High Performance, Narrow-Band Transceiver IC
The ADF7021-V is designed to operate in both the license-free ISM bands and in the licensed bands from 80 MHz to 960 MHz.
To minimize RF feedthrough and spurious emissions, the external VCO operates at 2× or 4× the desired RF frequency; the ADF7021-V supports a maximum VCO frequency operation of 1920 MHz. The 4× VCO operation is programmable by enabling an additional on-chip divide-by-2 outside the RF synthesizer loop and offers improved phase noise performance.
As with the ADF7021-N receiver, the IF filter bandwidths of 9 kHz, 13.5 kHz, and 18.5 kHz are supported, making the ADF7021-V ideally suited to worldwide narrow-band telemetry applications.
The part has both Gaussian and raised cosine transmit data filtering options to improve spectral efficiency for narrow-band applications. It is suitable for circuit applications targeted at the following:
A complete transceiver can be built using a small number of discrete external components, making the ADF7021-V very suitable for area-sensitive, high performance driven applications.
See data sheet for more information.
- Narrow-band, short range device (SRD) standards
ETSI EN 300 220
FCC Part 90 (meets
Emission Mask D requirements)
FCC Part 95
- Wireless Metering
- Narrow-band wireless telemetry
Comparable Parts Click to see all in Parametric Search
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
This page contains ordering information for the evaluation board used to evaluate the ADF7021-V High Performance, Narrow-Band Transceiver IC.
Solutions Bulletins & Brochures
Emerging Energy Applications Solutions Bulletin, Volume 10, Issue 4
Design, Simulate, and Document Proprietary Wireless Systems
The broad acceptance of standards developed for short range wireless connectivity has been one of the notable...
Third Party Partner Program
Short Range Transceivers Third Party Developers
The ADF701x Series of Transmitters and ADF702x Series of Transceivers from ADI are suitable for automatic meter...
Low Power, Low Cost, Wireless ECG Holter Monitor
Wireless Technologies for Smart Meters: Focus on Water Metering
RF Meets Power Lines: Designing Intelligent Smart Grid Systems that Promote...
RF DesignLine, March 2010
The Use of Short Range Wireless in a Multi-Metering System
One of the more evident trends at the recent Metering Europe 2006 event in Copenhagen was that both meter...
Understand Wireless Short-Range Devices for Global License-Free Systems
Short-range devices (SRD) are radio transmitters that communicate unidirectionally or bidirectionally with little...
Wireless Short Range Devices and Narrowband Communications
The term “Short Range Device” (SRD) covers radio transmitters which provide either unidirectional or bi-directional...
Smart Metering Technology Promotes Energy Efficiency for a Greener World
The metering of electric power coming into the home is going electronic, replacing the long-established...
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
Didn't find what you were looking for?
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.