New Products for RF/IF Components | Analog Devices

ADF5001, 4 GHz to 18 GHz Divide-by-4 Prescaler

Fri, 06 Nov 2009 05:32:59 GMT

The ADF5001 prescaler is a low noise, low power, fixed RF divider block that can be used to divide down frequencies as high as 18 GHz to a lower frequency suitable for input into a PLL IC, such as the ADF4156 or ADF4106. The ADF5001 provides a divide-by-4 function. The ADF5001 operates off

ADL5356, 1200 MHz to 2500 MHz, Dual-Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

Wed, 04 Nov 2009 18:23:24 GMT

The ADL5356 uses a highly linear, doubly balanced, passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow single-ended operation. The ADL5356 incorporates the RF baluns, allowing for optimal performance over a 1200 MHz to 2500 MHz RF input frequency range. Performance is optimized for RF frequencies from 1700 MHz to 2500 MHz using a low-side LO and RF

AD6657, Quad IF Receiver

Wed, 04 Nov 2009 18:14:22 GMT

The AD6657 is an 11-bit, 200 MSPS, quad-channel intermediate frequency (IF) receiver specifically designed to support multi-antenna systems in telecommunication applications where high dynamic range performance, low power, and small size are desired.

The device consists of four high performance analog-to-digital converters (ADCs) and noise shaping requantizer (NSR) digital blocks. Each ADC

AD8432, Dual-Channel Ultralow Noise Amplifier with Selectable Gain and Input Impedance

Wed, 04 Nov 2009 14:42:51 GMT

The AD8432 is a dual-channel, low power, ultralow noise amplifier with selectable gain and active impedance matching. Each amplifier has a single-ended input, differential output, and integrated input clamps. By pin strapping the gain setting pins, four accurate gains of G = 12.04 dB, 18.06 dB, 21.58 dB, and 24.08 dB (×4, ×8, ×12, and ×16) are possible. A bandwidth of 200 MHz at G = 12.04 dB makes

AD6642, Dual IF Receiver

Wed, 04 Nov 2009 06:35:05 GMT

The AD6642 is an 11-bit, 200 MSPS, dual-channel intermediate frequency (IF) receiver specifically designed to support multi-antenna systems in telecommunication applications where high dynamic range performance, low power, and small size are desired.

The device consists of two high performance analog-to-digital converters (ADCs) and noise shaping requantizer (NSR) digital blocks. Each ADC

ADL5367, 500 MHz to 1700 MHz Balanced Mixer, LO Buffer and RF Balun

Tue, 03 Nov 2009 15:36:00 GMT

The ADL5367 uses a highly linear, doubly balanced passive mixer core along with integrated RF and LO balancing circuitry to allow for single-ended operation. The ADL5367 incorporates an RF balun, allowing optimal performance over a 500 MHz to 1700 MHz RF input frequency range. Performance is optimized for RF frequencies from 500 MHz to 1200 MHz using a high-side LO and for RF frequencies from 900

ADL5365, 1200 MHz to 2500 MHz Balanced Mixer, LO Buffer and RF Balun

Tue, 03 Nov 2009 15:21:38 GMT

The ADL5365 uses a highly linear, doubly balanced passive mixer core along with integrated RF and LO balancing circuitry to allow for single-ended operation. The ADL5365 incorporates an RF balun, allowing for optimal performance over a 1200 MHz to 2500 MHz RF input frequency range using high-side LO injection for RF frequencies from 1700 MHz to 2500 MHz and low-side injection for frequencies from

ADF4602, Single-Chip, Multiband 3G Femtocell Transceiver

Mon, 26 Oct 2009 14:50:26 GMT

The ADF4602 is a 3G transceiver integrated circuit (IC) offering unparalleled integration and feature set. The IC is ideally suited to high performance 3G femtocells providing cellular fixed mobile converged (FMC) services. With only a handful of external components, a full multiband transceiver is implemented.

UMTS Band 1 through Band 6 and Band 8 through Band 10 are supported in a single

ADL5601, 50 MHz to 4.0 GHz RF/IF Gain Block

Wed, 23 Sep 2009 16:32:59 GMT

The ADL5601 is a broadband, 15 dB linear amplifier that operates at frequencies up to 4.0 GHz. The device can be used in a wide variety of cellular, cable television (CATV), military, and instru-mentation equipment.

The ADL5601 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3

ADL5380, 400 to 6000 MHz Quadrature Demodulator

Tue, 11 Aug 2009 16:55:39 GMT

The ADL5380 is a broadband quadrature I-Q demodulator that covers an RF/IF input frequency range from 400 MHz to 6 GHz. With a NF = 10.9 dB, IP1dB = 11.6 dBm, and IIP3 = 29.7 dBm @ 900 MHz, the ADL5380 demodulator offers outstanding dynamic range suitable for the demanding infrastructure direct-conversion requirements. The differential RF inputs provide a well-behaved broadband input impedance of

ADL5357, 500 MHz to 1700 MHz Balanced Mixer with LO Buffer, IF Amp, and RF Balun

Tue, 11 Aug 2009 15:32:45 GMT

The ADL5357 uses a highly linear, doubly balanced passive mixer core along with integrated RF and LO balancing circuitry to allow for single-ended operation. The ADL5357 incorporates an RF balun, allowing for optimal performance over a 500 MHz to 1700 MHz RF input frequency range using high-side LO injection for RF frequencies from 500 MHz to 1200 MHz and low-side injection for frequencies from

ADL5355, 1200 MHz to 2500 MHz Balanced Mixer with LO Buffer, IF Amp, and RF Balun

Tue, 11 Aug 2009 14:43:35 GMT

The ADL5355 uses a highly linear, doubly balanced passive mixer core along with integrated RF and LO balancing circuitry to allow for single-ended operation. The ADL5355 incorporates an RF balun, allowing for optimal performance over a 1200 MHz to 2500 MHz RF input frequency range using low-side LO injection for RF frequencies from 1700 MHz to 2500 MHz and high-side LO injection for RF frequencies

ADL5602, 50 MHz to 4.0 GHz RF/IF Gain Block

Wed, 24 Jun 2009 13:55:34 GMT

The ADL5602 is a broadband 20 dB linear amplifier that operates at frequencies up to 4 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment.

The ADL5602 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3 specifications