Процессор Blackfin с флэш-памятью исполняемых программ и набором периферийных модулей, оптимизированных для промышленных и общих применений
Manufactured by:

Подробнее о продукте

В рамках серии BF50x семейства процессоров Blackfin процессор BF504F занимает более высокое положение относительно BF504 с точки зрения стоимости и функциональных возможностей благодаря интеграции флэш-памяти исполняемых программ объемом 4 Мбайт. Эта особенность в комбинации с тактовой частотой ядра 400 МГц и набором периферийных модулей, включающим в себя два трехфазных генератора ШИМ, модуль управления АЦП, два порта SPI, два порта SPORT, контроллер CAN, порт PPI, восемь универсальных счетчиков и интерфейс съемных носителей информации, позволяют BF504F обеспечивать оптимальное соотношение цены и функциональных возможностей в промышленных системах и системах общего назначения с интенсивными вычислениями, для работы которых достаточно 68 кбайт памяти L1 и 4 Мбайт флэш-памяти программ. Процессор BF504F выпускается в недорогом корпусе LFCSP, имеющем габариты 12x12мм, в вариантах с промышленным и коммерческим рабочими температурными диапазонами и тактовыми частотами 300 и 400 МГц.

Статус продукта

checked Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits

X +


Product Details

Analog Devices’ cost-effective Universal Serial Bus (USB)-based emulator and High performance (HP) Universal Serial Bus (USB)-based emulator each provide an easy, portable, non-intrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. These powerful USB-based emulators perform a wide range of emulation functions, including single-step and full speed execution with pre-defined breakpoints, and viewing and/or altering of register and memory contents. With the ability to automatically detect and support multiple I/O voltages, the USB and HP USB emulators enable users to communicate with all of the Analog Devices JTAG processors and DSPs using either a full speed USB 1.1 or high speed USB 2.0 port on the host PC. Applications and data can easily and rapidly be tested and transferred between the emulators and the separately available VisualDSP++ development and debugging environment(sold separately).

The plug-and-play architecture of USB allows the emulators to be automatically detected and configured by the host operating system. It can also be connected to and disconnected from the host without opening the PC or turning off the power to the PC. A 3-meter cable is included to connect the emulators to the host PC, thus providing abundant accessibility to hard to reach targets.

The HP USB-based emulator also supports the Background Telemetry Channel (BTC), a non-intrusive method for exchanging data between the host and target application without affecting the target system's real-time characteristics.

Part Number:
USB-Based Emulator
Part Number: ADZS-USB-ICE
High Performance USB-Based Emulator

Tools Support:
Tel: 1-800-ANALOGD (262-5643)
Contact Support

For additional information, contact your local Analog Devices Sales Office or Distributor.

EVAL-BF506F-EZKIT Circuit Diagram

Product Details

The ADSP-BF506F EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-BF504/F and BF506F Blackfin® Processors via a USB-based, PC-hosted tool set. With this EZ-KIT Lite, users can learn more about the Analog Devices (ADI) ADSP-BF506F hardware and software development, and quickly prototype a wide range of applications. 

The EZ-KIT Lite includes an ADSP-BF506F Blackfin Processor desktop evaluation board along with an evaluation suite of the VisualDSP++® development and debugging environment, including the C/C++ compiler, assembler, and linker. The evaluation suite of VisualDSP++ is designed to be used with the EZ-KIT Lite only.

Ordering Information:
Part number: ADZS-BF506F-EZLITE

CROSSCORE® Tools Support:
Tel: 1-800-ANALOGD (262-5643)
Contact Support


X +

Software & Systems Requirements


Software Development Tools

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADSP-BF504F Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Sample & Buy

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.