---
type: Analog Component
title: "AD5791 — 1 ppm, 20-Bit, ±1 LSB INL, Voltage Output DAC"
description: "1 ppm, 20-Bit, ±1 LSB INL, Voltage Output DAC"
resource: "https://www.analog.com/en/products/ad5791.html"
tags: ["datasheet", "adi"]
status: draft
sources:
  - id: "datasheet"
    resource: "https://www.analog.com/media/en/technical-documentation/data-sheets/ad5791.pdf"
    title: "AD5791 data sheet"
    author: "team:analog-devices"
    last_modified: "4/18"
tables:
  - file: "ad5791/tables/table-00-p1-data.csv"
    title: "Table 1. Related Device"
    page: 1
  - file: "ad5791/tables/table-01-p3-spec.csv"
    title: "Table 2. (Specifications)"
    page: 3
  - file: "ad5791/tables/table-02-p5-spec.csv"
    title: "Table 3. (Timing Characteristics)"
    page: 5
  - file: "ad5791/tables/table-03-p7-abs_max.csv"
    title: "Table 4. (Absolute Maximum Ratings)"
    page: 7
  - file: "ad5791/tables/table-04-p8-pin.csv"
    title: "Table 5. Pin Function Descriptions"
    page: 8
  - file: "ad5791/tables/table-05-p17-data.csv"
    title: "Ordering Guide"
    page: 17
figures:
  - file: "ad5791/figures/ad5791-f002-01.png"
    caption: "Figure 2. Write Mode Timing Diagram"
    type: "timing_diagram"
    page: 6
  - file: "ad5791/figures/ad5791-f002-02.png"
    caption: "Figure 3. Readback Mode Timing Diagram"
    type: "timing_diagram"
    page: 6
  - file: "ad5791/figures/ad5791-eqx01.png"
    caption: "Equation as printed (p. 9)"
    type: equation
    page: 9
  - file: "ad5791/figures/ad5791-f001.png"
    caption: ""
    type: "block_diagram"
    page: 1
  - file: "ad5791/figures/ad5791-f004.png"
    caption: "Figure 4. Pin Configuration"
    type: "pinout"
    page: 8
  - file: "ad5791/figures/ad5791-f005.png"
    caption: "Figure 5. Integral Nonlinearity Error vs. DAC Code, ±10 V Span"
    type: "characteristic_curve"
    page: 9
  - file: "ad5791/figures/ad5791-f006.png"
    caption: "Figure 6. Integral Nonlinearity Error vs. DAC Code, +10 V Span"
    type: "characteristic_curve"
    page: 9
  - file: "ad5791/figures/ad5791-f007.png"
    caption: "Figure 7. Integral Nonlinearity Error vs. DAC Code, +5 V Span"
    type: "characteristic_curve"
    page: 9
  - file: "ad5791/figures/ad5791-f008.png"
    caption: "Figure 8. Integral Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode"
    type: "characteristic_curve"
    page: 9
  - file: "ad5791/figures/ad5791-f009.png"
    caption: "Figure 9. Differential Nonlinearity Error vs. DAC Code, ±10 V Span"
    type: "characteristic_curve"
    page: 9
  - file: "ad5791/figures/ad5791-f010.png"
    caption: "Figure 10. Differential Nonlinearity Error vs. DAC Code, +10 V Span"
    type: "characteristic_curve"
    page: 9
  - file: "ad5791/figures/ad5791-f011.png"
    caption: "Figure 11. Differential Nonlinearity Error vs. DAC Code, +5 V Span"
    type: "characteristic_curve"
    page: 10
  - file: "ad5791/figures/ad5791-f012.png"
    caption: "Figure 12. Differential Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode"
    type: "characteristic_curve"
    page: 10
  - file: "ad5791/figures/ad5791-f013.png"
    caption: "Figure 13. Integral Nonlinearity Error vs. Temperature"
    type: "characteristic_curve"
    page: 10
  - file: "ad5791/figures/ad5791-f014.png"
    caption: "Figure 14. Differential Nonlinearity Error vs. Temperature"
    type: "characteristic_curve"
    page: 10
  - file: "ad5791/figures/ad5791-f015.png"
    caption: "Figure 15. Integral Nonlinearity Error vs. Supply Voltage, ±10 V Span"
    type: "characteristic_curve"
    page: 10
  - file: "ad5791/figures/ad5791-f016.png"
    caption: "Figure 16. Integral Nonlinearity Error vs. Supply Voltage, +5 V Span"
    type: "characteristic_curve"
    page: 10
  - file: "ad5791/figures/ad5791-f017.png"
    caption: "Figure 17. Differential Nonlinearity Error vs. Supply Voltage, ±10 V Span"
    type: "characteristic_curve"
    page: 11
  - file: "ad5791/figures/ad5791-f018.png"
    caption: "Figure 18. Differential Nonlinearity Error vs. Supply Voltage, +5 V Span"
    type: "characteristic_curve"
    page: 11
  - file: "ad5791/figures/ad5791-f019.png"
    caption: "Figure 19. Zero-Scale Error vs. Supply Voltage, ±10 V Span"
    type: "characteristic_curve"
    page: 11
  - file: "ad5791/figures/ad5791-f020.png"
    caption: "Figure 20. Zero-Scale Error vs. Supply Voltage, +5 V Span"
    type: "characteristic_curve"
    page: 11
  - file: "ad5791/figures/ad5791-f021.png"
    caption: "Figure 21. Midscale Error vs. Supply Voltage, ±10 V Span"
    type: "characteristic_curve"
    page: 11
  - file: "ad5791/figures/ad5791-f022.png"
    caption: "Figure 22. Midscale Error vs. Supply Voltage, +5 V Span"
    type: "characteristic_curve"
    page: 11
  - file: "ad5791/figures/ad5791-f023.png"
    caption: "Figure 23. Full-Scale Error vs. Supply Voltage, ±10 V Span"
    type: "characteristic_curve"
    page: 12
  - file: "ad5791/figures/ad5791-f024.png"
    caption: "Figure 24. Full-Scale Error vs. Supply Voltage, +5 V Span"
    type: "characteristic_curve"
    page: 12
  - file: "ad5791/figures/ad5791-f025.png"
    caption: "Figure 25. Gain Error vs. Supply Voltage, ±10 V Span"
    type: "characteristic_curve"
    page: 12
  - file: "ad5791/figures/ad5791-f026.png"
    caption: "Figure 26. Gain Error vs. Supply Voltage, +5 V Span"
    type: "characteristic_curve"
    page: 12
  - file: "ad5791/figures/ad5791-f027.png"
    caption: "Figure 27. Integral Nonlinearity Error vs. Reference Voltage"
    type: "characteristic_curve"
    page: 12
  - file: "ad5791/figures/ad5791-f028.png"
    caption: "Figure 28. Differential Nonlinearity Error vs. Reference Voltage"
    type: "characteristic_curve"
    page: 12
  - file: "ad5791/figures/ad5791-f029.png"
    caption: "Figure 29. Zero-Scale Error vs. Reference Voltage"
    type: "characteristic_curve"
    page: 13
  - file: "ad5791/figures/ad5791-f030.png"
    caption: "Figure 30. Midscale Error vs. Reference Voltage"
    type: "characteristic_curve"
    page: 13
  - file: "ad5791/figures/ad5791-f031.png"
    caption: "Figure 31. Full-Scale Error vs. Reference Voltage"
    type: "characteristic_curve"
    page: 13
  - file: "ad5791/figures/ad5791-f032.png"
    caption: "Figure 32. Gain Error vs. Reference Voltage"
    type: "characteristic_curve"
    page: 13
  - file: "ad5791/figures/ad5791-f033.png"
    caption: "Figure 33. Full-Scale Error vs. Temperature"
    type: "characteristic_curve"
    page: 13
  - file: "ad5791/figures/ad5791-f034.png"
    caption: "Figure 34. Midscale Error vs. Temperature"
    type: "characteristic_curve"
    page: 13
  - file: "ad5791/figures/ad5791-f035.png"
    caption: "Figure 35. Zero-Scale Error vs. Temperature"
    type: "characteristic_curve"
    page: 14
  - file: "ad5791/figures/ad5791-f036.png"
    caption: "Figure 36. Gain Error vs. Temperature"
    type: "characteristic_curve"
    page: 14
  - file: "ad5791/figures/ad5791-f037.png"
    caption: "Figure 37. IOI_{CC} vs. Logic Input Voltage"
    type: "characteristic_curve"
    page: 14
  - file: "ad5791/figures/ad5791-f038.png"
    caption: "Figure 38. Power Supply Currents vs. Power Supply Voltages"
    type: "characteristic_curve"
    page: 14
  - file: "ad5791/figures/ad5791-f039.png"
    caption: "Figure 39. Rising Full-Scale Voltage Step"
    type: "scope_capture"
    page: 14
  - file: "ad5791/figures/ad5791-f040.png"
    caption: "Figure 40. Falling Full-Scale Voltage Step"
    type: "scope_capture"
    page: 14
  - file: "ad5791/figures/ad5791-f041.png"
    caption: "Figure 41. 500 Code Step Settling Time"
    type: "characteristic_curve"
    page: 15
  - file: "ad5791/figures/ad5791-f042.png"
    caption: "Figure 42. 6 MSB Segment Glitch Energy for ±10 V V_{REF}"
    type: "characteristic_curve"
    page: 15
  - file: "ad5791/figures/ad5791-f043.png"
    caption: "Figure 43. 6 MSB Segment Glitch Energy for +10 V V_{REF}"
    type: "characteristic_curve"
    page: 15
  - file: "ad5791/figures/ad5791-f044.png"
    caption: "Figure 44. 6 MSB Segment Glitch Energy for +5 V V_{REF}"
    type: "characteristic_curve"
    page: 15
  - file: "ad5791/figures/ad5791-f045.png"
    caption: "Figure 45. Midscale Peak-to-Peak Glitch for ±10 V"
    type: "characteristic_curve"
    page: 15
  - file: "ad5791/figures/ad5791-f046.png"
    caption: "Figure 46. Voltage Output Noise, 0.1 Hz to 10 Hz Bandwidth"
    type: "characteristic_curve"
    page: 15
  - file: "ad5791/figures/ad5791-f047.png"
    caption: "Figure 47. Noise Spectral Density vs. Frequency"
    type: "characteristic_curve"
    page: 16
  - file: "ad5791/figures/ad5791-f048.png"
    caption: "Figure 48. Glitch Impulse on Removal of Output Clamp"
    type: "characteristic_curve"
    page: 16
  - file: "ad5791/figures/ad5791-f049.png"
    caption: "Figure 49. 20-Lead Thin Shrink Small Outline Package [TSSOP] (RU-20) Dimensions shown in millimeters"
    type: "layout_drawing"
    page: 17
curves:
  - file: "ad5791/curves/500-code-step-settling-time.csv"
    caption: "Figure 41. 500 Code Step Settling Time"
    figure: "ad5791/figures/ad5791-f041.png"
    page: 15
    x_unit: "µs"
    y_unit: "mV"
    conditions: "±10V V_{REF}, OUTPUT GAIN OF 1, BIAS COMPENSATION MODE, 20pF COMPENSATION CAPACITOR, RC LOW-PASS FILTER"
  - file: "ad5791/curves/6-msb-segment-glitch-energy-for-10-v-vref.csv"
    caption: "Figure 43. 6 MSB Segment Glitch Energy for +10 V V_{REF}"
    figure: "ad5791/figures/ad5791-f043.png"
    page: 15
  - file: "ad5791/curves/6-msb-segment-glitch-energy-for-5-v-vref.csv"
    caption: "Figure 44. 6 MSB Segment Glitch Energy for +5 V V_{REF}"
    figure: "ad5791/figures/ad5791-f044.png"
    page: 15
    x_unit: "CODE"
    y_unit: "nV-sec"
    conditions: "5V V_{REF}, OUTPUT GAIN OF 1, BIAS COMPENSATION MODE, 20pF COMPENSATION CAPACITOR, RC LOW-PASS FILTER"
  - file: "ad5791/curves/differential-nonlinearity-error-vs-dac-code-10-v-span.csv"
    caption: "Figure 10. Differential Nonlinearity Error vs. DAC Code, +10 V Span"
    figure: "ad5791/figures/ad5791-f010.png"
    page: 9
    x_unit: "DAC CODE"
    y_unit: "LSB"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{REFP} = +10V, V_{REFN} = 0V, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/differential-nonlinearity-error-vs-dac-code-10-v-span-2-gain-mode.csv"
    caption: "Figure 12. Differential Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode"
