ユーザ・ガイド Rev. 0
1 すべてを表示
評価ソフトウェア
2 すべてを表示

製品概要

機能と利点

  • Fully functional support evaluation kit for the ADM1272
  • Populated and tested with 48 V, 30 A, 1 mF design
  • 40 V undervoltage and 60 V overvoltage settings
  • Custom N-MOSFET footprint suits different packages
  • Supports up to 2 sense resistors in parallel
  • Supports up to 4 FETs in parallel
  • LED indicated status outputs
  • Wide input voltage range 16 V to 80 V
  • 120 V absolute maximum
  • FET temperature measurement capability
  • Supports cascade setup for multiple boards
  • Toggle and push-button switch for easy input control
  • PMBus (I2C) communication supported

製品概要

The EVAL-ADM1272EBZ is a compact, full featured evaluation board for the ADM1272. The board layout provides a clear visual of all the peripheral components and the hot swap power path. The layout also maximizes the ability of the board to dissipate heat for some of the key components on the power path, allowing the evaluation of high current hot swap setups.


Two sense-resistor slots and four (two on the bottom side) multipackage FET slots provide great flexibility and allow a wide range of application setups.


Multiple test points allow easy access to all critical points and pins. Six LEDs provide direct visual indication on variations in the board status, such as supply input, output, GPIO1, GPIO2, power good, and fault.


The kit supports PMBus™ communication, allowing users to communicate with the ADM1272. The evaluation kit also supports cascade setup so that multiple evaluation boards can be connected together and share the same PMBus.


The boards are fully compatible with the ADM1272 evaluation software, which can be downloaded from the ADM1272 product page.


A USB-to-I2C dongle (USB-SDP-CABLEZ) is required to use the evaluation software.


The standard evaluation kit is prepopulated and tested with a 48 V, 30 A hot swap design capable of working with a 1 mF output capacitor.


Complete specifications for the ADM1272 are available in the ADM1272 data sheet, which must be consulted in conjunction with user guide (UG-990) when using the evaluation board.

マーケット＆テクノロジー

対象となる製品

パッケージの内容

  • EVAL-ADM1272EBZ evaluation board

関連資料

  • すべてを表示 (2)
  • Product Selector Card (1)
  • ユーザ・ガイド (1)
    • Document Type

    ソフトウェア

    評価ソフトウェア

    Hot-Swap & Power Monitoring Evaluation Software
    ZIP
    HS-PM Evaluation Software Installer (Ver 1.5.2)
    A configuration and programming tools for use with the PMBus enabled hot swap and power monitoring parts. This version of software supports Windows XP, Windows Vista, and Windows 7.
    ADMxxxx Common Run-Time
    ZIP
    ADMxxxx Run-time Installer
    This file only needs to be downloaded and installed once for all tools that share it.

    ハードウェア (1)

    コントローラ・ボード

    購入

    表示されている価格は、1個あたりの価格です。

    価格は1個当たりの米ドルで、米国内における販売価格（FOB）で表示されておりますので、予算のためにのみご使用いただけます。　また、その価格は変更されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店または担当営業にお問い合わせください。なお、　評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。