Secure physical entry systems are being deployed in all varieties of locals; commercial, residential, and municipal. Analog Devices offers solutions for access control with industry leading performance, advanced integration and low power consumption profiles. From intrusion detection systems to advanced biometric and video entry systems, ADI offers leading technology and products for Access Control applications.
The ADP5090 is an integrated boost regulator that converts dc power from PV cells or TEGs. The device charges storage elements such as rechargeable Li-Ion batteries, thin film batteries, super capacitors, and conventional capacitors, and powers up small electronic devices and battery-free systems.
The ADP5090 provides efficient conversion of the harvested limited power from a 16 µW to 200 mW range with sub-µW operation losses. With the internal cold-start circuit, the regulator can start operating at an input voltage as low as 380 mV. After cold startup, the regulator is functional at an input voltage range of 80 mV to 3.3 V.
By sensing the input voltage at the VIN pin, the control loop keeps the input voltage ripple in a fixed range to maintain stable dc-to-dc boost conversion. The VIN OCV sensing and programmable regulation points of the input voltage allow extraction of the highest possible energy from the PV cell or TEG harvester. A programmable minimum operation threshold (MINOP) enables boost shutdown during a low light condition. In addition, the DIS_SW pin can temporarily shut down the boost regulator and is RF transmission friendly.
The charging control function of ADP5090 protects rechargeable energy storage, which is achieved by monitoring the battery voltage with programmable charging termination voltage and shutdown discharging voltage. In addition, a programmable PGOOD flag monitors the SYS voltage.
An optional primary cell battery can be connected and managed by an integrated power path management control block that automatically switches the power source from the energy harvester, rechargeable battery, and primary cell battery.
The ADP5090 is available in a 16-lead, 3 mm × 3 mm LFCSP package and is rated for a −40°C to +125°C junction temperature range.
- PV cell energy harvesting
- TEG energy harvesting
- Battery regulator powered by solar panel
- Industrial monitoring
- Self-powered wireless sensor devices
- Portable and wearable devices with energy harvesting
Security and Surveillance
- Access Control
The ADF7024 is an ultralow power, integrated transceiver for use in the license-free ISM bands at 433 MHz, 868 MHz, and 915 MHz. Its ease of use and high performance make it suitable for a wide variety of wireless applications. The ADF7024 is suitable for operation under the European ETSI EN300-220 regulation, the North American FCC Part 15 regulation, and other similar regulatory standards.
The ADF7024 can operate under a number of predefined radio profiles. For each radio profile, optimized register settings are provided for the ADF7024 radio. This ensures that the RF communication layer works seamlessly, allowing the user to concentrate on the protocol and system level design and prototyping. The radio profiles cover common data rate and modulation options. There are six radio profiles in total, as shown in Table 1.
For more detailed information, please see the data sheet and user guide.
- Wireless sensor networks (WSNs)
- Home and building automation
- Asset tracking
- Process and building control
- Industrial control
- Internet of Things (IoT)
RadioVerse: Concept to Creation at Lightspeed
Interactive Signal Chains
Technical Articles Page