    figure: "ad5791/figures/ad5791-f012.png"
    page: 10
    x_unit: "DAC CODE"
    y_unit: "LSB"
    conditions: "V_{REFP} = +10V, V_{REFN} = 0V, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/differential-nonlinearity-error-vs-dac-code-5-v-span.csv"
    caption: "Figure 11. Differential Nonlinearity Error vs. DAC Code, +5 V Span"
    figure: "ad5791/figures/ad5791-f011.png"
    page: 10
    x_unit: "DAC CODE"
    y_unit: "LSB"
    conditions: "V_{REFP} = +5V, V_{REFN} = 0V, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/differential-nonlinearity-error-vs-reference-voltage.csv"
    caption: "Figure 28. Differential Nonlinearity Error vs. Reference Voltage"
    figure: "ad5791/figures/ad5791-f028.png"
    page: 12
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/differential-nonlinearity-error-vs-supply-voltage-10-v-span.csv"
    caption: "Figure 17. Differential Nonlinearity Error vs. Supply Voltage, ±10 V Span"
    figure: "ad5791/figures/ad5791-f017.png"
    page: 11
  - file: "ad5791/curves/differential-nonlinearity-error-vs-supply-voltage-5-v-span.csv"
    caption: "Figure 18. Differential Nonlinearity Error vs. Supply Voltage, +5 V Span"
    figure: "ad5791/figures/ad5791-f018.png"
    page: 11
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +5V, V_{REFN} = 0V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/differential-nonlinearity-error-vs-temperature.csv"
    caption: "Figure 14. Differential Nonlinearity Error vs. Temperature"
    figure: "ad5791/figures/ad5791-f014.png"
    page: 10
    x_unit: "°C"
    y_unit: "LSB"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/full-scale-error-vs-reference-voltage.csv"
    caption: "Figure 31. Full-Scale Error vs. Reference Voltage"
    figure: "ad5791/figures/ad5791-f031.png"
    page: 13
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = −15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/full-scale-error-vs-supply-voltage-10-v-span.csv"
    caption: "Figure 23. Full-Scale Error vs. Supply Voltage, ±10 V Span"
    figure: "ad5791/figures/ad5791-f023.png"
    page: 12
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +10V, V_{REFN} = −10V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/full-scale-error-vs-supply-voltage-5-v-span.csv"
    caption: "Figure 24. Full-Scale Error vs. Supply Voltage, +5 V Span"
    figure: "ad5791/figures/ad5791-f024.png"
    page: 12
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +5V, V_{REFN} = 0V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/full-scale-error-vs-temperature.csv"
    caption: "Figure 33. Full-Scale Error vs. Temperature"
    figure: "ad5791/figures/ad5791-f033.png"
    page: 13
    x_unit: "°C"
    y_unit: "LSBs"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/gain-error-vs-reference-voltage.csv"
    caption: "Figure 32. Gain Error vs. Reference Voltage"
    figure: "ad5791/figures/ad5791-f032.png"
    page: 13
    x_unit: "V"
    y_unit: "ppm FSR"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/gain-error-vs-supply-voltage-10-v-span.csv"
    caption: "Figure 25. Gain Error vs. Supply Voltage, ±10 V Span"
    figure: "ad5791/figures/ad5791-f025.png"
    page: 12
    x_unit: "V"
    y_unit: "ppm FSR"
    conditions: "T_{A} = 25°C, V_{REFP} = +10V, V_{REFN} = −10V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/gain-error-vs-supply-voltage-5-v-span.csv"
    caption: "Figure 26. Gain Error vs. Supply Voltage, +5 V Span"
    figure: "ad5791/figures/ad5791-f026.png"
    page: 12
    x_unit: "V"
    y_unit: "ppm FSR"
    conditions: "T_{A} = 25°C, V_{REFP} = +5V, V_{REFN} = 0V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/gain-error-vs-temperature.csv"
    caption: "Figure 36. Gain Error vs. Temperature"
    figure: "ad5791/figures/ad5791-f036.png"
    page: 14
    x_unit: "°C"
    y_unit: "ppm FSR"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/glitch-impulse-on-removal-of-output-clamp.csv"
    caption: "Figure 48. Glitch Impulse on Removal of Output Clamp"
    figure: "ad5791/figures/ad5791-f048.png"
    page: 16
    x_unit: "us"
    y_unit: "mV"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = -15V, V_{REFP} = +10V, V_{REFN} = -10V, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-dac-code-10-v-span.csv"
    caption: "Figure 6. Integral Nonlinearity Error vs. DAC Code, +10 V Span"
    figure: "ad5791/figures/ad5791-f006.png"
    page: 9
    x_unit: "DAC CODE"
    y_unit: "LSB"
    conditions: "V_{REFP} = +10V, V_{REFN} = 0V, V_{DD} = +15V, V_{SS} = -15V; T_{A} = +125°C, T_{A} = +25°C, T_{A} = -40°C"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-dac-code-10-v-span-2-gain-mode.csv"
    caption: "Figure 8. Integral Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode"
    figure: "ad5791/figures/ad5791-f008.png"
    page: 9
    x_unit: "DAC CODE"
    y_unit: "LSB"
    conditions: "V_{REFP} = +10V, V_{REFN} = 0V, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-dac-code-5-v-span.csv"
    caption: "Figure 7. Integral Nonlinearity Error vs. DAC Code, +5 V Span"
    figure: "ad5791/figures/ad5791-f007.png"
    page: 9
    x_unit: "DAC CODE"
    y_unit: "LSB"
    conditions: "V_{REFP} = +5V, V_{REFN} = 0V, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-reference-voltage.csv"
    caption: "Figure 27. Integral Nonlinearity Error vs. Reference Voltage"
    figure: "ad5791/figures/ad5791-f027.png"
    page: 12
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-supply-voltage-10-v-span.csv"
    caption: "Figure 15. Integral Nonlinearity Error vs. Supply Voltage, ±10 V Span"
    figure: "ad5791/figures/ad5791-f015.png"
    page: 10
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +10V, V_{REFN} = −10V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-supply-voltage-5-v-span.csv"
    caption: "Figure 16. Integral Nonlinearity Error vs. Supply Voltage, +5 V Span"
    figure: "ad5791/figures/ad5791-f016.png"
    page: 10
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +5V, V_{REFN} = 0V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/integral-nonlinearity-error-vs-temperature.csv"
    caption: "Figure 13. Integral Nonlinearity Error vs. Temperature"
    figure: "ad5791/figures/ad5791-f013.png"
    page: 10
    x_unit: "°C"
    y_unit: "LSB"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/ioicc-vs-logic-input-voltage.csv"
    caption: "Figure 37. IOI_{CC} vs. Logic Input Voltage"
    figure: "ad5791/figures/ad5791-f037.png"
    page: 14
    x_unit: "V"
    y_unit: "µA"
    conditions: "T_{A} = 25°C"
  - file: "ad5791/curves/midscale-error-vs-reference-voltage.csv"
    caption: "Figure 30. Midscale Error vs. Reference Voltage"
    figure: "ad5791/figures/ad5791-f030.png"
    page: 13
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/midscale-error-vs-supply-voltage-10-v-span.csv"
    caption: "Figure 21. Midscale Error vs. Supply Voltage, ±10 V Span"
    figure: "ad5791/figures/ad5791-f021.png"
    page: 11
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +10V, V_{REFN} = -10V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/midscale-error-vs-supply-voltage-5-v-span.csv"
    caption: "Figure 22. Midscale Error vs. Supply Voltage, +5 V Span"
    figure: "ad5791/figures/ad5791-f022.png"
    page: 11
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +5V, V_{REFN} = 0V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/midscale-error-vs-temperature.csv"
    caption: "Figure 34. Midscale Error vs. Temperature"
    figure: "ad5791/figures/ad5791-f034.png"
    page: 13
    x_unit: "°C"
    y_unit: "LSBs"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{DD} = +15V, V_{SS} = -15V"
  - file: "ad5791/curves/midscale-peak-to-peak-glitch-for-10-v.csv"
    caption: "Figure 45. Midscale Peak-to-Peak Glitch for ±10 V"
    figure: "ad5791/figures/ad5791-f045.png"
    page: 15
    x_unit: "µs"
    y_unit: "mV"
    conditions: "±10V V_{REF}, OUTPUT GAIN OF 1, BIAS COMPENSATION MODE, 20pF COMPENSATION CAPACITOR, RC LOW-PASS FILTER"
  - file: "ad5791/curves/noise-spectral-density-vs-frequency.csv"
    caption: "Figure 47. Noise Spectral Density vs. Frequency"
    figure: "ad5791/figures/ad5791-f047.png"
    page: 16
    x_unit: "Hz"
    y_unit: "nV/√Hz"
    conditions: "V_{DD} = +15V, V_{SS} = -15V, V_{REFP} = +10V, V_{REFN} = -10V, CODE = MIDSCALE"
  - file: "ad5791/curves/power-supply-currents-vs-power-supply-voltages.csv"
    caption: "Figure 38. Power Supply Currents vs. Power Supply Voltages"
    figure: "ad5791/figures/ad5791-f038.png"
    page: 14
    x_unit: "V"
    y_unit: "mA"
    conditions: "T_{A} = 25°C"
  - file: "ad5791/curves/voltage-output-noise-0-1-hz-to-10-hz-bandwidth.csv"
    caption: "Figure 46. Voltage Output Noise, 0.1 Hz to 10 Hz Bandwidth"
    figure: "ad5791/figures/ad5791-f046.png"
    page: 15
    x_unit: "Seconds"
    y_unit: "nV"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = −15V, V_{REFP} = +10V, V_{REFN} = −10V, MIDSCALE CODE LOADED, OUTPUT UNBUFFERED, AD8676 REFERENCE BUFFERS"
  - file: "ad5791/curves/zero-scale-error-vs-reference-voltage.csv"
    caption: "Figure 29. Zero-Scale Error vs. Reference Voltage"
    figure: "ad5791/figures/ad5791-f029.png"
    page: 13
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{DD} = +15V, V_{SS} = -15V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/zero-scale-error-vs-supply-voltage-10-v-span.csv"
    caption: "Figure 19. Zero-Scale Error vs. Supply Voltage, ±10 V Span"
    figure: "ad5791/figures/ad5791-f019.png"
    page: 11
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +10V, V_{REFN} = -10V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/zero-scale-error-vs-supply-voltage-5-v-span.csv"
    caption: "Figure 20. Zero-Scale Error vs. Supply Voltage, +5 V Span"
    figure: "ad5791/figures/ad5791-f020.png"
    page: 11
    x_unit: "V"
    y_unit: "LSB"
    conditions: "T_{A} = 25°C, V_{REFP} = +5V, V_{REFN} = 0V, AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER"
  - file: "ad5791/curves/zero-scale-error-vs-temperature.csv"
    caption: "Figure 35. Zero-Scale Error vs. Temperature"
    figure: "ad5791/figures/ad5791-f035.png"
    page: 14
    x_unit: "°C"
    y_unit: "LSBs"
    conditions: "AD8676 REFERENCE BUFFERS, AD8675 OUTPUT BUFFER, V_{DD} = +15V, V_{SS} = -15V"
agentforge:
  part_number: "AD5791"
  datasheet_revision: "B"
  repairs: 1
  reading_order: "structure-tree"
---

