1. Data Sheet Errata
Internet Explorerをお使いのお客様への注意: Analog.comサイトは、IE11をサポートしておりません。analog.comサイトを快適にご使用いただくには、ブラウザを更新してください。

Documentation Errata for ADSP-2185M: 16-bit, 75 MIPS, 2.5v, 2 serial ports, host port, 80 KB RAM Data Sheet

Chapter: N/A / Page 13

Doc ID: DOC-441

Change

In Table 4 (DMOVLAY Bits), the A12:0 entries for External Overlay 1 and 2 are incorrect. In both instances

Change from: "13 LSBs of Address Between 0x2000 and 0x3FFF"

Change to: "13 LSBs of Address Between 0x0000 and 0x1FFF"

Chapter: N/A / Page 13

Doc ID: DOC-451

Change

In Table 4 (DMOVLAY Bits), the A12:0 entries for External Overlay 1 and 2 are incorrect. In both instances.

Change from: "13 LSBs of Address Between 0x2000 and 0x3FFF"

Change to: "13 LSBs of Address Between 0x0000 and 0x1FFF"

Chapter: N/A / Page 15

Doc ID: DOC-445

Change

In Figure 10 (IDMA Control/OVLAY Registers), the description of bit 14 (SHORT READ ONLY) in the IDMA OVERLAY register is incorrect. The correct definition of bit 14 is:

1 = enable Short Read Only
0 = disable Short Read Only

Chapter: N/A / Page 40

Doc ID: DOC-587

Change

In the outline dimensions figure, the remove following (or similarly worded) note:

THE ACTUAL POSITION OF EACH BALL IS WITHIN ... mm OF ITS IDEAL POSITION RELATIVE TO THE BALL GRID.


Last Update Date: 2017年05月08日