LTC4253
LTC4253A
Info : RECOMMENDED FOR NEW DESIGNS
searchIcon
cartIcon

LTC4253
LTC4253A

–48V Hot Swap Controller with Sequencer

Show More showmore-icon

Info : RECOMMENDED FOR NEW DESIGNS tooltip
Info : RECOMMENDED FOR NEW DESIGNS tooltip
Part Details
Part Models 4
1ku List Price Starting From $3.54
Features
  • Allows Safe Board Insertion and Removal from a Live -48V Backplane
  • Floating Topology Permits Very High Voltage Operation
  • Adjustable Analog Current Limit with Breaker Timer Ideal for Two Battery Feeds
  • Fast Response Time Limits Peak Fault Current
  • Adjustable Undervoltage/Overvoltage Protection with ±1% Threshold Accuracy (LTC4253A)
  • Three Sequenced Power Good Outputs
  • Adjustable Soft-Start Current Limit
  • Adjustable Timer with Drain Voltage Accelerated Response
  • Latchoff After Fault
  • Available in a 16-Pin SSOP Package
Additional Details
show more Icon

The LTC4253/LTC4253A negative voltage Hot Swap controllers allow a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current-limiting: a timed circuit breaker, active current limiting and a fast feedforward path that limits peak current under worst-case catastrophic fault conditions. The LTC4253/LTC4253A latch off after a circuit fault.

Adjustable undervoltage and overvoltage detectors disconnect the load whenever the input supply exceeds the desired operating range. The LTC4253/LTC4253A’s supply input is shunt-regulated, allowing safe operation with very high supply voltages. A multifunction timer delays initial startup and controls the circuit breaker’s response time. The circuit breaker’s response time can be accelerated by sensing excessive MOSFET drain voltage, keeping the MOSFET within its safe operating area (SOA). An adjustable soft-start circuit controls MOSFET inrush current at start-up.

 Three power good outputs are sequenced by an adjustable timer and two ENABLE inputs to enable external power modules at start-up or disable them if the circuit breaker trips. The LTC4253A features tight ±1% undervoltage/ overvoltage threshold accuracy. The LTC4253/LTC4253A are available in a 16-pin SSOP.

  Notes
LTC4253  
LTC4253A Recommend LTC4253B for new designs
LTC4253A-ADJ Recommend LTC4253B for new designs
LTC4253B  

Applications

  • -48V Distributed Power Systems
  •  Negative Power Supply Control
  • Central Office Switching
  • High Availability Servers
  • Disk Arrays
Part Models 4
1ku List Price Starting From $3.54

close icon
Documentation

Documentation

Part Model Pin/Package Drawing Documentation CAD Symbols, Footprints, and 3D Models
LTC4253CGN#PBF
  • HTML
  • HTML
LTC4253CGN#TRPBF
  • HTML
  • HTML
LTC4253IGN#PBF
  • HTML
  • HTML
LTC4253IGN#TRPBF
  • HTML
  • HTML

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

Oct 11, 2022

- 22_0235

Epoxy Change from Henkel 8290 to 8290A for GN Package

LTC4253CGN#PBF

PRODUCTION

LTC4253CGN#TRPBF

PRODUCTION

LTC4253IGN#PBF

PRODUCTION

LTC4253IGN#TRPBF

PRODUCTION

Apr 6, 2022

- 22_0066

Laser Top Mark for 16QSOP Assembled in ADPG [PNG]

LTC4253CGN#PBF

PRODUCTION

LTC4253CGN#TRPBF

PRODUCTION

LTC4253IGN#PBF

PRODUCTION

LTC4253IGN#TRPBF

PRODUCTION

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

Oct 11, 2022

- 22_0235

arrow down

Epoxy Change from Henkel 8290 to 8290A for GN Package

LTC4253CGN#PBF

PRODUCTION

LTC4253CGN#TRPBF

PRODUCTION

LTC4253IGN#PBF

PRODUCTION

LTC4253IGN#TRPBF

PRODUCTION

Apr 6, 2022

- 22_0066

arrow down

Laser Top Mark for 16QSOP Assembled in ADPG [PNG]

LTC4253CGN#PBF

PRODUCTION

LTC4253CGN#TRPBF

PRODUCTION

LTC4253IGN#PBF

PRODUCTION

LTC4253IGN#TRPBF

PRODUCTION

Software & Part Ecosystem

Software & Part Ecosystem

Recently Viewed