content here.
content here.

EVAL-ADF70XX:  Development Platform for ADF702X family of ISM band Transceivers

This development platform provides the hardware and software to both evaluate and develop a low power, low data rate, wireless network using any of the ADF702X ISM band transceivers with the ADIismLink proprietary protocol. The kit provides the ADIismLink communication protocol intended for use in the license-free ISM bands and adheres to the regulations specified by ETSI (433MHz & 868MHz) and the ...More

EVAL-ADF70XX:  Development Platform for ADF702X family of ISM band Transceivers

Product Description

This development platform provides the hardware and software to both evaluate and develop a low power, low data rate, wireless network using any of the ADF702X ISM band transceivers with the ADIismLink proprietary protocol. The kit provides the ADIismLink communication protocol intended for use in the license-free ISM bands and adheres to the regulations specified by ETSI (433MHz & 868MHz) and the frequency hopping requirements of FCC 15.247 (902-928MHz).

The platform allows straightforward yet comprehensive configuration of the PHY and MAC layers of the ADIismLink protocol using the provided application software. This allows the user to investigate the trade-offs in protocol performance and also modify the protocol to suit their application. A restricted set of the ADIismLink source code is also provided allowing a developer to build their own application specific network.

The kit provides several demonstration networks, like a remote temperature sensor network, which allows the user to get a working wireless system up and running very quickly.

Kit Contents

The Development Kit order code is EVAL-ADF70XXMB2. This kit includes the following:

  • 1 x Controller board
  • 3.6V Lithium battery
  • USB cable
  • Serial Port Cable
  • Demo/Evaluation Software (ADF7020Demo.exe & ADF7020Registers.exe)
  • Application Development Code (restricted source code)
  • Comprehensive Documentation

N.B The following is also necessary for a working network and is available separately:

  • 1 x ADF702X RF Module
    example:
    915MHz optimized: EVAL-ADF7020DB1
    868MHz optimized: EVAL-ADF7020DB2
    433MHz optimized: EVAL-ADF7020DB3

For a full working network with 1 Base Unit and 2 End Points the following is required:

  • 3 x EVAL-ADF70XXMB2
  • 3 x EVAL-ADF7020DBX (X=1,2 or 3)

Development Tool Updates

Software

  • Application Software
    - Latest version of ADF7020Demo.exe
    - ADF7020Registers.exe
    - and corresponding DLLs
    Download (zip, 75,712 bytes)

Documentation

  • Quick Start Guide
    Download (pdf, 397,258 bytes)

  • Hardware Schematics
    Download (pdf, 701,327 bytes)

RESOURCES & TOOLS

What is your task? Try Lead the Way AdvisorTM BETA
Eb

EVALUATION BOARDS & DEVELOPMENT KITS

Ts

TOOLS, SOFTWARE & SIMULATION MODELS

  • ADIismLink - ETSI 868/433MHz duty cycled protocol and FCC 902-928MHz Frequency Hopping protocol.
  • Low power, duty cycled protocol intended mainly for wireless sensor, telemetry and alarm applications.
  • Star Network Topology, 1 Base Unit & up to 255 remote End Points.
  • PHY and MAC layers of ADIismLink highly configurable in application software.
  • ADIismLink restricted source code provided to allow user specific applications to be developed.
  • Several demonstration networks provided including a temperature sensor network.
  • Allows out of the box range testing.
  • Detailed documentation explaining the ADIismLink protocol, hardware, and application software.

EVAL-ADF70XX

EVAL-ADF70XX
EVAL-ADF70XX

Pricing, Packaging & Availability

Print Table
back to top

Help

Model
The model number is a specific version of a generic that can be purchased or sampled.

Status
Status indicates the current lifecycle of the product. This can be one of 4 stages:
  • Pre-Release: The model has not been released to general production, but samples may be available.
  • Production: The model is currently being produced, and generally available for purchase and sampling.
  • Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
  • Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).
Package Description
The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count
Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

Temperature Range
This is the acceptable operating range of the device. The various ranges specified are as follows:
  • Commercial: 0 to +70 degrees Celsius
  • Military : -55 to +125 degrees Celsius
  • Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
  • Automotive: -40 to +125 degrees Celsius
Price
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

Production Availability
This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

RoHS Compliant
Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.

View PCN
This is the list of Product Change Notifications (PCN) published on the web for this model. Click on the link to access PCN Information.Only select pre-2009 PCN�s are available on-line. To obtain a pre-2009 PCN, contact your ADI Sales Rep. For more information on ADI's PCN process, please visit our PCN Policy Statement page

*The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
**Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.