数据转换知识资源

了解有关数据转换功能各个方面的技术基础知识和设计考虑。选择下面的信号链主题即可访问相关的学习资料。


数据转换和数据采样系统
了解量化、采样理论、奈奎斯特准则、欠采样和过采样效应及其它系统知识。
ADC架构
了解逐次逼近、Σ-Δ、Flash、折叠及其它架构。
DAC架构
了解插值、分段、二进制、串及其它架构。
电源
了解线性与开关电源、电源抑制比、电源噪声分析及其它相关知识。
基准电压源
了解串联和并联基准电压源、带隙架构、绝对精度、温度漂移、噪声及其它相关知识。
DAC滤波
了解过采样、抗混叠滤波器、插值技术及其它相关知识。
ADC噪声分析和滤波
了解噪声系数、信噪比(SNR)、信纳比(SINAD)、有效位数(ENOB)、输入滤波器设计及其它相关知识。
ADC驱动
了解差分与单端信号、谐振接口、变压器耦合及驱动放大器。
ADC时钟
了解相位噪声、时间抖动、多时钟边沿管理、时钟端接及其它相关知识。
接地和PCB布局布线
了解模拟与数字接地、星形单点接地技术、地阻抗、低频和高频去耦及其它相关知识。
设计工具
了解并访问用于ADC、DAC、时钟等的仿真工具。
测试与评估技术
了解交流和直流规格、测试技术、硬件测试配置、FIFO评估套件的使用及其它相关知识。
应用
了解通信中的中频采样、电机控制、PLC/DCS过程控制及其它相关应用。
数字I/O
了解LVDS驱动器和接收器、受控阻抗传输线路技术、端点和信号源端接、阻尼电阻及其它相关知识。
控制
了解SPI和I2C 控制接口协议、数字隔离及其它相关知识。
DAC模拟输出
了解DAC输出缓冲、输出顺从电压范围、电流与电压输出及其它相关知识。
DAC时钟
了解相位噪声、时间抖动、CMOS DAC中的建立和保持时间测量、时钟端接及其它相关知识。
选型指南/手册
ADC、ADC驱动器、DAC、数字电位计等的选型指南。
ADC基础知识
了解传递函数、积分非线性、微分非线性、孔径不确定性、频域响应、吞吐延迟及其它相关知识。
DAC基础知识
了解基本传递函数、积分非线性、微分非线性、混叠镜像、毛刺、sinX/X响应及其它相关知识。

查看最近新增的内容:

Data Conversion and Sampled Data Systems
Learn about quantization, sampling theory, Nyquist criteria, undersampling and oversampling effects, and more.
ADC Architectures
Learn about successive approximation, sigma-delta, flash, folding, and more.
DAC Architectures
Learn about Interpolating, segmented, binary, string, and more.
Power Supplies
Learn about linear vs. switching supplies, power supply rejection ratio, power supply noise analysis, and more.
Voltage References
Learn about series vs. shunt references, bandgap architecture, absolute accuracy, temperature drift, noise, and more.
Filtering DACs
Learn about oversampling, anti-aliasing filters, interpolation techniques, and more.
ADC Noise Analysis and Filtering
Learn about noise figure, SNR, Sinad, ENOB, input filter design, and more.
Driving ADCs
Learn about differential vs. single-ended signaling, resonant interfacing, transformer coupling, and driver amplifiers.
Clocking ADCs
Learn about phase noise, time jitter, managing multiple clocking edges, clock termination, and more.
Grounding & PCB Layout
Learn about analog vs. digital ground, star point grounding techniques, ground impedance, low and high frequency decoupling, and more.
Design Tools
Learn about and access simulation tools for ADCs, DACs, clocks, and more.
Test & Evaluation Techniques
Learn about AC and DC specifications and test techniques, hardware test configurations, using FIFO evaluation kits, and more.
Applications
Learn about IF sampling in communications, motor control, PLC/DCS process control, and more.
Data I/O
Learn about LVDS drivers and receivers, JESD204 serial interface, controlled-impedance transmission line techniques, end and source termination, seamless FPGA connectivity resources, and more.
Control
Learn about SPI and I2C control interface protocol, digital isolation, and more.
DAC Analog Outputs
Learn about buffering DAC outputs, output compliance range, current vs. voltage outputs, and more.
Clocking DACs
Learn about phase noise, time jitter, setup and hold measurements in CMOS DACs, clock termination, and more.
Selection Guides/Brochures
Selection guides for ADCs, ADC drivers, DACs, digital potentiometers, and more.
ADC Fundamentals
Learn about the transfer function, integral non-linearity, differential non-linearity, aperture uncertainty, frequency domain response, thoughput delay, and more.
DAC Fundamentals
Learn about the basic transfer function, integral linearity, differenital linearity, aliased images, glitch, sinX/X response, and more.
提供意见反馈 X
content here.
content here.

提供意见反馈

关闭