Analog Devices RF and microwave components are available as drop-in X-MWblocks^®
from Quantic^™ X-Microwave.

Get the X-MWblock® drop-in module for this part.

HMC773ALC3B

PRODUCTION

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer

Data Sheet (Rev. F) Product Selection Table

Part Models: 3
1ku List Price: price unavailable

Viewing:

Part Details

Conversion loss: 9 dB typical
Local oscillator (LO) to radio frequency (RF) isolation: 37 dB typical
LO to intermediate frequency (IF) isolation: 37 dB typical
RF to IF isolation: 20 dB typical
Input third-order intercept (IP3): 20 dBm typical

Input second-order intercept (IP2): 50 dBm typical
Input power for 1 dB compression (P1dB): 10 dBm typical
IF bandwidth: dc to 8 GHz
Passive: no dc bias required
3 mm × 3 mm, 12-terminal ceramic LCC package

Part Models: 3
1ku List Price: price unavailable

Documentation

Data Sheet 1

HMC773ALC3B: 6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer Data Sheet (Rev.F) 09/10/2015

Technical Articles 1

The Changing Landscape of Frequency Mixing Components 09/01/2016

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
HMC773ALC3B	12-Lead LCC (2.9mm x 2.9mm w/ EP)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
HMC773ALC3BTR	12-Lead LCC (2.9mm x 2.9mm w/ EP)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
HMC773ALC3BTR-R5	12-Lead LCC (2.9mm x 2.9mm w/ EP)	Material Declaration Reliablity Data	Ultra Librarian SamacSys

This is the most up-to-date revision of the Data Sheet.

Tools & Simulations

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Open Tool

S-Parameter 1

HMC773A S-Parameters

Evaluation Kits

Scalable 32 Element Hybrid Beamforming Phased-Array RADAR Development Platform

Buy Now View Details

Features and Benefits

Stingray X/Ku Phased Array Proto-typing Board

32 Channel Analog Phased Array Prototyping Platform
8x ADAR1000 Analog Phased Array Beamforming ICs
32x ADTR Transmit/Receive ICs
RF In, RF Out Design
Individual RFIO for each BFIC
10 GHz Lattice Spacing
Stand-Alone RF Detector/ADC Combo for Calibration
PMOD and SDP Connectors for Programming
On-Board Power Regulation from Single 12V Power Adapter (Included)

XUD1A X/C Band Up/Down Converter

X Band (RF) to C Band (IF) up/down converter
4 TX/RX RF Input/Output via SMA
4 TX IF Inputs via SMPM
4 RX IF Output via SMPM
External LO or Internal PLL Options
PMOD Connector for Programming
Interposer Board via PMOD to allow SDP and FMC Connectors for Programming
On-Board Power Regulation from Single 12V Power Adapter (Included)

MxFE Evaluation Board

Mates with Xilinx ZCU102 Evaluation Board (Not Included)
4x RF Receive (Rx) Channels (8x Digital Rx Channels)

Total 4x 12-bit 4GSPS ADC
8x Digital Down Converters (DDCs), Each Including Complex Numerically-Controlled Oscillators (NCOs)
8x Programmable Finite Impulse Response Filters (pFIRs)

4x RF Transmit (Tx) Channels (8x Digital Tx Channels)

Total 4x 16-bit 12GSPS DAC
8x Digital Up Converters (DUCs), Each Including Complex Numerically-Controlled Oscillators (NCOs)

Flexible Clock Distribution

On-Board Clock Distribution from Single External 500MHz Reference
Support for External Converter Clock

On-Board Power Regulation Powered by ZCU102 Evaluation Board via FMC Connector

Software Features and Benefits
Easy Control Tools and Platform Interfaces to Simplify Software Framework Developments:

MATLAB System Applications GUI
Example HDL Builds including JESD204b/JESD204c Bring-Up
Embedded Software Solutions for Linux and Device Drivers

Software Reference Design Examples for ADEF Applications to Reduce Prototyping Time:

Hybrid Beamsteering Capability
System Phase Calibration

Product Details

The X-Band Development Platform contains one MxFE^® software defined, direct RF sampling transceivers, X-Band to C-Band Up/Down Converter, and a X/Ku Band analog phased array proto-typing platform. The target application is phased array radars, electronic warfare, and ground-based SATCOM, specifically a X Band 32 transmit/32 receive channel hybrid beamforming phased array radar.

The X-Band Development Platform highlights a complete system solution. It is intended as a testbed for demonstrating hybrid beamforming phased array radar as well as the implementation of system level calibrations, beamforming algorithms, and other signal processing algorithms. The system is designed to mate with a ZCU102 Evaluation Board from Xilinx®, which features the Zynq^® UltraScale+^™ MPSoC FPGA, with provided reference software, HDL code, and MATLAB system-level interfacing software.

The system can be used to enable quick time-to-market development programs for applications like: