Прецизионный двухосевой цифровой инклинометр и акселерометр
Manufactured by:

Подробнее о продукте

ADIS16209 – это прецизионный цифровой инклинометр, который способен производить измерения по одной (диапазон ±180°) или двум (диапазон ±90°) осям. Стандартное напряжение питания (3.3 В) и последовательный периферийный интерфейс (SPI) упрощают интеграцию компонента в большинство промышленных систем. Простая структура внутренних регистров обеспечивает доступ ко всем выходным данным и настройкам конфигурации. Через внутренние регистры пользователю доступны следующие выходные данные: откалиброванные значения ускорения, точные значения углов отклонения, напряжение питания, внутренняя температура, значения вспомогательных аналоговых и цифровых входных сигналов, диагностические флаги ошибок и программируемые флаги тревоги.

Набор конфигурируемых параметров включает в себя частоту дискретизации, настройки управления питанием, параметры цифровой фильтрации, параметры вспомогательных аналоговых и цифровых выходных сигналов, а также режимы регулировки нуля/смещения и самотестирования механической структуры.

ADIS16209 выпускается в корпусе LGA, который имеет габариты 9.2 мм × 9.2 мм × 3.9 мм и рабочий температурный диапазон от −40°C до +125°C. Монтаж корпуса может производиться при помощи стандартных технологий бессвинцовой пайки методом оплавления припоя.

Области применения

  • Управление, стабилизация и выравнивание платформ
  • Измерение отклонения, инклинометры, нивелирование
  • Измерение положения/параметров движения
  • Устройства контроля и сигнализации (охранные, медицинские системы и системы безопасности)
  • Навигация

Статус продукта

checked Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits

X +

ADIS16209/PCBZ Circuit Diagram

Product Details

The ADIS16209/PCBZ is a "breakout boad that provides (1) ADIS16209CCCZ and (1) interface PCB to simplify the process of "prototyping" during the early stages of system design and evaluation. The ADIS16209CCCZis a fully-calibrated, digital MEMS inclinometer, which provides a serial peripheral interface (SPI) for all digital communications. It is in a 16-lead, LGA package that minimizes board space but does not support typical prototype soldering processes. The interface PCB provides access to the ADIS16209CCCZ, using dual-row, 12-pin connectors, which supports standard ribbon cable systems and hand-soldering connection techniques.

EVAL-ADIS Circuit Diagram

Product Details

The EVAL-ADIS system provides a simple, PC-based tool, for evaluating iSensor products, for those who are not ready to integrate them into embedded processor systems. This system supports application software that enable basic demonstration, individual register access and high-speed data capture for each supported device. Each application software package comes with an installation wizard, which facilitates simple installation and also includes a simple USB-driver package that is easy to use. All software packages associated with the EVAL-ADIS are compatible with Windows XP, Vista and 7 and provides both 32-bit and 64-bit USB drivers. The EVAL-ADIS circuit board is 0.125” thick, which enables pre-drilled, pre-tapped mounting holes for each iSensor device. The mounting holes accommodate M2x0.4mm machine screws. This kit also includes 5 sets of M2x0.4 machines screws, which provide for the various package thickness and eliminate the need to procure additional hardware. The integrated power system eliminates the need for external power supplies in most cases, but does provide for an external power supply input, for supply-sensitivity testing. The power system uses the USB’s +5V and provides a linear regulator option for +3.3V devices.

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADIS16209 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints



Didn't find what you were looking for?

Sample & Buy

Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

Price Table Help

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.