LTC1517-5
Info: : PRODUCTION
searchIcon
cartIcon

LTC1517-5

Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package

Show More showmore-icon

Info: : PRODUCTION tooltip
Info: : PRODUCTION tooltip
Part Models 4
1ku List Price Starting From $2.85
Features
  • Ultralow Power: ICC = 6µA Typ
  • Short-Circuit/Thermal Protected
  • 5V ±4% Regulated Output
  • VIN Range: 2.7V to 5V
  • Output Current:
    • 10mA (VIN > 2.7V)
    • 20mA (VIN > 3V)
  • No Inductors
  • Ultrasmall Application Circuit (0.045in2)
  • 800kHz Switching Frequency
  • Available in 5-Pin SOT-23
Additional Details
show more Icon

The LTC1517-5 is a micropower charge pump DC/DC converter that produces a regulated 5V output. The input voltage range is 2.7V to 5V. Extremely low operating current (typically 6µA with no load) and low external parts count (one 0.1µF flying capacitor and two small bypass capacitors at VIN and VOUT) make the part ideally suited for small, light load battery-powered applications. The total printed circuit board area of the application circuit shown below is only 0.045in2.

The part operates as a Burst Mode switched-capacitor voltage doubler to produce a regulated output. The part has thermal shutdown capability and can survive a continuous short circuit from VOUT to GND. The device is available in a 5-pin SOT-23 package.

Applications

  • Cellular Telephones
  • Battery-Operated Equipment
  • Local Power Supplies
  • Handheld Instruments
  • PCMCIA Supplies
Part Models 4
1ku List Price Starting From $2.85

close icon

Documentation

Part Model Pin/Package Drawing Documentation CAD Symbols, Footprints, and 3D Models
LTC1517CS5-5#TRMPBF
  • HTML
  • HTML
LTC1517CS5-5#TRPBF
  • HTML
  • HTML
LTC1517ES5-5#TRMPBF
  • HTML
  • HTML
LTC1517ES5-5#TRPBF
  • HTML
  • HTML

Software & Part Ecosystem

Evaluation Kits 2

DC174A-A

LTC1517CS5-5 Demo Board | Micropower Regulated 5V Charge Pump DC/DC Converter

DC174A-B

LTC1517CS5-3.3 Demo Board | Micropower Regulated 5V Charge Pump DC/DC Converter

Tools & Simulations 1

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

To launch ready-to-run LTspice demonstration circuits for this part:

Step 1: Download and install LTspice on your computer.

Step 2: Click on the link in the section below to download a demonstration circuit.

Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.

Recently Viewed