Analog Devices offers the widest selection of high performance voltage references in the industry. Our products range from high accuracy, low noise for high end industrial applications to general purpose, low power for handheld, battery-powered applications. ADI is the ultimate source for design engineers looking for the perfect voltage reference that is cost effective, reliable, and dependable.
View the complete list of Operational Amplifiers and References qualified for Automotive applications.
The Analog Filter Wizard™ helps you design a low-pass, high-pass, band-pass or band-stop filter with actual op amps. It then simulates the filter’s performance with these op amps in real time. You can ask the tool to optimize for power, noise, or voltage range, and it will pick op amps and passive components appropriately. Or you can adjust the components manually yourself.
The photodiode web tool helps you select and design the best circuit for your application. To use the tool, enter the specifications of your light input, including intensity, spectral band, and the required signal bandwidth. These inputs will narrow down the available photodiode part numbers.
View all tools available for Analog Devices' Amplifiers products.
Search, compare and select products using our parametric selection tables.
The ADIsimADC tool is an aid to help in the selection of Analog to Digital Converterse (ADC's), perform evaluations and assist with troubleshooting. The tool uses typical data values to mathematically model the general behavior of the selected ADC. It allows a user to apply input signals, set encode (sample) rates and simulate FFT's on a selected ADC. It is useful for checking the SNR, SFDR, SINAD, THD, ENOB etc. of a selected ADC.
ADIsimDAC assists the user with finding Analog Devices' DACs and DAC Application Circuits. It takes user inputs along Typical Parametric Data to sort, select and suggest applicable DAC's, system components and circuit solutions.
View all tools available for Analog Devices' Data Converters products.
Search, compare and select products using our parametric selection tables.
ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded Gain, Noise Figure, IP3 and P1dB as well as total power consumption are calculated. The number of stages can be varied up to a maximum of 15. Additional stages can be inserted at any point in teh signal chain and individual stages can be temporarily disabled or deleted. The calculator can be switched between Transmit Mode and Receive Mode where calculations are presented output-referred and input-referred respectively.
The ADIsimPLL design tool is a comprehensive and easy-to-use PLL synthesizer design and simulation tool. All key non-linear effects that can impact PLL performance can be simulated, including phase noise, Fractional-N spurs, and anti-backlash pulse. ADIsimPLL design tool eliminates time-consuming iterations from the PLL/synthesizer development process.
View all tools available for Analog Devices' RF ICs.
Search, compare and select products using our parametric selection tables.
ADIsimPower™ Voltage Regulator Design Tool produces custom DC-DC converter designs in about one minute. The user enters 5 inputs and chooses to optimize for efficiency, PCB space, cost, or part count. Output is a complete schematic, BOM, efficiency plot, and performance summary. A PDF summary and a blank PCB is offered for each design to facilitate fast prototyping to verify the design.
ADI's digital PWM (pulse-width modulation) power control and management devices provide designers with a highly integrated circuit architecture and the flexibility to configure system power-supply parameters in a matter of minutes using an intuitive GUI (graphical user interface). Power design egnineers with no prior programming experience can use the GUI to monitor and quickly adjust power functions such as frequency, timing, voltage settings, and protection limits.
View all tools available for Analog Devices' Power Management products.
