New Products for Switches/Multiplexers | Analog Devices

ADG1419, 2.1 Ω Max On Resistance ±15 V/12 V/±5 V iCMOS SPDT Switch

Tue, 03 Nov 2009 16:41:24 GMT

The ADG1419 is a monolithic iCMOS® device containing a single-pole/double-throw (SPDT) switch. An EN input on the LFCSP package is used to enable or disable the device. When disabled, all channels are switched off.

The iCMOS (industrial CMOS) modular manufacturing

ADG1607, 4.5 Ω R_ON, 16-Channel, Differential 8-Channel, ±5V, +12 V, +5 V, and +3.3 V Multiplexers

Tue, 03 Nov 2009 15:18:16 GMT

The ADG1606 and ADG1607 are monolithic iCMOS® analog multiplexers comprising of 16 single channels and eight differential channels, respectively. The ADG1606 switches one of 16 inputs to a common output, as determined by the 4-bit binary address lines (A0, A1, A2, and A3). The ADG1607 switches one of eight differential inputs to a

ADG1606, 4.5 Ω R_ON, 16-Channel, Differential 8-Channel, ±5V, +12 V, +5 V, and +3.3 V Multiplexers

Tue, 03 Nov 2009 15:14:41 GMT

ADN4604, X-STREAM™ 4.25 Gbps, 16 × 16, Digital Crosspoint Switch

Fri, 30 Oct 2009 14:09:01 GMT

The ADN4604 is a 16 × 16 asynchronous, protocol agnostic, digital crosspoint switch, with 16 differential PECL-/CML-compatible inputs and 16 differential CML outputs.

The ADN4604 is optimized for nonreturn-to-zero (NRZ) signaling with data rates of up to 4.25 Gbps per port. Each port offers a fixed level of input equalization and programmable output swing and output

ADG1414, 9.5 Ω R_ON ±15 V/+12 V/±5 V iCMOS Serially-Controlled Octal SPST Switches

Tue, 27 Oct 2009 15:33:11 GMT

The ADG1414 is a monolithic complementary metal oxide semiconductor (CMOS) device containing eight independently selectable switches designed on an industrial CMOS (iCMOS®) process {this is our registered trademark, do you want to mention here: “...process developed by Analog Devices, Inc.?”}. iCMOS is a modular manufacturing process combining high voltage CMOS and bipolar

ADG1439, ±15 V/+12 V/±5 V, Dual 4 to 1 Multiplexer, Serially Controlled Matrix Switch

Tue, 27 Oct 2009 15:27:19 GMT

The ADG1438 and ADG1439 are CMOS analog matrix switches with a serially controlled 3-wire interface. The ADG1438 is an 8-channel matrix switch, whereas the ADG1439 is a dual 4-channel matrix switch.

The ADG1438/ADG1439 use a versatile 3-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI, QSPI™, MICROWIRE™, and DSP interface standards. The

ADG1438, ±15 V/+12 V/±5 V, Single 8 to 1 Multiplexer, Serially Controlled Matrix Switch

Tue, 27 Oct 2009 15:18:46 GMT

The ADG1438 and ADG1439 are CMOS analog matrix switches with a serially controlled 3-wire interface. The ADG1438 is an 8-channel matrix switch, whereas the ADG1439 is a dual 4-channel matrix switch.

The ADG1438/ADG1439 use a versatile 3-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI, QSPI™, MICROWIRE™, and DSP interface standards. The

ADG1423, 2.1 Ω Maximum On Resistance, ±15 V/+12/±5 V iCMOS Dual SPST Switches

Tue, 27 Oct 2009 15:08:13 GMT

The ADG1421/ADG1422/ADG1423 contain two independent single-pole/single-throw (SPST) switches. The ADG1421 and ADG1422 differ only in that the digital control logic is inverted. The ADG1421 switches are turned on with Logic 1 on the appropriate control input, and Logic 0 is required for the ADG1422. The ADG1423 has one switch with digital control logic similar to that of the ADG1421; the logic is

ADG1422, 2.1 Ω Maximum On Resistance, ±15 V/+12/±5 V iCMOS Dual SPST Switches

Tue, 27 Oct 2009 15:04:56 GMT

ADG1421, 2.1 Ω Maximum On Resistance, ±15 V/+12/±5 V iCMOS Dual SPST Switches

Tue, 27 Oct 2009 14:49:40 GMT

ADG1402, 1 Ω On Resistance, ±15 V/+12 V/±5 V, iCMOS SPST Switches

Tue, 27 Oct 2009 14:43:02 GMT

The ADG1401/ADG1402 contain a single-pole/single-throw (SPST) switch. Figure 1 shows that with a logic input of 1, the switch of the ADG1401 is closed and that of the ADG1402 is open. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked.

The iCMOS®

ADG1401, 1 Ω On Resistance, ±15 V/+12 V/±5 V, iCMOS SPST Switches

Tue, 27 Oct 2009 14:31:14 GMT

The iCMOS®

ADG1633, 4.5 Ω RON, Triple/Quad SPDT ±5 V, +12 V, +5 V, and +3.3 V Switches

Thu, 06 Aug 2009 10:20:14 GMT

The ADG1633 and ADG1634 are monolithic industrial CMOS (iCMOS®) analog switches comprising three independently selectable single-pole, double-throw (SPDT) switches and four independently selectable SPDT switches, respectively.

All channels exhibit break-before-make switching action that prevents momentary shorting when switching channels. An span style="text-decoration:

ADG1634, 4.5 Ω RON, Triple/Quad SPDT ±5 V, +12 V, +5 V, and +3.3 V Switches

Thu, 06 Aug 2009 10:14:02 GMT

All channels exhibit break-before-make switching action that prevents momentary shorting when switching

ADG1609, 4.5 Ω RON, 4-Channel ±5 V,+12 V, +5 V, and +3.3 V Multiplexer

Mon, 03 Aug 2009 15:24:48 GMT

The ADG1608/ADG1609 are monolithic CMOS analog multip-lexers comprising eight single channels and four differential channels, respectively. The ADG1608 switches one of eight inputs to a common output, as determined by the 3-bit binary address lines, A0, A1, and A2. The ADG1609 switches one of four differential inputs to a common differential output, as

ADG1608, 4.5 Ω RON, 8-Channel ±5 V,+12 V, +5 V, and +3.3 V Multiplexer

Mon, 03 Aug 2009 15:22:18 GMT

AD8155, 6.5 Gbps Dual Buffer Mux/Demux

Tue, 28 Jul 2009 14:00:31 GMT

The AD8155 is an asynchronous, protocol-agnostic, dual-lane 2:1 switch with a total of six differential CML inputs and six differential CML outputs. The signal path supports NRZ signaling with data rates up to 6.5 Gbps per lane. Each lane offers programmable receive equalization, programmable output pre-emphasis, programmable output levels, and loss-of-signal detection.

The nonblocking