-
Products
- Amplifiers and Comparators
- Analog Microcontrollers
- Analog to Digital Converters
- Audio/Video Products
- Broadband Products
- Clock and Timing
- Digital to Analog Converters
- Embedded Processing and DSP
- Fiber/Optic
- Interface
- MEMS
- Power Management
- References
- RF/IF Components
- Sensors
- Switches/Multiplexers
- Temperature Sensing and Thermal Management
- Other Products
- Analog/HDMI/DVI Interfaces
- Audio A/D Converters
- Audio Amplifiers
- Audio CODECs
- Audio D/A Converters
- Audio Signal Processors
- Camera/Camcorder Analog Front Ends
- Display Driver Electronics
- iMEMS® Microphone
- Lens Driver Components
- Mobile TV Tuners
- Sample Rate Converters
- Video Amps/Buffers/Filters
- Video CODECs
- Video Compression
- Video Decoders
- Video Encoders
OTHERS WAYS
TO FIND PRODUCTSSelection Guides Product Selection Tables - Resources & Tools
-
About ADI
- My Analog
Laser Drivers
- AN-705: 05: ADN8830-EVAL TEC Controller Instructions (pdf, 212 kB)
- AN-695: Using the ADN8831 TEC Controller Evaluation Board (Rev. B, 9/2007) (pdf, 695 kB)
- AN-658: Optical Channel Identification on the ADN284x Laser Drivers (Part I) (pdf, 234 kB)
-
AN-654: Optical Module Development Platform 2.5 Gbps Transmitter with Digital Diagnostics
(pdf, 387 kB)
The SFP Digital Diagnostics Development Board is a platform designed to enable optical module designers to develop SFP and SFF compliant transceivers with digital diagnostics. -
AN-638: ADN2847 AC-Coupled Optical Evaluation Kit
(pdf, 451 kB)
This application note describes the 32-lead ADN2847 laser diode driver Rev. A1 evaluation kit. The evaluation kit is a demonstration board that provides ac -coupled opti - cal evaluation of the ADN2847. This document describes how to configure the board to operate these parts optically. -
AN-637: ADN2848 AC-Coupled Optical Evaluation Kit
(pdf, 384 kB)
This application note describes the 32-lead ADN2848 laser diode driver Rev.A1 evaluation kit. The evaluation kit is a demonstration board that provides ac-coupled optical evaluation of the ADN2848. This document describes how to configure the board in order to operate this part optically. - AN-634: Using the ADN2830 Evaluation Board (pdf, 936 kB)
-
AN-631: ADN2841/ADN2847 DC-Coupled Optical Evaluation Kit
(pdf, 596 kB)
This application note describes the 32-lead ADN2841/ADN2847 laser diode driver Rev. A1 evaluation kit. The evaluation kit is a demonstration board that provides a dc-coupled optical evaluation of the ADN2841 or ADN2847. This document describes how to configure the board in order to operate these parts optically. -
AN-630: 0: ADN2841 Optical Evaluation Kit
(pdf, 461 kB)
This application note describes the ADN2841 laser diode driver Rev.E1 evaluation kit.The evaluation kit is a demonstration board that provides optical evaluation of the ADN2841. This document describes how to configure the board in order to operate the part optically. -
AN-629: ADN2841 Evaluation Kit
(pdf, 189 kB)
This application note describes the ADN2841 laser diode driver evaluation kit. The evaluation kit is a demonstration board that provides electrical evaluation of the ADN2841. This document describes how to configure the board in order to operate the part electrically. -
AN-619: Using the ADN8810 Demo Board (v2.0)
(pdf, 2229 kB)
... The ADN8810 is a 12-bit,high output current D/A converter that is controlled through a serial peripheral interface (SPI). The device can be used as a current source for tunable lasers or other precision high output current applications, like 4 –20 mA control loops.
