T_{A}$ = −40°C to +85°C | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.6 | V |
| Short-Circuit Current | ARM Grade |  | 65 |  | mA |
| Short-Circuit Current | BRM Grade |  | 65 |  | mA |
| **REFERENCE INPUT** |  |  |  |  |  |
| $R_{IN}$ | ARM Grade |  | 20 |  | kΩ |
| $R_{IN}$ | BRM Grade |  | 20 |  | kΩ |
| $I_{IN}$ | ARM Grade; $V_{IN+}$, $V_{IN-}$ = 0 V |  | 20 | 24 | µA |
| $I_{IN}$ | BRM Grade; $V_{IN+}$, $V_{IN-}$ = 0 V |  | 20 | 24 | µA |
| Voltage Range | ARM Grade | −$V_{S}$ |  | +$V_{S}$ | V |
| Voltage Range | BRM Grade | −$V_{S}$ |  | +$V_{S}$ | V |
| Reference Gain to Output | ARM Grade |  | 1 ± 0.0001 |  | V/V |
| Reference Gain to Output | BRM Grade |  | 1 ± 0.0001 |  | V/V |
| **POWER SUPPLY** |  |  |  |  |  |
| Operating Range | ARM Grade; Dual supply | ±2.5 |  | ±18 | V |
| Operating Range | BRM Grade; Dual supply | ±2.5 |  | ±18 | V |
| Operating Range | ARM Grade; Single supply | 5 |  | 36 | V |
| Operating Range | BRM Grade; Single supply | 5 |  | 36 | V |
| Quiescent Current | ARM Grade |  | 2 | 2.3 | mA |
| Quiescent Current | BRM Grade |  | 2 | 2.3 | mA |
| Over Temperature | ARM Grade; $T_{A}$ = −40°C to +85°C |  |  | 2.6 | mA |
| Over Temperature | BRM Grade; $T_{A}$ = −40°C to +85°C |  |  | 2.6 | mA |
| **TEMPERATURE RANGE** |  |  |  |  |  |
| For Specified Performance | ARM Grade | −40 |  | +85 | °C |
| For Specified Performance | BRM Grade | −40 |  | +85 | °C |
| Operational $[^{5}]$ | ARM Grade | −40 |  | +125 | °C |
| Operational $[^{5}]$ | BRM Grade | −40 |  | +125 | °C |

$[^{1}]$: Total voltage noise = $\sqrt{e_{ni}^{2} + (e_{no}/G)^{2} + e_{RG}^{2}}$. See the Theory of Operation section for more information.

$[^{2}]$: Total RTI $V_{OS}$ = ($V_{OSI}$) + ($V_{OSO}$/G).

$[^{3}]$: These specifications do not include the tolerance of the external gain setting resistor, $R_{G}$. For G > 1, add $R_{G}$ errors to the specifications given in this table.

$[^{4}]$: Input voltage range of the [AD8421](http://www.analog.com/AD8421) input stage only. The input range can depend on the common-mode voltage, differential voltage, gain, and reference voltage. See the Input Voltage Range section for more details.

$[^{5}]$: See the Typical Performance Characteristics section for expected operation between 85°C and 125°C.

### ACP GRADE
<!-- page: 7 -->

**Table 3. (ACP Grade Specifications)** ([table-02-p7-spec.csv](ad8421/tables/table-02-p7-spec.csv), p. 7)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNITS |
|---|---|---|---|---|---|
| **COMMON-MODE REJECTION RATIO (CMRR)** |  |  |  |  |  |
| **CMRR DC to 60 Hz with 1 kΩ Source Imbalance** | $V_{CM}$ = −10 V to +10 V |  |  |  |  |
| G = 1 |  | 84 |  |  | dB |
| G = 10 |  | 104 |  |  | dB |
| G = 100 |  | 124 |  |  | dB |
| G = 1000 |  | 134 |  |  | dB |
| Over Temperature, G = 1 | $T_{A}$ = −40°C to +125°C | 80 |  |  | dB |
| **CMRR at 20 kHz** | $V_{CM}$ = −10 V to +10 V |  |  |  |  |
| G = 1 |  | 80 |  |  | dB |
| G = 10 |  | 90 |  |  | dB |
| G = 100 |  | 100 |  |  | dB |
| G = 1000 |  | 100 |  |  | dB |
| **NOISE** |  |  |  |  |  |
| **Voltage Noise, 1 kHz $[^{1}]$** | $V_{IN+}$, $V_{IN-}$ = 0 V |  |  |  |  |
| Input Voltage Noise, $e_{ni}$ |  |  | 3 | 3.2 | nV/√Hz |
| Output Voltage Noise, $e_{no}$ |  |  |  | 60 | nV/√Hz |
| **Peak to Peak, RTI** | f = 0.1 Hz to 10 Hz |  |  |  |  |
| G = 1 |  |  | 2 |  | µV p-p |
| G = 10 |  |  | 0.5 |  | µV p-p |
| G = 100 to 1000 |  |  | 0.07 |  | µV p-p |
| **Current Noise** |  |  |  |  |  |
| Spectral Density | f = 1 kHz |  | 200 |  | fA/√Hz |
| Peak to Peak, RTI | f = 0.1 Hz to 10 Hz |  | 18 |  | pA p-p |
| **VOLTAGE OFFSET $[^{2}]$** |  |  |  |  |  |
| Input Offset Voltage, $V_{OSI}$ | $V_{S}$ = ±5 V to ±15 V |  |  | 70 | µV |
| Over Temperature | $T_{A}$ = −40°C to +125°C |  |  | 135 | µV |
| Average TC |  |  |  | 0.9 | µV/°C |
| Output Offset Voltage, $V_{OSO}$ |  |  |  | 600 | µV |
| Over Temperature | $T_{A}$ = −40°C to +125°C |  |  | 1 | mV |
| Average TC |  |  |  | 9 | µV/°C |
| **Offset RTI vs. Supply (PSR)** | $V_{S}$ = ±2.5 V to ±18 V |  |  |  |  |
| G = 1 |  | 90 | 120 |  | dB |
| G = 10 |  | 110 | 120 |  | dB |
| G = 100 |  | 124 | 130 |  | dB |
| G = 1000 |  | 130 | 140 |  | dB |
| **INPUT CURRENT** |  |  |  |  |  |
| Input Bias Current |  |  | 1 | 2 | nA |
| Over Temperature | $T_{A}$ = −40°C to +125°C |  |  | 8 | nA |
| Average TC |  |  | 50 |  | pA/°C |
| Input Offset Current |  |  | 0.5 | 2 | nA |
| Over Temperature | $T_{A}$ = −40°C to +125°C |  |  | 3 | nA |
| Average TC |  |  | 1 |  | pA/°C |
| **DYNAMIC RESPONSE** |  |  |  |  |  |
| **Small Signal Bandwidth** | −3 dB |  |  |  |  |
| G = 1 |  |  | 10 |  | MHz |
| G = 10 |  |  | 10 |  | MHz |
| G = 100 |  |  | 2 |  | MHz |
| G = 1000 |  |  | 0.2 |  | MHz |
| **Settling Time 0.01%** | 10 V step |  |  |  |  |
| G = 1 |  |  | 0.7 |  | µs |
| G = 10 |  |  | 0.4 |  | µs |
| G = 100 |  |  | 0.6 |  | µs |
| G = 1000 |  |  | 5 |  | µs |
| **Settling Time 0.001%** | 10 V step |  |  |  |  |
| G = 1 |  |  | 1 |  | µs |
| G = 10 |  |  | 0.6 |  | µs |
| G = 100 |  |  | 0.8 |  | µs |
| G = 1000 |  |  | 6 |  | µs |
| **Slew Rate** |  |  |  |  |  |
| G = 1 to 100 |  |  | 35 |  | V/µs |
| **GAIN $[^{3}]$** | G = 1 + (9.9 kΩ/$R_{G}$) |  |  |  |  |
| Gain Range |  | 1 |  | 10,000 | V/V |
| **Gain Error** | $V_{OUT}$ = ±10 V |  |  |  |  |
| G = 1 |  |  |  | 0.03 | % |
| G = 10 to 1000 |  |  |  | 0.3 | % |
| **Gain Nonlinearity** | $V_{OUT}$ = −10 V to +10 V |  |  |  |  |
| G = 1 | $R_{L}$ ≥ 2 kΩ |  |  | 1 | ppm |
| G = 1 | $R_{L}$ = 600 Ω |  | 1 | 3 | ppm |
| G = 10 to 1000 | $R_{L}$ ≥ 600 Ω |  | 30 | 50 | ppm |
| G = 10 to 1000 | $V_{OUT}$ = −5 V to +5 V |  | 5 | 10 | ppm |
| **Gain vs. Temperature $[^{3}]$** | $T_{A}$ = −40°C to +125°C |  |  |  |  |
| G = 1 |  |  |  | 1 | ppm/°C |
| G > 1 |  |  |  | −50 | ppm/°C |
| **INPUT** |  |  |  |  |  |
| **Input Impedance** |  |  |  |  |  |
| Differential |  |  | 30\|\|3 |  | GΩ\|\|pF |
| Common Mode |  |  | 30\|\|3 |  | GΩ\|\|pF |
| Input Operating Voltage Range $[^{4}]$ | $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 2.3 |  | +$V_{S}$ − 1.8 | V |
| Over Temperature | $T_{A}$ = −40°C | −$V_{S}$ + 2.5 |  | +$V_{S}$ − 2.0 | V |
| Over Temperature  | $T_{A}$ = +125°C | −$V_{S}$ + 2.4 |  | +$V_{S}$ − 2.1 | V |
| **OUTPUT** | $R_{L}$ = 2 kΩ |  |  |  |  |
| Output Swing | $V_{S}$ = ±2.5 V to ±18 V | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.7 | V |
| Over Temperature | $T_{A}$ = −40°C to +125°C | −$V_{S}$ + 1.2 |  | +$V_{S}$ − 1.9 | V |
| Short-Circuit Current |  |  | 65 |  | mA |
| **REFERENCE INPUT** |  |  |  |  |  |
| $R_{IN}$ |  |  | 20 |  | kΩ |
| $I_{IN}$ | $V_{IN+}$, $V_{IN-}$ = 0 V |  | 20 | 24 | µA |
| Voltage Range |  | −$V_{S}$ |  | +$V_{S}$ | V |
| Reference Gain to Output |  |  | 1 ± 0.0001 |  | V/V |
| **POWER SUPPLY** |  |  |  |  |  |
| Operating Range | Dual supply | ±2.5 |  | ±18 | V |
| Operating Range | Single supply | 5 |  | 36 | V |
| Quiescent Current |  |  | 2 | 2.3 | mA |
| Over Temperature | $T_{A}$ = −40°C to +125°C |  |  | 2.6 | mA |
| **TEMPERATURE RANGE** |  |  |  |  |  |
| For Specified Performance |  | −40 |  | +125 | °C |
| Operational |  | −40 |  | +125 | °C |

