DC2615A
Overview
Features and Benefits
- Selectable light load operating modes of continuous conduction mode (CCM) or discontinuous mode (DCM).
- SYNC pin to synchronize the regulator to an external clock.
- PGOOD pin and RUN pin
Product Details
Demonstration circuit 2615A features the LTC7151S in a high efficiency 1.2V/15A step-down regulator with an input voltage range of 3.1V to 20V and a 1MHz switching frequency. The Silent Switcher®2 technology reduces the switching noise while the internal MOSFETs of the LTC7151S provide high efficiency over a wide input voltage range. No current sense resistor is required.
The LTC7151S employs a controlled on-time, valley current mode architecture. This architecture allows for a short minimum on-time which is ideal for high stepdown ratios. In addition, the architecture provides a fast load step response by allowing the switch node pulses to compress after the load steps up – see Figure 6.
The LTC7151S data sheet provides a complete description of the IC operation and application information. The data sheet must be read in conjunction with the quick start guide.
Applicable Parts
Documentation & Resources
-
DC2615A - Schematic2/12/2019PDF84 K
-
DC2615A - Demo Manual2/12/2019PDF549 K
-
DC2615A - Design-files2/12/2019ZIP1 M