# AD5791-EP — 1 ppm, 20-Bit, ±1 LSB INL, Voltage Output DAC

*Datasheet: [AD5791 data sheet (PDF)](https://www.analog.com/media/en/technical-documentation/data-sheets/ad5791.pdf)*

### Enhanced Product

### FEATURES

- 1 ppm resolution
- 1 ppm INL
- 7.5 nV/√Hz noise spectral density
- 0.19 LSB long-term linearity stability
- <0.05 ppm/°C temperature drift
- 1 µs settling time
- 1.4 nV-sec glitch impulse
- 20-lead TSSOP package
- Wide power supply range up to ±16.5 V
- 35 MHz Schmitt triggered digital interface
- 1.8 V compatible digital interface

### ENHANCED PRODUCT FEATURES

- Supports defense and aerospace applications (AQEC standard)
- Military temperature range (-55°C to +125°C)
- Controlled manufacturing baseline 
- One assembly/test site
- One fabrication site
- Product change notification
- Qualification data available on request

### APPLICATIONS

- Medical instrumentation
- Test and measurement
- Industrial control
- High end scientific and aerospace instrumentation

### FUNCTIONAL BLOCK DIAGRAM

![block diagram (p. 1)](ad5791/figures/ad5791-f001.png)

### COMPANION PRODUCTS

- Ultra precision op amps: AD8675, AD8676
- High voltage op amp: ADA4898-1
- Additional companion products on the AD5791 product page

### Table 1. Related Device

**Table 1. Related Device** ([table-00-p1-data.csv](ad5791/tables/table-00-p1-data.csv), p. 1)

| Part No. | Description |
|---|---|
| AD5781 | 18-bit, 0.5 LSB INL, voltage output DAC |

### GENERAL DESCRIPTION

The AD5791-EP[^1] is a single 20-bit, unbuffered voltage-output digital-to-analog converter (DAC) that operates from a bipolar supply of up to 33 V . The AD5791 accepts a positive reference input in the range 5 V to V_{DD} - 2.5 V and a negative reference input in the range V_{SS} + 2.5 V to 0 V . The AD5791-EP offers a relative accuracy specification of ±1 LSB max, and operation is guaranteed monotonic with a ±1 LSB differential nonlinearity (DNL) maximum specification.

