MAX5069
Info: : PRODUCTION
searchIcon
cartIcon

MAX5069

High-Frequency, Current-Mode PWM Controller with Accurate Oscillator and Dual FET Drivers

Show More showmore-icon

2.5MHz, Universal-Input, Dual-Output PWM Controller with Precision-Programmable Switching Frequency and Start/Stop Voltage

Info: : PRODUCTION tooltip
Info: : PRODUCTION tooltip
Part Details
Part Models 7
1ku List Price Starting From $5.28
Features
  • Current-Mode Control with 47µA (typ) Startup Current
  • Oscillator Frequency Programmable to 2.5MHz
  • Resistor-Programmable ±4.5% Accurate Switching Frequency
  • Dual Gate-Drive Output for Half/Full-Bridge or Push-Pull Applications
  • Rectified 85VAC to 265VAC, or 36VDC to 72VDC Input (MAX5069A/B)
  • Input Directly Driven from 10.8V to 24V (MAX5069C/D/E)
  • Programmable Dead Time and Slope Compensation
  • Programmable Startup Voltage (UVLO)
  • Programmable UVLO Hysteresis (MAX5069B/C/E)
  • Frequency Synchronization Input (MAX5069A/D)
  • -40°C to +125°C Automotive Temperature Range
  • 16-Pin Thermally Enhanced TSSOP-EP Package
Additional Details
show more Icon

The MAX5069 is a high-frequency, current-mode, pulse-width modulation (PWM) controller (with dual MOSFET drivers) that integrates all the building blocks necessary for implementing AC-DC or DC-DC fixed-frequency power supplies. Isolated or nonisolated pushpull and half/full-bridge power supplies are easily constructed using either primary- or secondary-side regulation. Current-mode control with leading-edge blanking simplifies control-loop design and a programmable internal slope-compensation circuit stabilizes the current loop when operating at duty cycles above 50%.

An input undervoltage lockout (UVLO) programs the input-supply startup voltage and ensures proper operation during brownout conditions.

A single external resistor programs the oscillator frequency from 50kHz to 2.5MHz. The MAX5069A/D provide a SYNC input for synchronization to an external clock. The maximum FET-driver duty cycle for the MAX5069 is 50%. Programmable dead time allows additional flexibility in optimizing magnetic design and overcoming parasitic effects. Programmable hiccup current limit provides additional protection under severe faults.

The MAX5069 is specified over the -40°C to +125°C automotive temperature range and is available in a 16-pin thermally enhanced TSSOP-EP package. Refer to the MAX5068 data sheet for single FET-driver applications.

Warning: The MAX5069 is designed to work with high voltages. Exercise caution.

Applications

  • Industrial Power Conversion
  • Isolated Telecom Power Supplies
  • Networking System Power Supplies
  • Server Power Supplies
  • Universal-Input AC Power Supplies
Part Models 7
1ku List Price Starting From $5.28

close icon
Documentation

Documentation

Part Model Pin/Package Drawing Documentation CAD Symbols, Footprints, and 3D Models
MAX5069AAUE+
  • HTML
  • HTML
MAX5069BAUE+
  • HTML
  • HTML
MAX5069BAUE+T
  • HTML
  • HTML
MAX5069CAUE+
  • HTML
  • HTML
MAX5069CAUE+T
  • HTML
  • HTML
MAX5069DAUE+
  • HTML
  • HTML
MAX5069DAUE+T
  • HTML
  • HTML

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

May 11, 2022

- 2236N

ASSEMBLY

MAX5069AAUE+

LAST TIME BUY

MAX5069BAUE+

PRODUCTION

MAX5069BAUE+T

PRODUCTION

MAX5069CAUE+

PRODUCTION

MAX5069CAUE+T

PRODUCTION

Dec 11, 2018

- 1754N

ASSEMBLY

MAX5069AAUE+

LAST TIME BUY

MAX5069BAUE+

PRODUCTION

MAX5069BAUE+T

PRODUCTION

MAX5069CAUE+

PRODUCTION

MAX5069CAUE+T

PRODUCTION

Jul 13, 2022

- 2236A

ASSEMBLY

MAX5069DAUE+

PRODUCTION

MAX5069DAUE+T

PRODUCTION

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

May 11, 2022

- 2236N

arrow down

ASSEMBLY

MAX5069AAUE+

LAST TIME BUY

MAX5069BAUE+

PRODUCTION

MAX5069BAUE+T

PRODUCTION

MAX5069CAUE+

PRODUCTION

MAX5069CAUE+T

PRODUCTION

Dec 11, 2018

- 1754N

arrow down

ASSEMBLY

MAX5069AAUE+

LAST TIME BUY

MAX5069BAUE+

PRODUCTION

MAX5069BAUE+T

PRODUCTION

MAX5069CAUE+

PRODUCTION

MAX5069CAUE+T

PRODUCTION

Jul 13, 2022

- 2236A

arrow down

ASSEMBLY

MAX5069DAUE+

PRODUCTION

MAX5069DAUE+T

PRODUCTION

Software & Part Ecosystem

Software & Part Ecosystem

Evaluation Kit

Evaluation Kits 2

MAX5069A_EVKIT

Evaluation Kit for the MAX5069A

zoom

MAX5069A_EVKIT

Evaluation Kit for the MAX5069A

Evaluation Kit for the MAX5069A

Features and Benefits

  • 120W High-Efficiency, Isolated, Push-Pull DC-DC Converter
  • ±36V to ±72V Input Range
  • +12V Output at 10A
  • VOUT Regulation Better than 0.1% Over Line and Load
  • 91% Efficiency at 48V and 10A
  • Programmable Input UVLO
  • Cycle-by-Cycle Current-Limit Protection
  • Programmable Integrating Fault Protection
  • 500kHz Oscillator Frequency
  • External Clock SYNC Input
  • Fully Assembled and Tested
  • Product Detail

