Overview

Features and Benefits

  • Input voltage range: 2.3 V to 5.5 V 
  • One 1.2 A buck regulator 
  • Two 300 mA LDOs 
  • 20-lead, 4 mm × 4 mm LFCSP package 
  • Overcurrent and thermal protection 
  • Soft start 
  • Undervoltage lockout 
  • Buck key specifications 
    • Output voltage range: 0.8 V to 3.8 V 
    • Current mode topology for excellent transient response 
    • 3 MHz operating frequency 
    • Peak efficiency up to 96% 
    • Uses tiny multilayer inductors and capacitors 
    • Mode pin selects forced PWM or auto PWM/PSM modes 
    • 100% duty cycle low dropout mode 
  • LDOs key specifications 
    • Output voltage range: 0.8 V to 5.2 V 
    • Low VIN from 1.7 V to 5.5 V 
    • Stable with 2.2 μF ceramic output capacitors 
    • High PSRR 
    • Low output noise 
    • Low dropout voltage 
    • −40°C to +125°C junction temperature range

Product Details

The ADP5040 combines one high performance buck regulator and two low dropout regulators (LDO) in a small 20-lead LFCSP to meet demanding performance and board space requirements.

The high switching frequency of the buck regulator enables the use of tiny multilayer external components and minimizes board space.

When the MODE pin is set to logic high, the buck regulator operates in forced pulse width modulation (PWM) mode. When the MODE pin is set to logic low, the buck regulator operates in PWM mode when the load is around the nominal value. When the load current falls below a predefined threshold the regulator operates in power save mode (PSM) improving the light-load efficiency. The low quiescent current, low dropout voltage, and wide input voltage range of the ADP5040 LDOs extend the battery life of portable devices. The ADP5040 LDOs maintain a power supply rejection greater than 60 dB for frequencies as high as 10 kHz while operating with a low headroom voltage.

Each regulator in the ADP5040 is activated by a high level on the respective enable pin. The output voltages of the regulators are programmed though external resistor dividers to address a variety of applications.

Product Lifecycle icon-recommended Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits (1)

Tools & Simulations

Design Tools

ADIsimPower™ Voltage Regulator Design Tool

ADIsimPower is the fastest and most accurate Power Management design tool. ADI's Design Center lets you design your power circuits in three easy steps.

5V uPMU BuckDesigner

Microsoft Excel download tool from ADIsimPower to generate a power supply design complete with a schematic, bill of materials, and performance specifications.

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

PCN-PDN Information

Discussions

ADP5040 Discussions

ADP5040 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.