The part uses a versatile 3-wire serial interface that operates at clock rates up to 35 MHz and that is compatible with standard serial peripheral interface (SPI), QSPI™, MICROWIRE™, and DSP interface standards. The part incorporates a power-on reset circuit that ensures the DAC output powers up to 0 V in a known output impedance state and remains in this state until a valid write to the device takes place. The part provides an output clamp feature that places the output in a defined load state.

The AD5791-EP is available in a compact, 20-lead TSSOP package and operates at the extended automotive temperature range of -55°C to +125°C. Additional application and technical information can be found in the AD5791 data sheet.

### PRODUCT HIGHLIGHTS

1. 1 ppm Accuracy.
2. Wide Power Supply Range up to ±16.5 V .
3. Operating Temperature Range: -55°C to +125°C.
4. Low 7.5 nV/√Hz Noise Spectral Density.
5. Low 0.05 ppm/°C Temperature Drift.

- **Note 1:**  Protected by U.S. Patents No. 7,884,747 and 8,089,380. Other patents pending.

### AD5791-EP

### TABLE OF CONTENTS

- Features...1
- Enhanced Product Features...1
- Applications...1
- Functional Block Diagram...1
- Companion Products...1
- General Description...1
- Product Highlights...1
- Revision History...2
- Specifications...3
  - Timing Characteristics...5
- Absolute Maximum Ratings...7
  - ESD Caution...7
- Pin Configuration and Function Descriptions...8
- Typical Performance Characteristics...9
- Outline Dimensions...17
  - Ordering Guide...17

### REVISION HISTORY

### 3/2018-Rev. A to Rev. B

- Changes to Features Section and Enhanced Product Features Section...1
- Changes to Ordering Guide...17

### 7/2013-Rev. 0 to Rev. A

- Changes to t_{1} Test Conditions/Comments and Endnote 2...5
- Deleted Figure 4...7

### 2/2012-Revision 0: Initial Version

### SPECIFICATIONS

V_{DD} = 12.5 V to 16.5 V , V_{SS} = -16.5 V to -12.5 V , V_{REFP} = 10 V , V_{REFN} = -10 V , V_{CC} = 2.7 V to +5.5 V , IOV_{CC} = 1.71 V to 5.5 V , R_{L} = unloaded, C_{L} = unloaded, all specifications T_{MIN} to T_{MAX}, unless otherwise noted.

**Table 2. (Specifications)** ([table-01-p3-spec.csv](ad5791/tables/table-01-p3-spec.csv), p. 3)

| PARAMETER[^1] | CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|
| **STATIC PERFORMANCE[^2]** |  |  |  |  |  |
| Resolution |  | 20 |  |  | Bits |
| Integral Nonlinearity Error (Relative Accuracy) | V_{REFP} = +10 V, V_{REFN} = −10 V, T_{A} = 0°C to 105°C | −1 | ±0.25 | +1 | LSB |
| Integral Nonlinearity Error (Relative Accuracy) | V_{REFP} = +10 V, V_{REFN} = −10 V | −1.5 | ±0.25 | +1.5 | LSB |
| Integral Nonlinearity Error (Relative Accuracy) | V_{REFP} = 10 V, V_{REFN} = 0 V[^3] | −1.5 | ±0.5 | +1.5 | LSB |
| Integral Nonlinearity Error (Relative Accuracy) | V_{REFP} = 5 V, V_{REFN} = 0 V[^3] | −3 | ±1 | +3 | LSB |
| Differential Nonlinearity Error | V_{REFP} = +10 V, V_{REFN} = −10 V | −1 | ±0.5 | +1 | LSB |
| Differential Nonlinearity Error | V_{REFP} = 10 V, V_{REFN} = 0 V | −1.5 | ±0.75 | +1.5 | LSB |
| Differential Nonlinearity Error | V_{REFP} = 5 V, V_{REFN} = 0 V | −2.5 | ±1 | +2.5 | LSB |
| Linearity Error Long-Term Stability[^4] | After 500 hours at T_{A} = 125°C |  | 0.16 |  | LSB |
| Linearity Error Long-Term Stability[^4] | After 1000 hours at T_{A} = 125°C |  | 0.19 |  | LSB |
| Linearity Error Long-Term Stability[^4] | After 1000 hours at T_{A} = 100°C |  | 0.11 |  | LSB |
| Full-Scale Error | V_{REFP} = +10 V, V_{REFN} = −10 V[^3] | −7 | ±0.1 | +7 | LSB |
| Full-Scale Error | V_{REFP} = 10 V, V_{REFN} = 0 V[^3] | −11 | ±0.25 | +11 | LSB |
| Full-Scale Error | V_{REFP} = 5 V, V_{REFN} = 0 V[^3] | −21 | ±0.8 | +21 | LSB |
| Full-Scale Error | V_{REFP} = +10 V, V_{REFN} = −10 V[^3], T_{A} = 0°C to 105°C | −4 | ±0.1 | +4 | LSB |
| Full-Scale Error | V_{REFP} = 10 V, V_{REFN} = 0 V[^3], T_{A} = 0°C to 105°C | −4 | ±0.25 | +4 | LSB |
| Full-Scale Error | V_{REFP} = 5 V, V_{REFN} = 0 V[^3], T_{A} = 0°C to 105°C | −6 | ±0.8 | +6 | LSB |
| Full-Scale Error Temperature Coefficient |  |  | ±0.02 |  | ppm FSR/°C |
| Zero-Scale Error | V_{REFP} = +10 V, V_{REFN} = −10 V[^3] | −7 | ±0.1 | +7 | LSB |
| Zero-Scale Error | V_{REFP} = 10 V, V_{REFN} = 0 V[^3] | −10 | ±0.15 | +10 | LSB |
| Zero-Scale Error | V_{REFP} = 5 V, V_{REFN} = 0 V[^3] | −21 | ±0.75 | +21 | LSB |
| Zero-Scale Error | V_{REFP} = +10 V, V_{REFN} = −10 V[^3], T_{A} = 0°C to 105°C | −4 | ±0.1 | +4 | LSB |
| Zero-Scale Error | V_{REFP} = 10 V, V_{REFN} = 0 V[^3], T_{A} = 0°C to 105°C | −4 | ±0.15 | +4 | LSB |
| Zero-Scale Error | V_{REFP} = 5 V, V_{REFN} = 0 V[^3], T_{A} = 0°C to 105°C | −6 | ±0.75 | +6 | LSB |
| Zero-Scale Error Temperature Coefficient[^3] |  |  | ±0.04 |  | ppm FSR/°C |
| Gain Error | V_{REFP} = +10 V, V_{REFN} = −10 V[^3] | −6 | ±0.3 | +6 | ppm FSR |
| Gain Error | V_{REFP} = 10 V, V_{REFN} = 0 V[^3] | −10 | ±0.4 | +10 | ppm FSR |
| Gain Error | V_{REFP} = 5 V, V_{REFN} = 0 V[^3] | −20 | ±0.4 | +20 | ppm FSR |
| Gain Error | V_{REFP} = +10 V, V_{REFN} = −10 V[^3], T_{A} = 0°C to 105°C | −6 | ±0.3 | +6 | ppm FSR |
| Gain Error | V_{REFP} = 10 V, V_{REFN} = 0 V[^3], T_{A} = 0°C to 105°C | −6 | ±0.4 | +6 | ppm FSR |
| Gain Error | V_{REFP} = 5 V, V_{REFN} = 0 V[^3], T_{A} = 0°C to 105°C | −7 | ±0.4 | +7 | ppm FSR |
| Gain Error Temperature Coefficient[^3] |  |  | ±0.04 |  | ppm FSR/°C |
| R1, R_{FB} Matching |  |  | 0.01 |  | % |
| **OUTPUT CHARACTERISTICS[^3]** |  |  |  |  |  |
| Output Voltage Range |  | V_{REFN} |  | V_{REFP} | V |
| Output Slew Rate |  |  | 50 |  | V/µs |
| Output Voltage Settling Time | 10 V step to 0.02%, using the AD845 buffer in unity-gain mode |  | 1 |  | µs |
| Output Voltage Settling Time | 500 code step to ±1 LSB[^5] |  | 1 |  | µs |
| Output Noise Spectral Density | at 1 kHz, DAC code = midscale |  | 7.5 |  | nV/√Hz |
| Output Noise Spectral Density | at 10 kHz, DAC code = midscale |  | 7.5 |  | nV/√Hz |
| Output Noise Spectral Density | At 100 kHz, DAC code = midscale |  | 7.5 |  | nV/√Hz |
| Output Voltage Noise | DAC code = midscale, 0.1 Hz to 10 Hz bandwidth[^6] |  | 1.1 |  | µV p-p |
| Midscale Glitch Impulse[^7] | V_{REFP} = +10 V, V_{REFN} = −10 V |  | 3.1 |  | nV-sec |
| Midscale Glitch Impulse[^7] | V_{REFP} = 10 V, V_{REFN} = 0 V |  | 1.7 |  | nV-sec |
| Midscale Glitch Impulse[^7] | V_{REFP} = 5 V, V_{REFN} = 0 V |  | 1.4 |  | nV-sec |
| MSB Segment Glitch Impulse[^7] | V_{REFP} = +10 V, V_{REFN} = −10 V, see Figure 42 |  | 9.1 |  | nV-sec |
| MSB Segment Glitch Impulse[^7] | V_{REFP} = 10 V, V_{REFN} = 0 V, see Figure 43 |  | 3.6 |  | nV-sec |
| MSB Segment Glitch Impulse[^7] | V_{REFP} = 5 V, V_{REFN} = 0 V, see Figure 44 |  | 1.9 |  | nV-sec |
| Output Enabled Glitch Impulse | On removal of output ground clamp |  | 45 |  | nV-sec |
| Digital Feedthrough |  |  | 0.4 |  | nV-sec |
| DC Output Impedance (Normal Mode) |  |  | 3.4 |  | kΩ |
| DC Output Impedance (Output Clamped to Ground) |  |  | 6 |  | kΩ |
| Spurious Free Dynamic Range | 1 kHz tone, 10 kHz sample rate |  | 100 |  | dB |
| Total Harmonic Distortion | 1 kHz tone, 10 kHz sample rate |  | 97 |  | dB |
| **REFERENCE INPUTS[^3]** |  |  |  |  |  |
| V_{REFP} Input Range |  | 5 |  | V_{DD} − 2.5 V | V |
| V_{REFN} Input Range |  | V_{SS} + 2.5 V |  | 0 | V |
| DC Input Impedance | V_{REFP}, V_{REFN}, code dependent, typical at midscale code | 5 | 6.6 |  | kΩ |
| Input Capacitance | V_{REFP}, V_{REFN} |  | 15 |  | pF |
| **LOGIC INPUTS[^3]** |  |  |  |  |  |
| Input Current[^8] |  | −1 |  | +1 | µA |
| Input Low Voltage, V_{IL} | IOV_{CC} = 1.71 V to 5.5 V |  |  | 0.3 × IOV_{CC} | V |
| Input High Voltage, V_{IH} | IOV_{CC} = 1.71 V to 5.5 V | 0.7 × IOV_{CC} |  |  | V |
| Pin Capacitance |  |  | 5 |  | pF |
| **LOGIC OUTPUT (SDO)[^3]** |  |  |  |  |  |
| Output Low Voltage, V_{OL} | IOV_{CC} = 1.71 V to 5.5 V, sinking 1 mA |  |  | 0.4 | V |
| Output High Voltage, V_{OH} | IOV_{CC} = 1.71 V to 5.5 V, sourcing 1 mA | IOV_{CC} − 0.5 V |  |  | V |
| High Impedance Leakage Current |  |  |  | ±1 | µA |
| High Impedance Output Capacitance |  |  | 3 |  | pF |
| **POWER REQUIREMENTS** | All digital inputs at DGND or IOV_{CC} |  |  |  |  |
| V_{DD} |  | 7.5 |  | V_{SS} + 33 | V |
| V_{SS} |  | V_{DD} − 33 |  | −2.5 | V |
| V_{CC} |  | 2.7 |  | 5.5 | V |
| IOV_{CC} | IOV_{CC} ≤ V_{CC} | 1.71 |  | 5.5 | V |
| I_{DD} |  |  | 4.2 | 5.2 | mA |
| I_{SS} |  |  | 4 | 4.9 | mA |
| I_{CC} |  |  | 600 | 900 | µA |
| IOI_{CC} | SDO disabled |  | 52 | 140 | µA |
| DC Power Supply Rejection Ratio[^3][^9] | V_{DD} ± 10%, V_{SS} = 15 V |  | ±0.6 |  | µV/V |
| DC Power Supply Rejection Ratio[^3][^9] | V_{SS} ± 10%, V_{DD} = 15 V |  | ±0.6 |  | µV/V |
| AC Power Supply Rejection Ratio[^3] | V_{DD} ± 200 mV, 50 Hz/60 Hz, V_{SS} = −15 V |  | 95 |  | dB |
| AC Power Supply Rejection Ratio[^3] | ΔV_{SS} ± 200 mV, 50 Hz/60 Hz, V_{DD} = 15 V |  | 95 |  | dB |

