ADM3054

Быстродействующий приемопередатчик CAN с изоляцией сигнальных линий и защитой шины
Manufactured by:

Подробнее о продукте

ADM3054 - это изолированный приемопередатчик физического уровня интерфейса CAN (controller area network) с изоляцией сигнальных линий, который выдерживает напряжение до 5 кВ ср.кв.. ADM3054 соответствует стандарту ISO 11898.

Данный компонент реализован по технологии iCoupler®, позволившей совместить трехканальный изолятор и приемопередатчик интерфейса CAN в одном корпусе. Сторона компонента, подключаемая к логическим схемам, работает от напряжения питания 3.3 В или 5 В на выводе VDD1, а сторона, подключаемая к шине – от напряжения питания 5 В на выводе VDD2. Интегрированный сигнал VDD2SENSE позволяет обнаруживать потерю напряжения питания на стороне шины (VDD2).

ADM3054 обеспечивает изолированный интерфейс между контроллером протокола CAN и шиной физического уровня. Он поддерживает работу со скоростями передачи данных до 1 Мбит/с.

Компонент имеет интегрированную защиту на выводах шины CANH и CANL от коротких замыканий на питание/землю в системах с напряжением питания 24 В.

Компонент имеет функции ограничения тока и отключения при перегреве для защиты от коротких замыканий по выходу и ситуаций с возможным закорачиванием шины на выводы земли или питания. Он работает в промышленном температурном диапазоне и выпускается в 16-выводном широком корпусе SOIC.

ОБЛАСТИ ПРИМЕНЕНИЯ

  • Шины данных CAN
  • Промышленные сети

Статус продукта

checked Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits

X +

EVAL-ADM3054 Circuit Diagram

Product Details

The EVAL-ADM3054EBZ allows quick and easy evaluation of the ADM3054 isolated CAN transceiver. The evaluation board allows all of the input and output functions to be exercised without the need for external components. Screw terminal blocks provide convenient connections for logic signals and power. The main device on the evaluation board, the ADM3054, is a controller area network (CAN) physical layer transceiver with integrated digital isolation, allowing a protocol layer CAN controller to access the physical layer bus. The ADM3054 complies with the ISO 11898 standard. It is capable of running at data rates of up to 1 Mbps. The evaluation board has separate ground and power planes for the logic side and the bus side. This allows evaluation of the isolation capability of the ADM3054, which employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator and a CAN transceiver into a single, 16-lead wide body SOIC package. The power is isolated between a single 3.3 V or 5 V supply on VDD1, the logic side, and a single 5 V supply provided on VDD2, the bus side. Loss of power on the bus side (VDD2) can be detected by an integrated VDD2SENSE signal.

Product Details

The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-isolated communication standards (USB, RS-422, RS-485, RS-232, CAN, SPI, I2C, and LVDS). The Blackfin® ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards. The interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler® and isoPower® digital isolator technology.

,

The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-

Tools & Simulations

X +

Reference Materials

X +

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADM3054 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Discussions

X+

Didn't find what you were looking for?

Sample & Buy

X+
Back
Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 
Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.