$[^{1}]$: Total voltage noise = $\sqrt{e_{ni}^{2} + (e_{no}/G)^{2} + e_{RG}^{2}}$. See the Theory of Operation section for more information.

$[^{2}]$: Total RTI $V_{OS}$ = ($V_{OSI}$) + ($V_{OSO}$/G).

$[^{3}]$: These specifications do not include the tolerance of the external gain setting resistor, $R_{G}$. For G > 1, add $R_{G}$ errors to the specifications given in this table.

$[^{4}]$: Input voltage range of the [AD8421](http://www.analog.com/AD8421) input stage only. The input range can depend on the common-mode voltage, differential voltage, gain, and reference voltage. See the Input Voltage Range section for more information.

### ABSOLUTE MAXIMUM RATINGS
<!-- page: 10 -->

**Table 4. (Absolute Maximum Ratings)** ([table-03-p10-abs_max.csv](ad8421/tables/table-03-p10-abs_max.csv), p. 10)

| PARAMETER | RATING |
|---|---|
| Supply Voltage | ±18 V |
| Output Short-Circuit Current Duration | Indefinite |
| Maximum Voltage at −IN or +IN $[^{1}]$ | −$V_{S}$ + 40 V |
| Minimum Voltage at −IN or +IN | +$V_{S}$ − 40 V |
| Maximum Voltage at REF $[^{2}]$ | +$V_{S}$ + 0.3 V |
| Minimum Voltage at REF | −$V_{S}$ − 0.3 V |
| Storage Temperature Range | −65°C to +150°C |
| Operating Temperature Range | −40°C to +125°C |
| Maximum Junction Temperature | 150°C |
| **ESD** |  |
| Human Body Model | 2 kV |
| Charged Device Model | 1.25 kV |
| Machine Model | 0.2 kV |

$[^{1}]$: For voltages beyond these limits, use input protection resistors. See the Theory of Operation section for more information.

$[^{2}]$: There are ESD protection diodes from the reference input to each supply, so REF cannot be driven beyond the supplies in the same way that +IN and −IN can. See the Reference Terminal section for more information.

Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability.

### THERMAL RESISTANCE
<!-- page: 10 -->

$\theta_{JA}$ is specified for a device in free air using a 4-layer JEDEC printed circuit board (PCB).

**Table 5. (Thermal Resistance)** ([table-04-p10-data.csv](ad8421/tables/table-04-p10-data.csv), p. 10)

| Package | $\theta_{JA}$ | Unit |
|---|---|---|
| 8-Lead SOIC | 107.8 | °C/W |
| 8-Lead MSOP | 138.6 | °C/W |
| 8-Lead LFCSP | 53.65 | °C/W |

### ESD CAUTION
<!-- pages: 10-11 -->

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

### PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
<!-- pages: 11-12 -->

![Figure 3. 8-Lead SOIC and 8-Lead MSOP Pin Configuration](ad8421/figures/ad8421-f004.png)

*Figure 3. 8-Lead SOIC and 8-Lead MSOP Pin Configuration*

![Figure 4. 8-Lead LFCSP Pin Configuration](ad8421/figures/ad8421-f005.png)

*Figure 4. 8-Lead LFCSP Pin Configuration*

### Table 6. Pin Function Descriptions
<!-- page: 11 -->

**Table 6. Pin Function Descriptions** ([table-05-p11-pin.csv](ad8421/tables/table-05-p11-pin.csv), p. 11)

| NUMBER | NAME | DESCRIPTION |
|---|---|---|
| 1 | −IN | Negative Input Terminal. |
| 2, 3 | $R_{G}$ | Gain Setting Terminals. Place resistor across the $R_{G}$ pins to set the gain. G = 1 + (9.9 kΩ/$R_{G}$). |
| 4 | +IN | Positive Input Terminal. |
| 5 | −$V_{S}$ | Negative Power Supply Terminal. |
| 6 | REF | Reference Voltage Terminal. Drive this terminal with a low impedance voltage source to level shift the output. |
| 7 | $V_{OUT}$ | Output Terminal. |
| 8 | +$V_{S}$ | Positive Power Supply Terminal. |

### TYPICAL PERFORMANCE CHARACTERISTICS
<!-- pages: 12-22 -->

$T_{A}$ = 25°C, $V_{S}$ = ±15 V, $V_{REF}$ = 0 V, $R_{L}$ = 2 kΩ, unless otherwise noted.

*[Equation not captured in extraction — see the PDF.]*

![Figure 5. Typical Distribution of Input Offset Voltage](ad8421/figures/ad8421-f006.png)

*Figure 5. Typical Distribution of Input Offset Voltage*

Digitized data: [typical-distribution-of-input-offset-voltage.csv](ad8421/curves/typical-distribution-of-input-offset-voltage.csv) (x: µV; y: UNITS) — values read off the printed plot by the digitizer, not published data.

![Figure 6. Typical Distribution of Input Bias Current](ad8421/figures/ad8421-f007.png)

*Figure 6. Typical Distribution of Input Bias Current*

Digitized data: [typical-distribution-of-input-bias-current.csv](ad8421/curves/typical-distribution-of-input-bias-current.csv) (x: nA; y: UNITS) — values read off the printed plot by the digitizer, not published data.