- **Note 1:** Temperature range: −55°C to +125°C, typical at +25°C and V_{DD} = +15 V, V_{SS} = −15 V, V_{REFP} = +10 V, V_{REFN} = −10 V.
- **Note 2:** Performance characterized with AD8676BRZ voltage reference buffers and AD8675ARZ output buffer.
- **Note 3:** Guaranteed by design and characterization; not production tested.
- **Note 4:** Linearity error refers to both INL error and DNL error, either parameter can be expected to drift by the amount specified after the length of time specified.
- **Note 5:** AD5791-EP configured in ×2 gain mode, 25 pF compensation capacitor on AD797.
- **Note 6:** Includes noise contribution from AD8676BRZ voltage reference buffers.
- **Note 7:** The AD5791-EP is configured in bias compensation mode with a low-pass RC filter on the output. R = 300 Ω, C = 143 pF (total capacitance seen by the output buffer, lead capacitance, and so forth).
- **Note 8:** Current flowing in an individual logic pin.
- **Note 9:** Includes PSRR of AD8676BRZ voltage reference buffers.

### TIMING CHARACTERISTICS

V_{CC} = 2.7 V to 5.5 V; all specifications T_{MIN} to T_{MAX}, unless otherwise noted.

**Table 3. (Timing Characteristics)** ([table-02-p5-spec.csv](ad5791/tables/table-02-p5-spec.csv), p. 5)

| PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|
| t_{1}[^2] | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, SCLK cycle time | 40 |  |  | ns |
| t_{1}[^2] | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, SCLK cycle time | 28 |  |  | ns |
| t_{1}[^2] | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, SCLK cycle time (readback mode) | 92 |  |  | ns |
| t_{1}[^2] | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, SCLK cycle time (readback mode) | 60 |  |  | ns |
| t_{2} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, SCLK high time | 15 |  |  | ns |
| t_{2} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, SCLK high time | 10 |  |  | ns |
| t_{3} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, SCLK low time | 9 |  |  | ns |
| t_{3} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, SCLK low time | 5 |  |  | ns |
| t_{4} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ to SCLK falling edge setup time | 5 |  |  | ns |
| t_{4} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ to SCLK falling edge setup time | 5 |  |  | ns |
| t_{5} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, SCLK falling edge to S̅Y̅N̅C̅ rising edge hold time | 2 |  |  | ns |
| t_{5} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, SCLK falling edge to S̅Y̅N̅C̅ rising edge hold time | 2 |  |  | ns |
| t_{6} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, Minimum S̅Y̅N̅C̅ high time | 48 |  |  | ns |
| t_{6} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, Minimum S̅Y̅N̅C̅ high time | 40 |  |  | ns |
| t_{7} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ rising edge to next SCLK falling edge ignore | 8 |  |  | ns |
| t_{7} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ rising edge to next SCLK falling edge ignore | 6 |  |  | ns |
| t_{8} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, Data setup time | 9 |  |  | ns |
| t_{8} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, Data setup time | 7 |  |  | ns |
| t_{9} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, Data hold time | 12 |  |  | ns |
| t_{9} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, Data hold time | 7 |  |  | ns |
| t_{10} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, L̅D̅A̅C̅ falling edge to S̅Y̅N̅C̅ falling edge | 13 |  |  | ns |
| t_{10} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, L̅D̅A̅C̅ falling edge to S̅Y̅N̅C̅ falling edge | 10 |  |  | ns |
| t_{11} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ rising edge to L̅D̅A̅C̅ falling edge | 20 |  |  | ns |
| t_{11} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ rising edge to L̅D̅A̅C̅ falling edge | 16 |  |  | ns |
| t_{12} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, L̅D̅A̅C̅ pulse width low | 14 |  |  | ns |
| t_{12} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, L̅D̅A̅C̅ pulse width low | 11 |  |  | ns |
| t_{13} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, L̅D̅A̅C̅ falling edge to output response time |  | 130 |  | ns |
| t_{13} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, L̅D̅A̅C̅ falling edge to output response time |  | 130 |  | ns |
| t_{14} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ rising edge to output response time (L̅D̅A̅C̅ tied low) |  | 130 |  | ns |
| t_{14} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ rising edge to output response time (L̅D̅A̅C̅ tied low) |  | 130 |  | ns |
| t_{15} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, C̅L̅R̅ pulse width low | 50 |  |  | ns |
| t_{15} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, C̅L̅R̅ pulse width low | 50 |  |  | ns |
| t_{16} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, C̅L̅R̅ pulse activation time |  | 140 |  | ns |
| t_{16} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, C̅L̅R̅ pulse activation time |  | 140 |  | ns |
| t_{17} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ falling edge to first SCLK rising edge | 0 |  |  | ns |
| t_{17} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ falling edge to first SCLK rising edge | 0 |  |  | ns |
| t_{18} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ rising edge to SDO tristate (C_{L} = 50 pF) |  |  | 65 | ns |
| t_{18} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ rising edge to SDO tristate (C_{L} = 50 pF) |  |  | 60 | ns |
| t_{19} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, SCLK rising edge to SDO valid (C_{L} = 50 pF) |  |  | 62 | ns |
| t_{19} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, SCLK rising edge to SDO valid (C_{L} = 50 pF) |  |  | 45 | ns |
| t_{20} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, S̅Y̅N̅C̅ rising edge to SCLK rising edge ignore | 0 |  |  | ns |
| t_{20} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, S̅Y̅N̅C̅ rising edge to SCLK rising edge ignore | 0 |  |  | ns |
| t_{21} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, R̅E̅S̅E̅T̅ pulse width low |  | 35 |  | ns |
| t_{21} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, R̅E̅S̅E̅T̅ pulse width low |  | 35 |  | ns |
| t_{22} | LIMIT[^1], IOV_{CC} = 1.71 V to 3.3 V, R̅E̅S̅E̅T̅ pulse activation time |  | 150 |  | ns |
| t_{22} | LIMIT[^1], IOV_{CC} = 3.3 V to 5.5 V, R̅E̅S̅E̅T̅ pulse activation time |  | 150 |  | ns |