Search, compare and select products using our parametric selection tables.
| Part# | Vout | Initial Accuracy (%) | Ref Out TC (ppm/C) | 0.1-10 Hz Noise (µV p-p) | Reference Type | Automotive Qualified | Operating Temp Range | US Price 1000-4999 |
|---|---|---|---|---|---|---|---|---|
| ADR4520 | 2.048 | 0.02 | 2ppm/C | 1µV p-p | Series | - | -40 to +125 |
$ |
| ADR4525Reference Circuit Available | 2.5 | 0.02 | 2ppm/C | 1.25µV p-p | Series | - | -40 to +125 |
$ |
| ADR4530 | 3 | 0.02 | 2ppm/C | 1.6µV p-p | Series | - | -40 to +125 |
$ |
| ADR4533 | 3.3 | 0.02 | 2ppm/C | 2.1µV p-p | Series | - | -40 to +125 |
$ |
| ADR4540 | 4.096 | 0.02 | 2ppm/C | 2.7µV p-p | Series | - | -40 to +125 |
$ |
| ADR4550 | 5 | 0.02 | 2ppm/C | 2.8µV p-p | Series | - | -40 to +125 |
$ |
| ADR3412 | 1.2 | 0.1 | 8ppm/C | 8µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR3420 | 2.048 | 0.1 | 8ppm/C | 15µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR3433 | 3.3 | 0.1 | 8ppm/C | 25µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR3425 | 2.5 | 0.1 | 2.5ppm/C | 18µV p-p | Series | - | -40 to +125 |
$ |
| ADR3430 | 3 | 0.1 | 2.5ppm/C | 22µV p-p | Series | - | -40 to +125 |
$ |
| ADR3440 | 4.096 | 0.1 | 2.5ppm/C | 29µV p-p | Series | - | -40 to +125 |
$ |
| ADR3450 | 5 | 0.1 | 2.5ppm/C | 35µV p-p | Series | - | -40 to +125 |
$ |
| ADR827 | 1.25 | 0.4 | 15ppm/C | 8µV p-p | Series | - | -40 to +125 |
$ |
| ADR1581Reference Circuit Available | 1.25 | 0.12 | 50ppm/C | 4.5µV p-p | Shunt | - | -40 to +85 |
$ |
| ADR5040 | 2.048 | 0.1 | 10ppm/C | - | Shunt | - | -40 to +125 |
$ |
| ADR5041 | 2.5 | 0.1 | 10ppm/C | - | Shunt | - | -40 to +125 |
$ |
| ADR5043 | 3 | 0.1 | 10ppm/C | - | Shunt | - | -40 to +125 |
$ |
| ADR5044Reference Circuit Available | 4.096 | 0.1 | 10ppm/C | - | Shunt | - | -40 to +125 |
$ |
| ADR5045 | 5 | 0.1 | - | - | Shunt | - | -40 to +125 |
$ |
| ADR130 | +0.5/+1 Pin Programmable | 0.35 | 5ppm/C | 3µV p-p | Series | - | -40 to +125 |
$ |
| ADR121 | 2.5 | 0.12 | 3ppm/C | 10µV p-p | Series-Low Dropout | - | -40 to +125 | ** |
| ADR125Reference Circuit Available | 5 | 0.12 | 3ppm/C | 20µV p-p | Series | - | -40 to +125 | ** |
| ADR127Reference Circuit Available | 1.25 | 0.12 | 3ppm/C | 5µV p-p | Series | - | -40 to +125 |
$ |
| ADR1500 | 1.2875 | 0.2 | 170ppm/C | 5µV p-p | Shunt | - | -40 to +85 |
$ |
| ADR440 | 2.048 | 0.05 | 1ppm/C | 1µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR441Reference Circuit Available | 2.5 | 0.04 | 1ppm/C | 1.2µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR443 | 3 | 0.04 | 1ppm/C | 1.4µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR444Reference Circuit Available | 4.096 | 0.04 | 1ppm/C | 1.8µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR445Reference Circuit Available | 5 | 0.04 | 1ppm/C | 2.25µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR360 | 2.048 | 0.15 | 9ppm/C | 6.8µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR361 | 2.5 | 0.12 | 9ppm/C | 8.25µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR363 | 3 | 0.1 | 9ppm/C | 8.7µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR364 | 4.096 | 0.1 | 9ppm/C | 11µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR365 | 5 | 0.08 | 9ppm/C | 12.8µV p-p | Series-Low Dropout | Yes | -40 to +125 |
$ |
| ADR366 | 3.3 | 0.125 | 9ppm/C | 9.3µV p-p | Series-Low Dropout | Yes | -40 to +125 |
$ |
| ADR430 | 2.048 | 0.05 | 1ppm/C | 3.5µV p-p | Series | - | -40 to +125 |
$ |
| ADR431Reference Circuit Available | 2.5 | 0.04 | 1ppm/C | 3.5µV p-p | Series | - | -40 to +125 |
$ |
| ADR433 | 3 | 0.05 | 1ppm/C | 3.75µV p-p | Series | - | -40 to +125 |
$ |
| ADR434Reference Circuit Available | 4.096 | 0.04 | 1ppm/C | 6.25µV p-p | Series | - | -40 to +125 |
$ |
| ADR435Reference Circuit Available | 5 | 0.04 | 1ppm/C | 8µV p-p | Series | - | -40 to +125 |
$ |
| ADR06 | 3 | 0.1 | 3ppm/C | 10µV p-p | Series | - | -40 to +125 |
$ |
| ADR525 | 2.5 | 0.2 | 40ppm/C | 18µV p-p | Shunt | - | -40 to +125 |
$ |
| ADR530 | 3 | 0.2 | 40ppm/C | 22µV p-p | Shunt | - | -40 to +125 |
$ |
