Добавить к Мастеру создания структурных схем

SSM2301:  Filterless High Efficiency Mono 1.4 W Class-D Audio Amplifier

Информация о продукте

Новые альтернативные решения: NEW DESIGNS:
SSM2305 Filterless High Efficiency Mono 2.8 W Class-D Audio Amplifier

The SSM2301 is a fully integrated, high efficiency, Class-D audio amplifier designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 1.4 W of continuous output power with less than 1% THD + N driving an 8 Ω load from a 5.0 V supply.

The SSM2301 features a high efficiency, low noise modulation scheme that does not require external LC output filters. The modu-lation provides high efficiency even at low output power. The SSM2301 operates with 85% efficiency at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is greater than 98 dB. Spread-spectrum modulation is used to provide lower EMI-radiated emissions compared with other Class-D architectures.

The SSM2301 has a micropower shutdown mode with a maximum shutdown current of 30 nA. Shutdown is enabled by applying a logic low to the SD pin.

The device also includes pop-and-click suppression circuitry. This minimizes voltage glitches at the output during turn-on and turn-off, thus reducing audible noise on activation and deactivation.

The fully differential input of the SSM2301 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.

The SSM2301 also has excellent rejection of power supply noise, including noise caused by GSM transmission bursts and RF rectification. PSRR is typically 63 dB at 217 Hz.

The gain can be set to 6 dB or 12 dB by utilizing the gain control select pin connected respectively to ground or to VDD. Gain can also be adjusted externally by inserting a resistor in series with each input pin.

The SSM2301 is specified over the commercial temperature range (−40°C to +85°C). It has built-in thermal shutdown and output short-circuit protection. It is available in both an 8-lead, 3 mm × 3 mm lead-frame chip scale package (LFCSP) and an 8-lead MSOP package.

Applications

  • Mobile phones
  • MP3 players
  • Portable gaming
  • Portable electronics
  • Educational toys
  • Data Sheet, Rev. A, 10/07

    ОСОБЕННОСТИ И ПРЕИМУЩЕСТВА

    • Filterless Class-D amplifier with Σ-Δ modulation
    • No sync necessary when using multiple Class-D amplifiers from Analog Devices, Inc.
    • 1.4 W into 8 Ω at 5.0 V supply with less than 1% THD + N
    • 85% efficiency at 5.0 V, 1.4 W into 8 Ω speaker
    • Greater than 98 dB SNR (signal-to-noise ratio)
    • Single-supply operation from 2.5 V to 5.0 V
    • 20 nA ultralow shutdown current
    • Short-circuit and thermal protection
    • Available in 8-lead, 3 mm × 3 mm LFCSP and MSOP packages
    • Pop-and-click suppression
    • Built-in resistors reduce board component count
    • Fixed and user-adjustable gain configurations

    Functional Block Diagram for SSM2301

    Документация

    Наименование Тип контента Тип файлов
    SSM2301: Filterless High Efficiency Mono 1.4 W Class-D Audio Amplifier Data Sheet (Rev A, 10/2007) (pdf, 423 kB) Технические описания PDF
    AN-938: Digital and Analog Measurement Units for Digital CMOS Microphone Preamplifier ASICs  (pdf, 75 kB) Статьи по применению PDF
    Class D Audio Amplifiers: What, Why, and How
    (Planet Analog, 2/1/2007)
    Технические статьи HTML
    Analog Devices Introduces Class-D Audio Amplifiers
    (EFY Times, 8/10/2006)
    Обзоры продукции HTML
    We measure portable performance in µA and MHz. In handheld designs, analog is everywhere. Обзор HTML
    ICs for Enhanced Handset User Experience Обзор HTML
    Babies, bouquets, and big events - courtesy of Analog ICs. Обзор HTML
    RAQs index Rarely Asked Questions HTML
    Словарь терминов Глоссарий HTML

    Оценочные наборы, обозначения компонентов и шаблоны посадочных мест на ПП

    Оценочные платы и наборыОзнакомьтесь с документацией и условиями покупки

    Обозначения и посадочные места— Analog Devices предлагает библиотеку обозначений для принципиальных схем и шаблонов посадочных мест для разводки плат, совместимую с большинством САПР.

    SampleОбразцы / Покупка

    Цены, исполнение ИМС, наличие на складе

    SSM2301 Model Options
    Помощь

    Приведенные цены действительны в США и указаны только для примерного бюджетного рассчета. Цены указаны в долларах США (за штуку в указанном размере партии) и могут быть изменены. Цены в других регионах могут отличаться в зависимости от местных пошлин, налогов, сборов и курсов валют. Для уточнения стоимости обращайтесь в местные офисы продаж Analog Devices, или к официальным дистрибьюторам. Цены на оценочные платы и наборы указаны за штуку независимо от количества.

    Модели Описание Цена Без использования свинца PCN/PDN Проверка наличия/
    Покупка/Запрос образца
    SSM2301-EVALZ Статус: Obsolete Evaluation Board $ 0,00 Да - Контакты
    SSM2301-MINI-EVALZ Статус: Prodn Evaluation Board $ 50,50 Да -

    Цены указаны за одну штуку, в долларах США, на условиях ФОБ. Являются рекомендованными розничными ценами в США, приведены только для примерного расчета и могут меняться. Международные цены могут отличаться на величину местных пошлин, налогов, сборов и курсов валют.

    Проверка наличия и приобретение

    Просмотр списка дистрибьюторов и офисов продаж
    Review this Product X
    content here.
    content here.

    Review this Product

    Закрыть