- **Note 1:** All input signals are specified with t_{R} = t_{F} = 1 ns/V (10% to 90% of IOV_{CC}) and timed from a voltage level of (V_{IL} + V_{IH})/2.
- **Note 2:** Maximum SCLK frequency is 35 MHz for write mode and 16 MHz for readback mode.

![Figure 2. Write Mode Timing Diagram](ad5791/figures/ad5791-f002-01.png)

*Figure 2. Write Mode Timing Diagram*

![Figure 3. Readback Mode Timing Diagram](ad5791/figures/ad5791-f002-02.png)

*Figure 3. Readback Mode Timing Diagram*

### ABSOLUTE MAXIMUM RATINGS

T_{A} = 25°C, unless otherwise noted. Transient currents of up to 100 mA do not cause SCR latch-up.

**Table 4. (Absolute Maximum Ratings)** ([table-03-p7-abs_max.csv](ad5791/tables/table-03-p7-abs_max.csv), p. 7)

| PARAMETER | RATING |
|---|---|
| V_{DD} to AGND | −0.3 V to +34 V |
| V_{SS} to AGND | −34 V to +0.3 V |
| V_{DD} to V_{SS} | −0.3 V to +34 V |
| V_{CC} to DGND | −0.3 V to +7 V |
| IOV_{CC} to DGND | −0.3 V to V_{CC} + 0.3 V or +7 V (whichever is less) |
| Digital Inputs to DGND | −0.3 V to IOV_{CC} + 0.3 V or +7 V (whichever is less) |
| V_{OUT} to AGND | −0.3 V to V_{DD} + 0.3 V |
| V_{REFPF} to AGND | −0.3 V to V_{DD} + 0.3 V |
| V_{REFPS} to AGND | −0.3 V to V_{DD} + 0.3 V |
| V_{REFNF} to AGND | V_{SS} − 0.3 V to + 0.3 V |
| V_{REFNS} to AGND | V_{SS} − 0.3 V to + 0.3 V |
| DGND to AGND | −0.3 V to +0.3 V |
| **Operating Temperature Range, T_{A}** |  |
| Industrial | −55°C to + 125°C |
| Storage Temperature Range | −65°C to +150°C |
| Maximum Junction Temperature, T_{J} max | 150°C |
| Power Dissipation | (T_{J} max – T_{A})/θ_{JA} |
| **TSSOP Package** |  |
| θ_{JA} Thermal Impedance | 143°C/W |
| θ_{JC} Thermal Impedance | 45°C/W |
| Lead Temperature | JEDEC industry standard |
| Soldering | J-STD-020 |
| ESD (Human Body Model) | 1.5 kV |

Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability.

This device is a high performance integrated circuit with an ESD rating of 1.5 kV , and it is ESD sensitive. Proper precautions should be taken for handling and assembly.

### ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

### PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

![Figure 4. Pin Configuration](ad5791/figures/ad5791-f004.png)

*Figure 4. Pin Configuration*

**Table 5. Pin Function Descriptions** ([table-04-p8-pin.csv](ad5791/tables/table-04-p8-pin.csv), p. 8)

| Pin No. | Mnemonic | Description |
|---|---|---|
| 1 | INV | Connection to Inverting Input of External Amplifier. |
| 2 | V_{OUT} | Analog Output Voltage. |
| 3 | V_{REFPS} | Positive Reference Sense Voltage Input. A voltage range of 5 V to V_{DD} − 2.5 V can be connected. A unity gain amplifier must be connected at this pin in conjunction with the V_{REFPF} pin. |
| 4 | V_{REFPF} | Positive Reference Force Voltage Input. A voltage range of 5 V to V_{DD} − 2.5 V can be connected. A unity gain amplifier must be connected at this pin in conjunction with the V_{REFPS} pin. |
| 5 | V_{DD} | Positive Analog Supply Connection. A voltage range of 7.5 V to 16.5 V can be connected; V_{DD} should be decoupled to AGND. |
| 6 | R̅E̅S̅E̅T̅ | Active Low Reset Logic Input Pin. Asserting this pin returns the AD5791-EP to its power-on status. |
| 7 | C̅L̅R̅ | Active Low Clear Logic Input Pin. Asserting this pin sets the DAC register to a user defined value and updates the DAC output. The output value depends on the DAC register coding that is being used, either binary or twos complement. |
| 8 | L̅D̅A̅C̅ | Active Low Load DAC Logic Input Pin. This is used to update the DAC register and, consequently, the analog output. When tied permanently low, the output is updated on the rising edge of S̅Y̅N̅C̅. If L̅D̅A̅C̅ is held high during the write cycle, the input register is updated, but the output update is held off until the falling edge of L̅D̅A̅C̅. The L̅D̅A̅C̅ pin should not be left unconnected. |
| 9 | V_{CC} | Digital Supply Connection. A voltage range of 2.7 V to 5.5 V can be connected. V_{CC} should be decoupled to DGND. |
| 10 | IOV_{CC} | Digital Interface Supply Pin. Digital threshold levels are referenced to the voltage applied to this pin. A voltage in the range of 1.71 V to 5.5 V can be connected. IOV_{CC} should not be allowed to exceed V_{CC}. |
| 11 | SDO | Serial Data Output Pin. Data is clocked out on the rising edge of the serial clock input. |
| 12 | SDIN | Serial Data Input Pin. This device has a 24-bit shift register. Data is clocked into the register on the falling edge of the serial clock input. |
| 13 | SCLK | Serial Clock Input. Data is clocked into the input shift register on the falling edge of the serial clock input. Data can be transferred at clock rates of up to 35 MHz. |
| 14 | S̅Y̅N̅C̅ | Active Low Digital Interface Synchronization Input Pin. This is the frame synchronization signal for the input data. When S̅Y̅N̅C̅ is low, it enables the input shift register, and data is then transferred in on the falling edges of the following clocks. The input shift register is updated on the rising edge of S̅Y̅N̅C̅. |
| 15 | DGND | Ground Reference Pin for Digital Circuitry. |
| 16 | V_{REFNF} | Negative Reference Force Voltage Input. A voltage range of V_{SS} + 2.5 V to 0 V can be connected. A unity gain amplifier must be connected at this pin in conjunction with the V_{REFNS} pin. |
| 17 | V_{REFNS} | Negative Reference Sense Voltage Input. A voltage range of V_{SS} + 2.5 V to 0 V can be connected. A unity gain amplifier must be connected at this pin in conjunction with the V_{REFNF} pin. |
| 18 | V_{SS} | Negative Analog Supply Connection. A voltage range of −16.5 V to −2.5 V can be connected. V_{SS} should be decoupled to AGND. |
| 19 | AGND | Ground Reference Pin for Analog Circuitry. |
| 20 | R_{FB} | Feedback Connection for External Amplifier. |

