Analog Devices,Inc.（简称ADI）不断扩充的线性低压差(LDO)稳压器产品均采用小型封装，具有出色的性能，并且提供热过载保护、安全限流等增值特性，关断模式还能大幅降低功耗。这些产品提供固定和可调输出电压，输出电流最高可达2.0 A，压差最低为80 mV。同时还提供方便易用的在线参数搜索工具，帮您选择最适合应用的LDO稳压器，确保实现最佳性能。
The ADP122/ADP123 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 300 mA of output current. The low 85 mV dropout voltage at a 300 mA load improves efficiency and allows operation over a wide input voltage range.
The low 170 μA of quiescent current at full load makes the ADP122 ideal
More
The ADP122/ADP123 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 300 mA of output current. The low 85 mV dropout voltage at a 300 mA load improves efficiency and allows operation over a wide input voltage range.
The low 170 μA of quiescent current at full load makes the ADP122 ideal
More
The ADP150 is an ultralow noise (9 μV), low dropout, linear
regulator that operates from 2.2 V to 5.5 V and provides up to
150 mA of output current. The low 105 mV dropout voltage at
150 mA load improves efficiency and allows operation over a
wide input voltage range.
Using an innovative circuit topology, the ADP150 achieves
ultralow noise performance without the necessity of
More
Powering FPGAs - Learn the Basics Learn about the special power requirements for FPGAs and the appropriate power products used to ensure trouble free operation.
Power Management Download Tools:
Excel-based tools that generate a power supply design with a schematic, bill of materials, and performance specifications. The basis for ADIsimPower.
Power Chains: Simplified power management signal chains
快速筛选 - Start by narrowing the list of product by key parameters:
Sort:
Click on the arrows beneath the parameter on which you would like to sort, ascending and descending order.
Add/Remove Parameters:
Click on the Add/Remove Parameters button. Select/deselect the checkbox of the parameter in the add/remove parameter pop up box. Click on "Update" for the table to redraw with new selection of parameters.
Filter:
Enter the desired value to filter parameter(s) by, and click the "Update Results" button to update the table display.
Reset Table:
Click "Reset Table" to clear all filters/sorts and restore table back to default view.
Quick Filters:
When applicable, select a quick filter with preset parameters filtered to narrow the results returned.
No Parts Returned:
Adjust the filters on your least critical selection parameters in order to broaden your search.
Linear Regulator ICs
Use Up or Down Arrows in Heading to Sort in Ascending or Descending Order
Narrow Results by Entering Values in Numeric Fields or by Pull Down Selections
* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing. ** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.
中文产品数据手册 Rev 0, 10/2009 (pdf 609kB)