    The MAX5069A evaluation kit (EV kit) is a fully assembled and tested circuit board that contains a high-efficiency, 120W isolated push-pull DC-DC converter. The circuit is configured for a +12V output voltage and provides up to 10A of output current. The circuit can be powered from either a +36V to +72V or -36V to -72V DC source, as used in the telecom/datacom markets, industrial environments, or in automotive 42V power systems.

    High efficiency up to 91% is achieved at 10A while using two n-channel primary-side MOSFETs switching at up to 90% combined duty cycle. On the secondary-side, reduced output-voltage ripple and high efficiency is achieved through full-wave rectification from a centertapped planar transformer. Galvanic isolation up to 500V is achieved by an optocoupler and the planar surfacemount transformer. The optocoupler helps in providing isolated secondary-side regulation.

    Operation at 500kHz allows the use of small magnetics and output capacitors. A SYNC input is featured to ease synchronization to an external clock. The EV kit provides cycle-by-cycle current-limit protection. Additional steadystate fault protection is provided by the integrating fault protection that reduces average dissipated power during continuous overload conditions. The MAX5069A also has a programmable input undervoltage lockout (UVLO) for protection during brownout conditions. The EV kit may be used to evaluate other versions of the MAX5069.

    Warning: The MAX5069A EV kit is designed to operate with high voltages. Dangerous voltages are present on this EV kit and on equipment connected to it. Users who power up this EV kit or power the sources connected to it must be careful to follow safety procedures appropriate to working with high-voltage electrical equipment.

    Under severe fault or failure conditions, this EV kit may dissipate large amounts of power, which could result in the mechanical ejection of a component or of component debris at high velocity. Operate this kit with care to avoid possible personal injury.

    Applications

    • Industrial Power Conversion
    • Isolated Telecom Power Supplies
    • Networking System Power Supplies
    • Server Power Supplies
    • Universal-Input AC Power Supplies

    MAX5069AEVKIT

    Evaluation Kit for the MAX5069A

    zoom

    MAX5069AEVKIT

    Evaluation Kit for the MAX5069A

    Evaluation Kit for the MAX5069A

    Features and Benefits

  • 120W High-Efficiency, Isolated, Push-Pull DC-DC Converter
  • ±36V to ±72V Input Range
  • +12V Output at 10A
  • VOUT Regulation Better than 0.1% Over Line and Load
  • 91% Efficiency at 48V and 10A
  • Programmable Input UVLO
  • Cycle-by-Cycle Current-Limit Protection
  • Programmable Integrating Fault Protection
  • 500kHz Oscillator Frequency
  • External Clock SYNC Input
  • Fully Assembled and Tested
  • Product Detail

    The MAX5069A evaluation kit (EV kit) is a fully assembled and tested circuit board that contains a high-efficiency, 120W isolated push-pull DC-DC converter. The circuit is configured for a +12V output voltage and provides up to 10A of output current. The circuit can be powered from either a +36V to +72V or -36V to -72V DC source, as used in the telecom/datacom markets, industrial environments, or in automotive 42V power systems.

    High efficiency up to 91% is achieved at 10A while using two n-channel primary-side MOSFETs switching at up to 90% combined duty cycle. On the secondary-side, reduced output-voltage ripple and high efficiency is achieved through full-wave rectification from a centertapped planar transformer. Galvanic isolation up to 500V is achieved by an optocoupler and the planar surfacemount transformer. The optocoupler helps in providing isolated secondary-side regulation.

    Operation at 500kHz allows the use of small magnetics and output capacitors. A SYNC input is featured to ease synchronization to an external clock. The EV kit provides cycle-by-cycle current-limit protection. Additional steadystate fault protection is provided by the integrating fault protection that reduces average dissipated power during continuous overload conditions. The MAX5069A also has a programmable input undervoltage lockout (UVLO) for protection during brownout conditions. The EV kit may be used to evaluate other versions of the MAX5069.

    Warning: The MAX5069A EV kit is designed to operate with high voltages. Dangerous voltages are present on this EV kit and on equipment connected to it. Users who power up this EV kit or power the sources connected to it must be careful to follow safety procedures appropriate to working with high-voltage electrical equipment.

    Under severe fault or failure conditions, this EV kit may dissipate large amounts of power, which could result in the mechanical ejection of a component or of component debris at high velocity. Operate this kit with care to avoid possible personal injury.

    Applications

    • Industrial Power Conversion
    • Isolated Telecom Power Supplies
    • Networking System Power Supplies
    • Server Power Supplies
    • Universal-Input AC Power Supplies

    Recently Viewed