Application Notes (43)
- AN-1181: Using a MEMS Microphone in a 2-Wire Microphone Circuit (pdf, 132 kB)
- AN-1165: Op Amps for MEMS Microphone Preamp Circuits (pdf, 165 kB)
- AN-1157: Tuning the Extended Kalman Filter in the ADIS16480 (pdf, 373 kB)
- AN-1146: ADIS16334 Mounting/Mechanical Design Guidelines and Examples (pdf, 349 kB)
- AN-1140: Microphone Array Beamforming (pdf, 198 kB)
- AN-1124: Recommendations for Sealing Analog Devices, Inc., Bottom-Port MEMS Microphones from Dust and Liquid Ingress (pdf, 111 kB)
- AN-1112: Microphone Specifications Explained (PDF, 139 kB)
- AN-1087: Thermocouple Linearization When Using the AD8495/AD8496/AD8497 (PDF, 126 kB)
- AN-1068: Reflow Soldering of the MEMS Microphone (pdf, 119 kB)
- AN-1078: ADXL346 Quick Start Guide (pdf, 97 kB)
- AN-1077: ADXL345 Quick Start Guide (pdf, 99 kB)
- AN-1063: Oversampling Technique to Improve ADXL345 Output Resolution (pdf, 89 kB)
- AN-1073: Soldering Recommendations for the Ceramic Vertical Mount Package (pdf, 92 kB)
- AN-1003: Recommendations for Mounting and Connecting Analog Devices, Inc., Bottom-Ported MEMS Microphones (pdf, 118 kB)
- AN-1057: Using an Accelerometer for Inclination Sensing (pdf, 168 kB)
- AN-1045: iSensor® IMU Mounting Tips (pdf, 88 kB)
- AN-1049: Calibrating iMEMS® Gyroscopes (pdf, 78 kB)
- AN-1042: ADIS16130 Quick Start Guide and Bias Optimization Tips (pdf, 169 kB)
- AN-0989: Transitioning from ADXL202 to ADXL213 or ADXL203 (pdf, 76 kB)
- AN-1041: iSensor® IMU Quick Start Guide and Bias Optimization Tips (pdf, 107 kB)
- AN-1025: Utilization of the First In, First Out (FIFO) Buffer in Analog Devices, Inc. Digital Accelerometers (pdf, 138 kB)
- AN-942: Optimizing MEMS Gyroscope Performance with Digital Control (pdf, 114 kB)
- AN-942: Optimizing MEMS Gyroscope Performance with Digital Control (pdf, 129 kB)
- AN-900: Enhancing the Performance of Pedometers Using a Single Accelerometer (pdf, 208 kB)
- AN-918: Motionless Bandwidth Test for MEMS Sensors (pdf, 71 kB)
- AN-892: Temperature Measurement Theory and Practical Techniques (pdf, 733 kB)
- AN-876: Replacing Nationals LM75 with the Analog Devices, Inc. ADT75 (pdf, 107 kB)
- AN-767: Using Absolute Output iMEMS® Gyroscopes with Ratiometric ADCs (pdf, 43 kB)
-
AN-661: ADuC814 to ADM1032 via I2C® Interface
(pdf, 0 kB)
Even though the ADuC814 has an on-chip ±1.5°C temperature sensor, configured through the on-board ADC registers, it is often required that a remote or external temperature sensor be used.- AN-661 Accompanying Source Code (zip, 3 kB)
- AN-688: Phase and Frequency Response of iMEMS® Accelerometers and Gyros (pdf, 135 kB)
- AN-652: Considerations for Soldering Accelerometers in LCC-8 Packages onto Printed Circuit Boards (pdf, 396 kB)
- AN-604: Using the ADXL202 Duty Cycle Output (pdf, 529 kB)
-
AN-369: Thermocouple Signal Conditioning Using the AD594/AD595
(pdf, 108 kB)
This application note reviews thermocouple basics and illustrates circuit designs for thermocouple signal conditioning using the AD594/AD595. - AN-274: Taking the Uncertainty Out of Thermocouple Temperature Measurement (With the AD594/AD595) (pdf, 643 kB)
-
AN-214: Ground Rules for High Speed Circuits
(pdf, 356 kB)
Layout and Wiring Are Critical in Video Converter Circuits. -
AN-588: AD7416/AD7417/AD7418 Power-On Reset Circuit
(pdf, 29 kB)
If a large number of decoupling capacitors are used on the VDD line, re-applying power before VDD has discharged to 0 V can cause the AD7416/AD7417/AD7418 to reset into an unknown. state. - AN-273: Use of the AD590 Temperature Transducer in a Remote Sensing Application (pdf, 416 kB)
-
AN-272: Accuracies of the AD590
(pdf, 32 kB)
Tables show maximum errors by grade for applications involving limited temperature spans. - AN-561: AD7416 Connects to the PIC16F84 via Emulated I²C™ Interface (pdf, 74 kB)
-
AN-395: Interfacing the AD22100 Temperature Sensor to a Low Cost Single-Chip Microcontroller
(pdf, 116 kB)
The AD22100 is a new monolithic silicon temperature sensor with several unique attributes. These attributes make it easier to interface the AD22100 to microcontrol-lers than other temperature sensor ICs. - AN-603: A Compact Algorithm Using the ADXL213 Duty Cycle Output (pdf, 176 kB)
- AN-602: Using the ADXL202 in Pedometer and Personal Navigation Applications (pdf, 81 kB)
- AN-600: Embedding Temperature Information in the ADXL202's PWM Outputs (pdf, 81 kB)
Circuit Note (12)
- CN-0172: High Accuracy Multichannel Thermocouple Measurement Solution (pdf, 319 kB)
- CN0274:Ultralow Power Standalone Motion Switch (pdf, 253 kB)
- CN0281: Automotive SENT Interface-Based Thermocouple Temperature Sensor with Cold Junction Compensation Using the ADuC7060/ADuC7061 Precision Analog Microcontroller (pdf, 288 kB)
- CN-0271:K-Type Thermocouple Measurement System with Integrated Cold Junction Compensation (pdf, 565 kB)
- CN-0208: High Performance Digital MEMS Microphone's Simple Interface to SigmaDSP Audio Processor with I2S Output (pdf, 361 kB)
- CN-0262: Low Noise Analog MEMS Microphone and Preamp with Compression and Noise Gating (pdf)
- CN-0266: High Performance Digital MEMS Microphone Standard Digital Audio Interface to Blackfin DSP (pdf, 139 kB)
- CN-0189: Tilt Measurement Using a Dual Axis Accelerometer (pdf, 285 kB)
- CN-0209: Fully Programmable Universal Analog Front End for Process Control Applications (pdf, 150 kB)
- CN-0207: High Performance iMems Analog Microphone's Simple Interface to SigmaDSP Audio Codec (pdf, 126 kB)
- CN-0133: Sensing Low-g Acceleration Using the ADXL345 Digital Accelerometer Connected to the ADuC7024 Precision Analog Microcontroller (pdf, 112 kB)
- CN-0078: iMEMS Digital Microphone Simplifies the Interface to a SigmaDSP Audio Codec (pdf)
White Papers (1)
