Overview

Features and Benefits

  • Charges 220µF to 320V in 3.7 Seconds from 5V (LT3420)
  • Charges 100µF to 320V in 3.5 Seconds from 5V (LT3420-1)
  • Charges Any Size Photoflash Capacitor
  • Supports Operation from Two AA Cells or Any Supply from 1.8V to 16V
  • Controlled Peak Switch Current:
    • 1.4A (LT3420)
    • 1.0A (LT3420-1)
  • Controlled Input Current:
    • 840mA (LT3420)
    • 450mA (LT3420-1)
  • Uses Standard Transformers
  • Efficient Flyback Operation (>75% Typical)
  • Adjustable Output
  • Automatic Refresh
  • Charge Complete Indicator
  • No High Voltage Zener Diode Required
  • No Output Voltage Divider Required
  • Small 10-Lead MSOP Package
  • Small 10-Lead (3mm × 3mm) DFN Package

Product Details

The LT3420/LT3420-1 charge high voltage photoflash capacitors quickly and efficiently. Designed for use in both digital and film cameras, these devices use a flyback topology to achieve efficiencies up to four times better than competing flash modules. A unique adaptive off-time control algorithm* maintains current-limited continuous mode transformer operation throughout the entire charge cycle, eliminating the high inrush current often found in modules.

The LT3420/LT3420-1 output voltage sensing scheme* monitors the flyback voltage to indirectly regulate the output voltage, eliminating an output resistor divider or discrete zener diode. This feature allows the capacitor to be held at a fully charged state without excessive power consumption. Automatic refresh (which can be defeated) allows the capacitor to remain charged while consuming an average input current of about 2mA, at a user-defined refresh rate. A logic high on the CHARGE pin initiates charging, while the DONE pin signals that the capacitor is fully charged.

The LT3420/LT3420-1 are available in 10-Lead MSOP and (3mm × 3mm) DFN packages.

*Protected by U.S. Patents including 6518733.

Applications

  • Digital Camera Flash Unit
  • Film Camera Flash Unit
  • High Voltage Power Supplies

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (3)

Tools & Simulations

LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

To launch ready-to-run LTspice demonstration circuits for this part:

Step 1: Download and install LTspice on your computer.

Step 2: Click on the link in the section below to download a demonstration circuit.

Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.

LTspice

Models for the following parts are available in LTspice:

LT3420
LT3420-1

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LT3420 Discussions

Re: LT3420 as HV power supply. 
12 week(s) ago in Power By Linear
Re: LT3420 as HV power supply. 
13 week(s) ago in Power By Linear
LT3420 as HV power supply. 
13 week(s) ago in Power By Linear
LT3420 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.