音频DAC
ADI公司提供种类齐全的音频数模转换器（DAC）适合许多应用场合。这些音频DAC具有多种优良的性能，所以非常适合汽车音频、DVD播放器和录音机、音频视频接收机、专业混音台和数字音效箱等各种应用。
产品选型表
所有设计工具
-
滤波器
Analog Filter Wizard 2.0
The Analog Filter Wizard™ helps you design a low-pass, high-pass, band-pass or band-stop filter with actual op amps. It then simulates the filter’s performance with these op amps in real time. You can ask the tool to optimize for power, noise, or voltage range, and it will pick op amps and passive components appropriately. Or you can adjust the components manually yourself.
-
光电二极管
Analog Photodiode Wizard
The photodiode web tool helps you select and design the best circuit for your application. To use the tool, enter the specifications of your light input, including intensity, spectral band, and the required signal bandwidth. These inputs will narrow down the available photodiode part numbers.
-
放大器工具
放大器工具
View all tools available for Analog Devices' Amplifiers products.
-
产品搜索
产品搜索
Search, compare and select products using our parametric selection tables.
-
ADIsimADC
ADIsimADC
The ADIsimADC tool is an aid to help in the selection of Analog to Digital Converterse (ADC's), perform evaluations and assist with troubleshooting. The tool uses typical data values to mathematically model the general behavior of the selected ADC. It allows a user to apply input signals, set encode (sample) rates and simulate FFT's on a selected ADC. It is useful for checking the SNR, SFDR, SINAD, THD, ENOB etc. of a selected ADC.
-
ADIsimDAC
ADIsimDAC
ADIsimDAC assists the user with finding Analog Devices' DACs and DAC Application Circuits. It takes user inputs along Typical Parametric Data to sort, select and suggest applicable DAC's, system components and circuit solutions.
-
ADC/DAC 工具
Amp 工具
View all tools available for Analog Devices' Data Converters products.
-
产品搜索
产品搜索
Search, compare and select products using our parametric selection tables.
-
ADIsimRF
ADIsimRF
ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded Gain, Noise Figure, IP3 and P1dB as well as total power consumption are calculated. The number of stages can be varied up to a maximum of 15. Additional stages can be inserted at any point in teh signal chain and individual stages can be temporarily disabled or deleted. The calculator can be switched between Transmit Mode and Receive Mode where calculations are presented output-referred and input-referred respectively.
-
ADIsimPLL
ADIsimPLL
The ADIsimPLL design tool is a comprehensive and easy-to-use PLL synthesizer design and simulation tool. All key non-linear effects that can impact PLL performance can be simulated, including phase noise, Fractional-N spurs, and anti-backlash pulse. ADIsimPLL design tool eliminates time-consuming iterations from the PLL/synthesizer development process.
-
RF 工具
RF 工具
View all tools available for Analog Devices' RF ICs.
-
产品搜索
产品搜索
Search, compare and select products using our parametric selection tables.
-
ADIsimPower
ADIsimPower
ADIsimPower™ Voltage Regulator Design Tool produces custom DC-DC converter designs in about one minute. The user enters 5 inputs and chooses to optimize for efficiency, PCB space, cost, or part count. Output is a complete schematic, BOM, efficiency plot, and performance summary. A PDF summary and a blank PCB is offered for each design to facilitate fast prototyping to verify the design.
-
数字电源管理
数字电源管理
ADI's digital PWM (pulse-width modulation) power control and management devices provide designers with a highly integrated circuit architecture and the flexibility to configure system power-supply parameters in a matter of minutes using an intuitive GUI (graphical user interface). Power design egnineers with no prior programming experience can use the GUI to monitor and quickly adjust power functions such as frequency, timing, voltage settings, and protection limits.
-
电源工具
电源工具
View all tools available for Analog Devices' Power Management products.
-
产品搜索
产品搜索
Search, compare and select products using our parametric selection tables.
Audio D/A Converters
| Part# | # DAC | DAC DNR (dB) | DAC THD+N @ 1 kHz (-3dB) | Max Sampling Rate | Voltage Supply (V) | Resolution (Bits) | Features | DAC Architecture | Automotive Qualified | Package | US Price 1000-4999 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AD1851 | 1 | 96dB | -90dB | 48KHz | 5V | 16bit | single ended configurable current or voltage output | R-2R | - | - |
$ |
| AD1852 | 2 | 114dB | -105dB | 192KHz | 5V | 24bit | Differential voltage output | Sigma Delta | - | - |
$ |
| AD1856 | 1 | - | - | 48KHz | 12V | 16bit | single-ended, voltage output | - | - | SOIC |
$ |
| AD1859 | 2 | 94dB | -88dB | 48KHz | 5V | 18bit | single ended voltage output | Sigma Delta | - | - | ** |
| AD1866 | 2 | 90dB | -86dB | 48KHz | 5V | 16bit | single ended voltage output | R-2R | - | - |
$ |
| AD1933 | 8 | 112dB | -96dB | 192KHz | 5V | 24bit | Diff Vout, On-board LDO produces 3.3V from 5V | Sigma Delta | Yes | LQFP |
$ |
| AD1934 | 8 | 108dB | -92dB | 192KHz | 3.3V | 24bit | Single Ended voltage Output | Sigma Delta | Yes | LQFP |
$ |
| AD1953 | 3 | 96dB | -96dB | 48KHz | 5V | 24bit | Differential voltage output, SigmaDSP | Sigma Delta | - | LQFP |
$ |
| AD1955 | 2 | 123dB | 110dB | 192KHz | 5V | 24bit | SACD Playback, Differential Current Output | Sigma Delta | - | - |
$ |
| ADAU1772 | 2 | 107dB | -90dB | 192KHz | - | 24bit | - | - | - | LFCSP |
$ |
