New Products for Аудио/видео микросхемы | Analog Devices

ADDI9020, 60 MHz CCD Signal Processor with V-Driver and Precision Timing Generator

Thu, 07 Feb 2013 14:34:57 GMT

The ADDI9020 is a complete 60 MHz front-end solution for digital still cameras and other charge-coupled device (CCD) imaging applications. The ADDI9020 includes the analog front end (AFE), a fully programmable timing generator (TG), and a 12-channel V-driver. A Precision Timing® core allows adjustment of high speed clocks with approximately 260 ps resolution at 60

ADAU7002, Stereo PDM to I²S or TDM Conversion IC

Wed, 30 Jan 2013 14:19:54 GMT

The ADAU7002 converts a stereo PDM bit stream into a PCM output. The source for the PDM data can be two microphones or other PDM sources. The PCM audio data is output on a serial audio interface port in either I2S or TDM format.

The ADAU7002 is specified over the commercial temperature range (−40°C to +85°C). It is available in a halide-free, 8-ball, 1.56 mm × 0.76 mm, wafer level chip

ADV7610, Low Power, 165 MHz HDMI Receiver

Fri, 11 Jan 2013 16:09:09 GMT

The ADV7610 is offered in professional (no HDCP) and industrial versions. The operating temperature range is −40°C to +85°C.

The ADV7610 is a high quality, single input HDMI-capable receiver. It incorporates an HDMI-capable receiver that supports all mandatory 3D TV defined in HDMI specification. The ADV7610 supports formats up to UXGA 60 Hz at eight bits.

It integrates a CEC

ADAU1977, Quad ADC with Diagnostics

Wed, 09 Jan 2013 18:57:27 GMT

The ADAU1977 incorporates four high performance analog-todigital converters (ADCs) with direct-coupled inputs capable of 10 V rms. The ADC uses multibit sigma-delta (Σ-Δ) architecture with continuous time front end for low EMI. The ADCs can be connected to the electret microphone (ECM) directly and provide the bias for powering the microphone. Built-in diagnostic circuitry detects faults on input

ADV7182, 10-Bit, SDTV Video Decoder with Differential Inputs

Mon, 07 Jan 2013 17:37:51 GMT

The ADV7182 automatically detects and converts standard analog baseband video signals compatible with worldwide NTSC, PAL, and SECAM standards into a 4:2:2 component video data stream. This video data stream is compatible with the 8-bit ITU-R BT.656 interface standard.