ADL5375
Info: : PRODUCTION
searchIcon
cartIcon

ADL5375

400 MHz TO 6 GHz Broadband Quadrature Modulator

Show More showmore-icon

Info: : PRODUCTION tooltip
Info: : PRODUCTION tooltip
Part Details
Part Models 5
1ku List Price Starting From $6.21
Features
  • Output frequency range: 400 MHz to 6 GHz
  • 1 dB output compression: ≥9.4 dBm from 450 MHz to 4 GHz
  • Output return loss ≤12 dB from 450 MHz to 4.5 GHz
  • Noise floor: −160 dBm/Hz @ 900 MHz
  • Sideband suppression: ≤−50 dBc @ 900 MHz
  • Carrier feedthrough: ≤−40 dBm @ 900 MHz
  • IQ3dB bandwidth: ≥ 750 MHz
  • Baseband input bias level
    ADL5375-05: 500 mV
    ADL5375-15: 1500 mV
  • Single supply: 4.75 V to 5.25 V
  • 24-lead LFCSP_VQ package
ADL5375-EP supports defense and aerospace applications (AQEC standard)
  • Download ADL5375-EP Data Sheet (pdf)
  • Extended temperature range: −55ºC to +105°C
  • Controlled manufacturing baseline
  • One assembly/test site
  • One fabrication site
  • Enhanced product change notification
  • Qualification data available on request
  • V62/12649 DSCC Drawing Number

Additional Details
show more Icon

The ADL5375 is a broadband quadrature modulator designed for operation from 400 MHz to 6 GHz. Its excellent phase accuracy and amplitude balance enable high performance intermediate frequency or direct radio frequency modulation for communication systems.

The ADL5375 features a broad baseband bandwidth, along with an output gain flatness that varies no more than 1 dB from 450 MHz to 3.8 GHz. These features, coupled with a broadband output return loss of <−14 dB, make the ADL5375 ideally suited for broadband zero IF or low IF-to-RF applications, broadband digital predistortion transmitters, and multiband radio designs.

The ADL5375 accepts two differential baseband inputs and a single-ended LO. It generates a single-ended 50 Ω output. The two versions offer input baseband bias levels of 500 mV (ADL5375-05) and 1500 mV (ADL5375-15).

The ADL5375 is fabricated using an advanced silicon-germanium bipolar process. It is available in a 24-lead, exposed paddle, Pb-free, LFCSP_VQ package. Performance is specified over a −40°C to +85°C temperature range. A Pb-free evaluation board is also available.

Applications

  • Cellular communication systems
    GSM/EDGE, CDMA2000, W-CDMA, TD-SCDMA
  • WiMAX/broadband wireless access systems
  • Satellite modems
Part Models 5
1ku List Price Starting From $6.21

close icon
Documentation

Documentation

Video

Part Model Pin/Package Drawing Documentation CAD Symbols, Footprints, and 3D Models
ADL5375-05ACPZ-R2
  • HTML
  • HTML
ADL5375-05ACPZ-R7
  • HTML
  • HTML
ADL5375-05SCPZEPR7
  • HTML
  • HTML
ADL5375-15ACPZ-R7
  • HTML
  • HTML
ADL5375-15ACPZ-WP
  • HTML
  • HTML

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

May 22, 2012

- 12_0063

Conversion of Select Sizes of LFCSP Package Outlines from Punch to Sawn and Transfer of Assembly Site to ASE-Korea.

Jun 18, 2010

- 10_0141

ADL5375-05 and ADL5375-15 Mask Change and Datasheet Change

ADL5375-05ACPZ-R7

PRODUCTION

ADL5375-15ACPZ-R7

PRODUCTION

ADL5375-15ACPZ-WP

PRODUCTION

Apr 2, 2013

- 12_0063

Conversion of Select Sizes of LFCSP Package Outlines from Punch to Sawn and Transfer of Assembly Site to ASE-Korea.

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

May 22, 2012

- 12_0063

arrow down

Conversion of Select Sizes of LFCSP Package Outlines from Punch to Sawn and Transfer of Assembly Site to ASE-Korea.

Jun 18, 2010

- 10_0141

arrow down

ADL5375-05 and ADL5375-15 Mask Change and Datasheet Change

ADL5375-05ACPZ-R7

PRODUCTION

ADL5375-15ACPZ-R7

PRODUCTION

ADL5375-15ACPZ-WP

PRODUCTION

Apr 2, 2013

- 12_0063

arrow down

Conversion of Select Sizes of LFCSP Package Outlines from Punch to Sawn and Transfer of Assembly Site to ASE-Korea.

Software & Part Ecosystem

Software & Part Ecosystem

Evaluation Kit

Evaluation Kits 2

EVAL-ADL5375

ADL5375 Evaluation Boards

zoom

EVAL-ADL5375

ADL5375 Evaluation Boards

ADL5375 Evaluation Boards

Product Detail

ADL5375-05-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5 V/500 mA power supply. The 5 V power supply should be connected to the clip leads labeled VPOS and GND. The LO and baseband inputs (which should be biased at 0.5 V) are applied to edge-mounted SMA-type RF connectors. The ADL5375 output drives the ADL5320 driver amplifier with its output and is available at the SMA connector labeled AMP_OUT. The ADL5375's output can be accessed directly at the SMA connector labeled AMP_IN/SMA_OUT (remove R2 and install zero ohms in R1). The evaluation board also includes options to drive the LO differentially through a balun along with pads that can be used to implement a harmonic filter in the LO path.

