LTC3861-1
Info : RECOMMENDED FOR NEW DESIGNS
searchIcon
cartIcon

LTC3861-1

Dual, Multiphase Step-Down Voltage Mode DC/DC Controller with Accurate Current Sharing

Show More showmore-icon

Info : RECOMMENDED FOR NEW DESIGNS tooltip
Info : RECOMMENDED FOR NEW DESIGNS tooltip
Part Models 4
1ku List Price Starting From $3.32
Features
  • Operates with Power Blocks, DrMOS or External Gate Drivers and MOSFETs
  • Constant-Frequency Voltage Mode Control with Accurate Current Sharing
  • ±0.75% 0.6V Voltage Reference
  • Differential Remote Output Voltage Sense Amplifier
  • Multiphase Capability—Up to 12-Phase Operation
  • Programmable Current Limit
  • Safely Powers a Prebiased Load
  • Programmable or PLL-Synchronizable Switching Frequency Up to 2.25MHz
  • Lossless Current Sensing Using Inductor DCR or Precision Current Sensing with Sense Resistor
  • VCC Range: 3V to 5.5V
  • VIN Range: 3V to 24V
  • Power Good Output Voltage Monitor
  • Output Voltage Tracking Capability
  • Programmable Soft-Start
  • Available in a 32-Pin 5mm × 5mm QFN Package
Additional Details
show more Icon

The LTC3861-1 is a dual PolyPhase® synchronous stepdown switching regulator controller for high current distributed power systems, digital signal processors, and other telecom and industrial DC/DC power supplies. It uses a constant-frequency voltage mode architecture combined with very low offset, high bandwidth error amplifiers and a remote output sense differential amplifier for excellent transient response and output regulation.

The controller incorporates lossless inductor DCR current sensing to maintain current balance between phases and to provide overcurrent protection. The chip operates from a VCC supply between 3V and 5.5V and is designed for stepdown conversion from VIN between 3V and 24V to output voltages between 0.6V and VCC – 0.5V.

Inductor current reversal is disabled during soft-start to safely power prebiased loads. The constant operating frequency can be synchronized to an external clock or linearly programmed from 250kHz to 2.25MHz. Up to six LTC3861-1 controllers can operate in parallel for 1-, 2-, 3-, 4-, 6- or 12-phase operation.

The LTC3861-1 is pin-to-pin compatible with the LTC3860. It is available in a 32-pin 5mm × 5mm QFN package. The LTC3861is a 36-pin QFN version of the LTC3861-1, which has dual differential output voltage sense amplifiers.

# Diff Amps Config Pin Package
LTC3861 2 Yes 5 x 6 QFN-36
LTC3861-1 1 No 5 x 5 QFN-32


Applications

  • High Current Distributed Power Systems
  • DSP, FPGA and ASIC Supplies
  • Datacom and Telecom Systems
  • Industrial Power Supplies
Part Models 4
1ku List Price Starting From $3.32

close icon

Documentation

Part Model Pin/Package Drawing Documentation CAD Symbols, Footprints, and 3D Models
LTC3861EUH-1#PBF
  • HTML
  • HTML
LTC3861EUH-1#TRPBF
  • HTML
  • HTML
LTC3861IUH-1#PBF
  • HTML
  • HTML
LTC3861IUH-1#TRPBF
  • HTML
  • HTML

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

Jan 20, 2022

- 21_0269

Addition of Alternate Assembly Site ASE Taiwan for Select LFCSP Products

LTC3861EUH-1#PBF

PRODUCTION

LTC3861EUH-1#TRPBF

PRODUCTION

LTC3861IUH-1#PBF

PRODUCTION

LTC3861IUH-1#TRPBF

PRODUCTION

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

Jan 20, 2022

- 21_0269

arrow down

Addition of Alternate Assembly Site ASE Taiwan for Select LFCSP Products

LTC3861EUH-1#PBF

PRODUCTION

LTC3861EUH-1#TRPBF

PRODUCTION

LTC3861IUH-1#PBF

PRODUCTION

LTC3861IUH-1#TRPBF

PRODUCTION

Software & Part Ecosystem

Tools & Simulations 1

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Recently Viewed