### TYPICAL PERFORMANCE CHARACTERISTICS

![Figure 5. Integral Nonlinearity Error vs. DAC Code, ±10 V Span](ad5791/figures/ad5791-f005.png)

*Figure 5. Integral Nonlinearity Error vs. DAC Code, ±10 V Span*

![Figure 6. Integral Nonlinearity Error vs. DAC Code, +10 V Span](ad5791/figures/ad5791-f006.png)

*Figure 6. Integral Nonlinearity Error vs. DAC Code, +10 V Span*

Digitized data: [integral-nonlinearity-error-vs-dac-code-10-v-span.csv](ad5791/curves/integral-nonlinearity-error-vs-dac-code-10-v-span.csv) (x: DAC CODE; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 7. Integral Nonlinearity Error vs. DAC Code, +5 V Span](ad5791/figures/ad5791-f007.png)

*Figure 7. Integral Nonlinearity Error vs. DAC Code, +5 V Span*

Digitized data: [integral-nonlinearity-error-vs-dac-code-5-v-span.csv](ad5791/curves/integral-nonlinearity-error-vs-dac-code-5-v-span.csv) (x: DAC CODE; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 8. Integral Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode](ad5791/figures/ad5791-f008.png)

*Figure 8. Integral Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode*

Digitized data: [integral-nonlinearity-error-vs-dac-code-10-v-span-2-gain-mode.csv](ad5791/curves/integral-nonlinearity-error-vs-dac-code-10-v-span-2-gain-mode.csv) (x: DAC CODE; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 9. Differential Nonlinearity Error vs. DAC Code, ±10 V Span](ad5791/figures/ad5791-f009.png)

*Figure 9. Differential Nonlinearity Error vs. DAC Code, ±10 V Span*

![Figure 10. Differential Nonlinearity Error vs. DAC Code, +10 V Span](ad5791/figures/ad5791-f010.png)

*Figure 10. Differential Nonlinearity Error vs. DAC Code, +10 V Span*

Digitized data: [differential-nonlinearity-error-vs-dac-code-10-v-span.csv](ad5791/curves/differential-nonlinearity-error-vs-dac-code-10-v-span.csv) (x: DAC CODE; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 11. Differential Nonlinearity Error vs. DAC Code, +5 V Span](ad5791/figures/ad5791-f011.png)

*Figure 11. Differential Nonlinearity Error vs. DAC Code, +5 V Span*

Digitized data: [differential-nonlinearity-error-vs-dac-code-5-v-span.csv](ad5791/curves/differential-nonlinearity-error-vs-dac-code-5-v-span.csv) (x: DAC CODE; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 12. Differential Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode](ad5791/figures/ad5791-f012.png)

*Figure 12. Differential Nonlinearity Error vs. DAC Code, ±10 V Span, ×2 Gain Mode*

Digitized data: [differential-nonlinearity-error-vs-dac-code-10-v-span-2-gain-mode.csv](ad5791/curves/differential-nonlinearity-error-vs-dac-code-10-v-span-2-gain-mode.csv) (x: DAC CODE; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 13. Integral Nonlinearity Error vs. Temperature](ad5791/figures/ad5791-f013.png)

*Figure 13. Integral Nonlinearity Error vs. Temperature*

Digitized data: [integral-nonlinearity-error-vs-temperature.csv](ad5791/curves/integral-nonlinearity-error-vs-temperature.csv) (x: °C; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 14. Differential Nonlinearity Error vs. Temperature](ad5791/figures/ad5791-f014.png)

*Figure 14. Differential Nonlinearity Error vs. Temperature*

Digitized data: [differential-nonlinearity-error-vs-temperature.csv](ad5791/curves/differential-nonlinearity-error-vs-temperature.csv) (x: °C; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 15. Integral Nonlinearity Error vs. Supply Voltage, ±10 V Span](ad5791/figures/ad5791-f015.png)

*Figure 15. Integral Nonlinearity Error vs. Supply Voltage, ±10 V Span*

Digitized data: [integral-nonlinearity-error-vs-supply-voltage-10-v-span.csv](ad5791/curves/integral-nonlinearity-error-vs-supply-voltage-10-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 16. Integral Nonlinearity Error vs. Supply Voltage, +5 V Span](ad5791/figures/ad5791-f016.png)

*Figure 16. Integral Nonlinearity Error vs. Supply Voltage, +5 V Span*

Digitized data: [integral-nonlinearity-error-vs-supply-voltage-5-v-span.csv](ad5791/curves/integral-nonlinearity-error-vs-supply-voltage-5-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 17. Differential Nonlinearity Error vs. Supply Voltage, ±10 V Span](ad5791/figures/ad5791-f017.png)

*Figure 17. Differential Nonlinearity Error vs. Supply Voltage, ±10 V Span*

Digitized data: [differential-nonlinearity-error-vs-supply-voltage-10-v-span.csv](ad5791/curves/differential-nonlinearity-error-vs-supply-voltage-10-v-span.csv) — values read off the printed plot by the digitizer, not published data.

![Figure 18. Differential Nonlinearity Error vs. Supply Voltage, +5 V Span](ad5791/figures/ad5791-f018.png)

*Figure 18. Differential Nonlinearity Error vs. Supply Voltage, +5 V Span*

Digitized data: [differential-nonlinearity-error-vs-supply-voltage-5-v-span.csv](ad5791/curves/differential-nonlinearity-error-vs-supply-voltage-5-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 19. Zero-Scale Error vs. Supply Voltage, ±10 V Span](ad5791/figures/ad5791-f019.png)

*Figure 19. Zero-Scale Error vs. Supply Voltage, ±10 V Span*

Digitized data: [zero-scale-error-vs-supply-voltage-10-v-span.csv](ad5791/curves/zero-scale-error-vs-supply-voltage-10-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 20. Zero-Scale Error vs. Supply Voltage, +5 V Span](ad5791/figures/ad5791-f020.png)

*Figure 20. Zero-Scale Error vs. Supply Voltage, +5 V Span*

Digitized data: [zero-scale-error-vs-supply-voltage-5-v-span.csv](ad5791/curves/zero-scale-error-vs-supply-voltage-5-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 21. Midscale Error vs. Supply Voltage, ±10 V Span](ad5791/figures/ad5791-f021.png)

*Figure 21. Midscale Error vs. Supply Voltage, ±10 V Span*

Digitized data: [midscale-error-vs-supply-voltage-10-v-span.csv](ad5791/curves/midscale-error-vs-supply-voltage-10-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 22. Midscale Error vs. Supply Voltage, +5 V Span](ad5791/figures/ad5791-f022.png)

*Figure 22. Midscale Error vs. Supply Voltage, +5 V Span*

Digitized data: [midscale-error-vs-supply-voltage-5-v-span.csv](ad5791/curves/midscale-error-vs-supply-voltage-5-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 23. Full-Scale Error vs. Supply Voltage, ±10 V Span](ad5791/figures/ad5791-f023.png)

*Figure 23. Full-Scale Error vs. Supply Voltage, ±10 V Span*

Digitized data: [full-scale-error-vs-supply-voltage-10-v-span.csv](ad5791/curves/full-scale-error-vs-supply-voltage-10-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 24. Full-Scale Error vs. Supply Voltage, +5 V Span](ad5791/figures/ad5791-f024.png)

*Figure 24. Full-Scale Error vs. Supply Voltage, +5 V Span*

Digitized data: [full-scale-error-vs-supply-voltage-5-v-span.csv](ad5791/curves/full-scale-error-vs-supply-voltage-5-v-span.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 25. Gain Error vs. Supply Voltage, ±10 V Span](ad5791/figures/ad5791-f025.png)

*Figure 25. Gain Error vs. Supply Voltage, ±10 V Span*

Digitized data: [gain-error-vs-supply-voltage-10-v-span.csv](ad5791/curves/gain-error-vs-supply-voltage-10-v-span.csv) (x: V; y: ppm FSR) — values read off the printed plot by the digitizer, not published data.

![Figure 26. Gain Error vs. Supply Voltage, +5 V Span](ad5791/figures/ad5791-f026.png)

*Figure 26. Gain Error vs. Supply Voltage, +5 V Span*

Digitized data: [gain-error-vs-supply-voltage-5-v-span.csv](ad5791/curves/gain-error-vs-supply-voltage-5-v-span.csv) (x: V; y: ppm FSR) — values read off the printed plot by the digitizer, not published data.