ADL5375-15-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5 V/500 mA power supply. The 5 V power supply should be connected to the clip leads labeled VPOS and GND. The LO and baseband inputs (which should be biased at 1.5 V) are applied to edge-mounted SMA-type RF connectors. The ADL5375 output drives the ADL5320 driver amplifier with its output is available at the SMA connector labeled AMP_OUT. The ADL5375's output can be accessed directly at the SMA connector labeled AMP_IN/SMA_OUT (remove R2 and install zero ohms in R1). The evaluation board also includes options to drive the LO differentially through a balun along with pads that can be used to implement a harmonic filter in the LO path.

reference details image

AD-FMCOMMS1-EBZ

FPGA Mezzanine Card for Wireless Communications

zoom

AD-FMCOMMS1-EBZ

FPGA Mezzanine Card for Wireless Communications

FPGA Mezzanine Card for Wireless Communications

Features and Benefits

  • Includes schematics, layout, BOM, Gerber files, HDL, Linux® drivers, IIO Oscilloscope, VisualANALOG
  • FMC-compatible form factor
  • Powered from FMC connector
  • Provides one channel of ADC and one channel of DAC with full synchronization capabilities

Product Detail

This board is no longer available for ordering.

The AD-FMCOMMS1-EBZ high-speed analog module is designed to showcase the latest generation high-speed data converters. The AD-FMCOMMS1-EBZ provides the analog front-end for a wide range of compute-intensive FPGA-based radio applications.

The AD-FMCOMMS1-EBZ is an analog front end hardware platform that addresses a broad range of research, academic, industrial and defense applications. The AD-FMCOMMS1-EBZ enables RF applications from 400MHz to 4 GHz. The module is customizable to a wide range of frequencies by software without any hardware changes, providing options for GPS or IEEE 1588 Synchronization, and MIMO configurations.

When combined with the Xilinx ZYNQ® Software-Defined Radio Kit, AD-FMCOMMS1-EBZ enables a variety of wireless communications functions at the physical layer, from baseband to RF. With up to 4 GB of flash storage space, 512 MB of RAM, Gigabit Ethernet interface (depending on the base platform) and a Linux image built specifically for the AD-FMCOMMS1-EBZ, you can get everything you need for a easy out of the box experience. The platform offers enough flexibility for many applications, and supports streaming data, and standard web interfaces to analyze transmitted RF data.

Applications

  • Electronic test and measurement equipment
  • General-purpose software radios
  • Radar systems
  • Ultra wideband satellite receivers
  • Point to point communication systems
Tools & Simulations

Tools & Simulations 2

Reference Designs

Reference Designs 5

Block Diagram of AD9139-DUAL-EBZ Evaluation Board

Wideband Baseband I/Q Transmitter Design Using Two AD9139 Devices with Multi-DAC Synchronization

zoomopens a dialog

CN0432

Wideband Baseband I/Q Transmitter Design Using Two AD9139 Devices with Multi-DAC Synchronization

CN0432

Circuits from the lab

tooltip Info:Circuits from the lab
Wideband Baseband I/Q Transmitter Design Using Two AD9139 Devices with Multi-DAC Synchronization

Features and Benefits

  • Wide IQ Bandwidth (1150 MHz)
  • Low Error Vector Magnitude (EVM)
  • Synchronous Channels
View Detailed Reference Design external link

Design & Integration Tools

pdf icon

ZIP

2.15 M

Interface Between the AD9122 and ADL5375-05 with 50 Ω Resistors to Ground

Interfacing the ADL5375 I/Q Modulator to the AD9122 Dual Channel, 1.2 GSPS High Speed DAC

zoomopens a dialog

CN0205

Interfacing the ADL5375 I/Q Modulator to the AD9122 Dual Channel, 1.2 GSPS High Speed DAC

CN0205

Circuits from the lab

tooltip Info:Circuits from the lab
Interfacing the ADL5375 I/Q Modulator to the AD9122 Dual Channel, 1.2 GSPS High Speed DAC

Features and Benefits

  • High speed DAC to IQ modulator interface
  • Requires zero IF frequencys
  • Dual DAC provides common biasing for level shifting
View Detailed Reference Design external link

Design & Integration Tools

pdf icon

zip

3338 kB

Circuit Schematic for IQ Modulator with Output Power Gain

Providing Fixed Power Gain at the Output of an IQ Modulator

ADF4351 RF Output Filter Schematic

Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

zoomopens a dialog

CN0285

Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

CN0285

Circuits from the lab

tooltip Info:Circuits from the lab
Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

Features and Benefits

  • Broadband direct conversion transmitter
  • 500MHz to 4.4GHz RF
  • Low phase noise
  • Low error vector magnitude (EVM)
View Detailed Reference Design external link
Direct Conversion Transmitter

Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

zoomopens a dialog

CN0134

Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

CN0134

Circuits from the lab

tooltip Info:Circuits from the lab
Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

Features and Benefits

  • Direct conversion broadband transmitter
  • Functions from 500 MHz to 4.4 GHz
  • Excellent phase noise reduces errors
View Detailed Reference Design external link

Recently Viewed