- MT-208: Digitally Programmed State Variable Filter (pdf, 160 kB)
PLC Level Sensor Demo
ADI demonstrates a multi-channel Industrial Process Control Evaluation system, which can be used in a variety of industrial applications such as PLC/DCS and Transmitter designs.
Partitioning and Design for Precision Data Acquisition Systems
Acquired analog signals can be manipulated and processed by either the analog or digital portions of a system, for example, through filtering, multiplexing, and gain control. The analog portions of a system can typically provide reasonably simple processing at fairly low cost, power, and overhead. Digital processing can provide far greater analysis power and can alter the nature of the analysis without changing hardware.
Design Techniques for reducing power consumption and harmful thermal events in industrial designs
This webcast will present: typical analog module configuration and show how to calculate the maximum ambient temperature that the system can tolerate, new technology to reduce the power dissipated in the module (regardless of what output load is connected), then look at the performance of these devices when the supply is run from a switching regulator rather than with a linear regulator.
Design Considerations for Industrial Instrumentation and Process Control Systems
Included in this wide-ranging webcast are Industrial challenges and solutions, including sensor & conditioning options, dealing with noice and common-mode voltage, and communications.
Designing Programmable Logic Controller 4-20mA and Voltage I/O modules
An intensive course in Industrial Process Control (including PLC modules and key specs, input and output module architectures) Field Transmitters (loop powered vs. non-loop) and an introduction to PLC reference design.