![Figure 27. Integral Nonlinearity Error vs. Reference Voltage](ad5791/figures/ad5791-f027.png)

*Figure 27. Integral Nonlinearity Error vs. Reference Voltage*

Digitized data: [integral-nonlinearity-error-vs-reference-voltage.csv](ad5791/curves/integral-nonlinearity-error-vs-reference-voltage.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 28. Differential Nonlinearity Error vs. Reference Voltage](ad5791/figures/ad5791-f028.png)

*Figure 28. Differential Nonlinearity Error vs. Reference Voltage*

Digitized data: [differential-nonlinearity-error-vs-reference-voltage.csv](ad5791/curves/differential-nonlinearity-error-vs-reference-voltage.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 29. Zero-Scale Error vs. Reference Voltage](ad5791/figures/ad5791-f029.png)

*Figure 29. Zero-Scale Error vs. Reference Voltage*

Digitized data: [zero-scale-error-vs-reference-voltage.csv](ad5791/curves/zero-scale-error-vs-reference-voltage.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 30. Midscale Error vs. Reference Voltage](ad5791/figures/ad5791-f030.png)

*Figure 30. Midscale Error vs. Reference Voltage*

Digitized data: [midscale-error-vs-reference-voltage.csv](ad5791/curves/midscale-error-vs-reference-voltage.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 31. Full-Scale Error vs. Reference Voltage](ad5791/figures/ad5791-f031.png)

*Figure 31. Full-Scale Error vs. Reference Voltage*

Digitized data: [full-scale-error-vs-reference-voltage.csv](ad5791/curves/full-scale-error-vs-reference-voltage.csv) (x: V; y: LSB) — values read off the printed plot by the digitizer, not published data.

![Figure 32. Gain Error vs. Reference Voltage](ad5791/figures/ad5791-f032.png)

*Figure 32. Gain Error vs. Reference Voltage*

Digitized data: [gain-error-vs-reference-voltage.csv](ad5791/curves/gain-error-vs-reference-voltage.csv) (x: V; y: ppm FSR) — values read off the printed plot by the digitizer, not published data.

![Figure 33. Full-Scale Error vs. Temperature](ad5791/figures/ad5791-f033.png)

*Figure 33. Full-Scale Error vs. Temperature*

Digitized data: [full-scale-error-vs-temperature.csv](ad5791/curves/full-scale-error-vs-temperature.csv) (x: °C; y: LSBs) — values read off the printed plot by the digitizer, not published data.

![Figure 34. Midscale Error vs. Temperature](ad5791/figures/ad5791-f034.png)

*Figure 34. Midscale Error vs. Temperature*

Digitized data: [midscale-error-vs-temperature.csv](ad5791/curves/midscale-error-vs-temperature.csv) (x: °C; y: LSBs) — values read off the printed plot by the digitizer, not published data.

![Figure 35. Zero-Scale Error vs. Temperature](ad5791/figures/ad5791-f035.png)

*Figure 35. Zero-Scale Error vs. Temperature*

Digitized data: [zero-scale-error-vs-temperature.csv](ad5791/curves/zero-scale-error-vs-temperature.csv) (x: °C; y: LSBs) — values read off the printed plot by the digitizer, not published data.

![Figure 36. Gain Error vs. Temperature](ad5791/figures/ad5791-f036.png)

*Figure 36. Gain Error vs. Temperature*

Digitized data: [gain-error-vs-temperature.csv](ad5791/curves/gain-error-vs-temperature.csv) (x: °C; y: ppm FSR) — values read off the printed plot by the digitizer, not published data.

![Figure 37. IOI_{CC} vs. Logic Input Voltage](ad5791/figures/ad5791-f037.png)

*Figure 37. IOI_{CC} vs. Logic Input Voltage*

Digitized data: [ioicc-vs-logic-input-voltage.csv](ad5791/curves/ioicc-vs-logic-input-voltage.csv) (x: V; y: µA) — values read off the printed plot by the digitizer, not published data.

![Figure 38. Power Supply Currents vs. Power Supply Voltages](ad5791/figures/ad5791-f038.png)

*Figure 38. Power Supply Currents vs. Power Supply Voltages*

Digitized data: [power-supply-currents-vs-power-supply-voltages.csv](ad5791/curves/power-supply-currents-vs-power-supply-voltages.csv) (x: V; y: mA) — values read off the printed plot by the digitizer, not published data.

![Figure 39. Rising Full-Scale Voltage Step](ad5791/figures/ad5791-f039.png)

*Figure 39. Rising Full-Scale Voltage Step*

![Figure 40. Falling Full-Scale Voltage Step](ad5791/figures/ad5791-f040.png)

*Figure 40. Falling Full-Scale Voltage Step*

![Figure 41. 500 Code Step Settling Time](ad5791/figures/ad5791-f041.png)

*Figure 41. 500 Code Step Settling Time*

Digitized data: [500-code-step-settling-time.csv](ad5791/curves/500-code-step-settling-time.csv) (x: µs; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 42. 6 MSB Segment Glitch Energy for ±10 V V_{REF}](ad5791/figures/ad5791-f042.png)

*Figure 42. 6 MSB Segment Glitch Energy for ±10 V V_{REF}*

![Figure 43. 6 MSB Segment Glitch Energy for +10 V V_{REF}](ad5791/figures/ad5791-f043.png)

*Figure 43. 6 MSB Segment Glitch Energy for +10 V V_{REF}*

Digitized data: [6-msb-segment-glitch-energy-for-10-v-vref.csv](ad5791/curves/6-msb-segment-glitch-energy-for-10-v-vref.csv) — values read off the printed plot by the digitizer, not published data.

![Figure 44. 6 MSB Segment Glitch Energy for +5 V V_{REF}](ad5791/figures/ad5791-f044.png)

*Figure 44. 6 MSB Segment Glitch Energy for +5 V V_{REF}*

Digitized data: [6-msb-segment-glitch-energy-for-5-v-vref.csv](ad5791/curves/6-msb-segment-glitch-energy-for-5-v-vref.csv) (x: CODE; y: nV-sec) — values read off the printed plot by the digitizer, not published data.

![Figure 45. Midscale Peak-to-Peak Glitch for ±10 V](ad5791/figures/ad5791-f045.png)

*Figure 45. Midscale Peak-to-Peak Glitch for ±10 V*

Digitized data: [midscale-peak-to-peak-glitch-for-10-v.csv](ad5791/curves/midscale-peak-to-peak-glitch-for-10-v.csv) (x: µs; y: mV) — values read off the printed plot by the digitizer, not published data.

![Figure 46. Voltage Output Noise, 0.1 Hz to 10 Hz Bandwidth](ad5791/figures/ad5791-f046.png)

*Figure 46. Voltage Output Noise, 0.1 Hz to 10 Hz Bandwidth*

Digitized data: [voltage-output-noise-0-1-hz-to-10-hz-bandwidth.csv](ad5791/curves/voltage-output-noise-0-1-hz-to-10-hz-bandwidth.csv) (x: Seconds; y: nV) — values read off the printed plot by the digitizer, not published data.

![Figure 47. Noise Spectral Density vs. Frequency](ad5791/figures/ad5791-f047.png)

*Figure 47. Noise Spectral Density vs. Frequency*

Digitized data: [noise-spectral-density-vs-frequency.csv](ad5791/curves/noise-spectral-density-vs-frequency.csv) (x: Hz; y: nV/√Hz) — values read off the printed plot by the digitizer, not published data.

![Figure 48. Glitch Impulse on Removal of Output Clamp](ad5791/figures/ad5791-f048.png)

*Figure 48. Glitch Impulse on Removal of Output Clamp*

Digitized data: [glitch-impulse-on-removal-of-output-clamp.csv](ad5791/curves/glitch-impulse-on-removal-of-output-clamp.csv) (x: us; y: mV) — values read off the printed plot by the digitizer, not published data.

### OUTLINE DIMENSIONS

![Figure 49. 20-Lead Thin Shrink Small Outline Package (TSSOP) (RU-20) Dimensions shown in millimeters](ad5791/figures/ad5791-f049.png)

**COMPLIANT TO JEDEC STANDARDS MO-153-AC**

*Figure 49. 20-Lead Thin Shrink Small Outline Package [TSSOP] (RU-20) Dimensions shown in millimeters*

### ORDERING GUIDE

**Ordering Guide** ([table-05-p17-data.csv](ad5791/tables/table-05-p17-data.csv), p. 17)

| Model[^1] | Temperature Range | INL | Package Description | Package Option |
|---|---|---|---|---|
| AD5791SRU-EP | −55°C to +125°C | ±1.5 LSB | 20-Lead TSSOP | RU-20 |
| AD5791SRUZ-EP | −55°C to +125°C | ±1.5 LSB | 20-Lead TSSOP | RU-20 |

- **Note 1:** Z = RoHS Compliant Part
