Training, Tutorials & Seminars

ALL WEBCASTS — IMAGING

 
To filter this listing by product category or application, or both, visit the Training, Tutorials & Seminars Page.
Webcasts (10)
  • Partitioning and Design for Precision Data Acquisition Systems

    Partitioning and Design for Precision Data Acquisition Systems

    Acquired analog signals can be manipulated and processed by either the analog or digital portions of a system, for example, through filtering, multiplexing, and gain control. The analog portions of a system can typically provide reasonably simple processing at fairly low cost, power, and overhead. Digital processing can provide far greater analysis power and can alter the nature of the analysis without changing hardware.

    Presenter
    Dave Kress
    Director of Technical Marketing
    Analog Devices, Inc.
  • Healthcare Webcast: Optimizing Ultrasound Systems using Integrated Receivers

    Healthcare Webcast: Optimizing Ultrasound Systems using Integrated Receivers

    In this webcast TGC noise analysis techniques will be presented to aid designers in determining receiver noise contributions in near and far field B mode imagining. The key IC performance specifications that determine PW Doppler mode sensitivity will also be discussed, as will analysis of the CW Doppler signal path critical noise sources and suggested filtering techniques will be presented.

    Presenter
    Gina Kelso
    Healthcare Applications Engineer
    Analog Devices
  • Healthcare Webcast: Fundamentals of ADC Technologies for Healthcare Design

    Healthcare Webcast: Fundamentals of ADC Technologies for Healthcare Design

    This session will explain the main ADC architectures in use today, and their advantages and disadvantages for different medical and healthcare applications such as ECG, diagnostics and ultrasound. It will present the latest developments in: Successive approximation, Sigma delta, Pipelined architectures, Design guidance on clocking, grounding, shielding and other techniques to get the best performance from the device will be presented.

    Presenter
    Tom O’Dwyer
    Healthcare Technology Director
    Analog Devices
  • Healthcare Webcast: MEMS Inertial Sensors in Healthcare Designs

    Healthcare Webcast: MEMS Inertial Sensors in Healthcare Designs

    In this webcast you will learn the basics on MEMS motion sensing including architectures and technology including accelerometers, gyroscopes, and IMUs. Applications explored include precise positioning/tracking of healthcare scanning equipment, surgical tool guidance, balance and control of prosthetics, and motion sensing.

    Presenter
    Bob Scannell
    MEMS Inertial Sensors Business Development Manager
    Analog Devices
  • Healthcare Webcast: Simplifying Point-of-Care Patient Monitor Design Using ECG AFE

    Healthcare Webcast: Simplifying Point-of-Care Patient Monitor Design Using ECG AFE

    (Premieres June 15th at Noon ET.) This webcast will introduce an ECG Analog Front End (AFE) which integrates the functional blocks traditionally designed into an ECG system using discrete components, as well as respiration measurement and pace pulse detection. We will look at how this device addresses some of the main ECG design challenges including critical system level requirements.

    Presenter
    Tony Zarola
    Healthcare Segment Manager
    Analog Devices
  • Healthcare Webcast: Solving Medical Equipment Signal Path Design Challenges

    Healthcare Webcast: Solving Medical Equipment Signal Path Design Challenges

    Medical devices and instruments are trending toward lower power and smaller form factors, yet they must deliver high performance and accuracy, sometimes in very harsh environments. In this webcast we're going to learn how analog and mixed signal components can help enable system designers to meet those stringent objectives.

    Presenter
    Chris Hyde
    Senior Field Applications Engineer
    Analog Devices
  • WEBCAST: Noise Optimization in Sensor Signal Conditioning Circuits (Part I)

    WEBCAST: Noise Optimization in Sensor Signal Conditioning Circuits (Part I)

    This first part of a two-part series will explore the noise topic in detail and provide tips and answers to these types of questions.

    Presenter
    Reza Moghimi
    Applications Engineering Manager
    Analog Devices
  • WEBCAST: Noise Optimization in Sensor Signal Conditioning Circuits (Part II)

    WEBCAST: Noise Optimization in Sensor Signal Conditioning Circuits (Part II)

    This is the second part of a two-part series that explores the topic of signal noise in detail.

    Presenter
    Reza Moghimi
    Applications Engineering Manager
    Analog Devices
  • Webcast: Noise Optimization in Sensor Signal Conditioning Circuits, Part III

    Webcast: Noise Optimization in Sensor Signal Conditioning Circuits, Part III

    Expanding upon the material previously presented in "Optimizing Noise in the Sensor Signal Path" Parts I & II, this Webcast addresses some of the specific questions and areas of additional interest, raised by viewers.

    Presenter
    Reza Moghimi
    Applications Engineering Mgr
    Analog Devices
  • Webcast: Design Considerations for Multi-Channel ADCs

    Webcast: Design Considerations for Multi-Channel ADCs

    Our ADC expert will explore the important design considerations of multi-channel ADCs, both pro and con. Some tradeoffs of utilizing ADCs with additional on-chip functionality will also be discussed.

    Presenter
    Pam Aparo
    Marketing Manager
    Analog Devices
沪ICP备09046653号
Send Feedback X
content here.
content here.

Send Feedback

Close