| ADR550 | 5 | 0.2 | 40ppm/C | 38µV p-p | Shunt | - | -40 to +125 |
$ |
| ADR510 | 1.0 | 0.35 | 70ppm/C | 4µV p-p | Shunt | - | -40 to +85 |
$ |
| ADR512Reference Circuit Available | 1.2 | 0.3 | 60ppm/C | 4µV p-p | Shunt | Yes | -25 to +85 |
$ |
| ADR03Reference Circuit Available | 2.5 | 0.1 | 3ppm/C | 10µV p-p | Series | - | -40 to +125 |
$ |
| ADR280Reference Circuit Available | 1.2 | 0.4 | 5ppm/C | 2.2µV p-p | Series | - | -40 to +85 |
$ |
| ADR392 | 4.096 | 0.12 | 9ppm/C | 7µV p-p | Series-Low Dropout | Yes | -40 to +125 |
$ |
| ADR395Reference Circuit Available | 5 | 0.1 | 9ppm/C | 8µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR01Reference Circuit Available | 10 | 0.05 | 3ppm/C | 20µV p-p | Series | - | -40 to +125 |
$ |
| ADR02Reference Circuit Available | 5 | 0.06 | 3ppm/C | 10µV p-p | Series | Yes | -40 to +125 |
$ |
| ADR423Reference Circuit Available | 3 | 0.04 | 1ppm/C | 1µV p-p | Series | - | -40 to +125 |
$ |
| ADR425 | 5 | 0.04 | 1ppm/C | 3.4µV p-p | Series | - | -40 to +125 |
$ |
| ADR420Reference Circuit Available | 2.048 | 0.05 | 1ppm/C | 1.75µV p-p | Series | - | -40 to +125 |
$ |
| ADR421Reference Circuit Available | 2.5 | 0.04 | 1ppm/C | 1.75µV p-p | Series | - | -40 to +125 |
$ |
| ADR380 | 2.048 | 0.24 | 5ppm/C | 5µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| ADR381Reference Circuit Available | 2.5 | 0.24 | 3ppm/C | 5µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| ADR391Reference Circuit Available | 2.5 | 0.16 | 9ppm/C | 5µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| ADR293 | 5 | 0.06 | 3ppm/C | 15µV p-p | Series | - | -40 to +125 |
$ |
| ADR291Reference Circuit Available | 2.5 | 0.08 | 3ppm/C | 8µV p-p | Series-Low Dropout | Yes | -40 to +125 |
$ |
| ADR292 | 4.096 | 0.07 | 3ppm/C | 12µV p-p | Series | - | -40 to +125 |
$ |
| AD1582 | 2.5 | 0.08 | 50ppm/C | 70µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| AD1583 | 3 | 0.1 | 50ppm/C | 85µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| AD1584 | 4.096 | 0.1 | 50ppm/C | 110µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| AD1585 | 5 | 0.1 | 50ppm/C | 140µV p-p | Series-Low Dropout | - | -40 to +125 |
$ |
| AD1580 | 1.2 | 0.08 | 50ppm/C | 5µV p-p | Shunt | - | -40 to +85 |
$ |
| REF191 | 2.048 | 0.1 | 2ppm/C | 20µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| REF198 | 4.096 | 0.05 | 2ppm/C | 40µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| REF192Reference Circuit Available | 2.5 | 0.08 | 2ppm/C | 25µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| REF193 | 3 | 0.33 | 10ppm/C | 30µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| REF194Reference Circuit Available | 4.5 | 0.044 | 2ppm/C | 45µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| REF196 | 3.3 | 0.3 | 10ppm/C | 33µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| REF195 | 5 | 0.2 | 2ppm/C | 50µV p-p | Series-Low Dropout | - | -40 to +85 |
$ |
| AD780Reference Circuit Available | 2.5 | 0.04 | 3ppm/C | 4µV p-p | Series-Multi/Select Out | - | -40 to +85 |
$ |
| AD680 | 2.5 | 0.2 | 20ppm/C | 8µV p-p | Series | - | -40 to +85 |
$ |
| AD688 | 10 | 0.02 | 1.5ppm/C | 6µV p-p | Series-Multi/Select Out | - | -55 to +125 |
$ |
| REF03 | 2.5 | 0.2 | 10ppm/C | 6µV p-p | Series | - | -40 to +85 |
$ |
| AD587 | 10 | 0.05 | 5ppm/C | 4µV p-p | Series | - | -55 to +125 |
$ |
| REF43 | 2.5 | 0.02 | 25ppm/C | 4µV p-p | Series | - | -40 to +85 |
$ |
| AD586Reference Circuit Available | 5 | 0.04 | 2ppm/C | 4µV p-p | Series | - | -55 to +125 |
$ |
| AD588 | 10 | 0.01 | 1.5ppm/C | 6µV p-p | Series-Multi/Select Out | - | -55 to +125 |
$ |
| AD589 | 1.2 | 1.2 | 10ppm/C | 5µV p-p | Shunt | - | -55 to +125 |
$ |
| AD584 | +2.5/+5/+7.5/+10 Prog | 0.05 | 5ppm/C | 50µV p-p | Series-Multi/Select Out | - | -55 to +125 |
$ |
| AD581 | 10 | 0.05 | 5ppm/C | 40µV p-p | Series | - | -55 to +125 |
$ |
| REF02 | 5 | 0.15 | 3ppm/C | 10µV p-p | Series | - | -55 to +125 |
$ |
| REF01 | 10 | 0.3 | 3ppm/C | 30µV p-p | Series | - | -55 to +125 |
$ |
| AD580 | 2.5 | 0.4 | 10ppm/C | 8µV p-p | Series | - | -55 to +125 |
$ |