![Figure 7. Typical Distribution of PSRR (G = 1)](ad8421/figures/ad8421-f008.png)

*Figure 7. Typical Distribution of PSRR (G = 1)*

Digitized data: [typical-distribution-of-psrr-g-1.csv](ad8421/curves/typical-distribution-of-psrr-g-1.csv) (x: µV/V; y: UNITS) — values read off the printed plot by the digitizer, not published data.

![Figure 8. Typical Distribution of Output Offset Voltage](ad8421/figures/ad8421-f009.png)

*Figure 8. Typical Distribution of Output Offset Voltage*

Digitized data: [typical-distribution-of-output-offset-voltage.csv](ad8421/curves/typical-distribution-of-output-offset-voltage.csv) (x: µV; y: UNITS) — values read off the printed plot by the digitizer, not published data.

![Figure 9. Typical Distribution of Input Offset Current](ad8421/figures/ad8421-f010.png)

*Figure 9. Typical Distribution of Input Offset Current*

Digitized data: [typical-distribution-of-input-offset-current.csv](ad8421/curves/typical-distribution-of-input-offset-current.csv) (x: nA; y: UNITS) — values read off the printed plot by the digitizer, not published data.

![Figure 10. Typical Distribution of CMRR (G = 1)](ad8421/figures/ad8421-f011.png)

*Figure 10. Typical Distribution of CMRR (G = 1)*

Digitized data: [typical-distribution-of-cmrr-g-1.csv](ad8421/curves/typical-distribution-of-cmrr-g-1.csv) (x: µV/V; y: UNITS) — values read off the printed plot by the digitizer, not published data.

![Figure 11. Input Common-Mode Voltage vs. Output Voltage; VS = ±12 V and ±15 V (G = 1)](ad8421/figures/ad8421-f012.png)

*Figure 11. Input Common-Mode Voltage vs. Output Voltage; $V_{S}$ = ±12 V and ±15 V (G = 1)*

Digitized data: [input-common-mode-voltage-vs-output-voltage-vs-12-v-and-15-v-g-1.csv](ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-12-v-and-15-v-g-1.csv) (x: V; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 12. Input Common-Mode Voltage vs. Output Voltage; VS = ±2.5 V and ±5 V (G = 1)](ad8421/figures/ad8421-f013.png)

*Figure 12. Input Common-Mode Voltage vs. Output Voltage; $V_{S}$ = ±2.5 V and ±5 V (G = 1)*

Digitized data: [input-common-mode-voltage-vs-output-voltage-vs-2-5-v-and-5-v-g-1.csv](ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-2-5-v-and-5-v-g-1.csv) (x: V; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 13. Input Common-Mode Voltage vs. Output Voltage; VS = ±12 V and ±15 V (G = 100)](ad8421/figures/ad8421-f014.png)

*Figure 13. Input Common-Mode Voltage vs. Output Voltage; $V_{S}$ = ±12 V and ±15 V (G = 100)*

Digitized data: [input-common-mode-voltage-vs-output-voltage-vs-12-v-and-15-v-g-100.csv](ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-12-v-and-15-v-g-100.csv) (x: V; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 14. Input Common-Mode Voltage vs. Output Voltage; VS = ±2.5 V and ±5 V (G = 100)](ad8421/figures/ad8421-f015.png)

*Figure 14. Input Common-Mode Voltage vs. Output Voltage; $V_{S}$ = ±2.5 V and ±5 V (G = 100)*

Digitized data: [input-common-mode-voltage-vs-output-voltage-vs-2-5-v-and-5-v-g-100.csv](ad8421/curves/input-common-mode-voltage-vs-output-voltage-vs-2-5-v-and-5-v-g-100.csv) (x: V; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 15. Input Overvoltage Performance; G = 1, +VS = 5 V, -VS = 0 V](ad8421/figures/ad8421-f016.png)

*Figure 15. Input Overvoltage Performance; G = 1, +$V_{S}$ = 5 V, -VS = 0 V*

Digitized data: [input-overvoltage-performance-g-1-vs-5-v-vs-0-v.csv](ad8421/curves/input-overvoltage-performance-g-1-vs-5-v-vs-0-v.csv) (x: V; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 16. Input Overvoltage Performance; G = 1, VS = ±15 V](ad8421/figures/ad8421-f017.png)

*Figure 16. Input Overvoltage Performance; G = 1, $V_{S}$ = ±15 V*

Digitized data: [input-overvoltage-performance-g-1-vs-15-v.csv](ad8421/curves/input-overvoltage-performance-g-1-vs-15-v.csv) (x: V; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 17. Input Overvoltage Performance; +VS = 5 V, -VS = 0 V, G = 100](ad8421/figures/ad8421-f018.png)

*Figure 17. Input Overvoltage Performance; +$V_{S}$ = 5 V, -$V_{S}$ = 0 V, G = 100*

Digitized data: [input-overvoltage-performance-vs-5-v-vs-0-v-g-100.csv](ad8421/curves/input-overvoltage-performance-vs-5-v-vs-0-v-g-100.csv) (x: V; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 18. Input Overvoltage Performance; VS = ±15 V, G = 100](ad8421/figures/ad8421-f019.png)

*Figure 18. Input Overvoltage Performance; $V_{S}$ = ±15 V, G = 100*

Digitized data: [input-overvoltage-performance-vs-15-v-g-100.csv](ad8421/curves/input-overvoltage-performance-vs-15-v-g-100.csv) (x: V; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 19. Input Bias Current vs. Common-Mode Voltage](ad8421/figures/ad8421-f020.png)

*Figure 19. Input Bias Current vs. Common-Mode Voltage*

Digitized data: [input-bias-current-vs-common-mode-voltage.csv](ad8421/curves/input-bias-current-vs-common-mode-voltage.csv) (x: V; y: nA) — values read off the printed plot by the digitizer, not published data.

![Figure 20. Positive PSRR vs. Frequency](ad8421/figures/ad8421-f021.png)

*Figure 20. Positive PSRR vs. Frequency*

Digitized data: [positive-psrr-vs-frequency.csv](ad8421/curves/positive-psrr-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 21. Negative PSRR vs. Frequency](ad8421/figures/ad8421-f022.png)

*Figure 21. Negative PSRR vs. Frequency*

Digitized data: [negative-psrr-vs-frequency.csv](ad8421/curves/negative-psrr-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 22. Gain vs. Frequency](ad8421/figures/ad8421-f023.png)

*Figure 22. Gain vs. Frequency*

Digitized data: [gain-vs-frequency.csv](ad8421/curves/gain-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 23. CMRR vs. Frequency](ad8421/figures/ad8421-f024.png)

*Figure 23. CMRR vs. Frequency*

Digitized data: [cmrr-vs-frequency.csv](ad8421/curves/cmrr-vs-frequency.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 24. CMRR vs. Frequency, 1 kΩ Source Imbalance](ad8421/figures/ad8421-f025.png)

*Figure 24. CMRR vs. Frequency, 1 kΩ Source Imbalance*

Digitized data: [cmrr-vs-frequency-1-k-source-imbalance.csv](ad8421/curves/cmrr-vs-frequency-1-k-source-imbalance.csv) (x: Hz; y: dB) — values read off the printed plot by the digitizer, not published data.

![Figure 25. Change in Input Offset Voltage (VOSI) vs. Warm-Up Time](ad8421/figures/ad8421-f026.png)

*Figure 25. Change in Input Offset Voltage (VOSI) vs. Warm-Up Time*

Digitized data: [change-in-input-offset-voltage-vosi-vs-warm-up-time.csv](ad8421/curves/change-in-input-offset-voltage-vosi-vs-warm-up-time.csv) (x: Seconds; y: µV) — values read off the printed plot by the digitizer, not published data.

![Figure 26. Input Bias Current vs. Temperature](ad8421/figures/ad8421-f027.png)

*Figure 26. Input Bias Current vs. Temperature*

Digitized data: [input-bias-current-vs-temperature.csv](ad8421/curves/input-bias-current-vs-temperature.csv) (x: °C; y: nA) — values read off the printed plot by the digitizer, not published data.

