Application Notes (13)
-
AN-1186: Radiated Immunity Performance of the AD7192 in Weigh Scale Applications
(pdf, 461 kB)
- AD7192 EMC Gerber Files (zip, 245 kB)
-
AN-1187: Radiated Immunity Performance of the AD7780 in Weigh Scale Applications
(pdf, 465 kB)
- AD7780 EMC Gerber File (zip, 232 kB)
- AN-1182: Understanding and Optimizing the AFC Loop on the ADF7021 for Minimum Preamble (pdf, 224 kB)
- AN-1177: LVDS and M-LVDS Circuit Implementation Guide (pdf, 586 kB)
- AN-1161: EMC-Compliant RS-485 Communication Networks (pdf, 226 kB)
- AN-1126: More Boost with Less Stress: the SEPIC Multiplied Boost Converter (pdf, 330 kB)
- AN-1154: Optimizing Phase Noise and Spur Performance of the ADF4157 and ADF4158 PLLs Using Constant Negative Bleed (pdf, 105 kB)
- AN-1123: Controller Area Network (CAN) Implementation Guide (pdf, 204 kB)
- AN-1141: Powering a Dual Supply Precision ADC with Switching Regulators (pdf, 640 kB)
- AN-0986: Adjusting the Output Range and Span of the AD5362 (pdf, 79 kB)
- AN-892: Temperature Measurement Theory and Practical Techniques (pdf, 733 kB)
- AN-880: ADC Requirements for Temperature Measurement Systems (pdf, 423 kB)
- AN-534: Adding HART® Capability to the AD421, Loop-Powered 4 mA–20 mA DAC Using the 20C15 HART Modem (pdf, 49 kB)
Circuit Note (6)
-
CN0295:Flexible, 4 mA-to-20 mA Pressure Sensor Transmitter with Voltage or Current Drive
(pdf, 242 kB)
- CN0201: Complete 5 V, Single-Supply, 8-Channel Multiplexed Data Acquisition System with PGIA for Industrial Signal Levels (pdf, 263 kB)
- EMC Compliant RS-485 Transceiver Protection Circuits (pdf, 264 kB)
- CN0310: Precision 24-Bit, 250 kSPS Single-Supply Sigma-Delta ADC System for Industrial (pdf, 165 kB)
- CN0206: Complete Type T Thermocouple Measurement System with Cold Junction Compensation Rev. A (pdf, 252 kB)
- CN0247: 12-Bit ,1 MSPS SAR ADC and Driver with Total Power Dissipation Less than 5 mW (pdf, 175 kB)
Technical Articles (28)
- MS-2475: Power Limitations of Loop-Powered Smart Transmitters: How to Add More Intelligencewithin a Fixed Power Budget (pdf, 1511 kB)
- MS-2394: Seven Steps To Successful Ultralow Light Signal Conversion (pdf, 527 kB)
- MS-2400: Key Benefits of Input Overvoltage Protected Op Amps in Systems (pdf, 296 kB)
- NAppkin Note: Optimizing Power Conversion for Isolated Sensor Interfaces (pdf, 164 kB)
- MS-2411: Optimizing Power Conversion for Isolated Sensor Interfaces (pdf, 250 kB)
-
Designing Robust Isolated RS-232 Data Interfaces for Harsh Industrial Applications
(Analog Dialogue, Maurice O'Brien) - MS-2352: Reduce Size and Cost with Integrated Industrial Interface Digital Isolators (pdf, 223 kB)
- MS-2340: Digital Isolators Simplify Design and Ensure System Reliability (pdf, 245 kB)
- MS-2317: Designing High Performance Systems with Low Noise Instrumentation Amplifiers (pdf, 190 kB)
- MS-2318: Design Fundamentals of Implementing an Isolated Half-Bridge Gate Driver (pdf, 151 kB)
- MS2242: Reinforced Isolation in Data Couplers (pdf, 491 kB)
- How to Calculate the Controller Parameters for an Isolated CAN (Controller Area Network) Network to Run at 1 Mbps (pdf, 373 kB)
-
Using iCoupler® Digital Isolators for System Diagnostic Interfaces
(pdf, 100 kB)
By David Krakauer, Product Line Manager - MS-2234: Anatomy of a Digital Isolator (pdf, 137 kB)
- Functional SPI Isolation (pdf, 680 kB)
- MS-2204: Power Blanking for Increased Accuracy Using isoPower Devices (pdf, 308 kB)
- MS-2155: Options and Solutions for Partitioning Isolated Power in Isolated RS-485 Nodes (pdf, 290 kB)
- MS-2124: Understanding AC Behaviors of High Speed ADCs (pdf, 276 kB)
-
Build a Smart Analog Process-Instrument Transmitter with Low-Power Converters and a Microcontroller
An analog transmitter is a field-mounted device that senses a physical parameter such as pressure or temperature and generates a current proportional to the measured variable in the standard range, 4 to 20 mA.
