ADM7160

• Full featured evaluation board for the AD5676R WLCSP
• On-board or external power supply
• On-board or external voltage reference
• Arduino^® Uno form-factor, mates with SDP-K1
• PC control via Analysis | Control | Evaluation (ACE) Software

The EVAL-AD5676RARDZ allows users to quickly prototype AD5676R circuits and reduce design time. The AD5676R operates from a single 2.7 V to 5.5 V supply. The AD5676R incorporates an internal 2.5 V reference to give a full-scale output voltage of 2.5 V or 5 V. An ADR4525 is also provided on-board as a 2.5V reference source. A different external reference voltage can be applied via the EXT_REF SMB connector or test pin if needed.

The EVAL-AD5676RARDZ interfaces to the USB port of a PC via a system demonstration platform board (SDP-K1 ). The Analysis | Control | Evaluation (ACE) software is available for download from the EVAL-AD5676RARDZ product page to use with the evaluation board to allow the user to program the AD5676R. A peripheral module interface (PMOD) connection is also available to allow the connection of microcontrollers to the evaluation board without the SDP-K1 board. When a microcontroller is used through the PMOD connection, the SDP-K1 board must be disconnected, and the user is unable to operate the ACE software.

The EVAL-AD5676RARDZ is compatible with the EVAL-SDP-CK1Z (SDP-K1), which should be purchased separately. A typical connection between the EVAL-AD5676RARDZ and the SDP-B controller board is shown in the user guide. For full details, see the AD5676R data sheet, which must be used in conjunction with the user guide when using the EVAL-AD5676RARDZ.

The AD-JUPITER-EBZ is a versatile software-defined platform based on Analog Devices ADRV9002 and Xilinx Zynq UltraScale+ MPSoC. The ADRV9002 is a new generation RF transceiver that has dual-channel transmitters, dual-channel receivers covering a frequency range of 30 MHz to 6 GHz. This device has a high-quality RF linearity performance and a set of advanced features like fast profiles switching, flexible power vs. performance configuration, fast frequency hopping, multi-chip synchronization, and digital pre-distortion (DPD) for narrow and wide band waveform.

The evaluation platform includes XCZU3EG processing device that has a wide range of interfaces, making the system capable of local processing or streaming to a remote host. It comes integrated in a self-contained ruggedized aluminum case, which gives flexibility in evaluating and prototyping across different environments.

APPLICATIONS

• Aerospace and Defense
• Communications
• Advanced Education

• Power supply rejection ratio (PSRR) performance: 54 dB at 100 kHz
• Ultralow noise independent of V_OUT
  • 3 μV rms, 0.1 Hz to 10 Hz
  • 9.5 μV rms, 0.1 Hz to 100 kHz
  • 9 μV rms, 10 Hz to 100 kHz
  • 17 μV rms, 10 Hz to 1 MHz
• Low dropout voltage: 150 mV at I_LOAD = 200 mA
• Maximum output current: 200 mA
• Input voltage range: 2.2 V to 5.5 V
• Low quiescent and shutdown current
• Initial accuracy: ±1%
• Accuracy over line, load, and temperature: −2.5% to +1.5%
• 5-lead TSOT package and 6-lead LFCSP package

The ADM7160 evaluation boards demonstrate the operation and functionality of the ADM7160 ultralow noise, 200 mA, linear regulator.

Simple device measurements such as line and load regulation, dropout voltage, and ground current can be demonstrated with only a single voltage supply, load resistors, and a voltmeter or an ammeter.

Complete specifications for the ADM7160 ultralow noise, 200 mA, linear regulator are available in the ADM7160 data sheet available from Analog Devices, Inc., and should be consulted in conjunction with this user guide when using the evaluation boards.

• 使用 6 V 墙式适配器和板载 LDO 电压稳压器可轻松实现电源连接。
• 十个交流耦合输出 SMA 连接器，带用于 HCSL 的输出端电极
• 两个单端交流耦合参考输入，也可用作差分交流耦合参考输入
• 一个单端交流耦合参考输入和一个单端直流耦合参考输入，可一起配置为差分交流耦合参考输入
• 引脚可编程，上电可配置性
• 状态 LED
• 使用 USB 连接进行 PC 控制
• 具有简单图形用户界面的、基于 Microsoft Windows 的评估软件

AD9546 评估板是一款紧凑易用的平台，用于评估 AD9546 的多输入、10 输出、双通道、数字时钟同步器的所有功能。AD9546 支持现有和新兴的国际电信联盟 (ITU) 标准，通过服务提供商分组网络，可交付频率、相位和时刻，这些分组网络包括 ITU-G.8262、ITU-T G.812、ITU-T G.813、ITU-T G.823、ITU-T G.824、ITU-T G.825 和ITU-T G.8273.2。

将 AD9546 的 10 个时钟输出同步为多达四个输入基准电压源中的任意一个。数字锁相环 (DPLL) 可减少与外部基准电压源相关的时序抖动。数字控制的环路和保持电路即使在所有参考输入失败时，仍可持续产生低抖动输出信号。AD9546 系统时钟由 52 MHz 晶振提供。或者，可以在 SMA 连接器上提供外部时钟信号（必须插入相关组件，才能启用此功能）。

应用

• 5G 时序传输高精度同步
• 全球定位系统 (GPS)、PTP (IEEE 1588) 和同步以太网 (SyncE) 抖动滤除和同步
• 光传送网络 (OTN)、同步数字体系 (SDH) 以及宏基站和小蜂窝基站。
• 小基站时钟（基带和射频）
• Stratum 2、Stratum 3e 和 Stratum 3 保持、去除信号抖动和相位瞬态控制
• JESD204B 支持模数转换器 (ADC) 和数模转换器 (DAC) 时钟
• 运营商级以太网

• 8个伪差分输入或16个单端输入
• 高达±13 V的可选输入电压范围
• 16个单端输出
• 高达±15 V输出
• 所有电源轨由树莓派供电

• 增益：+35 dB
• 433MHz ISM频带优化
• 50Ohm输入和输出阻抗匹配
• 过温监控
• 自动热关断和导通