![Figure 27. Gain vs. Temperature (G = 1)](ad8421/figures/ad8421-f028.png)

*Figure 27. Gain vs. Temperature (G = 1)*

Digitized data: [gain-vs-temperature-g-1.csv](ad8421/curves/gain-vs-temperature-g-1.csv) (x: °C; y: µV/V) — values read off the printed plot by the digitizer, not published data.

![Figure 28. CMRR vs. Temperature (G = 1)](ad8421/figures/ad8421-f029.png)

*Figure 28. CMRR vs. Temperature (G = 1)*

Digitized data: [cmrr-vs-temperature-g-1.csv](ad8421/curves/cmrr-vs-temperature-g-1.csv) (x: °C; y: µV/V) — values read off the printed plot by the digitizer, not published data.

![Figure 29. Supply Current vs. Temperature (G = 1)](ad8421/figures/ad8421-f030.png)

*Figure 29. Supply Current vs. Temperature (G = 1)*

Digitized data: [supply-current-vs-temperature-g-1.csv](ad8421/curves/supply-current-vs-temperature-g-1.csv) (x: °C; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 30. Short-Circuit Current vs. Temperature (G = 1)](ad8421/figures/ad8421-f031.png)

*Figure 30. Short-Circuit Current vs. Temperature (G = 1)*

Digitized data: [short-circuit-current-vs-temperature-g-1.csv](ad8421/curves/short-circuit-current-vs-temperature-g-1.csv) (x: °C; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 31. Slew Rate vs. Temperature, VS = ±15 V (G = 1)](ad8421/figures/ad8421-f032.png)

*Figure 31. Slew Rate vs. Temperature, $V_{S}$ = ±15 V (G = 1)*

Digitized data: [slew-rate-vs-temperature-vs-15-v-g-1.csv](ad8421/curves/slew-rate-vs-temperature-vs-15-v-g-1.csv) (x: °C; y: V/µs) — values read off the printed plot by the digitizer, not published data.

![Figure 32. Slew Rate vs. Temperature, VS = ±5 V (G = 1)](ad8421/figures/ad8421-f033.png)

*Figure 32. Slew Rate vs. Temperature, $V_{S}$ = ±5 V (G = 1)*

Digitized data: [slew-rate-vs-temperature-vs-5-v-g-1.csv](ad8421/curves/slew-rate-vs-temperature-vs-5-v-g-1.csv) (x: °C; y: V/µs) — values read off the printed plot by the digitizer, not published data.

![Figure 33. Input Voltage Limit vs. Supply Voltage](ad8421/figures/ad8421-f034.png)

*Figure 33. Input Voltage Limit vs. Supply Voltage*

Digitized data: [input-voltage-limit-vs-supply-voltage.csv](ad8421/curves/input-voltage-limit-vs-supply-voltage.csv) (x: ±$V_{S}$ (V); y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 34. Output Voltage Swing vs. Supply Voltage, RL = 10 kΩ](ad8421/figures/ad8421-f035.png)

*Figure 34. Output Voltage Swing vs. Supply Voltage, $R_{L}$ = 10 kΩ*

Digitized data: [output-voltage-swing-vs-supply-voltage-rl-10-k.csv](ad8421/curves/output-voltage-swing-vs-supply-voltage-rl-10-k.csv) (x: V (±$V_{S}$); y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 35. Output Voltage Swing vs. Supply Voltage, RL = 600 Ω](ad8421/figures/ad8421-f036.png)

*Figure 35. Output Voltage Swing vs. Supply Voltage, $R_{L}$ = 600 Ω*

Digitized data: [output-voltage-swing-vs-supply-voltage-rl-600.csv](ad8421/curves/output-voltage-swing-vs-supply-voltage-rl-600.csv) (x: V; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 36. Output Voltage Swing vs. Load Resistance](ad8421/figures/ad8421-f037.png)

*Figure 36. Output Voltage Swing vs. Load Resistance*

Digitized data: [output-voltage-swing-vs-load-resistance.csv](ad8421/curves/output-voltage-swing-vs-load-resistance.csv) (x: Ω; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 37. Output Voltage Swing vs. Output Current](ad8421/figures/ad8421-f038.png)

*Figure 37. Output Voltage Swing vs. Output Current*

Digitized data: [output-voltage-swing-vs-output-current.csv](ad8421/curves/output-voltage-swing-vs-output-current.csv) (x: A; y: V) — values read off the printed plot by the digitizer, not published data.

![Figure 38. Gain Nonlinearity (G = 1), RL = 10 kΩ, 2 kΩ](ad8421/figures/ad8421-f039.png)

*Figure 38. Gain Nonlinearity (G = 1), $R_{L}$ = 10 kΩ, 2 kΩ*

Digitized data: [gain-nonlinearity-g-1-rl-10-k-2-k.csv](ad8421/curves/gain-nonlinearity-g-1-rl-10-k-2-k.csv) (x: V; y: ppm) — values read off the printed plot by the digitizer, not published data.

![Figure 39. Gain Nonlinearity (G = 1), RL = 600 Ω](ad8421/figures/ad8421-f040.png)

*Figure 39. Gain Nonlinearity (G = 1), $R_{L}$ = 600 Ω*

Digitized data: [gain-nonlinearity-g-1-rl-600.csv](ad8421/curves/gain-nonlinearity-g-1-rl-600.csv) (x: V; y: ppm) — values read off the printed plot by the digitizer, not published data.

![Figure 40. Gain Nonlinearity (G = 1000), RL = 600 Ω, VOUT = ±10 V](ad8421/figures/ad8421-f041.png)

*Figure 40. Gain Nonlinearity (G = 1000), $R_{L}$ = 600 Ω, $V_{OUT}$ = ±10 V*

Digitized data: [gain-nonlinearity-g-1000-rl-600-vout-10-v.csv](ad8421/curves/gain-nonlinearity-g-1000-rl-600-vout-10-v.csv) (x: V; y: ppm) — values read off the printed plot by the digitizer, not published data.

![Figure 41. Gain Nonlinearity (G = 1000), RL = 600 Ω, VOUT = ±5 V](ad8421/figures/ad8421-f042.png)

*Figure 41. Gain Nonlinearity (G = 1000), $R_{L}$ = 600 Ω, $V_{OUT}$ = ±5 V*

Digitized data: [gain-nonlinearity-g-1000-rl-600-vout-5-v.csv](ad8421/curves/gain-nonlinearity-g-1000-rl-600-vout-5-v.csv) (x: V; y: ppm) — values read off the printed plot by the digitizer, not published data.

![Figure 42. RTI Voltage Noise Spectral Density vs. Frequency](ad8421/figures/ad8421-f043.png)

*Figure 42. RTI Voltage Noise Spectral Density vs. Frequency*

Digitized data: [rti-voltage-noise-spectral-density-vs-frequency.csv](ad8421/curves/rti-voltage-noise-spectral-density-vs-frequency.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 43. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1, G = 1000)](ad8421/figures/ad8421-f044.png)

*Figure 43. 0.1 Hz to 10 Hz RTI Voltage Noise (G = 1, G = 1000)*

![Figure 44. Current Noise Spectral Density vs. Frequency](ad8421/figures/ad8421-f045.png)

*Figure 44. Current Noise Spectral Density vs. Frequency*

Digitized data: [current-noise-spectral-density-vs-frequency.csv](ad8421/curves/current-noise-spectral-density-vs-frequency.csv) (x: Hz; y: fA/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 45. 0.1 Hz to 10 Hz Current Noise](ad8421/figures/ad8421-f046.png)

*Figure 45. 0.1 Hz to 10 Hz Current Noise*

![Figure 46. Large Signal Frequency Response](ad8421/figures/ad8421-f047.png)

*Figure 46. Large Signal Frequency Response*

Digitized data: [large-signal-frequency-response.csv](ad8421/curves/large-signal-frequency-response.csv) (x: Hz; y: V p-p) — values read off the printed plot by the digitizer, not published data.