(Analog Transmitter, 10/28/2009) -
Vibration Analysis Using ADCs Keeps Industrial Equipment Working
(ECN, April 2010) -
High-resolution ADCs — an overview
The dramatic reduction in the cost of high-resolution ADCs brings a number of benefits to designers.
(Electronic Products, 4/23/2010) -
Save space, cost, and power in multichannel PLCs with quad 16-Bit voltage/current-output DACs (Part 1 of 2)
EE Times, July 2010 -
Digital Isolator Simplifies USB Isolation in Medical and Industrial Applications
Analog Dialogue, Volume 43 – June 2009 -
NAppkin Note: Building an Isolated USB Cable
(pdf, 108 kB)
By Mark Cantrell, Applications Engineer -
NAppkin Notes: Isolating USB with SPI
(pdf, 128 kB)
By Mark Cantrell, Applications Engineer -
Simplifying Design of Industrial Process-Control Systems with PLC Evaluation Boards (Part 1 of 2)
PLC evaluation board applications for industrial process-control systems are diverse, ranging from simple traffic control to complex electrical power grids, from environmental control systems to oil-refinery process control.
(Industrial Control DesignLine, 8/24/09) -
PLC Evaluation Board Simplifies Design of Industrial Process Control Systems
(Analog Dialogue, Vol. 43, April 2009) -
iCoupler® Digital Isolators Protect RS-232, RS-485, and CAN Buses in Industrial, Instrumentation, and Computer Applications
(Analog Dialogue, Vol. 39, October 2005)
Analog Dialogue (4)
-
Quad 16-Bit Voltage-/Current-Output DACs Save Space, Cost, and Power in Multichannel PLCs
(Analog Dialogue, Volume 44 – July 2010) -
Digital Isolator Simplifies USB Isolation in Medical and Industrial Applications
Analog Dialogue, Volume 43 – June 2009 -
PLC Evaluation Board Simplifies Design of Industrial Process Control Systems
(Analog Dialogue, Vol. 43, April 2009) -
iCoupler® Digital Isolators Protect RS-232, RS-485, and CAN Buses in Industrial, Instrumentation, and Computer Applications
(Analog Dialogue, Vol. 39, October 2005)
Design Handbooks (1)
- Sensor Signal Conditioning - Temperature Sensors (pdf, 232 kB)
Overview (3)
- The Five Motion Senses: Using MEMS Inertial Sensing to Transform Applications (pdf, 207 kB)
- Selection Guide: Temperature Sensors (pdf, 807 kB)
- Industrial Automation Solutions (pdf, 6110 kB)
Product Highlights (1)
Solutions Bulletins (2)
- Industrial ICs Solutions Bulletin, Volume 10, Issue 8 (pdf, 4250 kB)
- Test & Instrumentation Solutions Bulletin, Volume 10, Issue 3 (pdf, 1334 kB)
User Guides (15)
-
UG-492: Evaluating the iCoupler ADuM4470, ADuM4471, ADuM4472, ADuM4473, and ADuM4474 Isolated Switching Regulators with Integrated Feedback
(pdf, 367 kB)
-
UG-559: Evaluating the AD8338 Low Power VGA
(pdf, 264 kB)
- UG-412: Evaluating the ADP7182 Low Noise, Linear Regulator (pdf, 349 kB)
- UG-414: Evaluating the ADP196 High-Side Load Switch (pdf, 208 kB)
- UG-513: Evaluating the AD8237 Micropower, Zero Drift, True Rail-to-Rail Instrumentation Amplifier and the AD8420 Wide Supply Range, Micropower, Rail-to-Rail Instrumentation Amplifier (pdf, 221 kB)
- UG-478: Evaluation Board for the AD7176-2—24-Bit, 250 kSPS Sigma-Delta ADC with 20 μs Settling (pdf, 3378 kB)
- UG-367: Using the ADuCM360/ADuCM361 Low Power, Precision Analog Microcontroller with Dual Sigma-Delta ADCs, ARM Cortex-M3 (pdf, 1642 kB)
- UG-464: Evaluating the ADM4168E ±15 kV ESD Protected Dual RS-422 Transceiver (pdf, 279 kB)
- UG-409: Evaluation Board for the AD7091R Analog-to-Digital Converter (pdf, 1662 kB)
- UG-441: Evaluating the AD5420 Single-Channel, 16-Bit, Serial Input, Current Source DAC (pdf, 414 kB)
- UG-407: ADP2441 Evaluation Board (pdf, 1618 kB)
- UG-422: AD8476 Differential Amplifier Evaluation Board for 8-Lead MSOP Package (pdf, 249 kB)
- UG-390: High Speed Evaluation Board for Half-Duplex M-LVDS Transceivers (ADN4690E, ADN4691E, ADN4694E, and ADN4696E) (pdf, 299 kB)
- UG-361: High Speed Evaluation Board for Full Duplex M-LVDS Transceivers (ADN4692E, ADN4693E, ADN4695E, and ADN4697E) (pdf, 574 kB)
- UG-250: Evaluation Board for 16-Bit, Serial Input, Loop-Powered 4 mA to 20 mA DAC (pdf, 540 kB)
