Alternative Parts

  • LT3095
    LT3095

    Dual-Channel Low Noise Bias Generators

Overview

Features and Benefits

  • Generates Low Noise Bias Voltage from Single Cell Li-Ion Battery
  • Output Current: Up to 40mA
  • Low Output Ripple and Noise: <500μVP-P
  • Boost Regulator
    • 1MHz Operation (LT3048)
    • 2.2MHz Operation (LT3048-XX)
    • Integrated Schottky Diode
  • Low Dropout Linear Regulator
    • 1.235V Feedback Voltage (LT3048)
    • Low Noise: <120μVRMS (10Hz to 100kHz)
    • 0.1% Load Regulation
  • Fixed 3.3V, 5V, 12V, 15V and Adjustable Output Options
  • Short-Circuit and Thermal Protection
  • Load Disconnect in Shutdown
  • Available in 2mm × 2mm DFN Package

Product Details

The LT3048 series generate low noise, low ripple bias supplies from input voltages of 2.7V to 4.8V.

The LT3048 includes a boost regulator and a LDO linear regulator. The boost regulator provides power to the linear regulator.

The boost regulator output voltage is regulated to 1.1V above the LDO output, optimizing LDO ripple rejection and transient response. Fixed frequency operation and current mode control allow the use of very small inductors and results in low, predictable output ripple.

The linear regulator in the LT3048 generates a programmable output and the LT3048-XX generate fixed output voltages. High power supply ripple rejection combined with a low noise internal reference results in less than 500μVP-P output ripple and noise.

The LT3048 is available in a 8-lead 2mm × 2mm DFN package.

Applications

  • Sensor Bias
  • Op Amp Supply

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (2)

Tools & Simulations

LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

To launch ready-to-run LTspice demonstration circuits for this part:

Step 1: Download and install LTspice on your computer.

Step 2: Click on the link in the section below to download a demonstration circuit.

Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.

LTspice

Models for the following parts are available in LTspice:

LT3048
LT3048-12
LT3048-15
lt3048-3
LT3048-3.3
LT3048-5

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LT3048 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.