![Figure 47. Large Signal Pulse Response and Settling Time (G = 1), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF](ad8421/figures/ad8421-f048.png)

*Figure 47. Large Signal Pulse Response and Settling Time (G = 1), 10 V Step, $V_{S}$ = ±15 V, $R_{L}$ = 2 kΩ, $C_{L}$ = 100 pF*

![Figure 48. Large Signal Pulse Response and Settling Time (G = 10), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF](ad8421/figures/ad8421-f049.png)

*Figure 48. Large Signal Pulse Response and Settling Time (G = 10), 10 V Step, $V_{S}$ = ±15 V, $R_{L}$ = 2 kΩ, $C_{L}$ = 100 pF*

![Figure 49. Large Signal Pulse Response and Settling Time (G = 100), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF](ad8421/figures/ad8421-f050.png)

*Figure 49. Large Signal Pulse Response and Settling Time (G = 100), 10 V Step, $V_{S}$ = ±15 V, $R_{L}$ = 2 kΩ, $C_{L}$ = 100 pF*

![Figure 50. Large Signal Pulse Response and Settling Time (G = 1000), 10 V Step, VS = ±15 V, RL = 2 kΩ, CL = 100 pF](ad8421/figures/ad8421-f051.png)

*Figure 50. Large Signal Pulse Response and Settling Time (G = 1000), 10 V Step, $V_{S}$ = ±15 V, $R_{L}$ = 2 kΩ, $C_{L}$ = 100 pF*

![Figure 51. Settling Time vs. Step Size (G = 1), RL = 2 kΩ, CL = 100 pF](ad8421/figures/ad8421-f052.png)

*Figure 51. Settling Time vs. Step Size (G = 1), $R_{L}$ = 2 kΩ, $C_{L}$ = 100 pF*

Digitized data: [settling-time-vs-step-size-g-1-rl-2-k-cl-100-pf.csv](ad8421/curves/settling-time-vs-step-size-g-1-rl-2-k-cl-100-pf.csv) (x: V; y: ns) — values read off the printed plot by the digitizer, not published data.

![Figure 52. Small Signal Pulse Response (G = 1), RL = 600 Ω, CL = 100 pF](ad8421/figures/ad8421-f053.png)

*Figure 52. Small Signal Pulse Response (G = 1), $R_{L}$ = 600 Ω, $C_{L}$ = 100 pF*

![Figure 53. Small Signal Pulse Response (G = 10), RL = 600 Ω, CL = 100 pF](ad8421/figures/ad8421-f054.png)

*Figure 53. Small Signal Pulse Response (G = 10), $R_{L}$ = 600 Ω, $C_{L}$ = 100 pF*

![Figure 54. Small Signal Pulse Response (G = 100), RL = 600 Ω, CL = 100 pF](ad8421/figures/ad8421-f055.png)

*Figure 54. Small Signal Pulse Response (G = 100), $R_{L}$ = 600 Ω, $C_{L}$ = 100 pF*

![Figure 55. Small Signal Pulse Response (G = 1000), RL = 600 Ω, CL = 100 pF](ad8421/figures/ad8421-f056.png)

*Figure 55. Small Signal Pulse Response (G = 1000), $R_{L}$ = 600 Ω, $C_{L}$ = 100 pF*

![Figure 56. Small Signal Response with Various Capacitive Loads (G = 1), RL = Infinity](ad8421/figures/ad8421-f057.png)

*Figure 56. Small Signal Response with Various Capacitive Loads (G = 1), $R_{L}$ = Infinity*

![Figure 57. Second Harmonic Distortion vs. Frequency (G = 1)](ad8421/figures/ad8421-f058.png)

*Figure 57. Second Harmonic Distortion vs. Frequency (G = 1)*

Digitized data: [second-harmonic-distortion-vs-frequency-g-1.csv](ad8421/curves/second-harmonic-distortion-vs-frequency-g-1.csv) (x: Hz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 58. Third Harmonic Distortion vs. Frequency (G = 1)](ad8421/figures/ad8421-f059.png)

*Figure 58. Third Harmonic Distortion vs. Frequency (G = 1)*

Digitized data: [third-harmonic-distortion-vs-frequency-g-1.csv](ad8421/curves/third-harmonic-distortion-vs-frequency-g-1.csv) — values read off the printed plot by the digitizer, not published data.

![Figure 59. Second Harmonic Distortion vs. Frequency (G = 1000)](ad8421/figures/ad8421-f060.png)

*Figure 59. Second Harmonic Distortion vs. Frequency (G = 1000)*

Digitized data: [second-harmonic-distortion-vs-frequency-g-1000.csv](ad8421/curves/second-harmonic-distortion-vs-frequency-g-1000.csv) (x: Hz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 60. Third Harmonic Distortion vs. Frequency (G = 1000)](ad8421/figures/ad8421-f061.png)

*Figure 60. Third Harmonic Distortion vs. Frequency (G = 1000)*

Digitized data: [third-harmonic-distortion-vs-frequency-g-1000.csv](ad8421/curves/third-harmonic-distortion-vs-frequency-g-1000.csv) (x: Hz; y: dBc) — values read off the printed plot by the digitizer, not published data.

![Figure 61. THD vs. Frequency](ad8421/figures/ad8421-f062.png)

*Figure 61. THD vs. Frequency*

Digitized data: [thd-vs-frequency.csv](ad8421/curves/thd-vs-frequency.csv) (x: Hz; y: dBc) — values read off the printed plot by the digitizer, not published data.

### THEORY OF OPERATION
<!-- pages: 22-23 -->

![Figure 62. Simplified Schematic](ad8421/figures/ad8421-f063.png)

*Figure 62. Simplified Schematic*

### ARCHITECTURE
<!-- page: 22 -->

The [AD8421](http://www.analog.com/AD8421) is based on the classic 3-op-amp topology. This topology has two stages: a preamplifier to provide differential amplification, followed by a difference amplifier that removes the common-mode voltage. Figure 62 shows a simplified schematic of the [AD8421](http://www.analog.com/AD8421).

Topologically, Q1, A1, R1 and Q2, A2, R2 can be viewed as precision current feedback amplifiers. Input Transistors Q1 and Q2 are biased at a fixed current so that any input signal forces the output voltages of A1 and A2 to change accordingly. The differential signal applied to the inputs is replicated across the RG pins. Any current through RG also flows through R1 and R2, creating a gained differential voltage between Node 1 and Node 2.

The amplified differential and common-mode signals are applied to a difference amplifier that rejects the common-mode voltage but preserves the amplified differential voltage. The difference amplifier employs innovations that result in very low output errors such as offset voltage and drift, distortion at various loads, as well as output noise. Laser-trimmed resistors allow for a highly accurate in-amp with gain error less than 0.01% and CMRR that exceeds 94 dB (G = 1). The high performance pinout and special attention given to design and layout allow for high CMRR performance across a wide frequency and temperature range.

Using superbeta input transistors and bias current compensation, the [AD8421](http://www.analog.com/AD8421) offers extremely high input impedance, low bias current, low offset current, low current noise, and extremely low voltage noise of 3 nV/√Hz. The current-limiting and overvoltage protection scheme allow the input to go 40 V from the opposite rail at all gains without compromising the noise performance.

The transfer function of the [AD8421](http://www.analog.com/AD8421) is

![Equation as printed (p. 22)](ad8421/figures/ad8421-eq01.png)

$$V_{OUT} = G \times ( V_{+ IN} - V_{-IN} ) + V_{REF} \\ \text{, where } G = 1 + \frac{9.9 k \Omega}{R_{G}}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*


Users can easily and accurately set the gain using a single standard resistor.

### GAIN SELECTION
<!-- page: 22 -->

Placing a resistor across the RG terminals sets the gain of the [AD8421](http://www.analog.com/AD8421). The gain can be calculated by referring to Error! Reference source not found. or by using the following gain equation:

![Equation as printed (p. 22)](ad8421/figures/ad8421-eq03.png)

$$R_{G} = \frac{9.9 k \Omega}{G - 1}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

The [AD8421](http://www.analog.com/AD8421) defaults to G = 1 when no gain resistor is used. To determine the total gain accuracy of the system, add the tolerance and gain drift of the RG resistor to the specifications of the [AD8421](http://www.analog.com/AD8421). When the gain resistor is not used, gain error and gain drift are minimal.

