Dual Channel High IP3 100 MHz TO 6 GHz Active Mixer

Manufactured by:

Product Details

The ADL5802 uses high linearity, double-balanced, active mixer cores with integrated LO buffer amplifiers to provide high dynamic range frequency conversion from 100 MHz to 6 GHz. The mixers benefit from a proprietary linearization architecture that provides enhanced input IP3 performance when subject to high input levels. A bias adjust feature allows the input linearity, SSB noise figure, and dc current to be optimized using a single control pin. The high input linearity allows the device to be used in demanding cellular applications where in-band blocking signals may otherwise result in degradation in dynamic performance. The balanced active mixer arrangement provides superb LO to RF and LO to IF leakage, typically better than −30 dBm.

The IF outputs are designed for a 200 Ω source impedance and provide a typical voltage conversion gain of 7.6 dB when loaded into a 200 Ω load.

The ADL5802 is fabricated using a SiGe high performance IC process. The device is available in a compact 4 mm × 4 mm, 24-lead LFCSP package and operates over a −40°C to +85°C temperature range. An evaluation board is also available.


  • Cellular base station receivers
  • Main and diversity receiver designs
  • Radio link downconverters
  • Data Sheet, Rev 0, 11/2009

    Product Lifecycle

    icon-recommended Recommended for New Designs

    This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

    Evaluation Kits


    X +


    EVAL-ADL5802 Circuit Diagram

    Product Details

    ADL5802-EVALZ is a fully populated, 4-layer evaluation board fabricated using the Rogers RO 3003 material and is powered by a single supply in the 4.75 V to 5.25 V range. The RF, LO and IF ports are  configured for single-ended signaling via a balun transformer. The board provides smaller balun footprints for evaluation at higher frequencies. In addition, the board offers the capability to configure bias settings, IF filtering and matching schemes.

    Tools & Simulations

    X +

    Design Tools

    Product Recommendations

    X +
    ADL5802 Companion Parts

    Recommended RF/IF Differential Amplifiers

    • For ultralow distortion and adjustable gain with external resistor: AD8352.
    • For adjustable gain with external resistor: AD8351.
    • For a differential input/output IF VGA: AD8370, AD8375, ADL5336.
    • For ultralow distortion, pin strappable gain adjust: ADL5561.

    Recommended PLL's

    • For higher performance, higher frequency and faster locktimes: ADF4106, ADF4156.
    • For high performance with integrated VCO: ADF4350.

    Reference Materials

    X +

    Design Resources

    X +

    ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

    ADL5802 Material Declaration
    PCN-PDN Information Quality And Reliability Symbols and Footprints



    ADL5802 Discussions

    Didn't find what you were looking for? Ask the Analog community »

    Sample & Buy

    Check Inventory

    The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

    Price Table Help

    Evaluation Boards Pricing displayed is based on 1-piece.
    Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.