 Maxim Integrated Products 
 Maxim | Innovation Delivered | www.maximintegrated.com
 ---------------------------------------------------------------------------------------
 Confidential Note:  THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO MAXIM.
 THE INFORMATION IN THIS DOCUMENT IS NOT TO BE SHOWN/REPRODUCED OR 
 DISCLOSED TO ANYONE OUTSIDE OF MAXIM WITHOUT PRIOR WRITTEN PERMISSION FROM MAXIM.
 ***************************************************************************************
 Design Name	:	"max17691a_evkit_a"
 Date		:	"04/6/2020"
 Layout Designer	:	"MANIKANDAN SELVAM"
 Program version	:	014
 ***************************************************************************************
 NOTE:If "$NONE" present in NET_NAME; then the short at this location is intentional(Dummy pin in intentional short symbol).
 CAM_NET_SHORT_COUNT column indicates the CAM tool shorting count (for reference only).
 The * on the CAM_NET_SHORT_COUNT value indicates the net is shorted in two or more REFDES locations.

NOTE:Below Shorts are done physically without using dedicated short symbols.

SHORT_DESCRIPTION,CAM_NET_SHORT_COUNT
Nets ("UNNAMED_1_EKSHORT_I121_PIN2" "VIN" "VIN_EMI") shorted at locations ((592.6 915.0) (610.0 915.0) (452.8 915.0) (450.0 915.0)) on layers ("BOTTOM"),"1*"


Total Intentional Short locations reported(0+4):4
Total CAM net Short count reported:1

END OF FILE