**Table 7. Gains Achieved Using 1% Resistors** ([table-06-p22-data.csv](ad8421/tables/table-06-p22-data.csv), p. 22)

| 1% Standard Table Value of $R_{G}$ | Calculated Gain |
|---|---|
| 10 kΩ | 1.99 |
| 2.49 kΩ | 4.98 |
| 1.1 kΩ | 10.00 |
| 523 Ω | 19.93 |
| 200 Ω | 50.50 |
| 100 Ω | 100.0 |
| 49.9 Ω | 199.4 |
| 20 Ω | 496.0 |
| 10 Ω | 991.0 |
| 4.99 Ω | 1985 |

### RG Power Dissipation
<!-- page: 22 -->

The [AD8421](http://www.analog.com/AD8421) duplicates the differential voltage across its inputs onto the RG resistor. Choose an RG resistor size that is sufficient to handle the expected power dissipation at ambient temperature.

### REFERENCE TERMINAL
<!-- pages: 23-24 -->

The output voltage of the [AD8421](http://www.analog.com/AD8421) is developed with respect to the potential on the reference terminal. This can be used to sense the ground at the load, thereby taking advantage of the CMRR to reject ground noise or to introduce a precise offset to the signal at the output. For example, a voltage source can be tied to the REF pin to level shift the output, allowing the [AD8421](http://www.analog.com/AD8421) to drive a singlesupply ADC. The REF pin is protected with ESD diodes and should not exceed either +VS or -VS by more than 0.3 V.

For best performance, maintain a source impedance to the REF terminal that is below 1 Ω. As shown in Figure 62, the reference terminal, REF, is at one end of a 10 kΩ resistor. Additional impedance at the REF terminal adds to this 10 kΩ resistor and results in amplification of the signal connected to the positive input. The amplification from the additional RREF can be calculated as follows:

![Equation as printed (p. 23)](ad8421/figures/ad8421-eq04.png)

$$\frac{2(10\,\mathrm{k}\Omega + R_{\mathrm{REF}})}{20\,\mathrm{k}\Omega + R_{\mathrm{REF}}}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

Only the positive signal path is amplified; the negative path is unaffected. This uneven amplification degrades CMRR.

![Figure 63. Driving the Reference Pin](ad8421/figures/ad8421-f064.png)

*Figure 63. Driving the Reference Pin*

### INPUT VOLTAGE RANGE
<!-- page: 23 -->

The 3-op-amp architecture of the [AD8421](http://www.analog.com/AD8421) applies gain in the first stage before removing the common-mode voltage in the difference amplifier stage. Internal nodes between the first and second stages (Node 1 and Node 2 in Figure 62) experience a combination of a gained signal, a common-mode signal, and a diode drop. The voltage supplies can limit the combined signal, even when the individual input and output signals are not limited. Figure 11 through Figure 14 show this limitation in detail.

### LAYOUT

To ensure optimum performance of the [AD8421](http://www.analog.com/AD8421) at the PCB level, care must be taken in the design of the board layout. The pins of the [AD8421](http://www.analog.com/AD8421) are arranged in a logical manner to aid in this task.

![Figure 64. Pin Configuration Diagram](ad8421/figures/ad8421-f065.png)

*Figure 64. Pin Configuration Diagram*

### Common-Mode Rejection Ratio over Frequency
<!-- page: 23 -->

Poor layout can cause some of the common-mode signals to be converted to differential signals before reaching the in-amp. Such conversions occur when one input path has a frequency response that is different from the other. To maintain high CMRR over frequency, closely match the input source impedance and capacitance of each path. Place additional source resistance in the input path (for example, input protection resistors) close to the in-amp inputs, to minimize the interaction of the resistance with parasitic capacitance from the PCB traces.

Parasitic capacitance at the gain setting pins (RG) can also affect CMRR over frequency. If the board design has a component at the gain setting pins (for example, a switch or jumper), choose a component such that the parasitic capacitance is as small as possible.

### Power Supplies and Grounding
<!-- page: 23 -->

Use a stable dc voltage to power the instrumentation amplifier. Noise on the supply pins can adversely affect performance.

Place a 0.1 µF capacitor as close as possible to each supply pin. Because the length of the bypass capacitor leads is critical at high frequency, surface-mount capacitors are recommended. Any parasitic inductance in the bypass ground trace works against the low impedance that is created by the bypass capacitor. As shown in Figure 65, a 10 µF capacitor can be used farther away from the device. For these larger value capacitors, which are intended to be effective at lower frequencies, the current return path distance is less critical. In most cases, the 10 µF capacitor can be shared by other local precision integrated circuits.

![Figure 65. Supply Decoupling, REF, and Output Referred to Local Ground](ad8421/figures/ad8421-f066.png)

*Figure 65. Supply Decoupling, REF, and Output Referred to Local Ground*

A ground plane layer helps to reduce parasitic inductances, which minimizes voltage drops with changes in current. The area of the current path is directly proportional to the magnitude of parasitic inductances and, therefore, the impedance of the path at high frequency. Large changes in currents in an inductive decoupling path or ground return create unwanted effects due to the coupling of such changes into the amplifier inputs.

Because load currents flow from the supplies, the load should be connected at the same physical location as the bypass capacitor grounds.

### Reference Pin
<!-- pages: 24-25 -->

The output voltage of the [AD8421](http://www.analog.com/AD8421) is developed with respect to the potential on the reference terminal. Ensure that REF is tied to the appropriate local ground.

### INPUT BIAS CURRENT RETURN PATH
<!-- page: 24 -->

The input bias current of the [AD8421](http://www.analog.com/AD8421) must have a return path to ground. When using a floating source without a current return path (such as a thermocouple), create a current return path as shown in Figure 66.

![Figure 66. Creating an Input Bias Current Return Path](ad8421/figures/ad8421-f067.png)

*Figure 66. Creating an Input Bias Current Return Path*

### INPUT VOLTAGES BEYOND THE SUPPLY RAILS
<!-- page: 24 -->

The [AD8421](http://www.analog.com/AD8421) has very robust inputs. It typically does not need additional input protection, as shown in Figure 67.

![Figure 67. Typical Application; No Input Protection Required](ad8421/figures/ad8421-f068.png)

*Figure 67. Typical Application; No Input Protection Required*

The [AD8421](http://www.analog.com/AD8421) inputs are current limited; therefore, input voltages can be up to 40 V from the opposite supply rail, with no input protection required at all gains. For example, if +$V_{S}$ = +5 V and -$V_{S}$ = -8 V, the part can safely withstand voltages from -35 V to +32 V.

The remaining [AD8421](http://www.analog.com/AD8421) terminals should be kept within the supplies. All terminals of the [AD8421](http://www.analog.com/AD8421) are protected against ESD.

### Input Voltages Beyond the Maximum Ratings
<!-- page: 24 -->

For applications where the [AD8421](http://www.analog.com/AD8421) encounters voltages beyond the limits in the Absolute Maximum Ratings table, external protection is required. This external protection depends on the duration of the overvoltage event and the noise performance that is required.

For short-lived events, transient protectors (such as metal oxide varistors (MOVs)), may be all that is required.

![Figure 68. Input Protection Options for Input Voltages Beyond Absolute Maximum Ratings](ad8421/figures/ad8421-f069.png)

*Figure 68. Input Protection Options for Input Voltages Beyond Absolute Maximum Ratings*

For longer events, use resistors in series with the inputs, combined with diodes. To avoid degrading bias current performance, low leakage diodes such as the BAV199 or FJH1100 are recommended. The diodes prevent the voltage at the input of the amplifier from exceeding the maximum ratings, and the resistors limit the current into the diodes. Because most external diodes can easily handle 100 mA or more, resistor values do not need to be large and, therefore, have a minimal impact on noise performance.

