Fractional-N Frequency Synthesizer
A key feature of the ADF4154 is the fast-lock mode with a builtin timer. The user can program a predetermined count-down time value so that the PLL will remain in wide bandwidth mode, instead of having to control this time externally.
Control of all on-chip registers is via a simple 3-wire interface. The device operates with a power supply ranging from 2.7 V to 3.3 V, and can be powered down when not in use.
Comparable Parts Click to see all in Parametric Search
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
This page contains ordering information for the evaluation board used to evaluate the ADF4154 Fractional-N Frequency Synthesizer.
This evaluation board requires an SDP Controller board for connection to the PC. The SDP controller board connects to the PC via USB 2.0. The evaluation board will connect to the SDP controller board. The evaluation board cannot be connected directly to the PC. The evaluation software running on the PC will communicate through the SDP Controller board, to the evaluation board. The SDP Controller board is a separate list item in the ordering guide below (EVAL-SDP-CS1Z). If you have not previously purchased an SDP Controller board, please do so to ensure a full evaluation setup.
Recommended Linear Regulators
Recommended Divide-by-4 Prescaler
- For a low noise, low power, fixed RF block , we recommend the ADF5001 .
Recommended PLL Active Filter
- For an ultralow noise, rail-to-rail amplifier , we recommend the OP184 .
Product Selection Guide
RF Source Booklet
RF IC Product Overview
Phase Locked Loops for High-Frequency Receivers and Transmitters – Part 1
Phase-Locked Loops for High-Frequency Receivers and Transmitters - Part 2
Phase Locked Loops for High-Frequency Receivers and Transmitters – Part 3