-
Hot Swap Controllers7/13/2017PDF778 K
製品概要
機能と利点
- Fully functional support evaluation kit for the ADM1278
- Populated and tested with 12 V, 73 A, 3 mF design
- Special N-MOSFET footprint suits different packages
- Supports up to four sense resistors in parallel
- Supports up to six FETs in parallel
- LED indicated status outputs
- Wide input voltage range of up to 20 V
- FET temperature measurement capability
- Supports cascade setup for multiple boards
- Toggle and push-button switch for easy input control
- PMBus communication supported
製品概要
The EVAL-ADM1278EBZ is a compact full feature evaluation board for the ADM1278. The board layout gives users a clear visual of all the peripheral components and the hot swap power path. The layout also maximizes the board’s ability to dissipate heat for some of the key components on the power path, allowing the evaluation of very high current hot swap setups.Four sense-resistor slots and six multipackage FET slots give users great flexibility and allow a wide range of application setups.
Multiple test points allow easy access to all critical points/pins. Seven LEDs give users direct visual indication on variations in the board status, such as supply input, output, IC power good output, fault output, current sense output, and GPO outputs. An AD7291 8-channel, I2C, 12-bit SAR ADC allows users to measure voltage such as CSOUT and other pin voltages as well as to read ambient board temperature through an I2C bus in real time.
The kit supports I2C communication, allowing users to communicate with the ADM1278. The evaluation kit also supports cascade setup so multiple evaluation boards can be connected together and share the same I2C bus.
The boards are fully compatible with the ADM1278 evaluation software tool, which can be downloaded from the ADM1278 product page.
Users need a USB-SDP-CABLEZ USB-to-I2C dongle to use the evaluation software tools.
The standard evaluation kit is prepopulated and tested with a 12 V, 73A hot swap design capable of working with a 3 mF output capacitor.
Complete specifications for the ADM1278 are available in the ADM1278 data sheet from Analog Devices and should be consulted in conjunction with this user guide when using the evaluation boards.
Package Contents
Additional Hardware Needed
Software Needed
The standard evaluation kit is prepopulated and tested with a 12 V, 73A hot swap design capable of working with a 3 mF output capacitor.
Complete specifications for the ADM1278 are available in the ADM1278 data sheet from Analog Devices and should be consulted in conjunction with this user guide when using the evaluation boards.
Package Contents
- EVAL-ADM1278EBZ evaluation board
Additional Hardware Needed
- Serial I/O interface USB-SDP-CABLEZ (not included in the evaluation kit and should be ordered separately)
- Only one dongle is required in multiboard cascade setup
Software Needed
- Analog Devices, Inc., hot swap and power monitoring evaluation software
対象となる製品
関連資料
-
UG-601: ADM1278 Evaluation Board User Guide7/3/2014PDF725 kB
購入
表示されている価格は、1個あたりの価格です。
価格は1個当たりの米ドルで、米国内における販売価格(FOB)で表示されておりますので、予算のためにのみご使用いただけます。 また、その価格は変更されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店または担当営業にお問い合わせください。なお、 評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。