At the expense of some noise performance, another solution is to use series resistors. In the case of overvoltage, current into the [AD8421](http://www.analog.com/AD8421) inputs is internally limited. Although the [AD8421](http://www.analog.com/AD8421) inputs must be kept within the limits defined in the Absolute Maximum Ratings section, the I × R drop across the protection resistor increases the maximum voltage that the system can withstand, as follows:

For positive input signals

![Equation as printed (p. 24)](ad8421/figures/ad8421-eq15.png)

$$V_{\mathrm{MAX\_NEW}} = (40\,\mathrm{V} + \mathrm{Negative\ Supply}) + I_{\mathrm{IN}} \times R_{\mathrm{PROTECT}}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

For negative input signals

![Equation as printed (p. 25)](ad8421/figures/ad8421-eq05.png)

$$V_{\min_{\_NEW}} = ( Positive \ Supply - 40 \ V ) - I_{OUT} \times R_{PROTECT}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

Overvoltage performance is shown in Figure 15, Figure 16, Figure 17, and Figure 18. The [AD8421](http://www.analog.com/AD8421) inputs can withstand a current of 40 mA at room temperature for at least a day. This time is cumulative over the life of the device. If long periods of overvoltage are expected, the use of an external protection method is recommended. Under extreme input conditions, the output of the amplifier may invert.

### RADIO FREQUENCY INTERFERENCE (RFI)
<!-- pages: 25-26 -->

RF rectification is often a problem when amplifiers are used in applications that have strong RF signals. The problem is intensified if long leads or PCB traces are required to connect the amplifier to the signal source. The disturbance can appear as a dc offset voltage or a train of pulses.

High frequency signals can be filtered with a low-pass filter network at the input of the instrumentation amplifier, as shown in Figure 69.

![Figure 69. RFI Suppression](ad8421/figures/ad8421-f070.png)

*Figure 69. RFI Suppression*

The choice of resistor and capacitor values depends on the desired trade-off between noise, input impedance at high frequencies, CMRR, signal bandwidth, and RFI immunity. An RC network limits both the differential and common-mode bandwidth, as shown in the following equations:

![Equation as printed (p. 25)](ad8421/figures/ad8421-eq06.png)

$$FilterFrequency_{DIFF} = \frac{1}{2\pi R(2C_D + C_C)} \\ FilterFrequency_{CM} = \frac{1}{2\pi R C_C}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

*The source transcription left this LaTeX block open; it is closed here at the end of its paragraph — read the equation against the PDF.*
*[Equation not captured in extraction — see the PDF.]*

where $C_{D}$ ≥ 10 $C_{C}$ .

$C_{D}$ affects the differential signal, and $C_{C}$ affects the commonmode signal. A mismatch between R × $C_{C}$ at the positive input and R × $C_{C}$ at the negative input degrades the CMRR of the [AD8421](http://www.analog.com/AD8421). By using a value of $C_{D}$ that is one order of magnitude larger than $C_{D}$, the effect of the mismatch is reduced and CMRR performance is improved near the cutoff frequencies.

To achieve low noise and sufficient RFI filtering, the use of chip ferrite beads is recommended. Ferrite beads increase their impedance with frequency, thus leaving the signal of interest unaffected while preventing RF interference to reach the amplifier. They also help to eliminate the need for large resistor values in the filter, thus minimizing the system's input-referred noise. The selection of the appropriate ferrite bead and capacitor values is a function of the interference frequency, input lead length, and RF power.

For best results, place the RFI filter network as close as possible to the amplifier. Layout is critical to ensure that RF signals are not picked up on the traces after the filter. If RF interference is too strong to be filtered sufficiently, shielding is recommended.

The resistors used for the RFI filter can be the same as those used for input protection.

### CALCULATING THE NOISE OF THE INPUT STAGE
<!-- page: 25 -->

The total noise of the amplifier front end depends on much more than the 3.2 nV/√Hz specification of this data sheet. The three main contributors to noise are: the source resistance, the voltage noise of the instrumentation amplifier, and the current noise of the instrumentation amplifier.

In the following calculations, noise is referred to the input (RTI). In other words, all sources of noise are calculated as if the source appeared at the amplifier input. To calculate the noise referred to the amplifier output (RTO), multiply the RTI noise by the gain of the instru-mentation amplifier.

### Source Resistance Noise
<!-- page: 25 -->

Any sensor connected to the [AD8421](http://www.analog.com/AD8421) has some output resistance. There may also be resistance placed in series with inputs for protection from either overvoltage or radio frequency interference. This combined resistance is labeled R1 and R2 in Figure 70. Any resistor, no matter how well made, has an intrinsic level of noise. This noise is proportional to the square root of the resistor value. At room temperature, the value is approximately equal to 4 nV/√Hz × $\sqrt{\text{resistor value in k}\Omega}$.

![Figure 70. Source Resistance from Sensor and Protection Resistors](ad8421/figures/ad8421-f071.png)

*Figure 70. Source Resistance from Sensor and Protection Resistors*

For example, assume that the combined sensor and protection resistance is 4 kΩ on the positive input and 1 kΩ on the negative input. Then the total noise from the input resistance is

![Equation as printed (p. 25)](ad8421/figures/ad8421-eq07.png)

$$\sqrt{\left( 4 \times \sqrt{4} \right)^{2} + \left( 4 \times \sqrt{1} \right)^{2}} = \sqrt{64 + 16} = 8.9 \, nV / \sqrt{Hz}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

### Voltage Noise of the Instrumentation Amplifier
<!-- pages: 26-27 -->

The voltage noise of the instrumentation amplifier is calculated using three parameters: the device output noise, the input noise, and the RG resistor noise. It is calculated as follows:

![Equation as printed (p. 26)](ad8421/figures/ad8421-eq08.png)

$$TotalVoltageNoise = \sqrt{\left(\frac{\mathrm{OutputNoise}}{G}\right)^2 + \left(\mathrm{InputNoise}\right)^2 + \left(\mathrm{Noise\ of\ }R_G\mathrm{\ Resistor}\right)^2}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

*[Equation not captured in extraction — see Additional Figures, p. 25.]*

For example, for a gain of 100, the gain resistor is 100 Ω. Therefore, the voltage noise of the in-amp is

![Equation as printed (p. 26)](ad8421/figures/ad8421-eq10.png)

$$\sqrt{\left( 60 / 100 \right)^{2} + 3.2^{2} + \left( 4 \times \sqrt{0.1} \right)^{2}} \, = 3.5 \, nV / \sqrt{Hz}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

### Current Noise of the Instrumentation Amplifier
<!-- page: 26 -->

Current noise is converted to a voltage by the source resistance. The effect of current noise can be calculated by multiplying the specified current noise of the in-amp by the value of the source resistance.

For example, if the R1 source resistance in Figure 70 is 4 kΩ, and the R2 source resistance is 1 kΩ, the total effect from the current noise is calculated as follows:

![Equation as printed (p. 26)](ad8421/figures/ad8421-eq11.png)

$$\sqrt{\left( 4 \times 0.2 \right)^{2} + \left( 1 \times 0.2 \right)^{2}} \, = 0.8 \, nV / \sqrt{Hz}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

### Total Noise Density Calculation
<!-- page: 26 -->

To determine the total noise of the in-amp, referred to input, combine the source resistance noise, voltage noise, and current noise contribution by the sum of squares method.

For example, if the R1 source resistance in Figure 70 is 4 kΩ, the R2 source resistance is 1 kΩ, and the gain of the in-amp is 100, the total noise, referred to input, is

![Equation as printed (p. 26)](ad8421/figures/ad8421-eq09.png)

$$\sqrt{8.9^2 + 3.5^2 + 0.8^2} = 9.6\,\mathrm{nV}/\sqrt{\mathrm{Hz}}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

### APPLICATIONS INFORMATION 
### DIFFERENTIAL OUTPUT CONFIGURATION
<!-- pages: 27-28 -->

Figure 71 shows an example of how to configure the [AD8421](http://www.analog.com/AD8421) for differential output.

![Figure 71. Differential Output Configuration with Op Amp](ad8421/figures/ad8421-f072.png)

*Figure 71. Differential Output Configuration with Op Amp*

The differential output voltage is set by the following equation:

![Equation as printed (p. 27)](ad8421/figures/ad8421-eq13.png)

$$V_{DIFF\_OUT} = V_{+OUT} - V_{-OUT} = \boldsymbol{Gain} \times (V_{+IN} - V_{-IN})$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

The common-mode output is set by the following equation:

![Equation as printed (p. 27)](ad8421/figures/ad8421-eq14.png)

$$V_{CM_{-} OUT} = ( V_{+ OUT} + V_{-OUT} ) / 2 = V_{BIAS}$$

*LaTeX transcription of the equation above, checked against the symbols printed on the page.*

The advantage of this circuit is that the dc differential accuracy depends on the [AD8421](http://www.analog.com/AD8421), not on the op amp or the resistors. In addition, this circuit takes advantage of the precise control that the [AD8421](http://www.analog.com/AD8421) has of its output voltage relative to the reference voltage.

Although the dc performance and resistor matching of the op amp affect the dc common-mode output accuracy, such errors are likely to be rejected by the next device in the signal chain and, therefore, typically have little effect on overall system accuracy.

Because this circuit is susceptible to instability, a capacitor is included to limit the effective op amp bandwidth. This capacitor can be omitted if the amplifier pairing is stable.

The open-loop gain and phase of any amplifier may vary with process variation and temperature. Additional phase lag can be introduced by resistive or capacitive loading. To guarantee stability, the value of the capacitor in Figure 71 should be determined with a sample of circuits by evaluating the small signal pulse response of the circuit with load at the extremes of the output dynamic range.

The ambient temperature should also be varied over the expected range to evaluate its effect on stability. The voltage at +OUT may still have some overshoot after the circuit is tuned because the [AD8421](http://www.analog.com/AD8421) output amplifier responds faster than the op amp. A 12 pF capacitor is a good starting point.

For best large signal ac performance, use an op amp with a high slew rate to match the [AD8421](http://www.analog.com/AD8421) performance of 35 V/µs. High bandwidth is not essential because the system bandwidth is limited by the RC feedback. Some good choices for op amps are the [AD8610](http://www.analog.com/AD8610), [ADA4627-1](http://www.analog.com/ADA4627-1), [AD8510](http://www.analog.com/ad8510), and the [ADA4898-1](http://www.analog.com/ada4898-1).

### DRIVING AN ADC
<!-- pages: 28-29 -->

The Class AB output stage, low noise and distortion, and high bandwidth and slew rate make the [AD8421](http://www.analog.com/AD8421) a good choice for driving an ADC in a data acquisition system that requires front-end gain, high CMRR, and dc precision. Figure 72 shows the [AD8421](http://www.analog.com/AD8421), in a gain-of-10 configuration, driving the [AD7685](http://www.analog.com/AD7685), a 16-bit, 250 kSPS pseudodifferential SAR ADC. The RC low-pass filter that is shown between the [AD8421](http://www.analog.com/AD8421) and the [AD7685](http://www.analog.com/AD7685) has several purposes. It isolates the amplifier output from excessive loading from the dynamic ADC inputs, reduces the noise bandwidth of the amplifier, and provides overload protection for the [AD7685](http://www.analog.com/AD7685) analog inputs. The filter cutoff can be determined empirically. To achieve the best ac performance, keep the impedance magnitude greater than 1 kΩ at the maximum input signal frequency, and set the filter cutoff to settle to ½ LSB in one sampling period for a full-scale step. For additional considerations, refer to the data sheet of the ADC in use.

In a gain-of-10 configuration, the [AD8421](http://www.analog.com/AD8421) has approximately 8 nV/√Hz voltage noise RTI (See the Calculating the Noise of the Input Stage section.) The front-end gain makes the system ten times more sensitive to input signals, with only a 7.5 dB reduction of SNR. The high current output and load regulation of the [ADR435](http://www.analog.com/ADR435) allow the [AD7685](http://www.analog.com/AD7685) to be powered directly from the reference without the need to provide another analog supply rail. The reference pin buffer may be any low power, unity-gain stable, dc precision op amp with less than approximately 25 nV/√Hz of wideband noise, such as the [OP1177](http://www.analog.com/op1177). Not all proper decoupling is shown in Figure 72. Take care to follow decoupling guidelines for both amplifiers and the [ADR435](http://www.analog.com/ADR435).

![Figure 72. AD8421 Driving 16-Bit AD7685](ad8421/figures/ad8421-f073.png)

*Figure 72. [AD8421](http://www.analog.com/AD8421) Driving 16-Bit [AD7685](https://www.analog.com/AD7685?doc=AD8421.pdf)*

![Figure 73. Typical Spectrum of the AD8421 (G = 10) Driving the AD7685](ad8421/figures/ad8421-f074.png)

*Figure 73. Typical Spectrum of the [AD8421](http://www.analog.com/AD8421) (G = 10) Driving the [AD7685](http://www.analog.com/AD7685)*

Digitized data: [typical-spectrum-of-the-ad8421-g-10-driving-the-ad7685.csv](ad8421/curves/typical-spectrum-of-the-ad8421-g-10-driving-the-ad7685.csv) (x: kHz; y: dB OF FULL SCALE) — values read off the printed plot by the digitizer, not published data.

### OUTLINE DIMENSIONS
<!-- pages: 29-30 -->

PKG-004263

Dimensions shown in millimeters

![Figure 74. 8-Lead Standard Small Outline Package (SOIC_N) Narrow Body](ad8421/figures/ad8421-f075-01.png)

*Figure 74. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body*

![Figure 75. 8-Lead Mini Small Outline Package (MSOP)](ad8421/figures/ad8421-f075-02.png)

*Figure 75. 8-Lead Mini Small Outline Package [MSOP]*

![other (p. 29)](ad8421/figures/ad8421-f075-03.png)

*Figure 76. 8-Lead Lead Frame Chip Scale Package [LFCSP] 3 mm × 3 mm Body and 0.75 mm Package Height*

### ORDERING GUIDE
<!-- page: 30 -->

**Ordering Guide** ([table-07-p30-data.csv](ad8421/tables/table-07-p30-data.csv), p. 30)

| Model $[^{1}]$ | Temperature Range | Package Description | Package Option | Branding |
|---|---|---|---|---|
| AD8421ARZ | −40°C to +85°C | 8-Lead SOIC_N, standard grade | R-8 |  |
| AD8421ARZ-R7 | −40°C to +85°C | 8-Lead SOIC_N, standard grade, 7” Tape and Reel, | R-8 |  |
| AD8421ARZ-RL | −40°C to +85°C | 8-Lead SOIC_N, standard grade, 13” Tape and Reel | R-8 |  |
| AD8421BRZ | −40°C to +85°C | 8-Lead SOIC_N, high performance grade | R-8 |  |
| AD8421BRZ-R7 | −40°C to +85°C | 8-Lead SOIC_N, high performance grade, 7” Tape and Reel | R-8 |  |
| AD8421BRZ-RL | −40°C to +85°C | 8-Lead SOIC_N, high performance grade, 13” Tape and Reel | R-8 |  |
| AD8421ARMZ | −40°C to +85°C | 8-Lead MSOP, standard grade | RM-8 | Y49 |
| AD8421ARMZ-R7 | −40°C to +85°C | 8-Lead MSOP, standard grade, 7” Tape and Reel | RM-8 | Y49 |
| AD8421ARMZ-RL | −40°C to +85°C | 8-Lead MSOP, standard grade, 13” Tape and Reel | RM-8 | Y49 |
| AD8421BRMZ | −40°C to +85°C | 8-Lead MSOP, high performance grade | RM-8 | Y4A |
| AD8421BRMZ-R7 | −40°C to +85°C | 8-Lead MSOP, high performance grade, 7” Tape and Reel | RM-8 | Y4A |
| AD8421BRMZ-RL | −40°C to +85°C | 8-Lead MSOP, high performance grade, 13” Tape and Reel | RM-8 | Y4A |
| AD8421ACPZ-RL | −40°C to +125°C | 8-Lead Lead Frame Chip Scale Package [LFCSP], Standard Grade, 13” Tape and Reel | CP-8-19 | A4H |
| AD8421ACPZ-R7 | −40°C to +125°C | 8-Lead Lead Frame Chip Scale Package [LFCSP], Standard Grade, 7” Tape and Reel | CP-8-19 | A4H |

$[^{1}]$: Z = RoHS Compliant Part.

NOTES